Manuel d'utilisation / d'entretien du produit FT-8801A du fabricant Toshiba
Aller à la page of 37
Preparation Basics Caller ID/Call waiting Additional Information 2 FT-8801A.qxd 7/13/1 10:40 AM Page 1.
2 GETTING ST ARTED: DO THIS FIRST! FIRST , CHARGE THE HANDSET BA TTERY! • Set your new phone in an out-of-the-way place near a power outlet where it will not be disturbed. • Plug the AC adaptor into the wall outlet. • Plug the AC adaptor cord into the power jack on the base unit.
INTRODUCTION 3 9 0 0 M H z • 900 MHz Analog T ransmission with Extended T alk Range • 40 Channel Auto Scanning • 20 Name & Number Caller ID • Caller ID on Call W aiting • Advanced Compan.
T ABLE OF CONTENTS 4 Preparation INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 IMPORT ANT SAFETY INSTRUCTIONS .
T ABLE OF CONTENTS 5 If you make a mistake while entering a name . . . . . . . . . . . . . . . . . .23 Dialing a stored number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Editing and deleting stored numbers . . . . . . . . . .
6 Preparation IMPORT ANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury . 1 Read and understand all instructions. 2 Follow all warnings and instructions marked on the product.
7 Preparation The RBRC TM Seal The RBRC TM Seal on the (easily removable) nickel-cadmium battery (contained in our product) indicates that T oshiba America Consumer Products, Inc.
8 Preparation TO NE 900M H z T U V 8 W X Y Z 9 P Q R S 7 OPER 0 # J K L G H I 5 6 4 A B C D E F M N O 2 3 1 T A LK M EM D E L E T E C H P A U S E FU N C S E L E C T CID L O C A L L .
LOCA TION OF CONTROLS 9 Preparation Charging contacts 9 0 0 M H z PAGE CHARGE IN USE BASE UNIT DC IN 9V jack (page 10) LINE modular jack (page 10) Cradle Antenna IN USE/CHARGE LED button (page 19) PAG.
10 INST ALLA TION SETTING UP THE BASE UNIT (DESK TOP MOUNTING) For setting up the base unit follow the instructions below . • Plug the AC adaptor firmly into the base unit and the AC 120V outlet. • USE ONL Y WITH Supplied AC ADAPTOR (T AC-8001 power source AC 120V 60Hz/DC9V).
11 Preparation SETTING UP THE BASE UNIT (W ALL MOUNTING) MOUNTING ON A ST ANDARD W ALL PLA TE: Insert the bracket ’ s tabs into the notches on the base. • Route the cords through the guides. • Place the base unit on the posts of the wall plate and push down until it is firmly seated.
12 Preparation CHARGING THE BA TTER Y P ACK It is important to charge the battery for 12 to 16 hours continuously without any interruption before you use the handset for the first time. 1 Remove the battery cover on the back of the handset by sliding it down.
13 Preparation INST ALLA TION NOTES: • Use only the supplied battery pack (TRB-8000 power source 600mAh, 3.6VDC) • The battery pack is not charged properly if the charging contacts are dirty or tarnished. Clean the contacts occasionally with a dry cloth.
14 INST ALLA TION Preparation Before using the Handset, make sure to read the following instructions SETTING THE DIAL MODE Depending on your dialing system, set the mode as follows: 1 Press and hold until you hear a confirmation tone. 2 T o set the dial mode for pulse dialing, press .
INST ALLA TION 15 SETTING OR CANCELING THE AUTO T ALK FUNCTION If the handset is placed on the base unit, you can answer a call by lifting the handset from the base unit (Auto T alk). If the handset is not on the base unit, you can answer a call by pressing any one of the buttons (Any-key Answer function).
16 INST ALLA TION SETTING THE AREA CODE It is necessary to program your area code so that local calls will be displayed properly on caller ID. 1 Press . 2 Press or to move the pointer to Area Code. 3 Press . Enter a 3-digit area code. For example, enter “ 615.
MAKING A CALL RECEIVING A CALL BASIC OPERA TION 17 Basics DELETE TALK VOL/RING REDIAL FLASH T o hang up: Press , or return the handset to the base (Auto Standby). TALK Basics NOTE: T o delete a wrong number , press or , and . T o delete all numbers, press and hold .
18 BASIC OPERA TION Basics OUT OF RANGE During a call, as you begin to move too far from the base unit, the noise increases. Then, you should move close to the base unit. If you travel out-of-range, your call terminates.(See page 19 “ Interference or static ” ).
BASIC OPERA TION 19 Basics T ONE/P AUSE INTERFERENCE OR ST A TIC If you hear noise during a call, press to select another channel. The LCD displays “ Scanning ” while changing a channel. P AGING THE HANDSET 1 T o locate the handset while it is off the base, press .
20 Basics MEMOR Y DIALING Y ou can store up to 10 telephone numbers and their associated names in the memory . NOTES: • Always press a button within 20 seconds or the phone will return to standby . • If you press a wrong button, an error tone sounds and the handset returns to standby mode.
MEMOR Y DIALING 21 3 Press . 4 T o enter a name, use the number keys. • See the steps for storing names and special characters. (see page 22) • If a name is not required, go to step 5.
22 MEMOR Y DIALING For example, to enter “ Ted Doe ” and 1 - 1 2 3 - 4 5 6 - 7 8 9 0 1 Pick up the handset and press and hold . 2 Enter a number or press , to select a free memory location number . 3 Press . 4 Press once. 5 Press five times then press to move the cursor to the right.
MEMOR Y DIALING 23 Basics 10 When finished, press . 11 Press to be stored. 12 Press . IF YOU MAKE A MIST AKE WHILE ENTERING A NAME Use or to move the cursor to the incorrect character . Press to erase the wrong entry , then enter the correct character .
24 MEMOR Y DIALING Basics EDITING AND DELETING STORED NUMBERS Y ou can delete a number or simply store another one in its place. When you store a new phone number , the data stored in that memory location is deleted automatically . 1 Pick up the handset and press and hold .
b DELETING THE STORED DA T A (1) Press or to move the pointer to select or . (2) Press or . If is selected: a confirmation tone sounds and the number is erased. If is selected: the LCD returns to the “ Memory Store ” display . (3) Press , or return the handset to the base unit.
26 CALLER ID/CALL W AITING • Before you can take advantage of the Caller ID and Call W aiting features, you must subscribe to these services from your local telephone company . • Name and number caller ID only work in conjunction with service provided by your local telephone company .
CALLER ID/CALL W AITING 27 Caller ID/Call waiting FLASH LOCAL/3 SELECT CID DELETE TALK L.D./1 () VOL/RING "Caller ID" and "Call waiting" are separate services. CIDCW (Caller ID on Call W aiting) performs the same as regular Caller ID on a call waiting number .
28 Caller ID/Call waiting CALLER ID/CALL W AITING SEARCHING CALLER ID MEMOR Y T o review who has called, follow the steps below . The caller ID memory retains a listing of the 20 most recent callers. 1 Pick up the handset and press . If new caller ID data does not exist: If there is new caller ID data: 2 Press to display the latest incoming call.
29 Caller ID/Call waiting CALLER ID/CALL W AITING EDITING CALLER ID DA T A Y ou can edit the Caller ID data. 1 Pick up the handset and press . Then, press or repeatedly to display the Caller ID data you want to edit. 2 Press for a long distance call prefix “ 1 ” and for area code setting and cancellation.
30 Caller ID/Call waiting CALLER ID/CALL W AITING 4 Press . A confirmation tone sounds and the Caller ID data is stored. Press to return to standby . If you select a memory location in which data is already stored: Press to select and press . A confirmation tone sounds and the new data overwrites the old data.
31 Caller ID/Call waiting CALLER ID/CALL W AITING DELETE ALL CALLER ID DA T A: 1 Press . 2 Press . Press or to select Yes or No . 3 Press or . If you select , a confirmation tone sounds and the LCD displays “ Total:00 ” . If you select , the LCD displays the number of Caller ID calls.
32 Additional Information TROUBLESHOOTING Should any problem occur with the unit, use the following simple tests to determine whether or not servicing is required. PROBLEM The handset battery pack does not charge. Battery pack becomes low quickly . Can not make or receive calls.
TROUBLESHOOTING 33 Additional Information CHARGE LED will not light when the handset is placed on the base. Noise or interference. The unit does not operate properly . When the handset is returned to the base unit with the volume level set at High, a momentary squeal or howling sound may sometimes be heard.
34 W ARRANTY/SER VICE Additional Information SER VICE REQUIREMENTS If the cordless telephone should malfunction, or need changes or modifications, all repairs will be performed by an authorized T oshiba Service Station. This unit has been registered with the FCC for direct connection to the telephone network.
W ARRANTY/SER VICE 35 TELEPHONE/TELEPHONE ANSWER MA CHINE LIMITED W ARRANTY T oshiba America Consumer Products. Inc (“T A CP”) and T oshiba Haw aii, Inc.
QUICK REFERENCE GUIDE Read the Owner’ s Manual for details. CALLER ID CORDLESS TELEPHONE FT -8801A UCZZ69338BZ RC012154 Printed in China SETTING UP THE BASE UNIT CHARGING THE BA TTER Y P ACK 9 0 0 M H z Red Black IN USE/ CHARGE LED Charging contacts SETTING / USING THE PHONE 1 Press FUNC , then press 3 .
For technical assistance, purchase of accessories or service, please access www .toshiba.com/tacp. UCZZ01338BZ RC012153 Printed in China IMPORT ANT We suggest you record the following information and retain for your records along with your bill of sale or equipment document.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Toshiba FT-8801A c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Toshiba FT-8801A - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Toshiba FT-8801A, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Toshiba FT-8801A va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Toshiba FT-8801A, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Toshiba FT-8801A.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Toshiba FT-8801A. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Toshiba FT-8801A ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
