Manuel d'utilisation / d'entretien du produit E2711 du fabricant Toshiba
Aller à la page of 25
ST - 6500 Setup Guide for Windows TOSHIBA TEC CORPORATION.
Windows Setup Guide for ST - 6500/ST - 6500 - C7 TOSHIBA TEC CORPORATION 1 1. Introduction This setup guide describes the procedure and notes for installing the drivers on the ST - 6500/ST - 6500 - C7. The procedure outline to set up the OS for the ST - 6500/ST - 6500 - C7 is describe d below.
Windows Setup Guide for ST - 6500/ST - 6500 - C7 TOSHIBA TEC CORPORATION 2 2. Setup on Windows 98/Windows 98SE 1) Setting up BIOS By pressing the F2 key on the keyboard, when the machine starts up, the BIOS Setup Menu is selected. Select the following item for BIOS setup.
Windows Setup Guide for ST - 6500/ST - 6500 - C7 TOSHIBA TEC CORPORATION 3 The following screen appears. Select “ Reinstall Driver ” to install the driver. Select the folder to extract 100pdisk. exe to, as the folder containing the driver to be installed.
Windows Setup Guide for ST - 6500/ST - 6500 - C7 TOSHIBA TEC CORPORATION 4 4) Installing the SM712 Graphic Driv er Select [Display] on the Control Panel and display the “ Display Properties ” screen. On this screen, select [Settings] – [Advanced] to display the “ Standard PCI Graphics Adapter Properties ” screen.
Windows Setup Guide for ST - 6500/ST - 6500 - C7 TOSHIBA TEC CORPORATION 5 6) Installing the PnP Touch Panel Driver Select “ SMK PnP TABLET ” in the Device Manager, and click on the “ Properties ” button. On the “ SMK PnP TABLET properties ” screen, select [General] – [Reinstall Driver] to install the driver.
Windows Setup Guide for ST - 6500/ST - 6500 - C7 TOSHIBA TEC CORPORATION 6 IMPORTANT: * Unless any of the PS/2 mouse, the serial mou se, or the USB mouse is used, the touch panel is not detected. When installing the driver, connect any of the mice and let the machine detect the touch panel.
Windows Setup Guide for ST - 6500/ST - 6500 - C7 TOSHIBA TEC CORPORATION 7 8) Setting up the Dual Display To enable the dual display, carry out this setup. The ST - 6500 - C7 enables the dual display using the Dual Display functions supported by Windows.
Windows Setup Guide for ST - 6500/ST - 6500 - C7 TOSHIBA TEC CORPORATION 8 IMPORTANT: * If the SM712 VGA board (SMI) has been inserted on the machine , when Windows 98 is installed, the on - board VGA (Intel810E2) cannot be used after Windows 98 has been installed .
Windows Setup Guide for ST - 6500/ST - 6500 - C7 TOSHIBA TEC CORPORATION 9 9) Cautions of dual - screen use by Windows98 and Windows98SE. If a dual - screen is set up by Windows 98 and Windows 98SE, an error may occur.
Windows Setup Guide for ST - 6500/ST - 6500 - C7 TOSHIBA TEC CORPORATION 10 Apply button is clicked. Please perform PC re - starting or PC shutdown in the state having opened the control panel. Please do not click OK button or Cancel button of a display properties control pan el.
Windows Setup Guide for ST - 6500/ST - 6500 - C7 TOSHIBA TEC CORPORATION 11 3. Setup on Windows NT 4.0 1) Setting up BIOS By pressing the F2 key on the keyboard when the machine starts up, the BIOS Setup Menu is selected. Select the following item for BIOS se tup.
Windows Setup Guide for ST - 6500/ST - 6500 - C7 TOSHIBA TEC CORPORATION 12 Click on the “ Select from list ” button, and s elect the extracted folder to install the driver. For the detailed installation procedure, refer to Intel ’ s documents or online help.
Windows Setup Guide for ST - 6500/ST - 6500 - C7 TOSHIBA TEC CORPORATION 13 5) Installing the SM712 Graphic Driver To use the SM712 VGA board (SMI), ins tall this driver. Select [Display] on the Control Panel to display the “ Display Properties ” screen.
Windows Setup Guide for ST - 6500/ST - 6500 - C7 TOSHIBA TEC CORPORATION 14 7) Installing the PnP Touch Panel Driver Select [Mouse] on the Control Panel to display the “ Mouse Properties ” screen. Select [General] – [Cha nge]. Select the “ PnPTablet ¥ WinNT ” fonder in the driver kit to install “ SMK PnP Tablet Driver.
Windows Setup Guide for ST - 6500/ST - 6500 - C7 TOSHIBA TEC CORPORATION 15 4. Setup on Windows 2000 1) Setting up BIOS By pressing the F2 key on the keyboard, when the machine starts up, the BIOS Setup Menu is selected. Select the following item for BIOS setup.
Windows Setup Guide for ST - 6500/ST - 6500 - C7 TOSHIBA TEC CORPORATION 16 On the “ Found New Hardware Wizard ” screen, select “ Search for su itable driver for my device ” and click on [Next]. Then, select “ Specify a location ” and designate the “ Tablet ¥ PnPTablet ¥ Win2K ” folder in the driver kit to install the driver.
Windows Setup Guide for ST - 6500/ST - 6500 - C7 TOSHIBA TEC CORPORATION 17 w Installing the Intel 810/815 Chipset Family Graphics To enable the CRT d isplay, install this driver . Execute “ Chipset ¥ Graphics ¥ Win2K_XP ¥ Graphics ¥ Setup.exe ” contained in the driver kit, and install the “ Intel 810/815 Chipset Family Graphics Driver.
Windows Setup Guide for ST - 6500/ST - 6500 - C7 TOSHIBA TEC CORPORATION 18 5) Changing the Serial Port Setting On Windows 2000, COM4 is recognized as if there are two.
Windows Setup Guide for ST - 6500/ST - 6500 - C7 TOSHIBA TEC CORPORATION 19 7) Setting up the Dual Display Refer to 8) Setting up the Dual Display of Section 2.
Windows Setup Guide for ST - 6500/ST - 6500 - C7 TOSHIBA TEC CORPORATION 20 IMPORTANT: * On Windows 2000, the on - board VGA (Intel810E2) is set as primary monitor.
Windows Setup Guide for ST - 6500/ST - 6500 - C7 TOSHIBA TEC CORPORATION 21 5. Setup on Windows XP 1) Setting up BIOS By pressing the F2 key on the keyboard when the machine starts up, the BIOS Setup Menu is selected. Select the following item for BIOS setup.
Windows Setup Guide for ST - 6500/ST - 6500 - C7 TOSHIBA TEC CORPORATION 22 On the “ Foun d New Hardware Wizard ” screen, select “ Install from list or specific location ” and click on [Next]. Select “ Include this location in the search ” and designate the “ PnPTablet ¥ WIN2K ” folder in the driver kit to install the driver.
Windows Setup Guide for ST - 6500/ST - 6500 - C7 TOSHIBA TEC CORPORATION 23 Reboot the machine. Select [Control Panel] – [Touch Panel] to display the “ Touch Panel Property ” screen. On this screen, select [Calibration] – [Execute] to set up calibration.
Windows Setup Guide for ST - 6500/ST - 6500 - C7 TOSHIBA TEC CORPORATION 24 7) Setting up the Dual Displa y Refer to 8) Setting up the Dual Display of Section 2.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Toshiba E2711 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Toshiba E2711 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Toshiba E2711, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Toshiba E2711 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Toshiba E2711, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Toshiba E2711.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Toshiba E2711. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Toshiba E2711 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
