Manuel d'utilisation / d'entretien du produit MDX2200 du fabricant Behringer
Aller à la page of 30
COMPOSER ® PRO MDX2200 www.behringer.com ENGLISH User’s Manual Version 1.3 June 2001.
2 COMPOSER PRO MDX2200 This symbol, wherever it appears, alerts you to important operating and mainte- nance instructions in the accompanying literature. Read the manual. SAFETY INSTRUCTIONS CAUTION: T o reduce the risk of electric shock, do not remove the cover (or back).
3 COMPOSER PRO MDX2200 FOREWORD Dear Customer, Welcome to the team of COMPOSER PRO users and thank you very much for expressing your confidence in BEHRINGER products by purchasing this unit.
4 COMPOSER PRO MDX2200 MDX2200 MDX2200 MDX2200 MDX2200 MDX2200 COMPOSER ® PRO Interactive 2-channel expander/gate/compressor/limiter of the reference class V IKA (Interactive Knee Adaptation) compres.
5 COMPOSER PRO MDX2200 T ABLE OF CONTENTS 1 . INTRODUCTION ..................................................................................................................... 7 1. 1 Before you begin ..................................................
6 COMPOSER PRO MDX2200 6. EXTERNAL SIDE CHAIN APPLICA TIONS ........................................................................... 24 6. 1 The side chain function ...................................................................................
7 COMPOSER PRO MDX2200 1. INTRODUCTION In purchasing the new COMPOSER PRO MDX 2200, you have acquired an extremely efficient and universal dynamics processor, which combines the most commonly used dynamic functions within a compact stereo unit: every channel has its own independent compressor/limiter, an expander/gate and a peak limiter.
8 COMPOSER PRO MDX2200 1.1 Before you begin The BEHRINGER COMPOSER PRO MDX2200 was carefully packed in the factory, in order to ensure safe transport. Nevertheless, should the box show signs of damage please check the equipment itself immediately for any signs of external damage.
9 COMPOSER PRO MDX2200 1.2.4 Transformer balanced outputs (optional) In contrast to electronic balancing, the use of transformer-balanced outputs offers the advantage of galvanic separation between units. Electrical potential differences and ground loops in audio installations do not there- fore impair the performance of the units.
10 COMPOSER PRO MDX2200 3 The RATIO control is used to adjust the expansion ratio when the signal drops below the threshold value. This control determines whether the unit works as an expander (low ratio level) or as a gate (1:8). The expansion ratio can be set from 1:1 to 1:8.
11 COMPOSER PRO MDX2200 13 Using the SC MON switch will enable you to connect the side chain control signal to the audio output, whilst at the same time muting the audio input. This function provides you with the ability to monitor the side chain signal that is returned via inserted equalizers or other external processors.
12 COMPOSER PRO MDX2200 2.4 Rear panel control elements of the COMPOSER PRO Fig. 2.5: Control elements of the rear panel 21 SERIAL NUMBER . Please take the time to complete and return the warranty card within 14 days of the date of purchase, otherwise you will lose the right to the extended warranty.
13 COMPOSER PRO MDX2200 also cause uncontrolled currents and voltages. The resulting sound of the various frequencies is heard as noise. Even the best possible tape biasing can “only” provide signal-to-noise ratios of about 70 dB, which is not acceptable today since the demands of listeners have increased.
14 COMPOSER PRO MDX2200 t P/dB +20 0 -20 -40 -60 -80 Clipping Headroom Operating level Effective SNR Noise floor Fig. 3.2: The interactive relationship between the operating level and the headroom The.
15 COMPOSER PRO MDX2200 inaudible as soon as considerably louder sound signals in the same frequency band are added. Nevertheless, the further the level that the desired signal decreases, the more the noise floor becomes a disturbing factor.
16 COMPOSER PRO MDX2200 average level without affecting signal peaks above the threshold, this is referred to as the program limiter. For this purpose the attack time will be set above 20 ms. If the attack time is further reduced in order to also control signal peaks, this is defined as the peak limiter.
17 COMPOSER PRO MDX2200 4.2.1 Controlling leakage in the studio Expander/gates are most commonly used to suppress undesirable leakage of sound from one track to another during recording or playback. They are usually used when recording drum kits, where the mics are very close to each other.
18 COMPOSER PRO MDX2200 4.2.3 Reducing leakage in stage mics The COMPOSER PRO has many uses in live-work, on stage and in multi-miking situations: a well set up expander/gate can effectively suppress background noise, compressor type pumping noise and microphone leakage etc.
19 COMPOSER PRO MDX2200 Threshold Gain 0 dB Input Output o o:1 Limiter Ratio 2:1 Ratio 4:1 Hard Knee green yellow red IKA Curve LED Fig. 4.2: IKA characteristic of the compressor section The new IKA (Interactive Knee Adaptation) circuit prevents aggressive compression, created by high ratios, from sounding too unnatural.
20 COMPOSER PRO MDX2200 technique is required, the attack and release times can also be manually adjusted. The experienced user will be in a position to specify parameters while in bypass mode and thus realize the effect before the unit is actually switched into operation.
21 COMPOSER PRO MDX2200 Output Input Peak Limiting Program Limiting Release Threshold t/ms Level 20 ms 10 20 30 5 ms approx. 1 s Fig. 4.3: IGC characteristic of the limiter section The diagram illustrates the functioning of the IGC limiter. The solid graph represents the output signal, while the dashed graph above shows the input signal response.
22 COMPOSER PRO MDX2200 5.1.1 The COMPOSER PRO in digital recording and sampling In an analogue recording, too low recording levels lead to an increased noise level, whereas too high levels will cause a compressed and “squashed” sound. In extreme cases, it will cause distortion due to tape saturation.
23 COMPOSER PRO MDX2200 5.2.1 Protection of a system with a passive crossover If your sound system incorporates a passive crossover network (included in the loudspeaker case), insert the BEHRINGER COMPOSER PRO between your mixing console output and the power amplifier input.
24 COMPOSER PRO MDX2200 6 . EXTERNAL SIDE CHAIN APPLICATIONS 6.1 The side chain function The BEHRINGER COMPOSER PRO offers an exceptionally usable external facility by using the side chain function. By activating the SC EXT switch, the COMPOSER PRO’s control path is disconnected from the audio input and therefore interrupted.
25 COMPOSER PRO MDX2200 l o r t n o C g n i t t e S h c t i w s T X E C SN I h c t i w s N O M C ST U O h c t i w s E V I T C A R E T N IF F O h c t i w s R E T L I F C ST U O l o r t n o c D L O H S .
26 COMPOSER PRO MDX2200 6.4 “Voice-over” compression (“ducking”) The COMPOSER PRO can be used to automatically reduce music to a background level, when an announcer is speaking through a microphone.
27 COMPOSER PRO MDX2200 Unbalanced use of mono 1/4" jack plugs Ring Balanced use of stereo 1/4" jack plugs Balanced use with XLR connectors 1 2 3 2 1 3 Input Output Tip = Signal Tip = hot (+.
28 COMPOSER PRO MDX2200 8. SPECIFICATIONS 8. SPECIFICATIONS AUDIO INPUT Connectors XLR and 1/4" jack T y pe RF filtered, servo-balanced input Impedance 50 kOhm balanced, 25 kOhm unbalanced Nominal operating level +4 dBu/-10 dBV switchable Max. input level +21 dBu balanced and unbalanced CMRR typ.
29 COMPOSER PRO MDX2200 8. SPECIFICATIONS PEAK LIMITER SECTION T y p e IGC (Interactive Gain Control) peak limiter Threshold variable (+4 dB to OFF (+22 dBu)) Ratio o o:1 S tage 1 Limiter T ype Clipper Attack “zero” Release “zero” S tage 2 Limiter T ype Program limiter Attack program dependent, typ.
30 COMPOSER PRO MDX2200 9. WARRANTY The information contained in this manual is subject to change without notice. No part of this manual may be reproduced or transmitted in any form or by any means, e.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Behringer MDX2200 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Behringer MDX2200 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Behringer MDX2200, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Behringer MDX2200 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Behringer MDX2200, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Behringer MDX2200.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Behringer MDX2200. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Behringer MDX2200 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
