Manuel d'utilisation / d'entretien du produit L30 du fabricant Toshiba
Aller à la page of 165
Choose freedom. computers.toshiba-europe.com Choose freedom. computers.toshiba-europe.com L30 GMR300624EN0 GMR300624EN0 User ’ s Manual.
User ’s Manual ii TOSHIBA Satellite L30 / Satellite Pro L30 Series Copyright © 2006 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA.
User ’s Manual iii TOSHIBA Satellite L30 / Satellite Pro L30 Series T rademarks Intel, Centrino, Intel C ore and Celeron a re trademarks or registered trademarks of Intel Corporation. Windows ® and Microsof t are registered tradem arks of Microsoft Corpor ation.
User ’s Manual iv TOSHIBA Satellite L30 / Satellite Pro L30 Series Network C omp atibility St atement This product is designed to work with, and is compatible with the following networks. It has been tested to and found to conform with the add itional requirements conditional in EG 201 121.
User ’s Manual v TOSHIBA Satellite L30 / Satellite Pro L30 Series TEAC CD-ROM Drive CD-224E ■ The CD-ROM drive employs a laser system. T o ensure prope r use of this product, please read th is instruction manual carefully and retain for future reference.
User ’s Manual vi TOSHIBA Satellite L30 / Satellite Pro L30 Series TEAC CD-RW/DVD-ROM Drive DW - 224E ■ The CD-RW/DVD-ROM drive empl oys a las er system. T o ensure proper use of this prod uct, please read this in struction manual carefully and retain for future reference.
User ’s Manual vii TOSHIBA Satellite L30 / Satellite Pro L30 Series Hit achi-LG Dat a Storag e, Inc. CD-RW/DVD-ROM Drive GCC-4244 ■ The CD-RW/DVD-ROM drive empl oys a las er system. T o ensure proper use of this prod uct, please read this in struction manual carefully and retain for future reference.
User ’s Manual viii TOSHIBA Satellite L30 / Satellite Pro L30 Series TOSHIBA SAMSUNG ST ORAGE TECHNOLOGY CD-RW /DVD-ROM Drive TS-L462C ■ The CD-RW/DVD-ROM drive empl oys a las er system. T o ensure proper use of this prod uct, please read this in struction manual carefully and retain for future reference.
User ’s Manual ix TOSHIBA Satellite L30 / Satellite Pro L30 Series Panasonic CD-RW /DVD-ROM Drive UJDA770T ■ The CD-RW/DVD-ROM drive empl oys a las er system. T o ensure proper use of this prod uct, please read this in struction manual carefully and retain for future reference.
User ’s Manual x TOSHIBA Satellite L30 / Satellite Pro L30 Series Panasonic DVD Super Multi UJ-850 ■ The DVD Super Multi dr ive employs a laser system. T o ensure proper use of this p roduct, please read thi s instruction manual care fully and retain for future refere nce.
User ’s Manual xi TOSHIBA Satellite L30 / Satellite Pro L30 Series HLDS DVD Super Multi GMA-4082N ■ The DVD Super Multi dr ive employs a laser system. T o ensure proper use of this p roduct, please read thi s instruction manual care fully and retain for future refere nce.
User ’s Manual xii TOSHIBA Satellite L30 / Satellite Pro L30 Series HLDS DVD Super Multi GSA-T10N ■ The DVD Super Multi dr ive employs a laser system. T o ensure proper use of this p roduct, please read thi s instruction manual care fully and retain for future refere nce.
User ’s Manual xiii TOSHIBA Satellite L30 / Satellite Pro L30 Series Pioneer DVD Super Multi DVR-K16T ■ The DVD Super Multi dr ive employs a laser system. T o ensure proper use of this p roduct, please read thi s instruction manual care fully and retain for future refere nce.
User ’s Manual xiv TOSHIBA Satellite L30 / Satellite Pro L30 Series International precautions CAUTION: This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT". T o use this mode l properly , read the instruction manual carefully and keep thi s manual for your future referenc e.
User ’s Manual xv TOSHIBA Satellite L30 / Satellite Pro L30 Series OBS! Apparaten innehåller laserkomponent som avger laserstråining överstigande gränsen för laserklass 1. V AROITUS. Suojakoteloa si saa avata. Laite sisältää laserdiodin, joka lähetää näkymätöntä silmilie vaarallist a lasersäteilyä.
User ’s Manual xvi General Precautions TOSHIBA computers are designed to optimize safety , minimize strain and withstand the rigours of portability . However , certain precautions should be observed to further reduce the risk of personal injury or damag e to the computer .
User ’s Manual xvii TOSHIBA Satellite L30/ Satellite Pro L30 Series Pressure or imp act damage Do not apply heavy pressure to the computer or subject it to strong impact. Excessive pressure or impact can cause damage to computer components or otherwise caus e malfunction s.
User ’s Manual xviii TOSHIBA Satellite L30/ Satellite Pro L30 Series CE com pliance This product is labelled with the CE Mark in accordance with the related European Directives, notably Electromagne.
User ’s Manual xix TOSHIBA Satellite L30/ Satellite Pro L30 Series Therefore TOSHIBA strongly reco mmend that the electromagnetic compatibility of this product should be suitably tested in all non-approved working environments before use.
User ’s Manual xx TOSHIBA Satellite L30/ Satellite Pro L30 Series Limitation of Liability For damage occurring due to an earthquake or thunder, fire beyond our responsibility , action by third party , ot her accid ent, intentional or accidental mistakes by a user , misuse, use under abnormal cond itions, we do not take any responsibility .
User ’s Manual xxi TOSHIBA Satellite L30/ Satellite Pro L30 Series W ARNING NOTE T urn OFF the Wireless Communication switch of Wireless Products in a congested place, such as a crowded commuter train. Keep this product away from a cardiac pacemaker at least 22cm.
User ’s Manual xxii T able of Content s Chapter 1 Introduction Equipment ch ecklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User ’s Manual xxiii TOSHIBA Satellite L30 / Satellite Pro L30 Series Chapter 4 Operating Basics Using the T ouch Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Using the optical media dri ve . . . . . . . . . . . .
User ’s Manual xxiv TOSHIBA Satellite L30 / Satellite Pro L30 Series Chapter 8 Optional Devices PC card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1 Memory expansio n . . . . . . . . . . . . . .
User ’s Manual xxv Preface Congratulations on your purchase of the L3 0 computer . This powerful notebook computer provides excelle nt expansion capability , in cluding multimedia devices, and it is designed to provide years of reliabl e, high- performance computing.
User ’s Manual xxvi TOSHIBA Satellite L30/ Satellite Pro L30Series Chapter 4, Operating Ba sics , includes instructions on using the fo llowing devices: T ouch Pad, Sound System, opt ical media drive, mo dem, wireless communication and LAN. It also provides tips on care of the computer .
User ’s Manual xxvii TOSHIBA Satellite L30/ Satellite Pro L30Series Display Messages Messages are used in this manual to bring important information to your attention.
User ’s Manual 1-1 Chapter 1 Introduction This chapter provides an equipment checkli st, and it identifies the computer's features, options and accessori es. Equipment checklist Carefully unpack your computer . Save the box an d packing materials for future use.
User ’s Manual 1-2 Introduction ■ Wireless LAN driver (Can be used only with Wireless LAN models) ■ Sound driver for Windows ® ■ DVD Video Player* ■ LAN driver ■ Pointing device driver .
User ’s Manual 1-3 Introduction Memory Power Disks Main Memory Disclaimer Part of the main system memory may be used by the graphics system fo r graphics performance and therefore reduce the amount of main system memory available for other computing activities.
User ’s Manual 1-4 Introduction Computers in this series can be configured with a fixed optical media drive. The avail able optical media driv es are described below . DVD-ROM & CD-R/RW Drive Some models are equip ped with a full -size, DVD-ROM & CD-R/RW drive module that lets you run CD/DVDs without using an adaptor .
User ’s Manual 1-5 Introduction Display The computer's LCD panel su pports high-resolution video graphics. The screen can be set at a wide range of viewing angles for maxi mum comfort and readability .
User ’s Manual 1-6 Introduction Slots Multimedia Communications Universal Serial Bus (USB 2.0) The computer has two Universal Serial Bus ports that comply with the USB 2.0 standard, which enables da ta tran sfer speeds 40 times faster than the USB 1.
User ’s Manual 1-7 Introduction Software Sp ecial features The following features are eithe r un ique to TOSHIBA computers or are advanced features, which make the co mputer more convenient to use. Wire les s LAN The Wireless LAN feature is not availab le on all models.
User ’s Manual 1-8 Introduction Hot Keys Key combinations let you quickly modify the system configuration dire ctly from the keyboard without running a system configuration program.
User ’s Manual 1-9 Introduction Intelligent Power Supply A microprocessor in the computer's intelligent power supply detects the battery’s charge and calculates the remaining battery capacity . It also protects electronic components from abnormal conditions, such as voltage overload from an AC adaptor .
User ’s Manual 1-10 Introduction Utilities This section describes pre-installed utilities and tells how to start them. For details on operations, refer to each utility’s online manual, help files or readme.txt files. Hibernation This feat ure let s you tu rn off the power without exiting from your software.
User ’s Manual 1-1 1 Introduction TOSHIB A Zooming Utility (Depends on the model yo u purchased.) This utility allows you to enlarge or reduce the icon size on the de sktop or the appl ication window .
User ’s Manual 1-12 Introduction Options Y ou can add a number of options to make your computer even more powerful and convenient to use. Refer to Chapter 8 Optional Devices , for details. The following opti ons are available: TOSHIB A T ouch and Launch ( Depends on the model yo u purchased.
User ’s Manual 2-1 Chapter 2 The Grand T our This chapter identifies the vari ous components of your computer . Become familiar with each component before you ope rate the computer . Front with the display closed The following figure shows the computer's front with its display panel in the closed positi on.
User ’s Manual 2-2 The Grand T our Lef t side The following figure shows the comp uter's left side. The left side of the computer Battery The Battery indicator shows the cond ition of the battery's charge: Green i ndicates a full charge, orange indicates that the battery is charging and flashing orange indicates a low battery ch arge.
User ’s Manual 2-3 The Grand T our External Mo nitor Port This 15-pin port lets you connect an external video display . The Analog VGA port suppo rts VESA DDC2B compatible functions. (Depends on the model you purchased.) Cooling V ent s Cooling vents help prevent the CPU from overheating.
User ’s Manual 2-4 The Grand T our Right side The following figure shows the comp uter's right side. The right side of the computer Backside The following figure shows the computer's back panel.
User ’s Manual 2-5 The Grand T our Underside The following figure shows the undersi de of the computer . Make sure the display is closed before turning over your computer . The underside of the computer Universal Serial Bus (USB 2.0) port The Universal Serial Bus p ort complies with the USB 2.
User ’s Manual 2-6 The Grand T our Front with the display op en This section shows the front of the co mputer with the display open. Re fer to the appropriate illustration fo r details. T o open the display , slide the display latch on the front of the display and lift up.
User ’s Manual 2-7 The Grand T our Optical media drive One of the following o ptical media drives is installed in the computer , either a CD-ROM drive or DVD-ROM&CD-R/RW drive or a DVD Super Multi drive. An A T API interfa ce controlle r is used for CD/DVD operation.
User ’s Manual 2-8 The Grand T our CDs ■ CD-R discs can be written only once. The recorded data cannot be erased or changed. ■ CD-RW discs can be recorded more th an once. Use either 1, 2, or 4 multi speed CD-RW discs or high-s peed 4- to 10-s peed discs.
User ’s Manual 2-9 The Grand T our DVD Super Multi drive (Su pporting DVD±R Double Layer) The full-size DVD Super Multi drive module lets you record da ta to writable CD/DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor .
User ’s Manual 2-10 The Grand T our ■ Use only the AC adaptor that came wi th the computer or an equivalent optional adaptor . Use of the wr ong adaptor could damage your computer . TOSHIBA assumes no liability for any damage in such case. ■ Use only the AC Adaptor supplied with your computer or an equ ivalent adapter that is compatible.
User ’s Manual 3-1 Chapter 3 Getting S t arted This chapter provides basic information to get you started using your computer . It covers the following topics: ■ Setting up your work space - for y.
User ’s Manual 3-2 Getting S tarted Setting up your work sp ace Establishing a comfortable work site is import ant for you and your computer . A poor work environment or stressful wo rk habits can result in discomfort or serious inju ry from repetit ive strain to your hands, wrists or other joints.
User ’s Manual 3-3 Getting S tarted Placement o f the computer Position the computer and pe ripheral devices to p rovide comfort and safety . ■ Set the computer on a flat surface at a comfortable height and d istance. ■ The display should be no higher than eye level to avoid eyestrain.
User ’s Manual 3-4 Getting S tarted Lighting Proper lighting can improve leg ibility of the d isplay and reduce eyestrain. ■ Position the co mputer so that sunli ght or bright ind oor lighting does not reflect off the screen. Use tinted Windows, shades or other screen to eliminate sun glare.
User ’s Manual 3-5 Getting S tarted Inst alling the battery p ack T o install a battery , follow th e steps below . 1. Tu rn the computer's power off. 2. Disconnect all cab les connected to the computer . 3. Insert the battery pack. The Battery Release Latch (2) clicks into pl ace.
User ’s Manual 3-6 Getting S tarted Connecting the AC adaptor Attach the AC adaptor when you need to cha rge the battery or you want to operate from AC power . It is also th e fastest way to get started, because the battery pack will need to be charged before you can operate from battery power .
User ’s Manual 3-7 Getting S tarted 2. Connect the AC adap tor's DC output plug to the DC IN 19V jack on the back of the computer . Connecting the adaptor to the computer 3. Plug the power cord into a live wall outlet. Opening the display The display panel can be rotated in a wide range of angles for optimal viewing.
User ’s Manual 3-8 Getting S tarted T urning on the power This section describes how to turn on the power . Press and hold the computer's power butto n for two or three seconds.
User ’s Manual 3-9 Getting S tarted T urning off the power The power can be turned off in one of the following modes: Shut down (Boot), Hibernation or S tandby Mode. Shut Down mode (Boot mode) When you turn off the power in Shut Down mode no data is saved and the computer will boot to the operating syst em’s main screen.
User ’s Manual 3-10 Getting S tarted Benefits of Hibernation Mode The Hiberna tion Mode feat ure provides the following benef its: ■ Saves data to the hard disk when the computer automatically shuts down because of a low battery . ■ Y ou can return to your previous working environment immediately when you turn on the comput er .
User ’s Manual 3-1 1 Getting S tarted Data save in Hibernation Mode When you turn off the power in Hibernation Mode, the computer takes a moment to save current memory data to the hard disk.
User ’s Manual 3-12 Getting S tarted Entering St andby Mode Y ou can enter St andby Mode in one o f three ways: 1. Click Start , click T urn Off Computer and click Stand b y . 2. Close the displ ay panel. This feature must be enable d. Refer to the Setup Action tab in TOSHIBA Power Saver Utility .
User ’s Manual 3-13 Getting S tarted Restoring the preinst alled sof tware If the preinstalled files are damaged , use the Product Recovery DVD-ROM to restore them. T o restore the op erating system and all preinstalled software, follow the steps below .
User ’s Manual 4-1 Chapter 4 Operating Basics This chapter gives information on basic operation s including using the T ouch Pad, optical media drive, sound system, modem, the Wi reless LAN and LAN. It also provides tips on cleaning and moving your comp uter .
User ’s Manual 4-2 Operating Basics For some functions, you can tap the T ouch Pad instead of pressing a control button. Using the optical media drive The full-size drive pr ovides high- performance execution o f CD-ROM-based programs. Y ou ca n run either 12 cm (4.
User ’s Manual 4-3 Operating Basics Loading discs T o load a disc, follow the steps below and refer to the figures. 1. a. When the power is on, press the eject button to open the drawer slightly . Pressing the eject button b. Pressing th e eject button will not open the drawer when th e disc drive's power is off.
User ’s Manual 4-4 Operating Basics 2. Grasp the drawer gentl y and pull until it i s fully opened. Pulling the drawer open 3. Place the disc, la bel side up, in the dr awer .
User ’s Manual 4-5 Operating Basics 4. Press gently at the centre of the disc until you feel it click into place. The disc should lie b elow the top of the spin dle, flush with the spi ndle base. 5. Push the center of the drawer to cl ose it. Press gently until it locks into place.
User ’s Manual 4-6 Operating Basics Removing discs T o remove the disc, follow the steps below and refer to the figure. 1. T o pop the drawe r partially open, pr ess the eject button. Gently pull the drawer out until it i s fully opene d. 2. The disc extends sl ightly over the sides of the drawer so you can hold it.
User ’s Manual 4-7 Operating Basics W riting CDs with the DVD-ROM & CD-R/R W drive Depending on the type of drive installed, you may be able to write CDs. The DVD-ROM & CD-R/RW drive lets you read DVD-ROMs and CDs as well as write CD-R/RW . Observe th e precautions in this secti on to ensure the best performance for writing CDs.
User ’s Manual 4-8 Operating Basics ■ Do not run software such as a screen saver wh ich can put a heavy load on the CPU. ■ Operate the computer at full power . Do not use power-saving features. ■ Do not write while virus check software is running.
User ’s Manual 4-9 Operating Basics ■ Damage that may be caused by using third party equipment or software . Given the techno logical limit ations of current optical disc writing drives, you may experience u nexpected writing or rewriting errors due to disc quality or problems with hardware devi ces.
User ’s Manual 4-10 Operating Basics ■ If the disc is poor in quality , dirty or damaged, writing or rewriting errors may occur . Be careful to check the disc for dirt or damage b efore you use it. ■ The actual number of rewrites to CD-RW , DVD-RW , DVD+RW or DVD-RAM is affected by the qu ality of the disc an d the way it is used.
User ’s Manual 4-1 1 Operating Basics ■ Since the disc is based on the DVD standard, it might be filled with dummy data if the written data is le ss than about 1 GB. Even if you write only a small amount of da ta, it might take time to fill in the dummy data.
User ’s Manual 4-12 Operating Basics ■ Set the computer on a level surf ace an d avoid places subject to vibration such as airplanes, trains, or cars. Do not use an unstable surface such as a stand. ■ Keep mobile p hones and other wirel ess communication devices away from the computer .
User ’s Manual 4-13 Operating Basics ■ If you add data to a DVD-R and DV D+R disc that you have already recorded to, you might not be able to read the added data under some circumstances.
User ’s Manual 4-14 Operating Basics ■ Do not use any discs that have be en formatted with packet writing software other than TOSHIBA Direct Di sc Writer . Similarly , do no t use any discs that have been formatted with TOSHIBA Direct Disc W riter with any packet writing software ot her than TOSHIBA Direct Disc Writer .
User ’s Manual 4-15 Operating Basics ■ Do not run software like a screen saver b ecause it can pu t a heavy load on the CPU. ■ Do not run communication applications like a modem or a LAN. Media care This section provides tips on protecting data stored on your CD/DVDs.
User ’s Manual 4-16 Operating Basics Microphone leve l If you have an external microph one connected, you can change the microphone gain. Follow the steps below . 1. Click star t , point to All Programs , point to Accessories , point to Entertainment and click V olume Control .
User ’s Manual 4-17 Operating Basics 2. The Region Selecti on icon will appear in the T ask Bar . Click the icon with the primary mouse button to di splay a list of regions that the modem supports. A sub me nu for telephony l ocation informati on will also be displayed.
User ’s Manual 4-18 Operating Basics Connecting T o connect the modem cable, follow the steps below . 1. Plug one end of the modular cable into the modem jack. 2. Plug the other end of the modular cable into a telephone jack. Connecting the internal modem ■ The modular cable that comes with the computer must be used to connect a modem.
User ’s Manual 4-19 Operating Basics Disconnecting T o disconnect the internal mode m cable, follow the steps below . 1. Pinch the lever on the connecto r in the telephone jack and pull out the connector . 2. In the same way , pull th e cable’s other connector out of the computer .
User ’s Manual 4-20 Operating Basics Wireless c ommunicatio n indicator The wireless communication indicator indicates the status of the wireless communication functions. If you used the T ask Bar to disable Wireless LAN , you will need to restart the computer to re-enable it.
User ’s Manual 4-21 Operating Basics Connecting the LAN cable 3. Plug the other end of the cable in to a LAN hub connector . Check with your LAN administrator before connecting to a h ub. Disconnecting LAN c able T o disconnect the LAN cable, follow the steps below .
User ’s Manual 4-22 Operating Basics ■ If a CD/DVD is in the drive, remove it. Also make sure the drawer is securely closed. ■ T urn off the power to the computer . ■ Disconnect the AC a daptor and a ll peripherals before moving the computer .
User ’s Manual 5-1 Chapter 5 The Keyboard The computer's keyboard layouts are compatible with a 101/102-key enhanced keyboard. By pressing some keys in combination, all the 101/ 102-key keyboard functions can be executed on the compu ter .
User ’s Manual 5-2 The Keyboard F1 ... F12 function keys The function keys (not to be confused with Fn ) are the 12 keys at the top of your keyboard. These keys function differently from other keys. F1 through F12 are called functi on keys because they execute programmed functions when p ressed.
User ’s Manual 5-3 The Keyboard Press Fn + F1 1 to access the inte grated keypad. When activated, the keys with gray markings on the bottom edge become numeric keypad keys. Refer to the Keypad overlay section in this chapter for more i nformation on how to operate these keys.
User ’s Manual 5-4 The Keyboard Hibernatio n: When you press Fn + F4 , the comp uter enters Hibernation Mode. T o avoid entering Hibernation Mode un expectedly , a dialog box appears for verification. However , if you select the check box, it will not appear in the future.
User ’s Manual 5-5 The Keyboard Display resolution selectio n: Press Fn + sp acebar to change the display resolution. Each time when you press these h ot keys, the display resolution changes. TOSHIBA Zooming Utility (reduce): T o reduce the icon size on the desktop or the application window , press the 1 key while holding down the Fn key .
User ’s Manual 5-6 The Keyboard Windows ® special keys The keyboard provides two keys that have speci al functions i n Windows ® : Windows ® logo key activates the start menu and the other , the applicati on key , has the same function as the secondary mouse button.
User ’s Manual 5-7 The Keyboard T emporarily using normal keybo ard (overlay on) While using the overlay , yo u can te mporarily access the normal keyboard without turning off the overlay: 1. Hold Fn and press any other key . All keys will operate as if the overlay were off.
User ’s Manual 6-1 Chapter 6 Power and Power-Up Modes The computer's power resources in cl ude the AC adaptor a nd internal batteries. This chapter gives details on making the most effective use of these resources including charging and ch anging batteries, tips for saving battery power , a nd power up mo des.
User ’s Manual 6-2 Power and Power-Up Modes Power indica tors As shown in the above table, the Battery and Power indicators on t he system indicator panel alert you to th e computer ’s operating cap ability and battery charge status. Batter y indi cat or Check the Battery indicator to determine the status of the battery pack.
User ’s Manual 6-3 Power and Power-Up Modes Power indicator Check the Power indicator to determine the power status: Battery types The computer has the following ba tteries: ■ Battery pack (2000mA.
User ’s Manual 6-4 Power and Power-Up Modes Battery pack T o ensure that the battery pack maint ains its maximum capacity , operate the computer on battery power at l eas t once a month until the battery pack is fully discharged. Refer to Extending battery life in this chapter for procedures.
User ’s Manual 6-5 Power and Power-Up Modes The charge in the RTC battery is ge tting low or has be en exhausted. Y ou will need to set the d ate and time with in the BIOS setup usi ng the following steps: 1. Press F2 key - the BIOS setup screen will be displayed .
User ’s Manual 6-6 Power and Power-Up Modes 4. Never puncture the batte ry pack wit h a nail or other sharp object. Never strike it with a hammer or other object. Never step on it. 5. Never try to charge the battery pack in any manner other than that described in the Use r's manual.
User ’s Manual 6-7 Power and Power-Up Modes Caution 1. Never conti nue to use a battery pack after its recharging capacity has become impaired, or after the display of a warning message indicating that the battery pack’s power is exhausted. Continued use of an exhausted or impaired battery pack could cause the loss of data.
User ’s Manual 6-8 Power and Power-Up Modes Procedures T o recharge a battery pack while it is inst alled in the computer , connect the AC adaptor to th e DC IN 19V jack and plug the other end into a working outlet. The Battery indicato r glows orange when the battery is bein g charged.
User ’s Manual 6-9 Power and Power-Up Modes Monitoring battery c ap acity Remaining battery power can be monitored in TOSHIBA Power Saver . Maximizing battery operating time A battery’s usefulness depends on how long it can supply power on a single charge.
User ’s Manual 6-10 Power and Power-Up Modes ■ The condition of the battery terminals. Make sure the battery terminals stay clean by wiping them with a clean dry cloth before installing the battery pack.
User ’s Manual 6-1 1 Power and Power-Up Modes Replacing the battery p ack When the battery pack reaches the end of its operating li fe you will need to install a new one.
User ’s Manual 6-12 Power and Power-Up Modes Inst alling the ba ttery p ack T o install a battery , follow th e steps below . 1. Tu rn the computer's power off. 2. Disconnect all cab les connected to the computer . 3. Insert the battery pack. 4.
User ’s Manual 6-13 Power and Power-Up Modes Power-up modes The computer has the following po wer-up modes: ■ Boot Mode: Computer shuts down without saving data. Always save your work before you turn the computer off in boot mode. ■ Hibernation Mode: Data in memory is saved to the hard disk.
User ’s Manual 7-1 Chapter 7 HW Setup This chapter explains how to us e TOSHIBA HW Setup program to configure your computer . TOSHIBA HW Setup lets you configure settings for General, Password, Display , Boot Prio rity , Keyboard, LAN, and USB.
User ’s Manual 7-2 HW Setu p Setup This field displays BIOS V ersion and date. Password This tab allows you to set or reset the user p assword for power on.
User ’s Manual 7-3 HW Setu p Keyboard Wa ke-up on Key board When this fea ture is enabled and the computer is in S tandby mode, you can turn on the computer by pressing an y key . It is effective only for the internal keyboard and only when the computer is in standby mode.
User ’s Manual 8-1 Chapter 8 Optional Devices Optional devices can expand the computer's capabilities and its versatility . This chapter describ es connection or installation of the following d.
User ’s Manual 8-2 Optional Devices Inserting a PC C ard The PC Card connector is located on the left side of the computer . Windows ® hot-install feature lets you inse rt PC Cards while the computer ’ s power is on. T o insert a PC Card, follow the steps below .
User ’s Manual 8-3 Optional Devices Removing a PC Card T o remove the PC Card, follow the steps below . 1. Open the Safely Remove Hardw are icon on the T ask Bar and disable the PC Card. 2. Press the PC Card eject butto n to extend it. 3. Press the extended eject button to po p the card out slightly .
User ’s Manual 8-4 Optional Devices Memory expansion Y ou can install additional memo ry in the computer's memory module socket to increase the amount of RAM. This section describes how to install and remove a memory module. Installi ng a memory mod ule Follow the steps below to install a memory module.
User ’s Manual 8-5 Optional Devices Removing the memory module cover 6. Lift one side of the insulator sheet and fit the module's connectors into the computer's connectors at a bou t a 45 degree angle. Press the module carefully to ensu re a firm connection.
User ’s Manual 8-6 Optional Devices 7. Push the module do wn so it lies flat. Latches on ei ther side will click into place to secure the module . Installing the memory module 8. Seat the cover and secure it with the screws. 9. Replace the battery pack as described in Chapter 6, Power and Power- Up Modes .
User ’s Manual 8-7 Optional Devices Removing the memory module 6. Seat the cover and secure it with screws and replace the battery pack. Additional battery p ack Y ou can increase the portability of t he computer with addition al battery packs.
User ’s Manual 8-8 Optional Devices External monitor An external analog monitor can be connected to the external monitor port on the computer . The computer sup ports several video modes. Refer to Appendix B, Display Con troller and Modes . T o connect a moni tor , foll ow the steps below .
User ’s Manual 9-1 Chapter 9 T r oubleshooting TOSHIBA designed the computer for dur ability . However, should problems occur , foll owing the procedu res in this chapter ca n help to determin e the cause. All readers should become familiar with this chapter .
User ’s Manual 9-2 T roubleshooting ■ Make sure all options are set properly in the setup program. ■ Check all cables. Are they correctly an d firmly attached? Loose cables can cause si gnal errors. ■ Inspect all connecting cables for loose wires and all connectors for loose pins.
User ’s Manual 9-3 T roubleshooting Hardware and system checklist This section discusses problems ca used by your computer's hardware or attached peripherals.
User ’s Manual 9-4 T roubleshooting Self test When the computer starts up, the self test will be run automatically , and the following will be displaye d: This message remains on the screen for a few seconds.
User ’s Manual 9-5 T roubleshooting AC power If you have trou ble turning on the co mputer with the AC adaptor co nnected, check the Battery indicator . Refer to Chapter 6, Power and Power-Up Modes for more information. Battery If you suspect a problem with the battery , ch eck the Battery indicator .
User ’s Manual 9-6 T roubleshooting Real Time Clock Unplug the AC adaptor and remove the battery to make sure the terminals are clean. If necessary wipe them with a soft dry cloth dipped in alcohol. Connect the AC adaptor a nd replace the battery . Make sure it is securely seated.
User ’s Manual 9-7 T roubleshooting Keyboard Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 5, The Keyboard .
User ’s Manual 9-8 T roubleshooting CD-RW/DVD-ROM drive For more inform ation, refer to Chapter 4, Operating Basics . Problem Procedure Y ou cannot access a CD/DVD in the drive Make sure the drive’s drawer is securely closed. Press gently until it clicks into place.
User ’s Manual 9-9 T roubleshooting DVD Super Multi drive (Su pporting DVD±R Double Layer) For more inform ation, refer to Chapter 4, Operating Basics . Cannot write correctly If you have tr ouble writing, make sure you are observing the following pre cautions: ■ Use only media recommended by TOSHIBA.
User ’s Manual 9-10 T roubleshooting PC Card Refer also to Chapter 8, Optional Devices . Some CD/DVDs run correctly , but others do not The software or hardware configuration may be causing a problem. Make sure the hardware configuration matches your software's needs.
User ’s Manual 9-1 1 T roubleshooting Pointing devic e If you are using a USB mouse, also refer to the USB section in this chapter and to your mouse documentation. T ouch Pad Problem Procedure On-screen pointer does not respond to Pad operation The system might be busy .
User ’s Manual 9-12 T roubleshooting USB mouse USB Also refer to your USB device’s document ation. Problem Procedure On-screen pointer does not respond to mouse operation The system might be busy . If the pointer is shaped as an hourglass, wait for it to resume its normal shape and try again to move it.
User ’s Manual 9-13 T roubleshooting Memory ex p ansion Refer also to Chapter 8, Optional Devices , for information on installing memory modules. Sound system Refer also to documentation fo r your audio devices. Monitor Refer also to Chapter 8, Optional Devices , and to your monitor ’s documentation.
User ’s Manual 9-14 T roubleshooting Modem Display error occurs Check that the cable connecting the external monitor to the computer i s attached firmly .
User ’s Manual 9-15 T roubleshooting LAN Wirele ss LAN If the following procedures do not re store LAN access, consult your LAN administrator . For more information on wireless communication, refer to Chapter 4, Operating Basics .
User ’s Manual A-1 Appendix A S pecifications This appendix summarizes the computer's technical specifi cations. Physical Dimensions Environment al Requirement s Power Requirements Wei gh t 2.3kg-2.7kg * Weight may vary depending on product configuration, vendor co mponents, manufacturing variability and options selected.
User ’s Manual A-2 S pecifications Built-in Modem Network control unit (NCU) T ype of NCU AA T ype of line T elephone line (analog on ly) T ype of diallin g Pulse To n e Control command A T commands.
User ’s Manual A-3 S pecifications T ransmittin g level -10 dBm Receiving level -10 to -40 dBm Input/output impedanc e 600 ohms ±30% Error correcting MNP class 4 and ITU-T V .
User ’s Manual B-1 Appendix B Display Controller and Modes Display controller The display controller in terprets software commands into hardware commands that turn particular pict ure el ements (pels) on or off.
User ’s Manual B-2 Display Controller and Modes V ideo modes The computer supports video modes defined in the tables below . If your application offers a selection of mo de numbers that do not match the numbers on the table, select a mod e based on mode type, resolution, character matrix, number of colors and refresh rates.
User ’s Manual B-3 Display Controller and Modes DV G A Grph 320 × 200 Pels 8 × 8 16 of 256K 16 of 256K 70 EV G A Grph 640 × 200 Pels 8 × 8 16 of 256K 16 of 256K 70 FV G A Grph 640 × 350 Pels 8 .
User ’s Manual B-4 Display Controller and Modes T a ble 2: V ideo modes Resolution LCD colors CRT c olors V ertical fr equency (Hz) 800 × 600 256K/256K 256K/256K 60 75 85 100 1024 × 768 256K/2 56K.
User ’s Manual B-5 Display Controller and Modes T a ble 2: V ideo modes (continued) Resolution LCD colors CRT colo rs V ertical frequency (Hz) 800 × 600 64K/64K 64K/64K 60 75 85 100 1024 × 768 64K.
User ’s Manual B-6 Display Controller and Modes T a ble 2: V ideo modes (continued) Resolution LCD colors CRT c olors V ertical fr equency (Hz) 800 × 600 16M/16M 16M/16M 60 75 85 100 1024 × 768 16.
User ’s Manual B-7 Display Controller and Modes Display Settings 1. Y o u cannot move from the Settings tab of Display Proper ties to the multi-monitor when you are using the displ ay of the computer and an external CR T display at the same time.
User ’s Manual B-8 Display Controller and Modes 2. In some cases DVD vid eo playback images ma y not be displayed when the display of the computer and a CRT display are used at the same. Reduce the resolution, use the displa y of the computer only , use the CRT display only or set display device in the multi-monitor , then play DVD.
User ’s Manual B-9 Display Controller and Modes 5. When the LCD (intern al liquid crystal display) display mo de is selected, the Virtual (V irtual Screen) disp lay mode can be set.
User ’s Manual C-1 Appendix C Wireless LAN Card S pecifications Radio Characteristics Radio Characteristics of Wireless LAN Cards may vary according to: ■ Country/region where the produ ct was purchased ■ T ype of product Wireless communication is often subject to local radio regulations.
User ’s Manual C-2 Wireless LAN The range of the wireless signal is related to the transmit rate of the wireless com municatio n de vice. Communications at a lower transmissi on rate may travel larger distances.
User ’s Manual C-3 Wireless LAN *1 Factory-set def ault channels *2 Refer to your Authorized Wireless LAN or TOSHIBA Sales office for information on the countries/regions in which these channels can be used.
User ’s Manual D-1 Appendix D AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Certification agencies Europe: Length: Minimum 1.
User ’s Manual D-2 AC Power Cord and Connectors In Europe, power cords must be VDE type, H05VVH2-F and two condu ctor . For the United S tates and Canada, plug configuration must be a 2-15P (250 V) or 1-15P (125 V) as designate d in the U.S. Nati onal Electrical code handbook and the Canadian Electrical Cod e Part II.
User ’s Manual E-1 Appendix E If your computer is stolen Should your comput er be stolen , however , we’ll h elp you try to find it. Before contacting TOSHIBA, please prepare the follo wing inform.
User ’s Manual E-2 If your computer is stolen T o register the theft online, ple ase follow these procedures: ■ Vis i t www .toshib a-europe.com on the Internet. In the product area, choose Computer Systems . ■ In the Computer Systems page, open the Support & Dow nloads menu and choose the Stolen Units Dat abase option.
User ’s Manual Glossa ry-1 Glossary The terms in this glossary cover topi cs related to this manual. Alternate naming is included for reference. Abbreviations AC: alternating current AGP: accelerate.
User ’s Manual Glossa ry-2 Glossary KB: kilobyte LCD: liquid crystal display LED: light emitting d iode LSI: large scale integratio n MS-DOS: Microsoft ® disk Operating System OCR: optical characte.
User ’s Manual Glossa ry-3 Glossary ANSI: American National S tandards Instit ute. An organization established to adopt and define standards for a variety of technical disciplines. For example, ANSI defined the ASCII standard and other information processing requirements.
User ’s Manual Glossa ry-4 Glossary bus: An interface for transmission of signals, data or electric power . byte: The representation of a single char acter . A sequence of eight bits treated as a single unit; also the smallest addressa ble unit within the system.
User ’s Manual Glossa ry-5 Glossary communications: The means by which a computer transmits and receives data to and from another computer or device.
User ’s Manual Glossa ry-6 Glossary DC: Direct Current. Electric current that fl ows in one direction. This type of power is usually supplied by batteries. default: The parameter value automatically selected by the system when you or the program do not provide instructions.
User ’s Manual Glossa ry-7 Glossary escape: 1) A code (ASCII code 27), si gnalling the computer that what follows are commands; used with peripheral device s such as printers and modems.
User ’s Manual Glossa ry-8 Glossary hardware: The physical electronic and mechanical componen ts of a computer system: typically , the comp uter itself, external disc drives, etc. See also software and firmware. hertz: A unit of wave fre quency that equals one cycle per second.
User ’s Manual Glossa ry-9 Glossary J jumper: A small clip or wire that a llows you to change the hardware characteristics by electrically c onnecting two points of a circuit. K K: T aken from the Greek word kilo, meani ng 1000; often used as e quivalent to 1024, or 2 raised to the 10th power .
User ’s Manual Glossary-10 Glossary M main board: See motherboard. megabyte (MB): A unit of data storage equal to 1024 kilobytes. See al so kilobyte. megahertz: A unit of wave frequency that equals 1 million cycles per second. See also hertz. menu: A software interface that displays a list of options on the screen.
User ’s Manual Glossary-1 1 Glossary online state: A functional st ate of a peripheral device when it is ready to receive or transmit data. operating system: A group of programs that controls the basic operation of a computer .
User ’s Manual Glossary-12 Glossary R Radio frequency interference (RFI ) shield: A metal shield enclosing the printed circuit boa rds of the printer or computer to preven t radio and TV interference. All computer equ ipment generates radio frequency signals.
User ’s Manual Glossary-13 Glossary subpixel: Three elements, one red, one green and blue (RGB), that make up a pixel on the color LCD. The computer sets subpixels independently , each may emit a different degree of brightness. See also pixel. synchronous: Having a constant time interval between successive bits, characters or events.
User ’s Manual Index-1 Index A AC adaptor, 1-3 additional, 1-12 connecting, 3-6 ASCII characters, 5-7 B Battery charging, 6 -7 extending b attery life, 6- 10 indicator, 6-1 location, 2-5 Monitoring .
User ’s Manual Index-2 Index F Floppy disk using, 4-2 Fn + Esc (sound mute), 5-3 Fn + F1 (instant security), 5-3 Fn + F2 (power save mode), 5-3 Fn + F3 (s tandby), 5- 3 Fn + F4 (hib ernation), 5- 4 .
User ’s Manual Index-3 Index Problems AC power, 9-5 analyzing, 9-2 Battery, 9-5 CD-RW/DVD-ROM drive, 9-8 DVD Super Multi drive, 9-9 Hard disk drive, 9-7 Hardware and system checklist, 9-3 Keyboard, .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Toshiba L30 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Toshiba L30 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Toshiba L30, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Toshiba L30 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Toshiba L30, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Toshiba L30.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Toshiba L30. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Toshiba L30 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
