Manuel d'utilisation / d'entretien du produit SD-V280 du fabricant Toshiba
Aller à la page of 76
D VD VIDEO PLA YER & VIDEO C ASSETTE RECORDER SD-V280 OWNER’S MANUAL 79077192 2 14 22 29 34 39 Introduction Connections Basic setup Playback (VCR) Recording (VCR) Other functions (VCR) DIGITAL V.
2 Introduction IMPORT ANT SAFEGUARDS W ARNING: T O REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, do not expose this appliance to rain or moisture. CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD, RECEPT ACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULL Y INSERTED TO PREVENT BLADE EXPOSURE.
3 Introduction 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RET AIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED W ARNINGS All warnings on the unit and in the operating instructions should be adhered to.
4 Introduction IMPORT ANT SAFEGUARDS 13. LIGHTNING T o protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges.
5 Introduction EXAMPLE OF ANTENNA GROUNDING AS PER THE NA TIONAL ELECTRICAL CODE CONDENSA TION Moisture will form in the operating section of the DVD/VCR if the player is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly .
6 Introduction Notes on handling When shipping the DVD/VCR, the original shipping carton and packing materials come in handy . For maximum protection, repack the unit as it was originally packed at the factory . Do not use volatile liquids, such as insect spray , near the DVD/VCR.
7 Introduction Notes on discs On handling discs Do not touch the playback side of the disc. Do not attach paper or tape to discs. On cleaning discs Fingerprints and dust on the disc cause picture and sound deterioration. Wipe the disc from the center outwards with a soft cloth.
8 Introduction DIGITAL VIDEO About this owner ’ s manual This owner ’s manual explains the basic instructions of this DVD/VCR. Some DVD video discs are produced in a manner that allows specific or limited operation during playback. As such, the DVD/VCR may not respond to all operating commands.
9 Introduction IMPORTANT SAFEGUARDS .......................... 2 Power source ................................................... 5 Precautions ...................................................... 6 Notes on discs ...................................
10 Introduction REC button 34 EJECT ON/STANDBY VIDEO LINE IN 2 L(MONO) - AUDIO - R CHANNEL INPUT SELECT VCR/DVD SELECT VCR DVD STOP PLA Y /REW FWD/ REC OPEN/CLOSE Identification of Controls See the page in for details.
11 Introduction VCR operation Status CH 125 8 : 47 AM MON 00 : 00 : 00 SP STEREO SAP While watching TV DAY OF THE WEEK CHANNEL TAPE SPEED REAL TIME COUNTER CLOCK STEREO AND SEPARATE AUDIO PROGRAM (SAP.
12 Introduction Remote control * MENU button Use the MENU button to display the menu included on many DVD video discs. T o operate a menu, follow the instructions in “Locating a title using the top menu.
13 Introduction Operation • Aim the remote control at the remote sensor and press control buttons to operate. • Operate the remote control within 30 ° angle on either side of the remote sensor , up to a distance of Approx. 7 meters. Replace the compartment cover .
14 Connections OUT (TO T V) IN (FROM ANT ) OUT (TO T V) IN (FROM ANT ) OUT (TO T V) IN (FROM ANT ) Notes: • A clear picture will not be obtained by the DVD/VCR unless the antenna signal is good. Connect the antenna to the DVD/VCR properly . • For better quality recording, an indoor antenna or a telescopic antenna is not recommended.
15 Connections UHF VHF UHF VHF VHF/UHF IN Note: If a VHF or UHF antenna is used, set the TV/CATV menu option to the "TV" mode. Note: If a VHF or UHF antenna is used, set the TV/CATV menu option to the "TV" mode. Note: If a VHF or UHF antenna is used, set the TV/CATV menu option to the "TV" mode.
16 Connections CA TV (CABLE TV) connections VHF/UHF IN (ANT) OUT (TO TV) IN (FROM AN T) VHF/UHF IN (ANT) OUT (TO TV) IN (FROM AN T) VHF/UHF IN (ANT) OUT (TO TV) IN (FROM AN T) Many cable companies offer services permitting reception of extra channels including pay or subscription channels.
17 Connections VHF/UHF IN (ANT) A B OUT (TO TV ) IN (FROM ANT) VHF/UHF IN (ANT) A B OUT (TO TV ) IN (FROM ANT) This DVD/VCR cannot receive scrambled programs since it does not contain a descrambler . In order to receive scram- bled programs, your existing descrambler must be used.
18 Connections 56 58 7230007448 DVD OUT DVD, VC R OUT LINE IN 1 UHF/V HF ANALOG AUDIO L Y P B P R VIDEO L R AUDIO VIDEO L (MONO) R 3 CH 4 AUDIO IN (FROM ANT) OUT (TO TV) R COMPONE NT S DIGITAL AUDIO OPTICAL C OAXIAL Connecting to a TV Connect the DVD/VCR to your TV .
19 Connections T o P R video input 56 58 7230007448 DVD OUT DVD, VCR OUT LINE NI1 UHF/VHF ANALOG AUDIO L Y P B P R VIDEO L R AUDIO VIDEO L (MONO) R 3 CH 4 AUDIO IN (FROM ANT) OUT (TO TV) R COMPONENT S DIGIT AL AUDIO OPTICAL COAXIAL T o P R VIDEO OUT Notes: • Refer to the owner ’s manual of the connected equipment as well.
20 Connections 75 Ω coaxial cable 56 58 56 58 56 58 52 52 7230007448 DVD OUT DVD, VCR OUT LINE IN1 UHF/VHF ANALOG AUDIO L Y P B P R VIDEO L R AUDIO VIDEO L (MONO) R 3 CH 4 AUDIO IN (FROM ANT) OUT (T.
21 Connections 7230007448 DVD OUT DVD, VCR OUT LINE IN1 UHF/VHF ANALOG AUDIO L Y P B P R VIDEO L R AUDIO VIDEO L (MONO) R 3 CH 4 AUDIO IN (FROM ANT) OUT (TO TV) R COMPONENT S DIGITAL AUDIO OPTICAL COA.
22 Basic setup Setting the video channel When a TV is connected with the 75 ohm coaxial cable only . T o view playback of a recorded tape or DVD disc, or to watch a program selected by the VCR's channel selector , the TV must be set to channel 3 or 4 (video channel).
23 Basic setup Press SET + or – to select “LANGUAGE”, then press ENTER. Press VCR MENU. If you use the unit for the first time and press VCR MENU , instead of the main menu screen on the right the “SYSTEM SET UP” menu screen in step 2 may appear .
24 Basic setup Connect the Antenna or Cable system. • If you use a cable box, turn it on. Cloc k setting The Auto Clock function will automatically set the built-in clock (Month, Day , Y ear and T ime) when the DVD/VCR is connected to an Antenna or Cable system and it is turned off.
25 Basic setup 〈 +/ - /ENTE R/ME NU 〉 MENU TIMER RE C SE T AUTO RE P EA T ON OFF ON OFF SAP CH SET UP SYSTE M SET UP Press VCR MENU. 1 Press SET + or – to select “SYSTEM SET UP”, then press ENTER. 2 Press SET + or – to select “ST ANDARD TIME” , then Press ENTER.
26 Basic setup 2-4 Press VCR MENU. EXAMPLE: Setting the clock to "8:30 AM" March, 23 (SA T), 2002. 1 8 : 30 AM SAT Manual clock setting After setting the clock, date and time starts functioning automatically . 6 Note: After a power failure or disconnection of the power, the timer settings will be lost.
27 Basic setup T uner setting This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory , skipping over unwanted channels. Before selecting channels, they must be programmed into the DVD/VCR’s memory .
28 Basic setup Repeat the step 1 on page 27. Then press SET + or – to select the “ADD/DELETE” and press ENTER. 1 T o ADD/DELETE channels Press VCR MENU until the menu screen is cleared.
29 Basic setup Loading and unloading a cassette tape Use only video cassette tapes marked and . Loading Remove the erase prevention tab with a screwdriver. Cover the hole with a piece of adhesive tape. To record again Screwdriver Automatic tape eject This DVD/VCR will automatically rewind the tape when the tape has ended.
30 Playback (VCR) Cassette tape playback T o play a prerecorded tape. Load a prerecorded tape (When loading a cassette tape without the erase prevention tab, playback will start automatically). Preparation: • T urn ON the TV and select the corresponding video input.
31 Playback (VCR) Special playbac k Picture search Reverse picture search function Press REW once or twice during playback. Forward picture search function Press FWD once or twice during playback. To return to playback, press PLAY . Press PAUSE during playback.
32 Playback (VCR) Con v enience function T o cancel repeat mode : Follow the above step 1 , then press ENTER to select “OFF” position. Press VCR MENU to return to the TV . Press VCR MENU. Press SET + or – to select “AUT O REPEA T”. 1 Press ENTER to select “ON” or “OFF”.
33 Playback (VCR) This function enables you to locate the beginning of any recording made on the VCR. Recording an INDEX MARK The Index Search function auto- matically records an INDEX mark on the tape whenever a record- ing is initiated. Index search Press INDEX or during stop or play mode.
34 Recording (VCR) Recording a TV program Recording and viewing the same TV program Recording a TV program Load a cassette tape with the erase prevention tab intact. The DVD/VCR will automatically turn on. Preparation: • T urn ON the TV and set to the video input mode.
35 Recording (VCR) Recording one program while watching another Press STOP to stop recording. " " will appear on screen for about 4 seconds. Press PAUSE/STILL to avoid recording unwanted material. Press again to continue the recording. " " will appear on screen for about 4 seconds.
36 Recording (VCR) One-touch T imer Recording (O TR) The One-touch T imer Recording feature provides a simple and convenient way to make a timed recording.
37 Recording (VCR) T imer recording T imer recording can be programmed on-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 month. T imer recording Notes: • Press CANCEL to move cursor backward for correction.
38 Recording (VCR) Setting procedure T o set daily/weekly timer T o confirm Timer program: At picture 1 on the previous page select “TIMER REC SET” and press ENTER .
39 Recording (VCR) Ster eo recording and playback / Separate A udio Program (SAP) When a MTS STEREO broad- cast is received, “STEREO” will appear on the screen and the program can be viewed or re- corded in stereo. The Hi-Fi stereo recording pro- cedure is the same as for normal recordings.
40 Other functions (VCR) S P PM Duplicating a video tape If you connect the DVD/VCR to another VCR or Camcorder , you can duplicate a previously recorded tape. Make all connections before turning on the power . Duplicating a video tape For duplicating a previously recorded tape from a camcorder, follow the camcorder manufacturer’s instructions.
41 Other functions (VCR) Recor ding a D VD/CD disc Y ou can record disc material in DVD, Audio CD, etc. onto a Video tape with this DVD/VCR. Duplicating a DVD or CD disc Press SP/SLP to select the desired tape speed SP or SLP . Preparation: • T urn ON the TV and select the corresponding video input.
42 Basic playback (DVD) Playing a disc This section shows you the basics on how to play a disc. CAUTION Keep your fingers well clear of the disc tray as it is closing.
43 Basic playback (DVD) T o pause playback (still mode) Press P AUSE/STILL during playback. T o resume normal playback, press the PLA Y button. • The sound is muted during still mode. T o stop playback Press STOP . T o remove the disc Press OPEN/CLOSE .
44 Basic playback (DVD) FWD Playing a disc (continued) Y ou can play discs at various speeds, and resume playback from the location where you stopped playback.
45 Basic playback (DVD) Playing in slow-motion Press SLOW during playback. Each time you press the SLOW button, the slow-motion speed changes. T o resume normal playback Press PLA Y .
46 Basic playback (DVD) Loca ting a specific title, c hapter , or track Normally , DVD video discs are divided into titles, and the titles are sub-divided into chapters. VIDEO CDs and audio CDs are divided into tracks. Y ou can quickly locate any specific title, chapter , or track.
47 Basic playback (DVD) Notes: • If you press the PLA Y MODE button during playback, the DVD/VCR automatically starts repeat playback and random playback after finishing the current title, chapter or track. • Some discs may not permit repeat operation.
48 Advanced playback (DVD) D VD V CD C D Pla ying in a favorite or der Y ou can combine your favorite titles, chapters, or tracks and play them in the order you determine.
49 Advanced playback (DVD) Zooming a picture Y ou can magnify areas within a picture. Zooming a picture D V D Press ZOOM during normal, slow or still playback. The DVD/VCR enters the zoom playback mode and displays the icon. : As you repeatedly press the ENTER (or ZOOM) button while “ZOOM” is selected, the magnification level changes.
50 Advanced playback (DVD) Selecting the camera angle If the scene was recorded from multiple angles, you can easily change the camera angle of the scene you are watching. Changing the camera angle Press ANGLE while playing a scene recorded with multiple angles.
51 Advanced playback (DVD) Selecting subtitles Y ou can display subtitles on the TV screen and select a subtitle language from those included on the DVD video disc. Selecting a subtitle language Press SUB TITLE during playback. The current subtitle setting is displayed.
52 Advanced playback (DVD) Selecting a language Y ou can select a preferred language and sound recording system from those included on the DVD video disc. Selecting a playback audio setting Press AUDIO during playback. The current audio setting is displayed.
53 Advanced playback (DVD) Select the sound enhancement by pressing / . Each time you press the button, the sound enhancement changes. 3 Normal: Normal sound.
54 Advanced playback (DVD) On-screen display operation When you turn on the on-screen display , you can view information on operational status and access features and settings. Press DISPLA Y . The following display appears. Each time you press the DISPLA Y button, the on-screen display changes as follows.
55 Advanced playback (DVD) On-screen display operation (continued) D V D V C D C D Press DISPLA Y again. The on-screen display will vary depending on the disc. : Data transfer rate (Mbit/s) = Amount of picture, sound and subtitle data in the DVD video disc transferred per second.
56 Function setup (DVD) Customizing the function settings Y ou can change the default settings to customize performance to your preference. Press SET UP during stop. The following on-screen display appears. Press / to select a symbol for the setting you want to change.
57 Function setup (DVD) TV Shape Audio Out Select Dynamic Range Control Karaoke V ocal On-Screen Language Disc Menu Language Audio Language Subtitle Language On-Screen Displays Background Screen Saver.
58 Function setup (DVD) Customizing the function settings (continued) TV Shape 4:3 Letterbox: Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture. 4:3 Normal: Select when a standard 4:3 TV is connected.
59 Function setup (DVD) Karaoke V ocal Off: The primary vocal is not output. On: The primary vocal is output when it is recorded on the disc. Notes: • The vocal output feature is used during playback of Dolby Digital (multi-channel) recorded DVD KARAOKE discs.
60 Function setup (DVD) 3) Press the / buttons to shift and select the second character by pressing the / buttons. 4) Press the ENTER button. Notes: • Some DVD video discs may be set to display subtitles in a different language than you selected. A prior subtitle language may be programmed on the disc.
61 Function setup (DVD) On-Screen Displays Off: Operational modes (e.g. “ ”, “ ”) are not displayed. On: Operational modes (e.g. “ ”, “ ”) are displayed on-screen. Background Blue: Blue background. Gray: Gray background. Picture: T o use the picture which appears when you turn on the DVD/VCR as a background.
62 Function setup (DVD) (Continued) 1) Press the number buttons to create a personal 4-digit security code, then press the ENTER button. If you make a mistake before pressing the ENTER button, press the CANCEL button and enter your 4-digit security code again.
63 Function setup (DVD) Title Stop Off: The DVD/VCR continues after playback of a title is completed. On: The DVD/VCR stops after playback of a title is completed. PBC Off: When playing a VIDEO CD without using the menu. On: T o use the menu when playing a PBC-featured VIDEO CD.
Others 64 T able of languages and their abbreviations – – – CHI (ZH) DUT (NL) ENG (EN) FRE (FR) GER (DE) IT A (IT) JPN (JA) KOR (KO) MA Y (MS) SP A (ES) AA AB AF AM AR AS A Y AZ BA BE BG BH BI B.
65 Others Bef or e calling service personnel Check the following guide for the possible cause of a problem before contacting service. SYMPTOMS POSSIBLE SOLUTIONS • Make sure the power cord is plugged in. • Try another AC outlet. • Power is off, check fuse or circuit breaker.
66 Others AC 120V 60Hz Operation: 20W , Stand by: 4W 9.9lbs (4.5 kg) Width : 16-15/16 inches (430 mm) Height : 3-7/8 inches (99 mm) Depth : 12-3/8 inches (314.
67 Others LIMITED W ARRANTY DVD VIDEO PLA YER T oshiba America Consumer Products, Inc. (“T ACP”), T oshiba Hawaii (“THI”) and T oshiba Canada Limited (“TCL”) make the following limited warranties.
Printed in Thailand 2A70901D U 02/07 How to Obtain Warranty Service (1) Ref er to the troubleshooting guide in your owner’ s manual. This check list ma y solve your prob lem.
DVD VIDEO PLA YER & VIDEO CASSETTE RECORDER SD-V280A DIGITAL VIDEO W ARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, do not expose this appliance to rain or moisture. W ARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RET AIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to.
Connecting to a TV 7230007448 DVD OUT DVD, VCR OUT LINE IN1 UHF/VHF ANALOG AUDIO L Y P B P R VIDEO L R AUDIO VIDEO L (MONO) R 3 CH 4 AUDIO IN (FROM ANT) OUT (TO TV) R COMPONENT S DIGIT AL AUDIO OPTICA.
Auto clock setting Manual clock setting Connect the Antenna or Cable system. • If you use a cable box, turn it on. 1 Plug the AC Power cord to the AC outlet. 2 Make sure the DVD/VCR is turned off. • If you press POWER , the Auto Clock set is not programmed.
Reverse picture search function Press REW once or twice during playback. Forward picture search function Press FWD once or twice during playback. To return to playback, press PLAY . Press PAUSE/STILL during playback. To resume normal playback, press PLAY or PAUSE/STILL .
T imer recording Press VCR MENU . 1 Press SET + or – to select one of the program line, then 2 Press SET + or – to select the date, then press ENTER . 3 Set the start time, end time, channel and tape speed as 4 T o enter other programs, repeat step 2 through 4 .
Press STOP to end playback. • The unit records the stopped point, depending on the disc. “ ” appears on the screen. Press PLA Y to resume playback (from the scene point). • If you press STOP again or unload the disc ( “ ” appears on the screen.
Press SKIP( ) Forward or SKIP( ) Reverse during playback to locate a chapter that you want to watch. Each time you press the button, a chapter or track is skipped. Inserting Batteries 1 2 Install two "AAA" batteries (supplied), paying attention to the polarity diagram in the battery compartment.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Toshiba SD-V280 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Toshiba SD-V280 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Toshiba SD-V280, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Toshiba SD-V280 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Toshiba SD-V280, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Toshiba SD-V280.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Toshiba SD-V280. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Toshiba SD-V280 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
