Manuel d'utilisation / d'entretien du produit TVIP600 du fabricant TRENDnet
Aller à la page of 110
.
ii CONTENTS ABOUT THIS USER ’S GUIDE .................. ................................ ........................... .... ............ 1 INTRODUCTION ........................ ................................ ............................... .....
iii Reset ......................................................................................................................... ................ 60 Factory Reset ............................................. ...................................
TV -IP600/W Wireless Network Camer a 1 About This User’s Guide This User Guide provides instructions on how to install the TV-IP600/W Wireless Network camera and use it for camera monitoring applications. Camera monitor applications are accessible through an Ethernet or 802.
TV -IP600/W Wireless Network Camer a 2 1 Introduction Thank you for purchasing the TV-IP600/TV-IP600W Pan/Tilt (Wireless) Internet Camera, a standalone system that can be connected directly to an Ethernet or Fast Ethernet connection. The TV-IP600W also supports wireless transmis sions based on the IEEE 802.
TV -IP600/W Wireless Network Camer a 3 Unpacking the Package Open the shipping carton and carefully remove all items. Check that you have the following: • O ne TV-IP600 or TV-IP600W Internet Camera .
TV -IP600/W Wireless Network Camer a 4 Syst em Req uirem ents Networking • Local Area Network: 10Base-T Ethernet or 100Base-TX Fast Etherne t • Wireless Local Area Network: IEEE 802.
TV -IP600/W Wireless Network Camer a 5 Default Settings Use the default settings to access the web- based management software and live video display. Default configuration settings Username This is the Username you will be prompted to enter when you access the TV- IP600/W configuration screens using a Web browser.
TV -IP600/W Wireless Netw ork Camer a 6 Camera Hardware Components This section provides information about the Camera’s hardware components: Front Panel Components Front panel of TV-IP600/W LED Indicators LNK This LED indicator lights steady oran ge when a valid Etherne t link is established.
TV -IP600/W Wireless Netw ork Camer a 7 Rear Panel Components The power connection to the camera when fitted with the Infrared lens is split between the camera body and lens using the power connection adapter cable attached to the infrared lens. All other cables connect to the camera at the rear panel.
TV -IP600/W Wireless Netw ork Camer a 8 2 Installing the Camera The camera is intended for indoor use. The camera, the power adapter and power source should be protected from water and moisture, excessive heat, direct sunlight and cold.
TV -IP600/W Wireless Netw ork Camer a 9 Connect Ethernet Cable To connect the camera to your network, c onnect a Category 5 or better Ethernet cable to the network cable connector located on the camera’s left side panel, and then attach it to the network.
TV -IP600/W Wireless Netw ork Camer a 10 Reset Camera A manual reset can be conducted by following the procedure below. The reset button is located on the rear panel of the camera. To reset the system settings to factory defaults, please follow these steps: 1.
TV -IP600/W Wireless Netw ork Camer a 11 3 Security To ensure the highest level of security and prevent unauthorized usage of the Camera, the Administrator account has exclusiv e access to the System Administration configuration settings. The Administrator account can create up to 64 users and configure different privilege levels for each user.
TV -IP600/W Wireless Netw ork Camer a 12 4 Application The TV-IP600 / TV-IP600W camera can be applied in a wide range of applicati on s, including: • Monitoring of local and remote places and objects, such as construction sites, hospitals, amusement parks, schools and day-care centers by using a web browser.
TV -IP600/W Wireless Netw ork Camer a 13 5 Using the Utility This chapter describes the software utilities for the IP Camera, including how to set up your Camera with the utility. The SetupWizard has a user-friendly interface that allows you to setup the Camera easily.
TV -IP600/W Wireless Netw ork Camer a 14 2. The next window asks you whether you want to accept the License Agreement or not. • If you agree with the Lic e nsing Agreement, click the I Agree radio button and the Next > button.
TV -IP600/W Wireless Netw ork Camer a 15 5. The software will start to install. The following window appears, showing the progress of the installation: 6.
TV -IP600/W Wireless Netw ork Camer a 16 Launching the SetupWizard To launch the SetupWizard, click the SetupWizard icon on your desktop or go to Start > Programs > TRENDnet > SetupWizard > SetupWizard to start the appilcation. SetupWizard- Inst all Your Camera Connect the camera to your LAN using the provided RJ45 cable.
TV -IP600/W Wireless Netw ork Camer a 17 SetupWizard- Select Your Camera The following screen appears showing the cameras that have been found on yo ur network: Click on the camera you want to configure.
TV -IP600/W Wireless Netw ork Camer a 18 SetupWizard- Authentication On the following screen type in the ID and Password that you will use to configuring the camera settings: Type a User ID in the ID field. Type a password for the User in the Password field.
TV -IP600/W Wireless Netw ork Camer a 19 SetupWizard- Change Password The following screen allows you to change the default admi n password: Carry out the following if you want to change the admin pas.
TV -IP600/W Wireless Netw ork Camer a 20 SetupWizard- Select a Connection Option The following window allows you to specify the connection method used by your camera n etwork. Click the radio button of the network environment your camera is connected to.
TV -IP600/W Wireless Netw ork Camer a 21 SetupWizard – Select a Connection Option - PPPoE If your connection method is PPPoE, click the PPPoE radio button and click Next : The following window appears: Type the User Name used to connect to your PPPoE connection in the User Name field.
TV -IP600/W Wireless Netw ork Camer a 22 SetupWizard- Select a Connection Option- DH CP If your connection method is DHCP, click the DHCP rad io button and click Next :.
TV -IP600/W Wireless Netw ork Camer a 23 SetupWizard- Select a Connection Option- Fix e d IP If your connection method is Fixed IP, click the Fixed IP radio button: The following window appears: Type in the IP Address, Subnet Mask, Default Gateway, Primary DNS Server IP address and Secondary DNS Server IP Address in the appropri ate fields.
TV -IP600/W Wireless Netw ork Camer a 24 SetupWizard- Setup Wireless (For TV-IP600W only) After choosing your connection method, the following window appears: Choose if you want to connect to your camera using the wireless connection or not by clicking the appropriate radi o button.
TV -IP600/W Wireless Netw ork Camer a 25 SetupWizard- Setup Wireless (For TV-IP600W only) If you selected the option to use a wireless connection to connect to your camera the following window appears: Choose the Access Po in t you want to connect the camera to from the Available AP drop- down menu.
TV -IP600/W Wireless Netw ork Camer a 26 SetupWizard- Other Settings The following window allows you to configure additional camera settings: Type a name to help you identify the camera in the Camera Name field. Set the camera date and time from the Camera Time drop-down menus.
TV -IP600/W Wireless Netw ork Camer a 27 SetupWizard- Setting Up The Ca mera The following window appears, summarizing the network settings of your camera: When you have finished setting up the Camera click the Next button. To make any changes to your Camera settings, click the Previous button.
TV -IP600/W Wireless Netw ork Camer a 28 SetupWizard- Complete After the camera has restarted, the following window will appear: Click the hyper-link to connect to the camera web interface. If you want to setup an additional camera, click the Setup Another Camera button.
TV -IP600/W Wireless Netw ork Camer a 29 6 Using the Camera Web Manager The camera is easy to use and manage. Use a normal web browser to access the camera’s live video display, as well as the configuration software.
TV -IP600/W Wireless Netw ork Camer a 30 Login To access the web manager directly from a computer or on a network without a DHCP server running, use the default IP address of the camera in the browser address entry to access the web manager. Type http://192.
TV -IP600/W Wireless Netw ork Camer a 31 Administration Click the ADMINISTRATION link to view the menus in the Administration Menu direct ory. The following menus are available in the Administration Menu directory: Status System , Video , Wireless (only for TV-IP600W camera) , Net w ork and Active Users .
TV -IP600/W Wireless Netw ork Camer a 32 Status The following menus are available in the Status: System , Video , Wire le ss (only for TV-IP600W camera) , Network and Active Users .
TV -IP600/W Wireless Netw ork Camer a 33 Video Status Click the Video link from the column on the left hand-side to display the Video Status of your camera as shown on the screen below: Video Status d.
TV -IP600/W Wireless Netw ork Camer a 34 Wireless Status (for TV-IP600W only) Click the Wireless link from the column on the left hand-side to display the Wireless Status of your camera as shown on th.
TV -IP600/W Wireless Netw ork Camer a 35 Network Status Click the Network link from the column on the left hand-side to display the Network Status of your camera as shown on the screen below: Network .
TV -IP600/W Wireless Netw ork Camer a 36 Active Users Click the Active Users link from the column on the left hand-side to display the Active Users currently connected to your camera as shown on the s.
TV -IP600/W Wireless Netw ork Camer a 37 Configuration The following menus are available in the Configuration directory: System , Video , Wireless (only for TV-IP600W camera) , Netw ork , User , Date/Time , Upload and E-mail . To access a menu click the link of the item that you want to view.
TV -IP600/W Wireless Netw ork Camer a 38 The default setting for the Admin ID is “admin”. The maximum length allowed for the Admin ID is 12 (printable ASCII) characters. The default s etting for t he Admin Password is “password”.The maximum length allowed for t he admin password is 8 (printable ASCII) characters.
TV -IP600/W Wireless Netw ork Camer a 39 Video Settings Click the Video link from the column on the left hand-side to configure the image configuration of your camera.
TV -IP600/W Wireless Netw ork Camer a 40 • Saturation Control: Use the buttons to adjust the saturati on le vel. The default setting is 64 . • Light Frequency: Click the radio buttons to adjust the light frequency to suit the area the camera is viewing.
TV -IP600/W Wireless Netw ork Camer a 41 Wireless Setup (for TV-IP600W only) The TV-IP600W Wireless Network Camera supports normal wireless LAN functions for 802.
TV -IP600/W Wireless Netw ork Camer a 42 Wireless Interface Use the Wireless Interface menu to configure the Camera’s wireless interface. Wireless Interface menu • Connection M ode: Click a radio button to determine the type of wireless communication for the camera.
TV -IP600/W Wireless Netw ork Camer a 43 Encryption Use the Encryption menu to configure the Camera’s Encryption settings. Wireless Encryption menu • WEP Encryption: Wireless network communications can be intercepted easily. WEP (Wired Equivalent Priv acy) is an encryption method specified by the IEEE 802.
TV -IP600/W Wireless Netw ork Camer a 44 • WEP Key Format: If enabling W EP Encryption you should decide whether to use an ASCII or HEX format for your WEP Key. Use the radio buttons to choose an ASCII or HEX format for your WEP key and type the WEP keys used in the Key 1 ~ 4 fields.
TV -IP600/W Wireless Netw ork Camer a 45 Advanced Setting Use the Advanced Setting menu to configure the Camera’s advanced settings. Advanced Setting menu • Beacon Interval: Type a value to define the time interv al be tween two beacons being sent.
TV -IP600/W Wireless Netw ork Camer a 46 Network Settings Click the Network Setup link to view menus for IP network settings, PPP oE configuration, DDNS, HTTP port configuration and UPnP configuration.
TV -IP600/W Wireless Netw ork Camer a 47 TCP/IP • IP Address Mode: Click a radio button to define the IP Address Mode: Fixed IP You can select this option and enter the IP address directly. The default settings are: • IP Address – 192.168.10.30 • Subnet Mask – 255.
TV -IP600/W Wireless Netw ork Camer a 48 User Use the User menus to add, edit and delete users for your camera. User menu User Access Control The Administrator has the authority to create additional users on the Camera and the privileges they have when accessing the Camera with the management software.
TV -IP600/W Wireless Netw ork Camer a 49 Define Users Use this section to add new users and define the privileges of the new user. Define Users menu • Add User: Type a name for the new user in the User Name field, a password in the Password field.
TV -IP600/W Wireless Netw ork Camer a 50 Date/Time Use the Date/Time menu to set the Camera’s time settings Date/Time menu Date/Time Setting Use the radio buttons to specify if the Camera should set.
TV -IP600/W Wireless Netw ork Camer a 51 Upload Use the Upload menu to setup the configuration fo r the FTP Server, schedule FTP Server Uploads and configure manual FTP Server Uploads.
TV -IP600/W Wireless Netw ork Camer a 52 FTP Server Use this section to configure the basic settings of your FTP server. FTP Server menu • Host Address: Use this field to type the IP address of the target FTP server. • Port Number: Use this field to specify the port used by your FTP server.
TV -IP600/W Wireless Netw ork Camer a 53 Time Schedule Use this section to enable images to be uploaded to an FTP Server at regul ar intervals. Time Schedule menu • Enable upload image to FTP server: Tick the checkbox to enable images from the Camera to be uploaded to an FTP server.
TV -IP600/W Wireless Netw ork Camer a 54 • File: Since you may not upload only one image to t he FTP server, you can use this field to specify the fling rule. Use the radio buttons to s p ecify the option that you want to use. The available options are Overwrite , Date/Time Suffix and Sequence Number Suffix Up to .
TV -IP600/W Wireless Netw ork Camer a 55 E-mail Use the E-mail menu to setup the configuration of the E-mail account, time sc hedu le and manual operation settings.
TV -IP600/W Wireless Netw ork Camer a 56 E-mail Account Use this section to configure your E-mail Account configuration. E-mail Account settings • SMTP Server Address: SMTP (Simple Mail Transfer Protocol) is a protocol used for sending e-mail messages.
TV -IP600/W Wireless Netw ork Camer a 57 Time Schedule Use this section to section to enable images to be e-mailed to the specified e-mail account at regular intervals E-mail Time Schedule settings • Enable e-mail image to e-mail account server: Tick the checkbox to enable images from the Camera to be e-mailed to an e-mail recipient.
TV -IP600/W Wireless Netw ork Camer a 58 Manual Operation Use this section to E-mail Manual Operation settings • Enable e-mail image to e-mail account: Tick the checkbox to enable images from the Camera to be e-mailed to an e-mail recipient. • Interval: Type a value in seconds to determine the time interval between two images bei ng sent.
TV -IP600/W Wireless Netw ork Camer a 59 Tools The following menus are available in the Tools directory: FTP Server Test , E-mail Test , Reset , Factory Reset, Firmware Upgrade and Backup . To access a menu click the link of the item you want to view.
TV -IP600/W Wireless Netw ork Camer a 60 Reset This option allows you to restart your Camera. Reset menu Reset Device Clicking the Yes button will restart the Camera, retaining your sa ved sett ings, as if y ou were turning the device off and on. If you do not want to restart the Camera, exi t th is window without clicking Yes .
TV -IP600/W Wireless Netw ork Camer a 61 Firmware Upgrade When new firmware is available, you can upgrade it through this window. To upgrade the camera firmware, make sure the correct firmware file is located on your computer. Cli ck the Brow se button to locate the file.
TV -IP600/W Wireless Netw ork Camer a 62 Backup The Backup window allows you to Backu p or Restor e the Camera settings. Backup Settings menu Backup Device Configuration to File To save configuration settings for the camera to a file on a local hard disk, click the Backup button .
TV -IP600/W Wireless Netw ork Camer a 63 Help The Help window displays help topics for the Camera. About The About option displays the Camera’s model name and version.
TV -IP600/W Wireless Netw ork Camer a 64 Viewing Video The TV-IP600W allows you to view video images usi ng Ac tiveX or Java in your web browser. Click View Video – Active X or Java from the Welcome screen to access the v ideo images from yo ur browser.
TV -IP600/W Wireless Netw ork Camer a 65 Uploading/E-mailing Video In the View Video – Active X or Java windows, it is possible to turn the Upload Image and E-mail Image options ON of OFF . Simply click the correspondi ng ON or OFF buttons to turn the Upload Image or E-mail Image options ON or OFF .
TV -IP600/W Wireless Netw ork Camer a 66 Controlling the Camera You can control the Camera’s viewing angle using the control buttons on the left-hand side of the viewing window. Camera C ontro l Button s Adjusting the Viewing Angle To adjust the camera’s viewing angle, simply click the Up / Dow n / Left / Right buttons.
TV -IP600/W Wireless Netw ork Camer a 67 Storing Positions The Camera allows you to store positions that you want to monitor regularly, allowing you to quickly move the Camera’s lens to focus on objects that you want to monitor regularly.
TV -IP600/W Wireless Netw ork Camer a 68 7 IPView Pro 2.0 This section describes the how to setup a camera using the IPView Pro 2.0 camera monitoring software. To install IPView Pro 2.0 on a system runni ng Windows, launch the IPView Pro 2.0 installation software on the installation CD-ROM and follow the setup instructions.
TV -IP600/W Wireless Netw ork Camer a 69 Add a camera for monitoring The Add camera menu is presented the first time the IPView Pro 2.0 software is launched. This menu is used to add cameras to the user interface for monitoring. After the first time running the software, this menu can be accessed at anytime from the Configuration menus.
TV -IP600/W Wireless Netw ork Camer a 70 If the camera does not appea r listed , click the Input the loca tion of camera tab ab ove the l ist to view a new menu.
TV -IP600/W Wireless Netw ork Camer a 71 IPView Pro 2.0 User Interface Below is a general description of the user i nterface. NO. Item Description 1 Live video display area Display area for singl e or mult iple cameras o f live vide o.
TV -IP600/W Wireless Netw ork Camer a 72 Display Controls The primary display and IPView Pro 2.0 control icons are described in detail below. When there are more than one camera displays viewed, one of the displays can be selected for management or additional changes.
TV -IP600/W Wireless Netw ork Camer a 73 Live video display controls Use the video display controls to change the view of the live video display. This is useful for multiple camera application. Click the arrows to manually cycle through th e active camera’s live display s when using a single c amera display screen.
TV -IP600/W Wireless Netw ork Camer a 74 Camera configuration with IPView Pro 2.0 Access the camera configuration menus by clicking on the gear icon at the bottom of the right hand panel of the IPView Pro 2.
TV -IP600/W Wireless Netw ork Camer a 75 2. Select the camera to ad d from the list, enter the administrator ’s user name ( ID: ) and password, a preview of the live video display will appear . Click the OK, a dd this came ra button, a confirmation message informs when the camera is con nec ted and added to the IPVi ew Pro 2.
TV -IP600/W Wireless Netw ork Camer a 76 Schedule R ecording wi th IPView Pro 2.0 Use the Camera Settings menu to create schedules for recording and apply the schedules to any camera. Click the Camera Se ttings tab to view the Schedule Recording menu (the first menu viewed in the Camera Settings menu tab).
TV -IP600/W Wireless Netw ork Camer a 77 Setup Motion Detection and Digita l Input with IPView Pro 2.0 The Camera Settings menus include Motion Det ection setup and Digital Input control. Each menu has the schedule option to apply a schedule for the action taken or always take the specified action.
TV -IP600/W Wireless Netw ork Camer a 78 IPView Pro 2.0 Recording Options The Recording Options configured in the IPView Pro 2.0 help to conserv e and manage allowed memory storage (disk space) and for video file management. Recorded files can be limited by time elapsed or by size.
TV -IP600/W Wireless Netw ork Camer a 79 IPView Pro 2.0 Miscellaneous Options The Other Options available for configuration incl ude Proxy server setup, email notification, scan interval and alert typ e se ttings.
TV -IP600/W Wireless Netw ork Camer a 80 8 Playing Video File s on a Computer IPCamPlayer software is installed on the monito ring station or administrator’s system along with the IPView Pro 2.0 monitoring software. Use it to playback and manage recorded video from the cameras added to the IPView Pro 2.
TV -IP600/W Wireless Netw ork Camer a 81 Load Saved Video Files Each camera has a file created automatically for storing video files. These files are normally located in the My Documents folder in Windows. The file folders are named according to the IP address and camera model.
TV -IP600/W Wireless Netw ork Camer a 82 To view recorded video files in the IPCamPlayer, it is first necessary to locate and select the files to be viewed and add them to the list. Click the Search Files button i n the IPCamPlayer main interface and a new menu appears.
TV -IP600/W Wireless Netw ork Camer a 83 ffdshow The ffdshow software is used for audio and video encoding and decoding, especially for MPEG-4 formats. It is free software used on Windows sy stems and enables the user to tweak media playback and select specific codecs and formats.
TV -IP600/W Wireless Netw ork Camer a 84 3. The InstallShield Wizard will appear, click Next in the welcome screen. 4. Accept the default location (Windows Progr ams folder) on the system for placement or Browse to choose an alternative, Click Next to continue.
TV -IP600/W Wireless Netw ork Camer a 85 5. Click to check the components that will be installed. For IPC amPlayer it is only necessary to use the default components already selected. Click Next to continue. 6. Accept the default destination folder (ffdshow) or Brow se to choose an alternative, Click Next to continue.
TV -IP600/W Wireless Netw ork Camer a 86 7. Click to check the additional tasks that will be installed. For IPCamPlayer it is only necessary to use the default formats al ready selected. Click Next to continue. 8. Click to check the video applications that use ffdshow.
TV -IP600/W Wireless Netw ork Camer a 87 9. Click to check the audio applications that use ffdshow. For IPCamPlayer it is on ly necessary to use the default applications al read y selected. Click Next to continue. 10. Choose a speaker setup or choose Disable mixer if unsure.
TV -IP600/W Wireless Netw ork Camer a 88 11. Review the information and click Install if satisfied that it is correct to install the necessary codecs. The installation will take a few seconds. 12. If desired, any of the three configuration ut ilities included with the ffdshow installation can be launched by checking the appropriate box.
TV -IP600/W Wireless Netw ork Camer a 89 9 Appendix A. Frequently Asked Questions Internet Camera Features Q: What is an Internet Camera? A: An Internet Camera is a stand-alone system connecting directly to an Ethernet or Fast Ethernet network and supported by the wirel ess transmission based on the IEEE 802.
TV -IP600/W Wireless Netw ork Camer a 90 Internet Camera Installation Q: Can the Internet Camera be used outdoors? A: The Camera is not water-proof and it is not recomended to use it outdoors. But you can use our Outdoor Internet Camera Enclosure TV -H500 or the one with Heater and Fan model TV-H510 to install the camera outdoor.
TV -IP600/W Wireless Netw ork Camer a 91 B. PING your IP Address The PING (Packet Internet Groper) command can determine whether a specific IP address is accesible by sending a packet to the specific address and waiting for a reply. It can also be a useful tool in confirming whether an IP address conflicts with the Camera’s on the network.
TV -IP600/W Wireless Netw ork Camer a 92 4. Type ping x.x.x.x , where x.x.x.x is the IP address of the Camera, as shown below: Reply messages indicate that there is another device on the nework, as indicated in the above window.
TV -IP600/W Wireless Netw ork Camer a 93 C. Troubleshooting Q: I cannot access the Camera from a web browser? A1: The possible cause might by that the IP addr ess of the Camera is already being used by another device. To c orrect the possible pr oblem, you need to disconnect the Camera from the network first.
TV -IP600/W Wireless Netw ork Camer a 94 A2.2: Click the Network Connections icon as shown below:.
TV -IP600/W Wireless Netw ork Camer a 95 A2.3: Double-click the network adaptor that is connected to your Camera: Select TCP/IP from the “Network“ dial og box and from the TCP/IP Prop er ties:.
TV -IP600/W Wireless Netw ork Camer a 96 Click the Properities button. Double-click the Internet Protocol (TCP/IP) item and check that the first 3 bytes of your computer’s IP address correspond with the first 3 bytes of the Camera’s.
TV -IP600/W Wireless Netw ork Camer a 97 Q: Why does the Camera work locally but not externally? A1: The Camera’s connection might be being blocked by a Firewall. Please check with your System Administrator to see if your Firewall allows access to the Canera.
TV -IP600/W Wireless Netw ork Camer a 98 D. Time Zone Table Time Zo ne Location/Description (GMT - 12:00) Enj wetok , Kwa j alei n (GMT - 11:00) Midway Island, Samoa (GMT - 10:00) Hawaii (GMT - 09:00).
TV -IP600/W Wireless Netw ork Camer a 99 Time Zo ne Location/Description (GMT + 01:00) Brussels, Copenhagen, Madrid, Paris, Vilnius (GMT + 01:00) Sarajevo, Skop je, Sofija, Warsaw , Zagreb (GMT + 02:0.
TV -IP600/W Wireless Netw ork Camer a 100 Time Zo ne Location/Description (GMT + 09:00) Seou l (GMT + 09:00) Yakut sk (GMT + 09:30) Adelaide (GMT + 09:30) Darwin (GMT + 10:00) Brisb ane (GMT + 10:00) .
TV -IP600/W Wireless Netw ork Camer a 101 E. Adjusting Internet C amera Focus To adjust the focus of the lens, you need to turn the lens slowly in either a clockwise or anti- clockwise direction until the desired image appears . Be sure t o not over turn the lens in either direction as this will cause the Camera to be out of focus.
TV -IP600/W Wireless Netw ork Camer a 102 G. Technical Specifications Camera General Sensor: 1/4” color CMOS SOC image senso r Resolution: 640 x 480 pixels Board Lens Focal Length: 4.
TV -IP600/W Wireless Netw ork Camer a 103 Netscape, and Google Chrome To Run Software Windows XP, Vista IPView Pro 2.
TV -IP600/W Wireless Netw ork Camer a 104 Security 64/128 ‐ bit WEP, WPA ‐ PS K, WPA2 ‐ PSK Output Po wer 802.11b: 16dBm (typical) 802.11g: 12dBm (typical) Receiving Sensitivity 802.
TV -IP600/W Wireless Netw ork Camer a 105 Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase.
TV -IP600/W Wireless Netw ork Camer a 106 MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGH TNING, OR OT HER HAZARD.
TV -IP600/W Wireless Netw ork Camer a 107.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté TRENDnet TVIP600 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du TRENDnet TVIP600 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation TRENDnet TVIP600, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le TRENDnet TVIP600 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le TRENDnet TVIP600, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du TRENDnet TVIP600.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le TRENDnet TVIP600. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei TRENDnet TVIP600 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
