Manuel d'utilisation / d'entretien du produit High-Power Wireless USB Adapter TL-WN422G du fabricant TP-Link
Aller à la page of 43
TL-WN422G High-Power Wireless USB Adapter Rev:1.0.0 1910010090.
COPYRIGHT & TRADEMARKS Specifications are subjec t to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders.
FCC STATEMENT This equipment has been tested and found to comp ly with th e limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limit s are designed to pro-vide reasonable protection against har mful interference in a residential installation.
National Restrictions 2400.0-2483.5 MHz Country Restriction Reason/remark Bulgaria None General authorization required for outdoor use and public service France Outdoor use limited to 10 mW e.i.r.p. w ithin the band 2454-2483.5 MHz Military Radiolocatio n use.
CONTENTS Package Co nten ts ........................................................................................................... 1 Chapter 1 Introduction ..........................................................................................
- - 1 Package Contents The following items should be found in your package: ¾ One TL-WN422G High-Power Wireless USB Adapter ¾ One USB extension cable ¾ One TL-WN422G High-Power Wireless USB Adapter.
TL-WN422G High-Power Wireless USB Adapter User Guide - - 2 Chapter 1 Introduction Thank you for choosing the TL-WN422G High-Power Wireless USB Adapter ! 1.1 Overview of the Product The adapter is a USB 2.0 pen-size wireless adapter suppo rting IEEE 802.
TL-WN422G High-Power Wireless USB Adapter User Guide - - 3 1.4 System Requirement s The following are the minimum system requirements in order to use the TL-WN422G High-Power Wireless USB Adapter. ¾ PC/AT compatible computer with a USB interface. ¾ Windows 98/ME/2000/XP/2003/ Vista operating system.
TL-WN422G High-Power Wireless USB Adapter User Guide - - 4 The image below depicts a network in infrastructure mode. Figure 1-2 Infrastructure mode..
TL-WN422G High-Power Wireless USB Adapter User Guide - - 5 Chapter 2 Installation Guide 2.1 Before Y ou Be gin During the installation, Windows 98/ME/2000/ XP/2003/Vista may need to copy systems files from its installation CD. Therefore, y ou may need a copy of the Windows installation CD at hand before installing the drivers.
TL-WN422G High-Power Wireless USB Adapter User Guide - - 6 Figure 2-2 Install Shield—C hoose Destination Location 4. Wait a few minutes until the files are copied to the computer. Figure 2-3 Install Shield—Setup S tatus 5. Click on the Finish button to complete the installation.
TL-WN422G High-Power Wireless USB Adapter User Guide - - 7 Figure 2-4 Installation Complete Now, carefully insert the device into t he USB port of your computer. Windows will automatically detect the de vice and display the icon and below in the taskbar.
TL-WN422G High-Power Wireless USB Adapter User Guide - - 8 2. Select Device Manager as shown in Figure 2-6, then select Continue in the next screen. Figure 2-6 Select Device management 3. Right-click the adapter icon “ USB2.0 VLAN ” and select “ Update Driver Software ” to proceed.
TL-WN422G High-Power Wireless USB Adapter User Guide - - 9 Figure 2-7 Driver management 4. Select the method to update the driver software (see Figure 2-8). If you want the system to search the software automatically , select the first type. Otherwise select “ Browse my computer for driver software ” to install the software (best way).
TL-WN422G High-Power Wireless USB Adapter User Guide - - 10 Figure 2-8 Select the method to install 5. Click the Browse button in the next screen to select t he file which cont ains the driver software for the adapter. After that, click Next to proceed.
TL-WN422G High-Power Wireless USB Adapter User Guide - - 11 6. After that, the installation w ill proceed as shown in Figure2-10. Figure 2-10 Installing ) Note: During the installation, you will see the warni ng box as shown in figur e 2-1 1, please select “Install this driver sof t ware anyway” to proceed.
TL-WN422G High-Power Wireless USB Adapter User Guide - - 12 Figure 2-12 Complete the installation.
TL-WN422G High-Power Wireless USB Adapter User Guide - - 13 Chapter 3 Uninstall Guide If the device installation is fails by some mist ake, the best way to solve the problem is to completely uninstall the device and utility, and then rerun the “ Setup.
TL-WN422G High-Power Wireless USB Adapter User Guide - - 14 Figure 3-2 Confirm Uninstall 4. The process will then remove TL-WN422G Wireless Utility and the drivers from your computer. Choose the first option, then click on the OK button to comp lete the uninstall and restart your computer.
TL-WN422G High-Power Wireless USB Adapter User Guide - - 15 Figure 3-4 Uninstall from programs ¾ Then, process will go to Install Shield Wizard . The screen will pop up the following conversation “Do you want to completely remove the selected application and all of its features” , Click on the OK button to confirm the Uninstalling process.
TL-WN422G High-Power Wireless USB Adapter User Guide - - 16 Figure 3-6 Uninstalling process finished 3.3 Uninst all the driver software from y our PC 1. On the Windows taskbar, click the Start button, point to Settings , and then click Control Panel .
TL-WN422G High-Power Wireless USB Adapter User Guide - - 17 Chapter 4 Software Configuration 4.1 St ation Mode Configuration This chapter focuses on how to configure the device in Station mode (wireless LAN client). 4.1.1 Current Network Information The Current Netw ork Information screen displays the current status of the network in station mode.
TL-WN422G High-Power Wireless USB Adapter User Guide - - 18 Figure 4-2 More setting ¾ SSID: Enter the SSID of the network. The SS ID is a unique name shared among all points in your wireless network. The SSID must be identical for all points in the network, and is case-sensitive.
TL-WN422G High-Power Wireless USB Adapter User Guide - - 19 Figure 4-3 More setting—WEP 4.1.2.2 WEP Encryption You can select 64, 128 or 256 bit WEP (Wired Equivalent Privacy) key to encrypt data (Default setting is Disable). ¾ Authentication: Select Open System or Shared Key from the drop-down list.
TL-WN422G High-Power Wireless USB Adapter User Guide - - 20 Figure 4-4 WEP Key Setting ¾ Key Length: Select an encryption key length: 64 , 128 or 256 bit .
TL-WN422G High-Power Wireless USB Adapter User Guide - - 21 ¾ Click on the Apply button, and then you can use th e IEEE 802.1X authentication. 4.1.2.3 WPA/WPA2 Authentication with TKIP/AES Encryption WPA (Wi-Fi Protected Access) was designed to improve upon the security features of WEP (Wired Equivalent Privacy).
TL-WN422G High-Power Wireless USB Adapter User Guide - - 22 authentication server. Figure 4-7 WP A setting ¾ Protocol: Select TLS from the drop-down list. ¾ User Name: Enter the user name that is used for authentication purposes. ¾ Passphrase: Enter a WPA passphrase.
TL-WN422G High-Power Wireless USB Adapter User Guide - - 23 Figure 4-8 WP A-PSK Authentication ¾ Authentication: Select WPA-PSK from the drop-down list. ¾ Encryption: Select an encryption type from the drop-down list. ¾ Click on the Apply button to save the changes.
TL-WN422G High-Power Wireless USB Adapter User Guide - - 24 Figure 4-9 More Setting—Profile ¾ Profile Name: Displays the name of current pr ofile. One device can have many profiles, but only one profile can be loaded at a time. ¾ Load: Select a profile from the drop-down list and then click on the Load button.
TL-WN422G High-Power Wireless USB Adapter User Guide - - 25 Figure 4-10 Advanced Setting ¾ Power Consumption Setting: If your desktop or notebook is connected to external power, select Continuous Access Mode (CAM) , if your notebook is using a battery, select Maximum Power-Saving Mode , or Fast Power-Saving Mode .
TL-WN422G High-Power Wireless USB Adapter User Guide - - 26 The more setting screen: Figure 4-12 Access point setting.
TL-WN422G High-Power Wireless USB Adapter User Guide - - 27 Chapter 5 Examples for Application 5.1 Example one: Configuration of WEP Encryption Suppose you have an installed and using AP, the SSID is TEST and it adopts 64 bit WEP encryption with the key “1111111111”.
TL-WN422G High-Power Wireless USB Adapter User Guide - - 28 Figure 5-2 Step Three ： ¾ Key length ： 64 bit ¾ Default key ID ： #1 ¾ Key format ： Hexadecimal ¾ Key value ： enter “1111111111” in #1 Step Four ： Click the close button in top right of the screen, and it will return to the screen of wireless utility.
TL-WN422G High-Power Wireless USB Adapter User Guide - - 29 5.2 Configuration of PSP Mode Please ensure the software and hardware environments are established well before configuring. For hardware, at least a PC, a TL-WN422G USB Wireless Adapter and a PSP device are needed.
TL-WN422G High-Power Wireless USB Adapter User Guide - - 30 Figure 5-5 Remark: You can change the defau lt network SSID and channel by yourself. If you didn’t startup WEP Encryption, any PSP could link in, and t he wireless network won’t be protected by encryption key.
TL-WN422G High-Power Wireless USB Adapter User Guide - - 31 Step Three ： Establish a new connection, and enter the name of this connection. (Any is ok), we use TEST for example. Step Four ： Select SCAN, and let PSP scan the nearer AP automatic ， then choose the default network SSID WLAN_AP of TL-WN422G High-Power Wireless USB Adapter.
TL-WN422G High-Power Wireless USB Adapter User Guide - - 32 Step Eight ： In “Address Setting” screen, please set IP address. Step Nine ： “Proxy Server” selects “Do Not Use”. Step Ten ： Select “Test Connection”. Step Eleven ： Test network connection.
TL-WN422G High-Power Wireless USB Adapter User Guide - - 33 Chapter 6 Configuration for Windows Vista After the Adapter's driver has been inst alled, Windows Vista will display a wireless Network Connection message like this one. Figure 6-1 Icon means the connection has been established.
TL-WN422G High-Power Wireless USB Adapter User Guide - - 34 Figure 6-3 3. To continue, click Connect Any way . Click the Cancel button to end the connection. Figure 6-4 4. If the connection is successful estab lished, the following screen will appear.
TL-WN422G High-Power Wireless USB Adapter User Guide - - 35 Figure 6-5.
TL-WN422G High-Power Wireless USB Adapter User Guide - - 36 Appendix A: Glossary IEEE 802.11b - The IEEE 802.11b standard specifies a wireless networking at 11 Mbps using direct-sequence spread- spectrum (DSSS) technology and operating in the unlicensed radio spectrum at 2.
TL-WN422G High-Power Wireless USB Adapter User Guide - - 37 WPA ( W i-Fi P rotected A ccess) - A wireless security protocol use TKIP (Temporal Key Integrity Protocol) encryption, which can be used in conjunct ion with a RADIUS server.
TL-WN422G High-Power Wireless USB Adapter User Guide - - 38 Appendix B: Specifications General Interface A-type USB 2.0 Connector Standards IEEE 802.1b; IEEE 802.1g Operating System Windows 98, ME, 2000, XP, 2003, Vista Transmission Distance In door up to 100m, out door up to 300m (It is limited to the environment).
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté TP-Link High-Power Wireless USB Adapter TL-WN422G c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du TP-Link High-Power Wireless USB Adapter TL-WN422G - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation TP-Link High-Power Wireless USB Adapter TL-WN422G, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le TP-Link High-Power Wireless USB Adapter TL-WN422G va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le TP-Link High-Power Wireless USB Adapter TL-WN422G, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du TP-Link High-Power Wireless USB Adapter TL-WN422G.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le TP-Link High-Power Wireless USB Adapter TL-WN422G. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei TP-Link High-Power Wireless USB Adapter TL-WN422G ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
