Manuel d'utilisation / d'entretien du produit 46UL610U du fabricant Toshiba
Aller à la page of 106
46UL610U 55UL610U 65UL610U Integrated High Definition LCD Television © 2011 TOSHIBA CORPORATION All Rights Reserved Owner’s Record The model number and serial number are on the back and side of your TV. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV.
2 Dear Customer, Thank you fo r purc hasing this Toshiba LCD TV. This manual will help you use the many exciting features of y our new LCD TV. Before operatin g your LCD TV, please rea d this manual comp letely , and keep it nearby for future refe rence.
3 Important Safety Instructions 1) Rea d these instructions . 2) Keep these instruc tions. 3) Hee d all warnin g s. 4) Follow all instructions. 5) Do not use this ap paratus near water. 6) Clean only wi th d ry cloth. 7) Do not block a ny ventilation ope nin g s.
4 • Ensure that the TV is not hanging over the edge of the supporting furnitur e. • Never place the T V on tall furnitur e (for exam ple, cupboards or bookcases) wi thout anchoring both the furniture and the TV to a suitable support • Never sta nd the TV on cloth or other material pl aced between the TV and supporting furniture.
5 volatile compounds such as insecticide on the TV surface. Such products may damage or discolor the TV. 38) Never hit, press, or place anything on the back cover. These actions will damage internal parts. 39) Never spil l liquid s or push ob jects of a ny kind into the TV cabine t slots.
6 Removing the Pedestal Stand 1) Carefully lay the front of th e unit face down on a flat, cushioned s urface such as a quilt or blanket. Le ave the stand protrudin g over the ed ge of the surf ace. Note: Extreme care should always be used when removing the pedestal stand to avoid damag e to the LCD panel.
7 •I f 3 D i m a g es often appear d oubl e d or if you cannot see the ima g es in 3D, stop viewin g . Continuous viewing may cause eye strain. • Due to the possible imp act on vision d evel opment, viewers of 3D vi d eo ima g es sho ul d be a g e 6 or above.
8 Canada - Industry Canada Statement This device complies with RSS-210. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, an d (2) This device must accept any interference r eceived, including interference that may cause undesired ope ration of the device.
9 Trademark Information • Manufactured under lice nse from Dolby Laboratories. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. • Audyssey Dynamic Volume ® controls volume levels to eliminate loud spikes and raise soft dialog for more enjoyable television and movie viewing.
10 Contents Impo r tant Safety Inst r uctio ns . . . . . . . . . . . . . . . . . . . . . . 3 Installation, Ca r e, and Se r vice . . . . . . . . . . . . . . . . . . . . . 3 Choosing a location fo r you r LCD TV . . . . . . . . . . . . . . . . . 5 Safety P r ecautions fo r 3D glas ses .
11 Test Pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 RGB Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 White Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Resetting to the factory d efault .
12 Chapter 1: Introduction Features • Integrated digital tuning (8VSB ATSC and QAM) eliminates the need for a separate digital converter set-top box (in most cases). • 1080p output resolution. • Four HDMI ® digital, High-Definition Multimedia Interfaces with 1080p input support ( - p.
13 Chapter 1: Introd uction Front panel control Examples show Model 46UL610U. Back panel connections For explanations of cable type s and connections, see p. 15–23. TV f r ont Bri g htness S ensor This sensor will detect the ambient light conditions to optimize the backli gh ting levels ( - p.
14 Chapter 1: Introd uction Bundling the cables Install the cable cl amps and bundle the cables in them. Stand type Wall Mount type Cable Clamps Cable Clamps.
15 Chapter 2: Connecting your TV Overview of cable types Before purchasing cables, know the connector types your devices require. You can purchase cables from most stores that sell audio/video devi ces. Coaxial cable (F-typ e) (F-type) Connects yo ur antenna, cabl e TV service, or cable converter box to your TV.
16 Chapter 2: Connecting your TV Connecting to a Satellite dish, an Antenna, or Cable TV IN OUT CH 3 CH 4 VIDEO OUT AUDIO OUT COMPONENT VIDEO L R S atellite IN P B P R Y TV back panel VHF/UHF Antenna .
17 Chapter 2: Connecting your TV Connecting an HDMI ® or DVI device to the HDMI input HDMI OUT DVI /HDCP OUT AUDIO R L OUT TV back panel HDMI device DVI device HDMI cable Analog audio cable HDMI-to-D.
18 Chapter 2: Connecting your TV Connecting a VCR or DVD player with ColorStream ® (component video) VIDEO AUDIO LR COMPONENT VIDEO P B P R Y AUDIO OUT LR R W Y G B R W Y R W R B R W Y R W R GB G W T.
19 Chapter 2: Connecting your TV Connecting remote IR devices Using the IR OUT terminal You can use the TV’s IR OUT terminal to remotely operate many infrared remote-controlled devices enclosed in an entertainment center or similar ca binet. You will need: • Dual-wan d IR blaste r cable ( - p.
20 Chapter 2: Connecting your TV Using the IR IN terminal For additional control opti ons for your home theater system, you can conn ect an IR receiver/repeater control system (not includ ed) to the TV’s IR I N termina l. You will need: •I R c a b l e To set the IR IN mode: 1 > S ettin g s > PREFER ENCE S > IR Control .
21 Chapter 2: Connecting your TV Using the TV remote and HDMI ® CEC Control to control other devices To control the basic function s of connected audio/video devices using th e TV’s remote contro l, connect an HDMI ® CEC compatible audio receiver or playback device.
22 Chapter 2: Connecting your TV Connecting a PC You can view your PC’s display on the TV and hear the sound from the TV’s speakers. Connecting to the TV’s PC IN terminal You will need: • Analog RGB (15-pin) computer cable •A n a l o g a u d i o c a b l e Before using the PC: See “Using your PC wi th the TV” ( - p.
23 Chapter 2: Connecting your TV Connecting to a home network The LAN port all ows your Toshiba TV to connect to your home network. You can use this ho me network to access photos, movies, and music files that are stored on a DLNA CERTIFIED ™ Server and play them on your TV.
24 Chapter 3: Using the remote control Controlling other devices The TV’s remote control can operate other devices such as cable converter boxes, satellite receivers, VCRs, DVD players, and HTIBs (home theater in a box). Toshiba devices: The remote is programmed to operate a va riety of devices ( - p.
25 Chapter 3: Using the remote co ntrol Learning about the Remote Control Only the buttons u sed to operate the TV are des cribed in thi s sectio n. For the HDMI ® CEC Control functions, see “Using HDMI ® CEC Control” ( - p. 48). For a complete list of the remote’s functions, see “Remote control fu nctional key chart” ( - p.
26 Chapter 4: Initial Setup and Menu Initial Setup When you first tu rn on or reset the TV, the Initial Setup window will appear. Note: • You can stop Initial Setup by pre ssing . Howeve r, if you do not finish Initial Setup, the Initial Setup scree n will appear every time you turn on your TV.
27 Chapter 4: Initial Setu p and Menu 6 S tart S can Note: If you want to stop scanning, press while scanning. • After scanning is complete, a ch annel list screen (such as the one below) will appear. Press or . Note: Encrypted channels cannot be registered though these are displayed in th e above list.
28 Chapter 4: Initial Setu p and Menu Main menu layout To open the main menus (il lustrated below), press on the remote control or TV control panel. 1st Laye r 2nd Laye r 3 r d Laye r Page Network NET.
29 Chapter 4: Initial Setu p and Menu Quick menu Quick menu helps you access some options more quickly. Press to display th e Quick menu and press B or b to select an option.
30 Chapter 5: Setting up your TV How to navigate the menu: > Settings > Main menu > Submenu > Changing Initial settings From Quick Setup : 1 > S ettin g s > S ETUP > Quic k S etup > . 2 A confirmation message appears. Press C or c to select Yes .
31 Chapter 5: Setting up your TV 1 > S ettin g s > S ETUP > Auto Tunin g > . A confirmation screen appears. 2 Press to start Auto Tu ning or to abort. The TV cycles through all th e channels and stores all active channels in memory. To view the programmed channels, press or .
32 Chapter 5: Setting up your TV Labeling channels You can label analog TV channels. 1 > S ettin g s > S ETUP > TV S ettin g s > . 2 Press B or b to select Channel Options . Press . The list of channels appears. 3 Press B or b to select a channel to labe l.
33 Chapter 5: Setting up your TV Setting the Auto Input feature You can change TV inputs using the MODE S ELECT buttons on the remo te control: TV , CABLE/ S AT , BD / DVD , AUX .
34 Chapter 6: Basic features Viewing 3D images Before using the 3D function , note the following. In addition to compatible 3D glasses, viewing 3D programming requires the following (which are not included): • Compatible 3D p layback device or 3D source.
35 Chapter 6: Basic features Using the 3D glasses Each part's name and function: To set the 3D gl asses: 1 When you use for the first time, peel off the protective films from the lenses .
36 Chapter 6: Basic features To remove the battery: Drain the b attery before disassem bling. Note: This is an explanation for disp osal of the 3D glasses, not for modification.
37 Chapter 6: Basic features Using 3D functions Incoming video signals can either be in 2D or 3D format. A 2D signal can be vi ewed in either 2D or 3D, and 3D can be viewed in either 2D or 3D. If the TV can detect the fact that a signal is 3D, it can change to 3D mode automatic ally – see “3D Auto Start” ( - p.
38 Chapter 6: Basic features To switch to 3D mode: •S e t 3D Auto S tart to 3D . • Press and select 3D while viewing 2D mode or Native mode. * Correct 3D image To select 3D format fro m the Quick menu in 3D mode: 1 > 3D S ettin g s > . 2 Press B or b to select 3D Format S elect .
39 Chapter 6: Basic features To switch to Nati ve mode: • Press while viewing 3D mode. • Press while viewing 2D to 3D mode. Note: When 3D format signal with 3D Auto Detect Information is received, it is not possible to sw itch to Native. • From the Quick me nu in 2D mode.
40 Chapter 6: Basic features Setting the 3D Lock When this f eature is se t to On , you must enter 3D PIN code for changing display mode to 3D mode or 2D to 3D mode. 1 > S ettin g s > PREFER ENCE S > 3D S etup > . 2 Press B or b to select 3D S afety S ettin g s .
41 Chapter 6: Basic features Tuning channels Setting the Channel Tuning Mode You can select how tuning is handled for analog and digital channels wh en the TV is in Antenna mode. Note: To use this feature, ANT/CABLE In must be set to Antenna ( - p. 30).
42 Chapter 6: Basic features Elements of the Channel B rowser ™ 1 Channels stored in the History List 2 Channel or in put that is current ly highlighted in the browser 3 Inputs or channels labels 4 .
43 Chapter 6: Basic features Using Channel Return You can switch between tw o channels withou t entering a channel number each time. This feature also works for external inputs. 1 Select the first channel you want to view. 2 Select a second channel using the Channel Number buttons (and the dash ( ) button if needed).
44 Chapter 6: Basic features Using closed captions To turn on the c losed capti on mode : 1 > S ETUP > TV S ettin g s > . 2 Press b or B to select Close d Captions S ettin g s . Press . 3 Press b or B to select Close d Captions . 4 Press C or c to select On .
45 Chapter 6: Basic features Setting the PIN code A PIN code is necessary for some menus. Note: The Parental Control and Locks menu is grayed out if no PIN has been set. Entering a new PIN code 1 > S ettin g s > PREFERENCE S > PIN S ettin g > .
46 Chapter 6: Basic features Downloading an additional rating system In the future, an additional rating system may becom e available for use in selectivel y blocking TV progra ms and movies. Note: The currently tuned station must be receiving a digital signal before an additional rating system can be downloaded.
47 Chapter 6: Basic features Note: • If you place an “ 5 ” in the box next to “ Rated “None” ”, programs rated “ None ” or “ Not Rated ” will be blocked; Programs that do not provide any rating information will not be blocked.
48 Chapter 6: Basic features Setting a time limit for games You can use the GameTimer ® to set a time limit for playing a video game. When the time expires, the TV locks all extern al inputs. 1 > S ettin g s > PREFER ENCE S > Parental Control an d Locks > .
49 Chapter 6: Basic features Controlling HDMI ® CEC playback devices With your TV’s remote control, you can control the connected HDMI ® CEC playback devi ce (DVD player , etc.) you are watching. Availab le re mote co ntrol k ey func tions: Before using these key fu nctions, set the MODE SELECT switch on the remote con trol to TV .
50 Chapter 6: Basic features Adjusting the amplifier’s audio Using the TV’s remote contro l, you can ad just or mute the sound volu me of your amplif ier. • adjust the volume le vel. • turns off the sound. Note: This feature is available when Amplifier Control is set to On.
51 Chapter 6: Basic features Using your PC with the TV Adjusting the image If the edges of the pict ure are hidden, readjust Horizontal Position and Vertical Position . If the picture is affected by interference, readjust Clock Phase and S amplin g Clock .
52 Chapter 6: Basic features Setting the sleep timer You can set the TV to turn off after a specific amount of time (maximum = 12 hours). Using the remote control: 1 Press [ 2 Set the time until the TV turns off. • Repeatedly press [ to incre ase the time.
53 Chapter 6: Basic features Displaying TV status information To display TV status information: Press . The following inf ormation will be d isplayed (if applicable): • Current input ( ANT/CABLE , Vi d eo , etc.) • Either “CABLE” (for cable TV) or “ANT” (for over- the-air b roadcasts ), if ANT/CABLE is the current input.
54 Chapter 7: Picture and sound controls Selecting the picture size You can view many program formats in several picture sizes— Native , 4:3 , Full , TheaterW i d e 1 , The aterWi d e 2 , TheaterWi d e 3 , Normal , and Dot by Dot . Note: The picture size illustrati ons are examples only.
55 Chapter 7: Picture and sound co ntrols * To vie w the hidde n areas ( such as su btitles or captio ns), see “Scrolli ng the pict ure” ( - p. 56).
56 Chapter 7: Picture and sound co ntrols Scrolling the picture If the edges of the picture ar e hidde n, you ca n adjust the image’s position. Note: • You can adjust the picture position when the picture size is set to TheaterWi de 2 or TheaterWide 3 .
57 Chapter 7: Picture and sound co ntrols Adjusting the picture Selecting the picture mode You can select your desired picture setti ngs from the modes described below. Note: • PC mode is available for HDMI and PC inputs only (not displayed for other input sources).
58 Chapter 7: Picture and sound co ntrols Using the advanced picture settings features Note: Some of the Advanced Picture Settings features will not be available for adjustment when the Picture Mo de is set to AutoView .
59 Chapter 7: Picture and sound co ntrols ClearScan 480 ™ This feature provides smoother motion and a crisper image. 1 > S ettin g s > PICTURE > A d vance d Picture S ettin g s > . 2 Press B or b to select Clear S can 480 . 3 Press C or c to select On .
60 Chapter 7: Picture and sound co ntrols ColorMaster ™ The ColorMaster ™ feature allows you to adjust standard colors. 1 > S ettin g s > PICTURE > A d vance d Picture S ettin g s > . 2 Press B or b to select ColorMaster , press C or c to select On .
61 Chapter 7: Picture and sound co ntrols Setting Type You can adjust the white balance setting. 1 > S ettin g s > PICTURE > Expert Picture S ettin g s > . 2 Press B or b to select White Balanc e . Press . 3 Press C or c to select 2P W hite B alance .
62 Chapter 7: Picture and sound co ntrols Using the MTS button If you press when an analog channel is tuned: • The Analog Audio bar will appear and display Stereo, SAP, Mono as th e options. If you press when a digital channel is tuned: • The Digital Audio bar will appear an d offer different audio choices for the digital channel.
63 Chapter 7: Picture and sound co ntrols Using advanced sound features Using surround sound Voice Enhancemen t and Dynamic Bass Boost help to create a thrilling s urround sound exp erience with deep, rich bass from stereo sound sources. Your TV’s audio will sound fuller, richer, and w ider.
64 Chapter 8: Advanced features Using your home network • This TV is a DLNA CERTIFIED ™ Player. It can play digital content stored on a DLNA CERTIFIED ™ product with server functions. If you want to use this TV as a DLNA CERTIFIED ™ Player, you will have to configure the network settings on your TV ( - p.
65 Chapter 8: Advanced features Setting up the Network You can select the Network Type. 1 > S ettin g s > PREFERENCE S > Network S etup > . (Another : > Network > Network S etup > .) 2 Press B or b to highlight Network Type . 3 Press C or c to select Wire d or Wireless .
66 Chapter 8: Advanced features Manual Setup 1 > S ettin g s > PREFERENCE S > Network S etup > . 2 Press B or b to select Wireless S etup . Press . 3 Press B or b to select Manual S etup . Press . 4 Press B or b to select Network Name . Press .
67 Chapter 8: Advanced features Advanced Network Setup Note: • When the DHCP function o f the router connected to t his TV is On, you can set Auto Se tup to On or Off. (Usually set it to On .) • When the DHCP function o f the router is Off, set Auto Setup to Off , and manually set the IP Address or D NS Address.
68 Chapter 8: Advanced features Network Connection Test This function checks Internet connectivity. 1 > S ettin g s > PREFER ENCE S > Network S etup > . 2 Press B or b to select Network Connection Test . Press . Note: A message will appear to indicate whether the connection was successful or not.
69 Chapter 8: Advanced features Performing a Software Upgrade TOSHIBA may offer upgrades fo r the TV's software in the future. The TV's software is upg raded vi a Internet connection. Before download ing software: Configure your TV to connect to the Internet.
70 Chapter 8: Advanced features Guided Setup The first time you use Yah oo! TV Widgets t his step-by- step wizard begins with the Welcome Screen. 1 Select Let's g et starte d ! If you select Exit S etup now, this step will resume the next time you press .
71 Chapter 8: Advanced features • This TV might take time during start-up and the playback of contents. • Content that the user may feel is improper or offensive may be included in the contents of YouTube. • We do not assume any responsibility for contents that YouTube offers.
72 Chapter 8: Advanced features To close Yahoo! TV Widgets: Press . Note: • To use Yahoo! TV Widgets you must first comp lete the “Guided Se tup” ( - p. 70). • If 3D signal format with 3D Auto Detect Inform ation is received while using this fe at ure, the screen is closed.
73 Chapter 8: Advanced features Using the Media Player This TV allows you to acce ss photos, movies, and music files stored on a USB device. Moreover, you can also access photos, movies, and m u s i c f i l e s f r o m y o u r T V o r P C b y c o n n e c t i n g t h e T V t o your home network.
74 Chapter 8: Advanced features Using Media Player with DLNA CERTIFIED ™ Server You need to configure a h ome network before using this feature ( - p. 23). 1 > Settings > APPLICATIONS > Media Pla yer > . (Another : > Media Player > .
75 Chapter 8: Advanced features To set the repeat mode: 1 Press . The current repeat setting appears. 2 Press C or c to select Off , All , or 1 . 3 Press . The s etting is effective until the TV is turned off. To display the file status information: 1 Press Q during playb ack.
76 Chapter 8: Advanced features To set the repeat mode: 1 Press . The current repeat setting appears. 2 Press C or c to select Off , All , or 1 . 3 Press . The s etting is effective until the TV is turned off. To display the file status information: 1 Press Q during playb ack.
77 Chapter 8: Advanced features To set the mode settings: 1 Press to open the Quic k menu while in Single View mode or Sl ideshow mode. 2 Press B or b to select the item ( S O UND , Interval Time , Repeat , Back g roun d Mu sic , or S peakers ). 3 Press C or c to adjust the setting.
78 Chapter 8: Advanced features Using the Wallpaper feature This feature allows you t o display a photo file stored on the TV. • Only one photo file can be stored on the TV. • The photo file can be overwritten with a file from an external device (USB, DMS).
79 Chapter 9: Troubleshooting General troubleshooting Before calling a service technician, please ch eck this chapter for a possible cause of the problem and some solutions you can try. Black box onscreen • The clo s ed captio n feat ur e i s s et to o n e of the Text mode s ( T1 , T2 , T3 , o r T4 ).
80 Chapter 9: Troublesh ooting Remote control problems • E nsur e the r emote co n t r ol i s s et to the co rr ect device mode ( - p. 90). • Remove a ll ob s t ru ctio ns betwee n the r emote co n t r ol a n d the TV. • Replace the r emote co n t r ol’ s batte r ie s ( - p.
81 Chapter 9: Troublesh ooting –C o nn ect with LAN cable s , if po ss ible, a n d check co nn ec tio n s tability. – Repeat the wi r ele ss n etwo r k s et u p p r oced ur e a n d check co nn ec tio n s tability. The DMS name is not displayed • The LAN cable s , if us ed, a r e n ot co nn ected p r op e r ly ( - p.
82 Chapter 9: Troublesh ooting LED indications The POWER and Service LED lig hts on t he fron t of the TV indicate the TV’s statu s, as describ ed below. Touch Sensor (POWER LED) •B l u e The TV is operating properly. • No light The power is off or standby.
83 Chapter 10: Appendix Specifications Note: • This model complies wit h the spec ifications listed below. • Designs and s pecifications are subjec t to change without notice. • This model may not be comp atible with fe atures and / or specificat ions that ma y be added i n the futu re.
84 Chapter 10: Appendi x Supplied Accessories • Easy Setup Guide • Pedestal assembly in stalla tion manual • Stop/Quick set up guide • Remote control with two “AA” size batteries •M o u n t i n g s c r e w Use this screw to secure the TV.
85 Chapter 10: Appendi x Acceptable signal formats for PC IN, HDMI, and 3D PC IN signal formats Note: • The PC IN on this TV only accepts signal formats which are co mpliant with VESA-DMT as in the table below.
86 Chapter 10: Appendi x HDMI signal formats Note: • The HDMI inputs on this TV only accept VG A, SVGA, XGA, WX GA, and SXGA signal formats which are c ompliant with VESA-DMT as in the table below.
87 Chapter 10: Appendi x 3D signal formats* * Some contents may not be supported depe nding on the format of the input source. Resolution Aspect r atio V. F r equen cy H. F r equency Pixel Clock F r equency 3D St r uctu r e 1280 × 72 0p 16:9 23.98 Hz 17.
88 Chapter 10: Appendi x Remote control functional key chart REMOTE CONTROL KEY Toshiba TV CABLE SAT (satellite) Blu- r ay ™ DVD/ DVD-R VCR Recive r / Amp CD GAME Game --- --- --- --- --- --- --- PO.
89 Chapter 10: Appendi x Note: • “---” = key does not send a signal in that remote control mode. *1 Volu me affects the TV by default. When the volume is unl ocked, each device has its own volume if its ID has volu me data. The AUDIO modes will have their own volume if volume lock is set on TV, CABLE/SAT, VCR/PVR, or DVD mode.
90 Chapter 10: Appendi x Operating other devices Your TV remote control has on e dedicated TV mode and three programmable multi-brand modes: CABLE/ S AT , BD/DVD , and AUX . Note: To operate a non-Toshiba device or a Tosh iba device that the remote control is not preprog rammed to operate, you must program the remote.
91 Chapter 10: Appendi x Searching for a device code If you do not know the devi ce code for a particular device, you can view each ava ilable code for that device mode and sample th e functions to f ind the code th at operates the target device. 1 Press a mode select button on the remo te.
92 Chapter 10: Appendi x Operating the TV with combination buttons You can directly operate the TV power, input switch, picture size switch, and picture mode switch by pressing a combination bu tton while holding do wn a color button.
93 Chapter 10: Appendi x Remote control codes In some cases, you may not be able to operate your device with the TV remote control. Your device may use a code that is not recognized by the TV remote control. If this happens, use the device’s remote control.
94 Chapter 10: Appendi x Blu-ray Disc ™ DVD SCIENTIFIC ATLANTA 0045, 00 63, 0045 SIGNAL 0036 SIGNATURE 0078 SL MARX 0036 STANDARD 00 32 STAR SIGHT 0047 STAR TRAK 0058 STARCOM 00 81, 0123 STARGATE 0 .
95 Chapter 10: Appendi x DVD Recorde rs LITEON 1109, 1118, 1015 MAGNAVO X 1061, 1130, 1117, 11 31, 1158, 11 77, 1178 MARANTZ 1061 , 1093, 1130, 10 77, 1078, 11 57, 1158, 11 67, 1176 MEDION 1015, 1048 .
96 Chapter 10: Appendi x VCR SONY 108 4, 1083, 1089 SYLVANIA 1117 SYMPHONIC 1 117 TIVO 1062, 1125 , 1126, 11 26 TOSHIBA 1062, 10 61, 1106, 11 07, 1108 TRUTECH 1063 YAMAHA 1 018, 1131 ZENITH 1093 Bran .
97 Chapter 10: Appendi x CD NEC 2024, 2011, 2012, 20 81, 2034, 20 50, 2017, 20 21, 2020 NEXXTECH 2042 NIKKO 2033 NOBLEX 2007 OLYMPUS 2046 OPTIMU S 2033, 2007 , 2014, 20 33, 2063, 20 14, 2062 OPTONI CA.
98 Chapter 10: Appendi x Receiver & amp HARMAN KARDON 3013 HITACHI 3037 INSIGNIA 3078 JC PENNEY 3033, 3000 JVC 3008, 3007 KENWOOD 3046, 30 28, 3027, 30 26, 3029, 30 28 KRELL 3043 LUXMAN 3031, 3059.
99 Chapter 10: Appendi x Limited United States Warranty for LCD Televisions Toshiba America Inform ation Systems, Inc. (“TAIS”) makes the following limited warranties to original c onsumers in the United States.
100 Chapter 10: Appendi x THE EXCEPTION OF ANY WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE U. S.A. AS HERE BY LIMITED, THE FOREGOING LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF A LL OTHE R WARRANTIE S, GUARANTEE S, AGREEMENTS, AND SIMILAR OBLIGATIONS OF TAI S WITH RESPECT TO THE REPAIR OR REPLACEMENT OF ANY PARTS.
101 Chapter 10: Appendi x (4) Removal and reinstallation of produ ct that is mounted in such a manner as to im pede normal service is not covered under these warranties. This includes wall mounts, custom cabinets and other installation methods that do not provide for direct and immediate acce ss to the product for service purposes.
102 Chapter 10: Appendi x of the Related Parties arising out of, or otherwise relating to: (i) this warranty; (ii) the Television; (iii) any oral or written representations, statements, broc hures, pr.
103 Chapter 10: Appendi x THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING CONDITION S: (1) You must provide your original bill of sale or other proof of purchase.
104 Chapter 10: Appendi x Critical Applications The 3D Gla sses you h ave purchas ed are not des igned for any “critical applications.” “Critical applications” mea ns life support systems , me.
105 Index Numerics 3D format ......... .............. .............. ... 37 3D functions 3D Lock ............... .............. ...... 40 3D PIN ................. .......... .......... 39 3D Start Messa ge .................... 39 3D Timer Lock .......
Corporate Headquarters: 9740 IRVINE BL VD. IRVINE, CA 92618 VISUAL PRODUCTS SERVICE AND SUPPOR T : 1420-B TOSHIBA DRIVE, LEBANON, TN 37087, U.S.A. MANUF ACTURED BY HEAD OFFICE: 191 McNABB STREET , MAR.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Toshiba 46UL610U c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Toshiba 46UL610U - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Toshiba 46UL610U, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Toshiba 46UL610U va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Toshiba 46UL610U, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Toshiba 46UL610U.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Toshiba 46UL610U. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Toshiba 46UL610U ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
