Manuel d'utilisation / d'entretien du produit SG-1800 du fabricant Toshiba
Aller à la page of 42
Preparation Basics Caller ID/Call waiting Additional Information *SG-1800.qx 7/11/0 7:03 PM Page 1.
2 GETTING ST ARTED: DO THIS FIRST! FIRST , • Before you can take advantage of the Caller ID and Call W aiting features, you must subscribe to these services from your local telephone company . • Name and number caller ID only work in conjunction with service provided by your local telephone company .
T ABLE OF CONTENTS 3 Preparation IMPORT ANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . .5 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Features . . . . . . . . . . . . . . .
T ABLE OF CONTENTS 4 MEMORY DIALING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Storing numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Dialing a stored number . . . . . . . .
5 Preparation IMPORT ANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury . 1 Read and understand all instructions. 2 Follow all warnings and instructions marked on the product.
6 The RBRC TM Seal The RBRC TM Seal on the (easily removable) nickel-cadmium battery (contained in our product) indicates that T oshiba America Consumer Products, Inc.
INTRODUCTION 7 Preparation • 2.4GHz digital spread spectrum transmission with extended talk range • 30-channel auto scanning • 50 name & number Caller ID - only works in conjunction with ser.
8 AC Adaptor T AC-1700 Part #.RC009258 Rechargeable Battery Pack T oshiba TRB-8000 Part #.RC004931 Owner ’ s manual Part #.RC009260 INTRODUCTION Handset Base Unit Modular Line Cord Part #.RC008231 18 00 P ARTS IDENTIFICA TION Quick Reference Guide Part #.
LOCA TION OF CONTROLS 9 Preparation DELETE FUNCTION SELECT RDL/P TONE LOCAL L.D. CID Charging contacts BASE UNIT Headset jack (TONE) button (page 21) TONE/ (Memory) button (page 23) MEM (Redial/Pause).
10 INST ALLA TION SETTING UP THE BASE UNIT (DESK TOP MOUNTING) For setting up the base unit follow the instructions below . Snap the bracket ’ s tab into the notches on the base. • USE ONL Y WITH Supplied AC ADAPT OR (T AC-1700; power source AC 120V 60Hz/DC9V).
11 Preparation SETTING UP THE BASE UNIT (W ALL MOUNTING) MOUNTING ON A ST ANDARD W ALL PLA TE: Insert the bracket ’ s tabs into the base ’ s lower tab slots, then press down on the top of the bracket to snap it into the clip slots. • Route the cords through the guides.
CHARGING THE BA TTER Y P ACK 1 Remove the battery compartment cover on the back of the handset by sliding it down. 2 Plug the battery pack cord into the connector in the battery compartment by observing the correct polarity . It fits in only one way .
13 Preparation INST ALLA TION After the battery pack is fully charged; Operation Approx. battery life While in use (T alk mode) up to 6 hours While not in use (Standby mode) up to 7 days When "Low Battery"blinks on the LCD, the battery needs to be charged.
14 INST ALLA TION SETTING THE T ONE/PULSE SWITCH Set the T ONE/PULSE switch to T ONE. If the call does not connect with the T ONE setting, set the TONE/PULSE switch to PULSE. SETTING OR CANCELING THE AUT O T ALK FUNCTION If the handset is placed on the base unit, you can answer a call by simply lifting the handset from the base unit (Auto T alk).
INST ALLA TION 15 SETTING OR CANCELING CALLER ID ON CALL W AITING This function is preset to ON at the factory so that you will receive caller ID on Call W aiting when subscribing to both local telephone company services. If you do not subscribe to these services, be sure to set this function to OFF .
16 INST ALLA TION SETTING THE AREA CODE It is necessary to program your area code so that local calls will be properly displayed on caller ID. 1 Press . The LCD displays the following message. 2 Press or to move the pointer to Area Code. 3 Press . Enter a 3-digit area code.
17 Preparation CARR YING THE HANDSET IN THE BEL T CLIP Y ou can attach the Belt Clip to the handset in order to carry it on your belt. Attaching the Belt Clip to the Handset Insert the Belt Clip tabs into the holes on each side of the handset until they click.
18 BASIC OPERA TION MAKING A CALL 1 Key-in the phone number . The LCD displays the entered numbers. NOTE: T o delete a wrong number , press . T o delete all numbers, press and hold . 2 Press . “ T alk ” and the volume setting appears on the LCD. The number is dialed.
BASIC OPERA TION 19 Basics ANSWERING A CALL 1 When a call is received, the phone rings and the LCD displays as shown. 2 Press to connect. “ Talk ” and the volume setting appears on the LCD. 3 T o hang up, press or place the handset on the base unit.
20 BASIC OPERA TION CHANGING THE RINGER VOLUME Use the following procedure to set the ringer volume of the handset as desired. Press to select one of four ringer tone and volume combinations during standby mode. Each time you press ( ▼ or ▲ ), the LCD will display the setting and the phone will ring using the selected ringer .
BASIC OPERA TION 21 Basics 3 NUMBER REDIAL T o redial any of the last three numbers dialed from the handset (up to 32 digits): 1 Press during standby mode. The last dialed number (Redial 1) appears on the LCD. Each press of will display one of the three numbers dialed.
22 BASIC OPERA TION P AGING THE HANDSET 1 T o locate the handset while it is off the base, press . The handset beeps for 30 seconds and the LCD displays the following message: T o stop paging, press or twice, or return the handset to the base unit. NOTES: • Y ou cannot page the handset during a call.
23 Basics MEMOR Y DIALING Y ou can store up to 20 telephone numbers and their associated names in the memory . Y ou can program them yourself or transfer them from the Caller ID memory . NOTES: • Always press a button within 20 seconds after pressing the previous button.
24 MEMOR Y DIALING 4 Enter a name of up to 13 characters. Press or repeatedly to enter a space, alphanumeric characters: a space → A → B → ... → Y → Z → a → b → ... y → z → 0 → 1 → 2 ... 9 →→ # → - → & → ( → ) → a space → A → .
MEMOR Y DIALING 25 Basics DIALING A STORED NUMBER 1 Pick up the handset and press . 2 Press , or enter a two-digit number (01-20) to display the desired destination. NOTE: T o see the stored phone numbers, press . If appears next to the 12th digit, the number is longer than 13 digits.
26 MEMOR Y DIALING CHANGING AND DELETING ST ORED NUMBERS Y ou can delete a number or simply store another one in its place. When you store a new phone number , the data stored in that memory location is deleted automatically . 1 Pick up the handset and press and hold till a beep sounds.
MEMOR Y DIALING 27 Basics (1) Press to erase a character at the cursor position. The next character on the right moves to the cursor position. (2) Press . The LCD displays the programmed numbers screen. (3) Press to erase numbers, and enter the correct number .
28 CALLER ID/CALL W AITING • Before you can take advantage of the Caller ID and Call W aiting features, you must subscribe to these services from your local telephone company . • Name and number caller ID only work in conjunction with service provided by your local telephone company .
29 Caller ID/Call waiting CALLER ID/CALL W AITING CALL W AITING If you want to use the Call W aiting feature, you must subscribe to the Call W aiting service provided by your local telephone company . The LCD will show another incoming call even if you are currently engaged in a telephone conversation.
30 CALLER ID/CALL W AITING SEARCHING CALLER ID MEMOR Y T o review who has called your phone, follow the steps below . The caller ID memory retains a listing of the 50 most recent callers. 1 Pick up the handset and press . If new caller ID data does not exist: If there is new caller ID data: 2 Press to display the latest call record.
31 Caller ID/Call waiting DIAL OUT 1 Pick up the handset and press . Then, press or to display the number you wish to dial. 2 Press . The displayed number will be dialed. NOTE: T o enter a number for a long distance call, see “EDITING CALLER ID DA T A” page 32.
32 CALLER ID/CALL W AITING EDITING CALLER ID DA T A Y ou can edit the Caller ID data. 1 Pick up the handset and press . Then, press or repeatedly to display the Caller ID data you want to edit. 2 Press for a long distance call prefix “ 1 ” and for area code setting and cancellation.
33 Caller ID/Call waiting CALLER ID/CALL W AITING STORING T O SPEED DIAL MEMOR Y 1 Pick up the handset and press . Then, press or to bring up the number you wish to store into Speed Dial memory . 2 Press . The LCD displays the following screen. 3 Enter a two-digit number (01-20) or press , to select memory location.
34 CALLER ID/CALL W AITING DELETING CALLER ID DA T A DELETE INDIVIDUAL CALLER ID DA T A: 1 Pick up the handset and press . Then, press or to display the caller ID number you wish to delete from the memory . 2 Press . Press or to select Yes or No . 3 Press or .
35 Caller ID/Call waiting CALLER ID/CALL W AITING DELETE ALL CALLER ID DA T A: 1 Press . The LCD displays the following screen. 2 Press . Press or to select Yes or No . 3 Press or . If you select , a confirmation beep sounds and the LCD displays the total number of items “ 00 ” .
36 TROUBLESHOOTING PROBLEM No dialtone. No calls come in. Noise or interference. Battery pack goes low quickly . SOLUTION • The AC adaptor of the base unit is disconnected. → Plug the AC adaptor into the base unit and the AC 120V outlet. • The battery is low .
TROUBLESHOOTING 37 Additional Information PROBLEM The handset battery pack does not charge. The unit operates abnormally . “ Low battery ” blinks on the display . The operation is stopped. When the handset is returned to the base unit with the volume level set at Loud, a momentary squeal or howling sound may sometimes be heard.
38 W ARRANTY/SER VICE SER VICE REQUIREMENTS If the cordless telephone should malfunction, or need changes or modifications, all repairs will be performed by an authorized T oshiba Service Station. This unit has been registered with the FCC for direct connection to the telephone network.
39 Additional Information W ARRANTY/SER VICE How to Obtain W arranty Service In the ev ent a problem should develop with your product, please proceed as follo ws; All warranties implied by state law ,.
QUICK REFERENCE GUIDE Read the Owner’ s Manual for details. CALLER ID CORDLESS TELEPHONE SG-1600 SG-1800 UCZZ69701BA RC009261 Printed in China SETTING UP THE BASE UNIT CHARGING THE BA TTER Y P ACK R.
REFERENCIA RÁPIDA Para los detalles, lea el manual de instrucciones (en inglés). CALLER ID CORDLESS TELEPHONE SG-1600 SG-1800 UCZZ69701BA RC009261 INST ALACIÓN DE LA UNIDAD BASE CARGA DE LA BA TER.
IMPORT ANT We suggest you record the following information and retain for your records along with your bill of sale or equipment document. Model no.__________________ Serial no.______________ Purchase date______________ Dealer_________________ Dealer address _____________________________________ © 2000 TOSHIBA AMERICA CONSUMER PRODUCTS, INC.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Toshiba SG-1800 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Toshiba SG-1800 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Toshiba SG-1800, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Toshiba SG-1800 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Toshiba SG-1800, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Toshiba SG-1800.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Toshiba SG-1800. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Toshiba SG-1800 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
