Manuel d'utilisation / d'entretien du produit L635 du fabricant Toshiba
Aller à la page of 215
Satellite/Satellite Pro/L630/L 635 Maintenance Manual Toshiba Personal Computer Satellite L630/L635 (PSK00x/PSK01x) (PSK04x/PSK05x) Maintenance Manual TOSHIBA CORPORATION S/ No.
ii Satellite/Satellite Pro/L630/L 635 Maintenance Manual Copyright © 2010 by Toshiba Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed with respect to the use of the inform ation contained herein.
Satellite/Satellite Pro/L630/L 635 Maintenance Manual iii Preface This maintenance manual describes how to perform hardware service maintenance for the Toshiba Personal Computer Satellite/Satellite Pro/L630/L635, referred to as Satellite/Satellite Pro/L630/L635 in this manual.
iv Satellite/Satellite Pro/L630/L 635 Maintenance Manual The manual is divided into the following parts: Chapter 1 Hardware Overview describes the Satellite/Satellite Pro/L630/L635 system unit and each FRU. Chapter 2 Troubleshooting Procedures explains how to diagnose and resolve FRU problems.
Satellite/Satellite Pro/L630/L 635 Maintenance Manual v Conventions This manual uses the following formats to describe, identify, and highlight term s and operating procedures. Acronyms On the first appearance and whenever necessary for clarification acronyms are enclosed in parentheses following their definition.
vi Satellite/Satellite Pro/L630/L 635 Maintenance Manual Table of Contents Chapter 1 Hardware Overview 1.1 Features ................................................................................................................... .............5 1.2 System Unit Components .
Satellite/Satellite Pro/L630/L 635 Maintenance Manual vii Procedure 5 Connector Check and Replacement Check................................... 2-13 2.6 Keyboard ..................................................................................
viii Satellite/Satellite Pro/L630/L 635 Maintenance Manual 3.2.7 DMI Write ................................................................................................9 3.2.8 System Information .....................................................
Satellite/Satellite Pro/L630/L 635 Maintenance Manual ix Assembly Procedures ........................................................................................... 4-5 Tools and Equipment ..........................................................
x Satellite/Satellite Pro/L630/L 635 Maintenance Manual 4.8 Top Cover ............................................................................................................. 4-24 Installing the Top Cover .........................................
Satellite/Satellite Pro/L630/L 635 Maintenance Manual xi Removing the Switch board and Button board .................................................. 4-47 Installing the Switch board and Button board ..................................................
xii Satellite/Satellite Pro/L630/L 635 Maintenance Manual Appendices Appendix A Handling the LCD Module ........................................................................... A-1 Appendix B Board Layout ...........................................
Chapter 1 Hardware Overview.
1 Hardware Overview ii Satellite/Satellite Pro/L630/L635 Maintenance Manual.
1 Hardware Overview Satellite/Satellite Pro/L630/L635 Maintenance Manual iii Chapter 1 Contents 1.1 Features ................................................................................................................... ............ 5 1.2 System Unit Components .
1 Hardware Overview iv Satellite/Satellite Pro/L630/L635 Maintenance Manual Figures Figure 1-1 ID Parts Description Placement ............................................................................... 9 Figure 1-2 Computer Block Diagram .........
1.1 Features 1 Hardware Overview Satellite/Satellite Pro/L630/L635 Maintenance Manual 5 1.1 Features Toshiba Satellite L630/L635/Satellite Pro L630/L635 is a full size notebook PC based on the mobile Intel Arrandale Processor, providing high-speed processing capabilities and advanced features.
1 Hardware Overview 1.1 Features 6 Satellite/Satellite Pro/L630/L635 Maintenance Manual The computer has two SO-DIMM slots, which com e standard with DDR3-1066MHz (PC3-8500) memory m odule. DDR3 is driv en at 1.5V. It accepts BTO/CTO for your memory requirem ents.
1.1 Features 1 Hardware Overview Satellite/Satellite Pro/L630/L635 Maintenance Manual 7 Wireless LAN (BTO) The internal Mini Card slot suppor ts IEEE802.11bg (MOW) / IEEE802.11abg (MOW) / IEEE802.11abgn (MOW) / IEEE802.11bgn (MOW) / IEEE802.11bg w/BT / IEEE802.
1 Hardware Overview 1.1 Features 8 Satellite/Satellite Pro/L630/L635 Maintenance Manual RGB External Monitor Port A 15-pin external monitor port is provided, through which the computer autom atically recognizes an external VESA DDC 2B compatible monitor.
1.1 Features 1 Hardware Overview Figures 1-1/1-2/1-3 and 1-4 show the com puter and its system unit configuration, respectively. Figure 1-1 ID Parts Description Placement Satellite/Satellite Pro/L.
1 Hardware Overview 1.1 Features Figure 1-2 Computer Block Diagram 10 Satellite/Satellite Pro/L630/L635 Maintenance Manual.
1.1 Features 1 Hardware Overview Figure 1-3 System Board Configurations Satellite/Satellite Pro/L630/L635 Maintenance Manual 11.
1 Hardware Overview 1.2 System Unit Components 1.2 System Unit Components Figure 1-4 is Block Diagram of the System Unit. Figure 1-4 System Unit Block Diagram 12 Satellite/Satellite Pro/L630/L635 Main.
1.2 System Unit Components 1 Hardware Overview Satellite/Satellite Pro/L630/L635 Maintenance Manual 13 The system unit of the computer consists of the following com ponents: Processor: Mobile Intel Arrandale Processor. Intel Core i5 Processor (FSB, 1066MHz) Core Speed: 2.
1 Hardware Overview 1.2 System Unit Components 14 Satellite/Satellite Pro/L630/L635 Maintenance Manual System Controller Mobile Intel 5 Series Chipset HM55 PCH Direct Media Interface (DMI).
1.2 System Unit Components 1 Hardware Overview Satellite/Satellite Pro/L630/L635 Maintenance Manual 15 Digital microphone interface with internal MIC boost supporting Jack sense detects up to 4 jacks using only one sense pin Digital Mixer +3.
1 Hardware Overview 1.2 System Unit Components 16 Satellite/Satellite Pro/L630/L635 Maintenance Manual Atheros AR8152 / AR8151 - 10/100Mbit / 1Gbit IEEE802.
1.3 2.5-inch HDD 1 Hardware Overview 1.3 2.5-inch HDD The computer contains an extremely low-pr ofile, lightweight and high-perform ance HDD. The HDD incorporates 9.5 mm height m agnetic disk and mini-Winchester type m agnetic heads. The HDD interface conforms to Seri al ATA.
1 Hardware Overview 1.4 DVD Super Multi (+-R Double Layer) 1.4 DVD Super Multi (+-R Double Layer) The DVD Super Multi drive accepts 12-cm (4.72-in ch) and 8-cm (3.
Error! Reference source not found. 1 Hardware Overview 1.5 Blu-Ray Writer Blu-Ray Writer drive accepts 12-cm (4.72-inch) or 8-cm (3.15-inch) discs. At maximum , it can read CD-ROM at 24x speed, play DVD-RO M at 8x speed, read BD-ROM Video at 1.
1 Hardware Overview 1.7 Batteries 20 Satellite/Satellite Pro/L630/L635 Maintenance Manual 1.6 Power Supply The power supply unit provides many different volta ges for the system board and perform s the following functions: 1. Power input monitor Checks whether the DC power supply (AC adapter) is connected to the computer.
1.5 Blu-Ray Writer Blu-Ray Writer drive accepts 12-cm (4.72-inch) or 8-cm (3.15-inch) discs. At maximum , it can read CD-ROM at 24x speed, play DVD-ROM at 8x speed, read BD-ROM Video at 1.
1 Hardware Overview 1.7 Batteries 22 Satellite/Satellite Pro/L630/L635 Maintenance Manual 12 Cell Lithium Ion 10.8 V 9000 mAh RTC Battery Lithium Ion 3.0 V 14 mAh 1.7.1 Main Battery The main battery pack serves as the comput er' s main power source when the AC adapter is not attached.
1.7 Batteries 1 Hardware Overview Satellite/Satellite Pro/L630/L635 Maintenance Manual 23 3. The battery or AC adapter voltage is abnormal. Detection of full charge A full charge is detected only when the ba ttery is being charged by quick or normal charge.
2 Troubleshooting Satellite/Satellite Pro/L630/L635 Maintenance Manual 2-i 2 概要 Chapter 2 Troubleshooting.
2 Troubleshooting 2-ii Satellite/Satellite Pro/L630/L635 Maintenance Manual Chapter 2 Contents 2.1 Outline .................................................................................................................... 2-1 2.2 Basic Flowchart .
2 Troubleshooting Satellite/Satellite Pro/L630/L635 Maintenance Manual 2-iii 2.10 Audio Test ............................................................................................................ 2-20 Procedure 1 Test Program Check .....
.
2.1 Outline 2 Troubleshooting 2-1 Satellite/Satellite Pro/L630/L635 Maintenance Manual 2.1 Outline This chapter describes the fault diagnosis proce dures for field replaceable units (FRUs) in the computer. The FRUs covered here are as follows: 1. System board 2.
2 Troubleshooting 2.2 Basic Flowchart Satellite/Satellite Pro/L630/L635 Maintenance Manual 2-2 2.2 Basic Flowchart The basic flowchart in Figure 2-1 serves as a guide for identifying a possibly faulty FRU.
2.2 Basic Flowchart 2 Troubleshooting Star t Connect the AC Adapter BATTERY LED / DC IN LED on ?? Turn the power on. Any error message displayed ?? Message "Toshiba Leading Innovation "displayed Follow the power supply diagnostic Procedure in Section 2.
2 Troubleshooting 2.2 Basic Flowchart Satellite/Satellite Pro/L630/L635 Maintenance Manual 2-4 Figure 2-1 Basic Flowchart (2/2) Keyboard works well ?? Follow the keyboard diagnostic procedure in Section 2.6 1 N o Diagnostic Program Loaded?? Perform each test with the diagnostic program.
2.2 Basic Flowchart 2 Troubleshooting 2-5 Satellite/Satellite Pro/L630/L635 Maintenance Manual If the diagnostic program cannot detect an er ror, the error may be interm ittent.
2 Troubleshooting 2.3 Power Supply 2.3 Power Supply The power supply in the computer controls ma ny functions and com ponents. To check if the power supply is defective or malfunctioning, foll ow the troubleshooting procedures below as instructed.
2.3 Power Supply 2 Troubleshooting Procedure 2 Connection Check Power is supplied to the system board as illustrated below: AC adaptor System board AC power cord AC adaptor cord Battery pack Follow th.
2 Troubleshooting 2.4 System Board Satellite/Satellite Pro/L630/L635 Maintenance Manual 2-8 2.4 System Board To check if the system board is defectiv e or malfunctioning, f ollow the troubleshooting procedures below as instructed.
2.4 System Board 2 Troubleshooting 2-9 Satellite/Satellite Pro/L630/L635 Maintenance Manual Procedure 2 Test Program Check The maintenance test program contains severa l programs for diagnosing the system board and CPU. Execute the following test programs us ing the procedures described in Chapter 3.
2 Troubleshooting 2.5 HDD Satellite/Satellite Pro/L630/L635 Maintenance Manual 2-10 2.5 HDD To check if the 9.5mm HDD is defective or malfunctioning, follow the troubleshooting procedures below as instructed.
2.5 HDD 2 Troubleshooting 2-11 Satellite/Satellite Pro/L630/L635 Maintenance Manual create a DOS partition on drive C. Then restart the computer.. If the problem persists, go to Procedure 3. Check 3 If drive C is listed as active in the FDISK menu, perform Check 4.
2 Troubleshooting 2.5 HDD Table 2- 1 HDD Error Code and Status Code Status Get Parameter Fail ! 1 Read Old Data Error 2 Write Pattern Error 3 Read Back Data Error 4 Data Compare Error 5 Restore Data E.
2.5 HDD 2 Troubleshooting Procedure 5 Connector Check and Replacement Check The HDD, system board or CPU may be faulty. Disassemble the com puter following the steps described in Chapter 4 and perform the following checks: Check 1 Make sure the follow ing connectors have been firmly connected to the HDD, system board and CPU.
2 Troubleshooting 2.6 Keyboard 2.6 Keyboard To check if the computer’s keyboard is def ective or malfunctioning, follow the troubleshooting procedures below as instructed.
2.7 Display 2 Troubleshooting 2.7 Display To check if the computer’s display is def ective or malfunctioning, follow the troubleshooting procedures below as instructed.
2 Troubleshooting 2.7 Display Check 3 The FL may be fault y. Replace it w ith a new one and return to Procedure 3. If there is still an error, perform C heck 4. Check 4 The FL inverter board may be fau lty. Replace it with a new one and return to Procedure 3.
2.8 ODD (Optical Disk Drive) 2 Troubleshooting 2.8 ODD (Optical Disk Drive) To check if the internal ODD drive is defec tive or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 ODD Cleaning Check Procedure 2 Test Program Check Procedure 3 Connector Check and Replacement Check Procedure 1 ODD Cleaning Check 1.
2 Troubleshooting 2.8 ODD (Optical Disk Drive) Satellite/Satellite Pro/L630/L635 Maintenance Manual 2-18 Check 3 The ODD drive may be faulty. Replace the ODD drive with a new one following the steps in Chapter 4. If the ODD drive is still not functio n ing properly, perform Check 4.
2.9 LAN 2 Troubleshooting 2-19 Satellite/Satellite Pro/L630/L635 Maintenance Manual 2.9 LAN To check if the computer’s LAN is defec tive or malfunctioning, follow the troubleshooting procedures below as instructed.
2 Troubleshooting 2.10Audio Test 2.10 Audio Test To check if the computer’s Speaker is def ective or malfunctioning, fo llow the troubleshooting procedures below as instructed.
2.11 Cooling Module 2 Troubleshooting 2.11 Cooling Module To check if the computer’s cooling module is defective or malfunctioning, f ollow the troubleshooting procedures below as instructed.
Chapter 3 Diagnostic Programs.
3 Diagnostic Programs ii Satellite /Satellite Pro L630/L 635 Maintenance Manual Chapter 3 Contents 3.1 .......................................................................................................................... 1 General 3.2 ...........
3 Diagnostic Programs Satellit e/Satellite Pro L630/L 635 Maintenance Manual iii 3.10 .................................................................................................................... 52 Peripheral 3.11 .............................
.
3.1 General 3 Diagnostic Programs Satellit e/Satellite Pro L630/L 635 Maintenance Manual 1 3.1 General This chapter explains the dia gnostic programs which tests and di agnoses the functions of the hardware components of this computer. The di agnostic programs can be classified into two types: OPTION and DIAGNOSTIC TEST.
3 Diagnostic Programs 3.1 General 2 Satellit e/Satellite Pro L630/L 635 Maintenance Manual A Service Diagnostic BOOT CD or USB Flash Memory A Formatted FLOPPY DISK A Test Media CD (A-BEX T.
3.2 Quick Start 3 Diagnostic Programs 3.2 Quick Start When the system is booting from Service Diagnostic CD or USB Flash Mem ory, the following screen will be displayed: Please select a test item or select 0 to exit to Free -DOS: 3.
3 Diagnostic Programs 3.2 Quick Start 1. Use arrow key to select ‘TouchPad’ item on ‘Peripheral’ in the m enu, then press Space key to select it. (When it is being selected, there is a X m arked in the [ ] ) Select ‘Test Mouse’ or press F8 to run the test.
3.2 Quick Start 3 Diagnostic Programs Here is another method to run the test: Highl ight a test item by us ing arrow keys, then, press Enter to start. If there are parameters pr ovided, user should set para meters in the parameter dialog window. CPU Speed Test (Step by Step): 1.
3 Diagnostic Programs 3.2 Quick Start 3. Test Result System will automatically run and display the tes t result as follows: Following is the comparison report of the two testing methods m entioned abo.
3.2 Quick Start 3 Diagnostic Programs As to the method adopted in CPU Speed test , user should highlight the test item and press Enter to start testing. And the user has to setup the parameters every time before running the test. Using this method, only one test item would be tested at one time.
3 Diagnostic Programs 3.2 Quick Start It requires user to press the key and ch eck whether the key in the screen changes color or not. User can terminate test by typing ‘ END ’. When testing the ‘ Fn ’ key, it must press the ‘ ESC ’ key at the same time.
3.2 Quick Start 3 Diagnostic Programs 3.2.6 DMI Read Read the information from the syste m’s SMBIOS and display it in the screen as f o llows: User can press any key to exit the program.
3 Diagnostic Programs 3.2 Quick Start In this screen, there are two lines which attribute could be edited and updated. The 1 st line (the font in yellow with blue background) shows the attribute’s v.
3.2 Quick Start 3 Diagnostic Programs On the left column of the above screen, the detected hardware components are listed. The corresponding information of th e detected hardware components is displayed on the right of the screen. It displays the current running status information of the check program.
3 Diagnostic Programs 3.2 Quick Start 3.2.9 View Logs User can enter one choice to view a log file in the screen as follows. 3.2.10 Exit to Free DOS Select this item to exit to Free DOS. 3.2.11 The Diagn ostics Screen Explanation Below is an example of running a test item.
3.2 Quick Start 3 Diagnostic Programs 1. Diagnostics Windows When a test item is running, a Diagnostics Windows is displayed in full screen. It consists of the following parts: Title Bar, Test Running Status and Report Panel, Status Bar.
3 Diagnostic Programs 3.2 Quick Start CONTINUE ---- Contin ue the test; SKIP ---- Stop the sub-item of current test item to go to the next item ’s test; ABORT ----Stop the current test item to test the next m odule. ABORT ALL ---- Stop all the selected test ite ms.
3.2 Quick Start 3 Diagnostic Programs Satellit e/Satellite Pro L630/L 635 Maintenance Manual 15 Remaining Battery Capacity : Remaining Battery Capacity detected in the curren t Battery, e.g. ‘BAT: 46 %’; Test Order : Define the test sequence.
3 Diagnostic Programs 3.3Option 3.3 Options 3.3.1 Overview In Service Diagnostics, with the Options menu user can configure the batch parameters, test item’s param eters and t hose parameters created by the LOG file. Options Menu Notes: Select All/None Items Switch between selecting a ll test items and selecting none.
3.3 Option 3 Diagnostic Programs Satellit e/Satellite Pro L630/L 635 Maintenance Manual 17 Edit Batch Parameters Configure batch parameters and a ll the test item’s param eters . Load Batch Parameters Upload all the test items and the param eters to the *.
3 Diagnostic Programs 3.3Option Test Order Specify the order of the test items. C hoose 'Sequence' to adopt the sequential mode; choose 'Random' to run the test items in random sequence. Test Options Choose one of the following options: Wait On Error Wait for further confirmation while an error occurs.
3.3 Option 3 Diagnostic Programs Monitor CPU Thermal Monitor the CPU temperature. Test Mode LOOPBOUND The chosen test items will run repeated ly accord ing to the times specified in the 'Number of Loops'.
3 Diagnostic Programs 3.3Option Interactive If the item is enabled during the test, the te s t items that need user to response can run normally, such as PS2 Mouse te st; If it is disabled, those test item s will report FAIL. Whether the option here is enabled, it only affects the current test item.
3.3 Option 3 Diagnostic Programs In this window, you can specify the .INI files that you wanted to be edited or modified. 3.3.5 Save Batch Parameters Here you can save the edited or modified content to the batch parameters files.
3 Diagnostic Programs 3.3Option 22 Satellite /Satellite P ro L630/L6 35 Mainte nance Manu al If selecting 'NONE', no log file will be generated; if selecting 'FILE' , a log file with the name specified in 'Log File Name' will be generated.
3.3 Option 3 Diagnostic Programs The default viewing program of Service Diagnostics is LogView .exe. 3.3.8 Display LOG File You can specify the Log file for viewing in the Display Error Log File screen. In this screen, you can specify a Log file and view it with the viewer designated in Specify LOG Viewer.
3 Diagnostic Programs 3.3Option ↑ , ↓ Scroll a line backward or forward on the screen. Page Up, Page Down Scroll a page backward or forward on the screen. Esc Exit the Log viewer. F1 Display the Help information about the Log viewer operations and the functional keys.
3.3 Option 3 Diagnostic Programs Satellit e/Satellite Pro L630/L 635 Maintenance Manual 25 3.3.10 LOG File Sample Log file is a test result file, which record s the following information: Test module nam e, Test item name, Start/En d time and the test result (including PA SS, FAIL, SKIP and ABORT).
3 Diagnostic Programs 3.4 Subtests 26 Satellite /Satellite P ro L630/L6 35 Mainte nance Manu al 3.4 Subtests Test Group Sub Item ID Subtest Test ID Test items Internal Name System 01 CPU 01 Basic Func.
3.4 Subtests 3 Diagnostic Programs Satellit e/Satellite Pro L630/L 635 Maintenance Manual 27 11 Bus Noise [BusNoise ] 12 Memory Speed Test [MemSpeed] Storage 01 HDD 01 Sequential/Random R/W [SeqRdRW1].
3 Diagnostic Programs 3.4 Subtests 28 Satellite /Satellite P ro L630/L6 35 Mainte nance Manu al Memory 05 AGP Test [AGP] 06 LCD Panel Test [LCDPanel] 07 Register Test [Register] 08 Color Purity Test [.
3.5 System Test 3 Diagnostic Programs 3.5 System Test Move arrow keys and press the Space key to select CPU test item from Service Diagnostic menu, then highlight CPU and press the Enter to run this test item.
3 Diagnostic Programs 3.5 System Test CPU Speed Comparison --Whether you want to make a comparison of the CPU speed with the value set in ‘E xpected CPU Speed’, you should choose ‘Yes’; otherwise, ‘No’. Expected CPU Speed --Specify the expected CPU Speed value you want for further comparison.
3.5 System Test 3 Diagnostic Programs 5. CPU Protected Mode Test This test item is to check whether CPU protected m ode instruction works normally. 6. MMX The test item is to confirm whether the CPU supports MMX instru ctions. Subtest 02 Boards 1. DMA Controller This test item is to check whethe r the DMA controller works norm ally.
3 Diagnostic Programs 3.5 System Test This test item is to check: 1. Whether the current system supports Plug-n-Play; 2. Whether there is an ESCD (Extended System Configuration D ata) in the BIOS; 3. Whether there is PCI-to-ISA bridge in the system; 4.
3.5 System Test 3 Diagnostic Programs Satellit e/Satellite Pro L630/L 635 Maintenance Manual 33.
3 Diagnostic Programs 3.6 Memory Test 3.6 Memory Test This test module is to check whet her the m em ory chip works normally. Subtest 01 BIOS ROM This test item is to check the validity of BIOS ROM that in cludes two sub-items -- ROM Read and ROM Write Protection.
3.6 Memory Test 3 Diagnostic Programs Satellit e/Satellite Pro L630/L 635 Maintenance Manual 35 Extended Memory Start Address (MB) & Extended Memory End Address (MB): Set the range of extended memory that is to be tested, the test coverage would be based on the setting and the value in ‘Percent (%) mentioned at below.
3 Diagnostic Programs 3.6 Memory Test In addition to the above pattern test of th e memory, there is Read/Write Cycle test and Read Cycle Test for the extended memory. Below is the parameter dialog window of the extended pattern test. Test Range: Specify the test coverage range of Extended Memory.
3.6 Memory Test 3 Diagnostic Programs Test by using read instructions. Subtest 04 Walking 1’s Test The test item is to ensure that there is no short circuitry issue in mem ory chip. The parameter dialog window is the same as that in ‘Subtest 02 P attern’.
3 Diagnostic Programs 3.6 Memory Test 38 Satellite /Satellite P ro L630/L6 35 Mainte nance Manu al This test item is to check whether the memory could be correctly accessed with randomized memory address an d a series of increm ental data. Subtest 10 Data Bus Test This test item is to check whether the data bus works normally.
3.7 Storage 3 Diagnostic Programs 3.7 Storage Subtest 01 HDD This test item runs on IDE hard disks. It checks the functions and performance of IDE hard disk. In order to protect user’s HDD data, the password must be verified before the HDD test. The screen is as follows: Password ： hard disk 1.
3 Diagnostic Programs 3.7 Storage LBA Start, LBA End --Specify the start and end byte in LBA (Large Block Address). Percent —Specify the coverage rate in percentage of the total disk. Time Limit(h): Choose or Input the time (hour) of the defined range of the total disk to be tested.
3.7 Storage 3 Diagnostic Programs Option-- Select sequential test or rand om test; Percent-- Specify the coverage rate in percentage of the total disk.
3 Diagnostic Programs 3.7 Storage 42 Satellite /Satellite P ro L630/L6 35 Mainte nance Manu al Subtest 02 ODD The ODD test runs on ID E CDROM/DVD-ROM & CD-RW. It will check the ODD driver’s functionality and perf ormance. 1. Controller Test Check the CDROM controller’s status.
3.8 Video 3 Diagnostic Programs 3.8 Video This test item tests the video by: 1. displaying the figures in different graphic modes. 2. displaying the property and color of the characters in different text modes. User will confirm whether each video m ode works normally by judging whether the display is correct.
3 Diagnostic Programs 3.8 Video It would display the below texts of th e different attributes in the screen: 1. Text in normal attribute; 2. Text in blinking normal attribute; 3. Text in inverse attribute; 4. Text in blinking inverse attribute; 5. Text in hi-intensity attribute; 6.
3.8 Video 3 Diagnostic Programs 4. Text Color This test item is to check whether all 16 colors foreground and all 8 colors background works normally in VGA text mode.
3 Diagnostic Programs 3.8 Video In the test, user is required to respond according to the instru ction in the screen. Subtest 02 640 * 480 VGA Mode This test item is to check whethe r 680*480 VGA Text mode works normally. In the test, user is required to respond according to the instru ction in the screen.
3.8 Video 3 Diagnostic Programs Subtest 03 VESA Video Modes This test item is to check whether all the video modes supported by the video card works normally. In the test, user is required to respon d following the instruction in the screen. 1. 640X480 Video Modes Test 2.
3 Diagnostic Programs 3.8 Video If press Ctrl+Break to force the test to term inate during execution of VESA Video Memory, the test program will not operate and display properly in f urther tests. Subtest 05 AGP Test This test item is to report the system’s Accelerated Graphics Port status and check whether AGP registers works normally.
3.8 Video 3 Diagnostic Programs Subtest 07 Register Test This test item is to check whether th e registers of the video adapter works normally. Subtest 08 Color Purity Test This test item is to check whether th e sy stem (the video adapter and the display) could display the purity color of re d, green, blue, black and white.
3 Diagnostic Programs 3.8 Video Subtest 10 DAC/Palette Address This test item is to check the f unction of DAC registers and Palette registers. In the test, user is required to respond according to the instru ction in the screen.
3.8 Video 3 Diagnostic Programs Satellit e/Satellite Pro L630/L 635 Maintenance Manual 51 3.9 Communication (COMM) Subtest 01 LAN Card This test item is to check whether the m odule can detect the exis tence of the network card and display its related information.
3 Diagnostic Programs 3.10 Peripheral 3.10 Peripheral Subtest 01 Keyboard This test item is to check wh ether the keyboard works normally. 1. Keyboard Data Line Test Check whether the keyboard data line works normally. 2. Keyboard Clock Line Test Check whether the keyboard clock line works normally.
3.10 Peripheral 3 Diagnostic Programs Subtest 03 Led Test 1. Led Test NOTE 1: This Test can not support 3 in 1 LED Test Check whether the white led works normally.
3 Diagnostic Programs 3.10 Peripheral Check whether the orange led works normally. Check whether the HDD led works normally. 54 Satellite /Satellite P ro L630/L6 35 Mainte nance Manu al.
3.10 Peripheral 3 Diagnostic Programs Satellit e/Satellite Pro L630/L 635 Maintenance Manual 55.
3 Diagnostic Programs 3.11Error Codes and Description 56 Satellite /Satellite P ro L630/L6 35 Mainte nance Manu al 3.11 Error Codes and description The format of ‘Error Code’ is ‘ddxxee ’, and.
3.11Error Codes and Description 3 Diagnostic Programs Satellit e/Satellite Pro L630/L 635 Maintenance Manual 57 04 (XMS)Memory Problem The test pattern read out from the extension memory is different from the one that has been written in this address.
3 Diagnostic Programs 3.11Error Codes and Description 58 Satellite /Satellite P ro L630/L6 35 Mainte nance Manu al 17 PCI to ISA Bridge Error PCI-ISA bridge errors. Repeat multiple times. If there is always the same error, replace the board. 18 ESCD Error ESCD errors.
3.11Error Codes and Description 3 Diagnostic Programs Satellit e/Satellite Pro L630/L 635 Maintenance Manual 59 16 AGP Test Error AGP configuration register errors. Check and see whether the AGP video card has any physical problem. 17 LCD Panel Test Error Lower LCD color resolution.
3 Diagnostic Programs 3.11Error Codes and Description 60 Satellite /Satellite P ro L630/L6 35 Mainte nance Manu al 05xx Mouse 01 Touch Pad Test Fail Touch Pad Test Fail Check the mouse connection and repeat the test. 20xx IDE-HDD 01 Get Parameter Fail ! Wrong test parameters are input by user.
3.12 Quick Test Item List 3 Diagnostic Programs Satelli te/Satellite Pro L630/ L635 Main tenance Manu al i 3.12 Quick Test Item List Device Test Items Comment CPU Basic Functionality N PU Basic Functi.
Chapter 4 Replacement Procedures 4 1.
4 Replacement Procedures 4-ii Satellite/Satellite Pro/L630/L635 Maintenance Manual.
4 Replacement Procedures Satellite/Satellite Pro/L630/L635 Maintenance Manual 4-iii Chapter 4 Contents 4.1 General ......................................................................... Error! Bookmark not defined. Safety Precautions ..............
4 Replacement Procedures 4-iv Satellite/Satellite Pro/L630/L635 Maintenance Manual Assembling the ODD Bezel ................................... Error! Bookmark not defined. Disassembling the ODD Drive .............................. Error! Bookmark not defined.
4 Replacement Procedures Satellite/Satellite Pro/L630/L635 Maintenance Manual 4-v Removing the CCD Board and MIC ...................... Error! Bookmark not defined. Installing the CCD Board and MIC ....................... Error! Bookmark not defined. 4.
4 Replacement Procedures 4-iv Satellite/Satellite Pro/L630/L635 Maintenance Manual Figures Figure 4-1 Removing the battery pack .................................... Error! Bookmark not defined. Figure 4-2 Removing the Bridge Media ....................
4 Replacement Procedures Satellite/Satellite Pro/L630/L635 Maintenance Manual 4-vii.
4.1 General 4 Replacement Procedures 4 1 4.1 General This chapter explains how to disassemble the computer and replace Field Replaceable Units (FRUs). Some replacement procedures m ay not require you to remove all the surrounding FRUs to replace only one FRU.
4 Replacement Procedures 4.1 General 4-2 Satellite/Satellite Pro/L630/L635 Maintenance Manual Safety Precautions Before you begin to disassembly read the following safety precautions carefully. Be sure to follow them while you are working. DANGER: 1. Always use the genuine batteries or replacement batteries authorized by Toshiba.
4.1 General 4 Replacement Procedures Satellite/Satellite Pro/L630/L635 Maintenance Manual 4-3 CAUTION: 1. Before replacing a component, make su re that the replacement component meets the required specifications. To avoid computer failures, never use components that do not meet the specifications.
4 Replacement Procedures 4.1 General 4-4 Satellite/Satellite Pro/L630/L635 Maintenance Manual Before You Begin Before you begin to disassembly the computer, keep in m ind the precautions and advice in this section. Always begin disassembly by removing the AC adapter and battery pack.
4.1 General 4 Replacement Procedures Satellite/Satellite Pro/L630/L635 Maintenance Manual 4-5 Disassembly Procedures The cable connectors come in these two basic types: Pressure plate connectors .
4 Replacement Procedures 4.1 General 4-6 Satellite/Satellite Pro/L630/L635 Maintenance Manual Tools and Equipment For your safety and that of other people in the working environment, it is strongly recommended that you use electrostatic discharge (ESD) equipm ent.
4.1 General 4 Replacement Procedures Satellite/Satellite Pro/L630/L635 Maintenance Manual 4-7 Colors of Screw Shanks For easy identification of the correct screws, the screw shanks are colored accordi.
4 Replacement Procedures 4.2 Battery Pack/Bridge Media 4.2 Battery Pack/Bridge Media 4.2.1 Battery Pack Removing the Battery Pack Remove the battery pack according to the following procedures and Figure 4-1. CAUTION: When handling the battery packs, use care not to short circuit the terminals.
4.2 Battery Pack/Bridge Media 4 Replacement Procedures Satellite/Satellite Pro/L630/L635 Maintenance Manual 4-9 Installing the Battery Pack Install the battery pack according to the following procedures and Figure 4-1.
4 Replacement Procedures 4.2 Battery Pack/Bridge Media 4.2.2 Bridge Media Removing the Bridge Media Remove the Bridge Media according to the following procedures and Figure 4-2, after checking that the computer is turned off in boot mode. 1. Push a Bridge media.
4.3 Memory Module 4 Replacement Procedures 4.3 Memory Module Removing the Memory Module Remove the mem ory module according to the following procedures and Figures 4-3, after checking that the computer is turned off in boot mode. CAUTION: Remove the optional memory after turning off the computer.
4 Replacement Procedures 4.3 Memory Module 4-12 Satellite/Satellite Pro/L630/L635 Maintenance Manual Installing the Memory Module Install the memory m odule according to the following procedures and Figures 4-3, after checking that the computer is turned off in boot mode.
4.4 HDD 4 Replacement Procedures 4.4 HDD Removing the HDD Satellite/Satellite Pro/L630/L635 Maintenance Manual 4-13 CAUTION: Do not press on the top or bottom of the drive. Applying such pressure can either corrupt the data in the drive or damage the drive.
4 Replacement Procedures 4.4 HDD NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or replace the HDD pack only if it fails. 3. Place the HDD pack on a flat surface (such as a desk), and remove the four M3x3.5 black flat head screws.
4.4 HDD 4 Replacement Procedures Installing the HDD Install the HDD according to the following procedures and Figures 4-4, 4-5. CAUTION: To avoid damage, always hold the HDD only by its sides. 1. Attach the HDD chassis. 2. Secure the HDD and its chassis with the four M3x3.
4 Replacement Procedures 4.5 ODD Bay Module 4.5 ODD Bay Module Removing the ODD Bay Module NOTE: The installation and removal procedures are the same for all the modules that can be installed in the ODD bay. See the appropriate sections for the disassembly procedures of specific modules.
4.5 ODD Bay Module 4 Replacement Procedures Satellite/Satellite Pro/L630/L635 Maintenance Manual 4-17 Installing the ODD Bay Module Install the ODD bay module according to the following procedures and Figures 4-6. 1. Place the ODD bay module in the correct position and slide it in.
4 Replacement Procedures 4.5 ODD Bay Module Disassembling the ODD Bezel Disassemble the ODD drive according to the following procedures and Figure 4-7.
4.5 ODD Bay Module 4 Replacement Procedures Disassembling the ODD Drive NOTE: Do not disassemble the ODD drive when it is working normally. Disassemble or replace the ODD drive only if it fails. Disassemble the ODD drive according to the following procedures and Figure 4-8.
4 Replacement Procedures 4.6 Keyboard 4.6 Key board Removing Keyboard Remove the Keyboard according to the following procedures and Figure 4-9. 1. Release the following 11 latches on the keyboard cover, in that order: - One latch on right side and one latch on left sides.
4.6 Keyboard 4 Replacement Procedures Satellite/Satellite Pro/L630/L635 Maintenance Manual 4-21 Installing the Keyboard Install the keyboard according to the following procedures and Figure 4-9. 1. Connect the keyboard cable to CN250 on the system board.
4 Replacement Procedures 4.7 Wireless LAN card 4.7 Wireless LAN Card Removing the Wireless LAN Card Remove the wireless LAN card according to the following procedures and Figure 4-10. CAUTION : Do not touch the connectors on the wireless LAN card and in the computer with your bare hands.
4.7 Wireless LAN Card 4 Replacement Procedures Satellite/Satellite Pro/L630/L635 Maintenance Manual 4-23 Installing the Wireless LAN Card Install the wireless LAN card according to the following procedures and Figure 4-10. 1. Insert the wireless LAN card into the CN1300 an angle of 45 degrees.
4 Replacement Procedures 4.8 Top Cover 4.8 Top Cover Removing the Top Cover Remove the top cover according to the following procedures and Figures 4-11 and 4-12. Turn the computer upside down and remove the following 18 screws: - Twelve M2.5x6 black flat head screws.
4.8 Top Cover 4 Replacement Procedures M2 5x 6 b l ac k f l at head screw . Spea k er cab l e Power board cab l e T ouch pad board f l at cab l e C N6 00 C N 201 C N 2 8 0 T op cover Figure 4-12 Remov.
4 Replacement Procedures 4.9 Display Assembly 4.9 Display Assembly Removing the Display Assembly CAUTION: Use care to avoid that the antenna cable is not caught between the display assembly and computer. Remove the display assembly according to the following procedures and Figures 4-1 3 .
4.9 Display Assembly 4 Replacement Procedures Satellite/Satellite Pro/L630/L635 Maintenance Manual 4-27 Installing the Display Assembly Install the display assembly according to the following procedures and Figures 4-13. 1. Place the display panel in the correct position and push the wireless antenna cable into the bottom cover.
4 Replacement Procedures 4.10 System board 4.10 System Board Removing the System Board NOTE: Be careful of the eject button for the PC card. It can be damaged when removing the board. Make sure it is securely installed. Remove the System Board according to the following procedures and Figure 4-14.
4. 10 System board 4 Replacement Procedures Satellite/Satellite Pro/L630/L635 Maintenance Manual 4- - 29 Installing the System Board Install the System Board according to the following procedures and figure 4-14. NOTE: Be careful of the eject button for the PC card.
4 Replacement Procedures 4.11 Thermal module 4.11 Thermal module CAUTION: When removing the cooling module, keep the following in mind: The cooling module can become very hot during operation. Be sure to let it cool down before starting the repair work.
4.11 Thermal module 4 Replacement Procedures Satellite/Satellite Pro/L630/L635 Maintenance Manual 4- - 31 Installing the thermal module (for VGA Model) Install the thermal Module according to the following procedures and Figures 4-15 and 4- 16. CAUTION: When installing the cooling module, keep the following in mind: 1.
4 Replacement Procedures 4.11 Thermal module Removing the thermal Module CAUTION: When removing the cooling module, keep the following in mind: The cooling module can become very hot during operation. Be sure to let it cool down before starting the repair work.
4.11 Thermal module 4 Replacement Procedures Satellite/Satellite Pro/L630/L635 Maintenance Manual 4- - 33 Installing the thermal Module Install the thermal Module according to the following procedures and Figures 4-17, 4-18. CAUTION: When installing the cooling module, keep the following in mind: 1.
4 Replacement Procedures 4.12 CPU 4.12 CPU Removing the CPU Remove the CPU according to the following procedures and Figures 4-19, 4-20, 4-21 and 4-22. CAUTION: When removing the CPU, keep the following in mind: The CPU can become very hot during operation.
4.12 CPU 4 Replacement Procedures Installing the CPU Install the CPU according to the following procedures and Figures 4-19, 4-20, 4-21 and 4-22. 1. Check that the triangle on the cam is in the unlock position. 2. Attach the CPU to the correct position in the CPU socket.
4 Replacement Procedures 4.12 CPU 3. Secure the CPU by rotating the cam 120 degrees to the right with a flat-blade screwdriver. NOTE: FOXCONN CPU socket will be 180 degrees to the left.
4.13 Display Mask 4 Replacement Procedures 4.13 Display Mask Removing the Display Mask Disassemble the Display mask according to the following procedures and Figure 4-23. 1. Peel off four seal tapes and remove four M2.5x5 black flat head screws securing the display mask.
4 Replacement Procedures 4.15 Display Mask 4- - 38 Satellite/Satellite Pro/L630/L635 Maintenance Manual Installing the Display Mask Install the display mask according to the following procedures and Figure 4-23. 1. Install the display mask and lock the latches.
4.14 LED Module 4 Replacement Procedures Satellite/Satellite Pro/L630/L635 Maintenance Manual 4-39 4.14 LED Module NOTE: ICs are fragile. Use extreme care not to apply pressure to the ICs along the edges of the LED module . NOTE: Dispose of used LED panels (fluorescent (FL) tubes) as required by local ordinances or regulations .
4 Replacement Procedures 4.14 LED Module M2 6x6 black flat head screw . M2x2 5 black flat head screw . M2x2 5 black flat head screw . Left LED bracket Right LED bracket Figure 4-24 Removing the LED mo.
4.16 LED Module (LED panel) 4 Replacement Procedures Installing the LED Module NOTE: LCD/FL cable must be carefully peeled away before disconnecting it from the module. Install the LED module according to the following procedures and Figures 4-24, 4- 25 .
4 Replacement Procedures 4.17 CCD board and MIC 4.15 CCD Board and MIC Removing the CCD Board and MIC Remove the CCD board and MIC according to the following procedures and Figure 4-26. 1. Remove the CCD and MIC module from display rear cover. CCD and MIC module Figure 4-26 Removing the CCD board and MIC 2.
4.16 Power button board 4 Replacement Procedures 4.16 Power Button Board Removing the Power Button Board Remove the Power Button Board according to the following procedures and Figures 4-27. 1. Remove two M2x2.5 black flat head screws. 2. Remove the Power button board.
4 Replacement Procedures 4.16 Power button board 4- - 44 Satellite/Satellite Pro/L630/L635 Maintenance M anual Install the Power Button Board Install the Power Button Board and Switch Board according to the following procedures and Figures 4-27. 1. Seat the Power button board in the correct position.
4 . 17 Speakers 4 Replacement Procedure s 4.17 Speakers Removing the Speakers Remove the Speakers according to the following procedures and Figure 4-28. 1. Remove two M2x3 black flat head step screw securing the left speaker. 2. Remove two M2x3 black flat head step screws securing the right speaker.
4 Replacement Procedures 4.17 Speakers 4- - 46 Satellite/Satellite Pro/L630/L635 Maintenance M anual Installing the Speakers Install the speakers according to the following procedures and Figure 4-28. 1. Seat the left and right speaker in the correct position.
4.18 Switch board and button board 4 Replacement Procedure s 4.18 Switch board and Button board Removing the Switch board and Button board Remove the Switch board and Button board according to the following procedures and Figure 4-29. 1. Disconnect the switch board cable 2.
4 Replacement Procedures 4.18 Switch board and button board 4- - 48 Satellite/Satellite Pro/L630/L635 Maintenance Manual Installing the Switch board and Button board Install the button board according to the following procedures and Figure 4-29. 1. Seat the button board bracket in the correct position.
4.19 DC IN cable, card reader board and Bluetooth card 4 Replacement Procedure s 4.19 DC IN cable, Card reader board and Bluetooth Card Removing the DC IN cable, Card reader board and Bluetooth Card Remove the DC IN cable, Card reader board and Bluetooth Card according to the following procedures and Figures 4-30.
4 Replacement Procedures 4.19 DC IN cable, card reader board and Bluetooth card 4- - 50 Satellite/Satellite Pro/L630/L635 Maintenance Manual Installing the DC IN cable, Card reader board and Bluetooth Card Install the DC IN cable, Card reader board and Bluetooth Card according to the following procedures and Figure 4-30.
6000 1 次 Appendices.
Appendices App-ii Satellite/Satellite Pro/L630/L635 Ma intenance Manual Appendix Contents Appendix A Handling the LCD Module .......................................................................... A-1 Appendix B Board Layout .......................
Apx. A Handling the LCD Module Appendices Appendix A Appendix A Handling the LCD Module Precautions for handling the LCD module The LCD module can be easily damaged during assem bly or disassembly. Observe the following precautions when handling the LCD module: 1.
Appendices Apx. A Handling the LCD Module 3. If the panel’s surface gets dirty, wipe it with cotton or a soft cloth. If it is still dirty, try breathing on the surface to create a light condensate and wipe it again. If the surface is very dirty, we recommend a CRT cleaning agent.
Apx. A Handling the LCD Module Appendices 5. Glass is used in the panel, so be careful not to drop it or let it strike a hard object, which could cause breakage or cracks. 6. CMOS-LSI circuits are used in the module, so guard against damage from electrostatic discharge.
Appendices Apx. A Handling the LCD Module 7. Do not expose the module to direct sunlight or strong ultraviolet rays for long periods. 8. Do not store the module at temperatures below specifications. Cold can cause the liquid crystals to freeze, lose their elasticity or otherwise suffer damage.
Apx. A Handling the LCD Module Appendices 9. Do not disassemble the LCD module. Disassem bly can cause malfunctions. 10. If you transport the module, do not use pack ing m aterial that contains epoxy resin (amine) or silicon glue (alcohol or oxide). These materials can release gas that can damage the panel’s polarization.
Apx. B Board Layout Appendices Appendix B Appendix B Board Layout B.1 System Board Front View Figure B-1 Board Layout (Front) Satellite/Satellite Pro/L630/L635 Maintenance Manual B-1.
Appendices Apx. B Board Layout B.2 System Board Back View Figure B-2 Board Layout (Back) B-2 Satellite/Satellite Pro/L630/L635 Maintenance Manual.
Apx. C Keyboard Scan/Character Codes Appendices Satellite/Satellite Pro/L630/L635 Maintenance Manual C-1 Apx. C Keyboard Scan/Character Codes Appendix C Keyboard Scan/Character Codes Table C-1 Scan Codes (set 1 and set 2) (1/4) Code set 1 Code set 2 Cap No.
Appendices Apx. C Keyboard Scan/Character Codes C-2 Satellite/Satellite Pro/L630/L635 Maintenan ce Manual Table C-1 Scan Codes (set 1 and set 2) (2/4) Code set 1 Code set 2 Cap No.
Apx. C Keyboard Scan/Character Codes Appendices Satellite/Satellite Pro/L630/L635 Maintenance Manual C-3 Table C-1 Scan Codes (set 1 and set 2) (3/4) Code set 1 Code set 2 Cap No.
Appendices Apx. C Keyboard Scan/Character Codes C-4 Satellite/Satellite Pro/L630/L635 Maintenan ce Manual Table C-1 Scan Codes (set 1 and set 2) (4/4) Cap Code set 1 Code set 2 No.
Apx. C Keyboard Scan/Character Codes Appendices Satellite/Satellite Pro/L630/L635 Maintenance Manual C-5 Table C-2 Scan Codes with left Shift key Code set 1 Code set 2 Cap No.
Appendices Apx. C Keyboard Scan/Character Codes C-6 Satellite/Satellite Pro/L630/L635 Maintenan ce Manual Table C-3 Scan Codes in Numlock mode Code set 1 Code set 2 Cap No.
Apx. C Keyboard Scan/Character Codes Appendices Satellite/Satellite Pro/L630/L635 Maintenance Manual C-7 Table C-5 Scan Codes in overlay mode Code set 1 Code set 2 Cap No.
Appendices Apx. C Keyboard Scan/Character Codes C-8 Satellite/Satellite Pro/L630/L635 Maintenan ce Manual Table C-7 No.126 key scan code Code set 1 Code set 2 Key top Shift Make Make Pause C omm on * E1 1D 45 E1 9D C5 E1 14 77 E1 F0 14 F0 77 Ctrl* E0 46 E0 C6 E0 7E E0 F0 7E *: This key generates only make codes.
Apx. D Key Layout Appendices Apx. D Key Layout Appendix E Key Layout D.1 United States (US) Keyboard Figure D-1 US keyboard D.2 Taiwan (TW) Keyboard Figure D-2 TW keyboard Satellite/Satellite Pro/L630.
Appendices Apx. D Key Layout D.3 Thai (TH) Keyboard Figure D-3 TH keyboard D.4 Russian (RU) Keyboard Figure D-4 RU keyboard D-2 Satellite/Satellite Pro /L630/L635 Maintenance Manual.
Apx. D Key Layout Appendices D.5 Hebrew (HE) Keyboard Figure D-5 HE keyboard D.6 Korean (KR) Keyboard Figure D-6 KR keyboard Satellite/Satellite Pro/L630/L635 Maintenance Manual D-3.
Appendices Apx. D Key Layout D.7 UK-English (UK) Keyboard Figure D-7 UK keyboard D.8 DU, UE, US International (USE) Keyboard Figure D-8 USE keyboard D-4 Satellite/Satellite Pro /L630/L635 Maintenance .
Apx. D Key Layout Appendices D.9 Danish (DK) Keyboard Figure D-9 DK keyboard D.10 Swiss/Switzerland (SL) Key board Figure D-10 SL keyboard Satellite/Satellite Pro/L630/L635 Maintenance Manual D-5.
Appendices Apx. D Key Layout D.11 Arabic (AR) Keyboard Figure D-11 AR keyboard D.12 Czech (CZ) Keyboard Figure D-12 CZ keyboard D-6 Satellite/Satellite Pro /L630/L635 Maintenance Manual.
Apx. D Key Layout Appendices D.13 Portuguese (PT) Keyboard Figure D-13 PT keyboard D.14 Slovakian (SK) Keyboard Figure D-14 SK keyboard Satellite/Satellite Pro/L630/L635 Maintenance Manual D-7.
Appendices Apx. D Key Layout D.15 Italian (IT) Keyboard Figure D-15 IT keyboard D.16 French (FR) Keyboard Figure D-16 FR keyboard D-8 Satellite/Satellite Pro /L630/L635 Maintenance Manual.
Apx. D Key Layout Appendices D.17 German (GR) Keyboard Figure D-17 GR keyboard D.18 Greek (GK) Keyboard Figure D-18 GK keyboard Satellite/Satellite Pro/L630/L635 Maintenance Manual D-9.
Appendices Apx. E Key Layout D.19 Hungary (HU) Keyboard Figure D-19 HU keyboard D.20 Spanish (SP) Keyboard Figure D-20 SP keyboard D-10 Satellite/Satellite Pro/L63 0/L635 Maintenance Manual.
Apx. E Key Layout Appendices D.21 Turkey (TR) Keyboard Figure D-21 TR keyboard D.22 Turkish F (TF) Keyboard Figure D-22 TF keyboard Satellite/Satellite Pro/L630/L635 Maintenance Manual D-11.
Appendices Apx. E Key Layout D.23 Swedish (SW) Keyboard Figure D-23 SW keyboard D.24 Belgian (BE) Keyboard Figure D-24 BE keyboard D-12 Satellite/Satellite Pro/L63 0/L635 Maintenance Manual.
Apx. E Key Layout Appendices D.25 Yugoslavia (YU) Keyboard Figure D-25 YU keyboard D.26 Norwegian (NO) Keyboard Figure D-26 NO keyboard Satellite/Satellite Pro/L630/L635 Maintenance Manual D-13.
Appendices Apx. E Key Layout D.27 Scandinavian (N5) Keyboard Figure D-27 N5 keyboard D.28 Canadian Bilingual (CB) Keyboard Figure D-28 CB keyboard D-14 Satellite/Satellite Pro/L63 0/L635 Maintenance M.
Apx. E Key Layout Appendices D.29 Romania (RO) Keyboard Figure D-29 RO keyboard D.30 Bulgaria (BU) Keyboard Figure D-30 BU keyboard Satellite/Satellite Pro/L630/L635 Maintenance Manual D-15.
Appendices Apx. E Key Layout D.31 Japan (JP) Keyboard Figure D-31 JP keyboard D-16 Satellite/Satellite Pro/L63 0/L635 Maintenance Manual.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Toshiba L635 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Toshiba L635 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Toshiba L635, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Toshiba L635 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Toshiba L635, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Toshiba L635.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Toshiba L635. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Toshiba L635 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
