Manuel d'utilisation / d'entretien du produit WX800U du fabricant Toshiba
Aller à la page of 106
46WX800U 55WX800U Integrated High Definition LCD Television © 2010 TOSHIBA CORPORATION All Rights Reserved Owner’s Record The model number and serial number are on the back and side of your TV. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV.
2 Dear Customer, Thank you for pur c hasing this Toshiba LCD TV. This manual will help you use the many exciting fe atures of your new LCD TV. Before operatin g your LCD TV, please rea d this manual comple tely , and keep it nearby for future referen ce.
3 Important Safety Instructions 1) Rea d these instructions. 2) Keep these instruct ions. 3) Hee d all warnin g s. 4) Follow all ins tructions. 5) Do not use this ap paratus near water. 6) Clean only with d ry cloth. 7) Do not block any ve ntilation openin g s.
4 25) Always place the TV on the fl oor or a sturdy, level, stable surface that can suppor t the weight of the unit. In order to maintain stability and prevent the TV falling over, secure the TV with a sturdy strap from the hooks on the rear of the TV pedestal to a wall stud, pillar, or other immovable structure.
5 41) During normal use, the TV may make occasional snapping or popp ing sounds. This is normal, especially when the unit is be ing turned on or o ff. If these sounds become frequent or continuo us, unplug the power cord and contact a Toshiba Authorized Service Center.
6 Safety Precautions for 3D glasses Note: See p. 32 for compatible type of 3D glasses. 3D glasses not included. Warning About han d lin g the 3D g lasses • Do not leave the 3D g lasses, the battery, o r the accessories wi thin the reach of small chil d ren.
7 USA - Federal Communications Commission Statement FCC Compliance Statement This Toshiba television mo d els 46WX800U an d 55WX800U comply with Part 15 of the FCC Rules.
8 ENERGY STAR ® User Information ENERGY STAR User Informat ion Statement: the factory default settings of this television meet ENERGY STAR ® requirements.
9 • THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON- COMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) A.
10 Contents Impo r tant Safety Inst r uctions . . . . . . . . . . . . . . . . . . . . . . 3 Installation, Ca r e, and Se r vice . . . . . . . . . . . . . . . . . . . . . 3 Choosing a location fo r you r LCD TV . . . . . . . . . . . . . . . . . 5 Safety P r ecautions fo r 3D glas ses .
11 Color temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Resetting to the factory default . . . . . . . . . . . . . . . . . . 56 Expert Picture Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Test Pattern . .
12 Chapter 1: Introduction Features • Integrated digital tuning (8VSB ATSC and QAM) eliminates the need for a separate digital converter set-top box (in mo st cases). • 1080p output resolution. • Four HDMI ® digital, High-Definition Multi media Interfaces with 1080p input support ( - p.
13 Chapter 1: Introduction Front panel controls Examples show Model 46WX80 0U. Back panel connections For an explanation of cable ty pes and connections, see p. 15–23. TV f r ont S mart S ensor This sensor will detect the ambient light and color conditi ons ( - p.
14 Chapter 1: Introduction Bundling the cables Install the cable clamps, and put the cables in these. Stand type Wall Mount type Cable Clamps Cable Clamps WX800U_EN.
15 Chapter 2: Connecting your TV Overview of cable types Before purchasing cables, know the connector types your devices require. You can purchase cables from most stores that sell audio/video devices. Coaxial cable (F-type) (F-type) Connects your antenna, cable TV servic e, or cable converter box on your TV.
16 Chapter 2: Connecting your TV Connecting to Satellite dish, Antenna, or Cable TV IN OUT CH 3 CH 4 VIDEO OUT AUDIO OUT COMPONENT VIDEO L R S atellite IN P B P R Y TV back panel VHF/UHF Antenna Cable.
17 Chapter 2: Connecting your TV Connecting an HDMI ® or DVI device to the HDMI input HDMI OUT DVI /HDCP OUT AUDIO R L OUT TV back panel HDMI device DVI device HDMI cable Audio cable HDMI-to-DV I ada.
18 Chapter 2: Connecting your TV Connecting a VCR or DVD player with ColorStream ® (component video) VIDEO AUDIO LR COMPONENT VIDEO P B P R Y AUDIO OUT LR R W Y G B R R W W Y Y R W R W R GB R G B TV .
19 Chapter 2: Connecting your TV Connecting remote IR devices Using the IR OUT terminal You can use the TV’s IR OUT terminal to remotely operate many infrared remote-controlled devices enclosed in an entertainment center or similar cabinet. You will need: • Dual-wand IR b laster cabl e ( - p.
20 Chapter 2: Connecting your TV Using the IR IN terminal For additional control opti ons for your home theater system, you can connect an IR receiver/repeater control system (not in cluded) to the TV’s I R IN termin al. You will need: •I R c a b l e To set the IR IN mode: 1 Y > PREFERENCE S > IR Control .
21 Chapter 2: Connecting your TV Using the TV remote and REGZA-LINK ® to control other devices To control th e basic functi ons of connec ted audio/vid eo devices u sing the TV’s remo te control, co nnect a REGZA- LINK ® compatible audio receiver o r playback device.
22 Chapter 2: Connecting your TV Connecting a PC You can watch your PC’s display on the TV and hear the sound from the TV’s speakers. Connecting to the TV’s PC IN terminal You will need: • Analog RGB (15-pin) computer cable •P C a u d i o c a b l e Before using the PC: See “Using yo ur PC with t he TV” ( - p.
23 Chapter 2: Connecting your TV Connecting to a home network The LAN port all ows your Toshib a TV to conn ect to your home network. You can use this home network to access pho to, movie and music files that are st ored on a DLNA CERTIFIED ™ Server and pla y them on your TV.
24 Chapter 3: Using the remote control Controlling other devices The TV’s remote control can operate other devices such as cable converter boxes, satellite receivers, VCRs, DVD players, and HTIBs (home theater in a box). Toshiba device: The remote is programmed to operate these devices ( - p.
25 Chapter 3: Using the remote control The remote’s buttons The buttons described in this section operate th e TV only. For the REGZA-LINK function s, see “Using REGZA-LINK ® ” ( - p. 43). For a complete list of the remote’s functions, see “Remote control fu nctional key chart” ( - p.
26 Chapter 4: Initial Setup and Menu Initial Setup When you first tu rn on or reset the TV, th e Initial Setup window will appear. Note: • You can stop the Initial S etup by pressing O . However, if you do not finish the Initial Setup, the In itial Setup screen will appear every time you turn on your TV.
27 Chapter 4: Initial Setup and M enu 7 S tart S can Note: If you want to stop scanning, press O while scanning. • After scanning co mpletes, a channel list screen (such as the one below) appears. If channels are not found after scanning: • Check the antenna/cable co nnections, and scan again.
28 Chapter 4: Initial Setup and M enu Main menu layout To open the main menus ( illustrated below), pres s Y on the remote control or TV control panel. Quick menu Quick menu helps you access some options quickly. Press to display the Quick menu and press B or b to select the option.
29 Chapter 5: Setting up your TV How to navigate the menu: Y > Main menu > Submenu > Changing Initial settings From Quick Setup: 1 Y > S ETUP > Quick S etup > . 2 A confirmation message appears. Press C or c to select Yes . Press . 3 To change settings, see “Initial Setup” ( - p.
30 Chapter 5: Setting up your TV Note: To tune to channels not stored in memory, use buttons 0–9 and = on the remote control. 1 Y > S ETUP > Auto Tunin g > . A confirmation screen appears. 2 Press to start Auto Tuning or O to abort. The TV cycles th rough all the chan nels, and stores all active channels in memory.
31 Chapter 5: Setting up your TV Labeling video inputs The input labels are shown in the input selector, and in the Channel Bro wser and banner displays. You can label video inputs according t o the devices you have connected to the TV. 1 Y > PREFERENCE S > AV Connection > .
32 Chapter 6: Basic features Viewing 3D images Before using 3D func tion, see the follo wing. Viewing 3D programming requires the follow ing (which are not included): • Compatible Toshiba 3D glasses (FPT-AG01U*). • Compatible 3D p layback device or 3D source.
33 Chapter 6: Basic features Using 3D functions Incoming video signals can either be in 2D or 3D format. A 2D signal can only be viewed as 2D, but 3D can be viewed in either 2D or 3D. If the TV can detect the fact that a signal is 3D , it can change to 3D mode automatically – see “3D Auto Start”, below.
34 Chapter 6: Basic features To switch to 2D mode: •S e t 3D Auto S tart to 2D . • Press while viewing 3D mode. * Correct 2D im age To select 2D format from the Quick menu in 2D mode: 1 Press . Select 3D S ettin g s . 2 Press B or b to select 2D Format S elect .
35 Chapter 6: Basic features Forgotten PIN codes: 1 Y > PREFERENCE S > 3D S etup > . 2 Press B or b to select 3D PIN . 3 Press 4 times within 5 seconds. The code clears. 4 Enter a new PI N code. Setting 3D Start Message When this featu re is set to On, a message is displ ayed onscreen when a 3D signal is received.
36 Chapter 6: Basic features Tuning channels Setting the Channel Tuning Mode You can select how tuning is handled for analog and digital channels wh en the TV is in A ntenna mode. Note: To use this feature, ANT/CABLE In must be set to Antenna ( - p. 29).
37 Chapter 6: Basic features Elements of the Channel Brows er ™ 1 Current list ( History , ANT/CABLE , Inputs , or RE G ZA-LINK ) 2 Input type 3 Channel or input currently being viewed 4 Channel or .
38 Chapter 6: Basic features Selecting the video input to view To select the video input to view: 1 Press + on the remote control or TV control panel. 2 Change the inpu t: • Press 0–8. • Repeatedly press B or b . Press . • Repeatedly press + .
39 Chapter 6: Basic features Note: A closed caption signal may not display when a videotape is dubbed, signal reception is weak, or signal reception is non-standard. Digital CC settings You can customize the closed caption display characteristics. Note: • This settings is availabl e for digital channels only.
40 Chapter 6: Basic features Using parental controls Blocking TV programs and movies by rating (V-Chip) Some TV programs and movi es include signal s that classify the content of the program (violence, sex, dialogue, language). The V-Chip feature in this TV detects the signals and bloc ks the programs according to the ratings you select.
41 Chapter 6: Basic features Rating system Note: • If you place an “ 5 ” in the box next to “ Rated “None ” ”, programs rated “ None ” or “ Not Rate d ” will be blocked; Programs that do not provide any rating information will not be bl ocked.
42 Chapter 6: Basic features Locking specific channels A channel that is configured as Locked cannot be viewed unless the PIN code is entered first ( - “Setting the PIN code” on p. 39). 1 Y > S ETUP > TV S ettin g s > . 2 Press B or b to select Channel Options .
43 Chapter 6: Basic features Using REGZA-LINK ® This feature uses CEC technol ogy and allows you to control Toshiba REGZA-LINK ® compatible devices from the TV remote con trol via HDMI connection. When Enable RE G ZA-LINK in the RE G ZA-LINK S etup menu is set to On , the following R EGZA-LINK ® functions are enabled.
44 Chapter 6: Basic features Adjusting the amplifier’s audio Using the TV’s remote contro l, you can adjust or mute the sound volume of your amplifier. First, set the MODE SELECT switch on the remote control to TV . • z Z adjust the volume level.
45 Chapter 6: Basic features Using the HDMI ® settings feature Note: If some HDMI legacy sources do not work properly with your HDMI TV, set the following options (Content Type and INSTAPORT ™ ) to Off . Adjusting these settings should allow your HDMI legacy source to operate properly w ith your TV.
46 Chapter 6: Basic features Using your PC with the TV Adjusting the image If the edges of the pictur e are hidden, readjust the Horizontal Position and Vertical Position . If the picture is affected by interference, readjust the Clock Phase and S amplin g Clock .
47 Chapter 6: Basic features Setting the sleep timer You can set the TV to turn off after a specific amount of time (maximum = 12 hours). Using the remote control: 1 Press [ 2 Set the time un til the TV turns o ff. • Repeatedly press [ to increa se the time.
48 Chapter 6: Basic features Setting Blue Screen When Blue Screen is set to On, the screen will turn blue and the sound will be muted when n o signal is received . 1 Y > PREFERENCE S > Blue S creen . 2 Press C or c to select On . Press O . Note: Some external inputs may not mute the sound.
49 Chapter 6: Basic features Viewing support information 1 Y > S ETUP > S ystem Information . 2 Press to display support information containing Web/Customer service numbers for US, Canada and Mexico. Resetting to Factory Defaults You can reset al l settings and channe ls.
50 Chapter 7: Picture and sound controls Selecting the picture size You can view many program formats in several picture sizes— Native , 4:3 , Full , TheaterWi d e 1 , TheaterWi d e 2 , TheaterWi d e 3 , Normal , and Dot by Dot . Note: The picture size illustrati ons are examples only.
51 Chapter 7: Picture and sound controls * To view th e hidden ar eas (such as subtitles or captio ns), see “Scrolling the pictur e” ( - p. 52). Pictu r e Size Native (fo r 480i (HDMI), 480p (HDM .
52 Chapter 7: Picture and sound controls Scrolling the picture If the edges of the picture ar e hidden, yo u can adju st the image’s position. Note: You can adjust the picture position when the picture size is set to Theat erWide 2 or TheaterWide 3 .
53 Chapter 7: Picture and sound controls Adjusting the picture Selecting the picture mode You can select yo ur desired picture settings from th e following mod es, as described bel ow. Note: • PC mode is available for HDMI and PC inputs only (not displayed for other input sources).
54 Chapter 7: Picture and sound controls Using the advanced picture settings features Note: Some of the Advanced Picture Settings features will not be available for adjustment when the Picture Mode is set to AutoView .
55 Chapter 7: Picture and sound controls MPEG NR The MPEG noise reduction feature allows yo u to reduce visible interference caus ed by MPEG compression . 1 Y > PICTURE > A d vance d Picture S ettin g s > . 2 Press B or b to select Noise Re d uction .
56 Chapter 7: Picture and sound controls ColorMaster ™ The ColorMaster ™ feature allows you to adjust standard colors. 1 Y > PICTURE > A d vance d Picture S ettin g s > . 2 Press B or b to select ColorMaster , pre ss C or c to select On .
57 Chapter 7: Picture and sound controls Setting Type You can select a way of the white balance’s setting. 1 Y > PICTURE > Expert Picture S ettin g s > . 2 Press B or b to select White Balance . Press . 3 Press B or b to select S ettin g Type .
58 Chapter 7: Picture and sound controls Adjusting the audio Muting the sound Press t o partially reduce (1/2 Mute) or turn off (Mute) the sound. Each time you press , the mute mode changes in this or.
59 Chapter 7: Picture and sound controls Using the Dolby ® Digital Dynamic Range Control feature You can further compress Dolby Digital a nd Dolby Digital Plus dynamic range so yo u can switch from digital to analog broadcast s at the same dynamic range.
60 Chapter 8: Advanced features Using your home network • This TV is a DLNA CERTIFIED ™ Player and Renderer. This TV can play digital content stored on a DLNA CERTIFIED ™ product wi th server fu nction. If you want to use this TV as a DLNA CERTIFIED ™ Player or Renderer, you w ill have t o configure the network settings on your TV ( - p.
61 Chapter 8: Advanced features Setting up the Network You can select the Network Type. 1 Y > PREFERENCE S > Network S etup > . 2 Press B or b to highlight Network Type . 3 Press C or c to select Wire d or Wireless . 4 If you select Wire d , see “Advanced Network Setup” ( - p.
62 Chapter 8: Advanced features Manual Setup 1 Y > PREFERENCE S > Network S etup > . 2 Press B or b to select Wireless S etup . Press . 3 Press B or b to select Manual S etup . Press . 4 Press B or b to select Network Name . Press . The Software Keyboard window appears.
63 Chapter 8: Advanced features Wireless Information The settings configured in Wireless S etup can be confirmed. Note: When Network Type is Wireless , this menu is available from the Quick menu. 1 Press to open the Quick menu. 2 Press B or b to select Wireless Information .
64 Chapter 8: Advanced features Auto setup: 1 Y > PREFERENCE S > Network S etup > . 2 Press B or b to select A d vance d Network S etup . Press . 3 Press B or b to select DN S S etup . Press . 4 Select Auto S etup . Press C or c to select On .
65 Chapter 8: Advanced features Using the software keyboard You can enter text by using th e Software Keyboard. The Software Keyboard window w ill appear when you press on a field that accepts character input. Note: In the NET TV feature, software keyboard dep ends on each internet service.
66 Chapter 8: Advanced features Using the NET TV ™ feature Note: • You need to connect to the Internet before using this feature ( - p. 23). • Services that can be used vary from country to country. • The NET TV feature and 3D display are not available at the same time.
67 Chapter 8: Advanced features Enter the activation cod e displayed on the TV screen. 5 To add movies and TV ep isodes to y our Instant Queue, visit http://www.
68 Chapter 8: Advanced features • Though the same volume va lue, an actual volume migh t be greatly different depending on contents. • This TV might take time during start-up and the playback of contents. • Content that the user may feel is improper or offensive may be included in the contents of YouTube.
69 Chapter 8: Advanced features Setting the view feature 1 From the Function menu, press C or c to select Menu . Press . 2 Press C or c to select View . 3 Press B or b to select the desired item. Press . 4 Press B or b to select the desired setting. Press .
70 Chapter 8: Advanced features Yahoo! TV Widgets Yahoo! TV Widgets provide an integrated Internet and TV experience powered by the Yahoo! Connected TV platform. Yaho o! TV Widgets a llow you to: • Track your stocks and stay current w ith financial news.
71 Chapter 8: Advanced features Using the Widget Gallery •T h e Widget Gallery allows you to browse and discover new TV Widgets. • The featured TV Widgets are highlighted in the display case at the top of the sidebar. • You can also browse available TV Widgets by category.
72 Chapter 8: Advanced features Media Renderer 1 Y > PREFERENCE S > Me d ia Ren d erer S etup > . 2 Press B or b to highlight Me d ia Ren d erer . Press C or c to sele ct On or Off . Device Name Setup The device name as a DMR can be changed. The set device name can be confirmed from the DMC.
73 Chapter 8: Advanced features Using the Media Player This TV allows you to enjoy photos, movies or music files stored on a USB device or SD Memory Card. Moreover, you can also play photo s, movies or music files from your PC by connecting the TV to your home network.
74 Chapter 8: Advanced features Using Media Player with DL NA CERTIFIED ™ Server You need to configure a home net work before using this feature ( - p. 23). 1 Y > APPLICATION S > Me d ia Player > . 2 Press B or b to select Photo , Movie , or Music .
75 Chapter 8: Advanced features Viewing Movie files Basic Playback: 1 Select a file ( - “To select a file in the list of contents” on p. 73). Press or S to b egin playback. Note: • When you highlight the file without pressing , the content is played on a preview screen.
76 Chapter 8: Advanced features To display the file status information: 1 Press during playback. The information will be displayed on the bottom of the screen. 2 Press ag ain to hi de the info rmation. Note: The information may not be correctly displayed depending on contents, DMC or DMS.
77 Chapter 8: Advanced features To set the repeat mode: 1 Press . The current repeat setting appears. 2 Press C or c to select Off , All or 1 . 3 Press . The setting is effective un til the TV is turned off. Note: When the TV is used as a DMR, this feature is not available.
78 Chapter 8: Advanced features Viewing Photo files Multi View mode: This view mode allow s you to search for photo s in a grid format. These pictures are displayed using thumbnai l data in each image file. 1 Press B , b , C or c to move the high light in one window.
79 Chapter 8: Advanced features To rotate the imag e: While viewing the image in Single View mode o r Slideshow mode, pres s B to rotate the image 90 degrees clockwise, press b to rotate the image 90 degrees counterclockwise. Note: When the TV is used as a DMR, this feature is not available.
80 Chapter 8: Advanced features Auto Power Off 1 Y > PREFERENCE S > Photo Frame S etup > . The preview screen appears. 2 Press B or b to highlight Auto Power Off .
81 Chapter 9: Troubleshooting General troubleshooting Before calling a service technician, please check this chapter for a possible cause of the problem and some solutions you can try. Black box onscreen • The clo s ed captio n feat ur e i s s et to o n e of the Text mode s ( T1 , T2 , T3 , o r T4 ).
82 Chapter 9: Troubleshooting s pecific feat ur e o n a n othe r device, us e the r emote co n t r ol that came wi th the device ( - p. 94–99). • If the TV s till doe s n ot act a s expected, us e the Re s et Facto r y Defa u lt s p r oced ur e ( - p.
83 Chapter 9: Troubleshooting • The n etwo r k s et u p o n the Se r ve r i s i n co rr ect. Make sur e both the DMS a n d TV a r e us i n g the s ame n etwo r k type (DHCP/ma nu al) a n d have compatible n etwo r k s etti n g s . • Too ma n y DMS s a r e co nn ected.
84 Chapter 10: Appendix Specifications Note: • This model com plies with th e specificati ons listed below. • Designs and spe cifications are subject to change without notice. • This model may not be comp atible w ith feature s and/ or specification s that may be added in the fu ture.
85 Chapter 10: Appendix Acceptable signal formats for PC IN and HDMI terminals PC IN signal formats Note: • The PC IN on this TV only accepts signal formats which are co mpliant with VESA-DMT as in th e table below.
86 Chapter 10: Appendix HDMI signal formats Note: • The HDMI inputs on this TV only accept VGA, SVGA, XGA, W X GA, and SXGA signal formats which are compliant with VESA as in the table below.
87 Chapter 10: Appendix Acceptable signal formats for 3D * Side by Side (Full) is composed of left and right st ereoscopic pictures that each size is equal to 2D. Resolution Aspect r at io V. F r equency H. F r equency Pixel Clock F r equency 3D St r uctu r e 720 × 480p 16:9 59.
88 Chapter 10: Appendix Remote control functional key chart REMOTE CONTROL KEY Toshiba TV CABLE SAT (satellite) Blu-Ray DVD/VCR Combo DVD/ DVD-R VCR PVR Receiv e r / AMP CD LIGHT Lights the remote con.
89 Chapter 10: Appendix VOL +/- Volume up/ down Volume up/ down * 2 Volume up/ down * 2 Volume up/ down * 2 Volume up/ down * 2 Volume up/ down * 2 Volume up/ down * 2 Volume up/ down Volume up/ down .
90 Chapter 10: Appendix Note: • “---” = key does not send a signal in that remote control mode. *1 Does not sen d IR signal. *2 Volume affects the TV by default. When the volume is unl ocked, each device has its own volume if its ID has volume data.
91 Chapter 10: Appendix Operating other devices Your TV remote control has one ded icated TV mode and five programmable multi-brand modes: CABLE/ S AT , BD , DVD , VCR/PVR and AUX . Note: To operate a non-Toshiba device or a Tosh iba device that the remote control is not preprogrammed to operate, you must program the remote.
92 Chapter 10: Appendix Searching for a device code If you do not know the devi ce code for a particular device, you can view each ava ilable code for that device mode and sample th e functions to find th e code that operates the target device. 1 Press a mode select bu tton on the remote.
93 Chapter 10: Appendix Operating TV with combination buttons You can directly operate the TV power, input switch, picture size switch and pi cture mode switch with pressing a combination bo ttun while holding do wn a color button.
94 Chapter 10: Appendix Remote control codes In some cases, you may not be able to operate your device with the TV remote control. Your device may use a code that is not recognized by the TV remote control. If this happens, use the device’s remote control.
95 Chapter 10: Appendix Audio - Accessory Audio - Rece iver Satellite Set Top Box Quad 40157 Quasar 40029 RCA 41062, 4003 2, 40053, 40420, 40468 Realisti c 40420 Rotel 40157, 40 420 SAE 40157 Sansui 4.
96 Chapter 10: Appendix SAT/PVR Combo TV Video - VCR Hitachi 10819 HTS 10775, 1177 5 Hughes Network Systems 11142, 10749, 11749, 11442, 11443, 11444 Humax 11790 Jerrold 10869 JVC 10775, 1117 0, 11775 .
97 Chapter 10: Appendix Cable/PVR Combo DVD/VCR C ombo PVR Northgate 319 72 Olympus 30035 Optimus 31062, 3016 2, 30037, 30048, 31048 Orion 301 84, 30479 Pace 32763 Panasonic 31062, 30035, 30162, 30614.
98 Chapter 10: Appendix SAT/PVR Combo Video - DVD Microsoft 31972 Mind 31972 Motorola 32763 Niveus Media 31972 Northgate 319 72 Pace 32763 Panasonic 30614, 30616 Philips 3 0739, 3061 8 RCA 30880 Repla.
99 Chapter 10: Appendix DVD High Defi nition (Blu-Ray) DVD High Defi nition (HD-DVD) DVD-R DVD/VCR Combo Yamaha 20 490, 20539, 20646, 20545, 20497, 20817, 21416, 22558 Zenith 20503, 20741, 20591, 2086.
100 Chapter 10: Appendix Limited United States Warranty for LCD Televisions Toshiba America Consum er Products, L.L.C. (“TACP”) makes the following limited warranties to original cons umers in the United States.
101 Chapter 10: Appendix ALL WARRANTIES IMPLIED BY THE LAW O F ANY STATE OF THE U.S.A., INCLUDING THE IMPLIED WARR ANTIES OF MERCHANTABILITY AND FITNESS FO R A PARTICULAR PURPOSE , ARE EXPRES SLY LI MITED TO THE DURATION OF THE LIMITED WARRANTIES SET FORTH ABOVE.
102 Chapter 10: Appendix mounts, custom cabinets and other ins tallation methods that do not provide for direct and immediate access to the product for service purposes. Labour charge s for set installation, setup, adjustment of customer co ntrols, and installation or repair of antenna systems are not covered by these warranties.
103 Chapter 10: Appendix advertising, announcem ent, point of sale display, or promotional material relating to the Television; (iv) the relationships that result from this warranty, (the foregoing cl.
104 Index Numerics 3D format ............. ................. .......... 33 3D functions 3D Lock .................. .............. ... 35 3D PIN .................... .............. ... 34 3D Start Message .......... .......... 35 3D Timer Lock ........
105 Notes WX800U_EN.pdf 105 2010/08/11 10:14:55.
Corporate Headquarters: 82 TOTOWA ROAD, W A YNE, NJ 07470, U.S.A. NA TIONAL SERVICE DIVISION: 1420-B TOSHIBA DRIVE, LEBANON, TN 37087, U.S.A. PRINTED IN MEXICO (10-07) MANUF ACTURED BY HEAD OFFICE: 19.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Toshiba WX800U c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Toshiba WX800U - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Toshiba WX800U, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Toshiba WX800U va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Toshiba WX800U, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Toshiba WX800U.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Toshiba WX800U. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Toshiba WX800U ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
