Manuel d'utilisation / d'entretien du produit 42L6200U 47L6200U 55L6200U 47L7200U 55L7200U du fabricant Toshiba
Aller à la page of 206
GMA300007011 3/12 Note: T o display a High Definition picture, the TV must be receiving a High Definition signal (such as an over- the-air High Defini tion TV broadcast, a High Definition digit al cable program, or a High Definition digit al sate llite program).
2 Dear Customer , Thank you for purchasing this T oshiba LED TV . This manual will help you use the many exciting features of your new LED TV . Before operating your LED TV , carefully read this manual completely .
3 Important Safety Instructions 1) Read these instructions . 2) Keep these instructions . 3) Heed all war nings . 4) Follow all instru ctions . 5) Do not use this apparatus near water . 6) Clean only with dry cloth . 7) Do not block any ventilation openings .
4 24) When selecting a locati on for the TV , • NEV ER allow any part of the TV to hang over the edge of the suppor ting furniture, • NEV ER place the TV on tall furnit ure (f or example, ente rta.
5 38) WA R N IN G : RISK OF ELECTRIC SHOCK! Never spill liquids or push objects of any kind into the TV cabinet slot s. 39) During a lightening storm, do not touch the connecting cabl es or prod uct.
6 Removing the Pedest al St and 1) Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand prot rud ing over the edge of the surface. Note : Extreme care should always be used when removing the pedest al stand to avo id damage to the LCD pa nel.
7 Children and teenagers may be more suscep tible to health issues associated with viewing in 3D and should be closely supervised to avoid prolonged viewing without rest. • Watching TV while sitting too close to the screen for an exten ded period of time ma y cause ey e strain.
8 FCC Radiation Exposure St atement : This equipment complies with FCC radiat ion exposure limits set forth for an uncon trolled environment. This equipment should be inst alled and operated with minimum distance 20cm between the radiator & your body .
9 T rademark Information • Cinema Se ries, Cl earScan, ColorS tream, Dyna light, GameTimer , Nativ e Mode, Surflock, and Trivector are trademarks or r egistered tradem arks of T oshiba A merica Information S ystems, Inc. and/or T oshiba Corporat ion.
10 Copyright This guide is copyrighted by T oshiba America Information Systems, Inc. with all right s reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of T os hiba. No patent li ability is assumed, however , with respect to th e use of the information contained herein.
11 Contents Chapter 1: Introduction ... ......................... ..................... ............. 20 Features ..................................................................21 Overview of installation, setup, and use ..................22 TV front and side panel c ontrols and connections .
12 Contents LAN cable ..........................................................30 About the connection illustrations ....................30 Connecting an antenna, satellite receiver, and cable TV box ..................................................
13 Contents Initial setup ............................................................. 51 Performing the initial setup ............................... 52 IR Blaster Setup ......................................................55 Network Setup ........
14 Contents Enter a new PIN code ........................................ 81 Change or delete your PIN code ........................82 Forgotten PIN codes .........................................82 Setting the 3D start message .......................
15 Contents HDMI ® CEC Control input source selection .....100 Adjusting the amplifier’s audio ........................ 100 Other HDMI ® CEC Control functions ............... 101 Using the HDMI® RGB Range feature .................. 101 Viewing the HDMI® signal information .
16 Contents Static Gamma .................................................118 ClearScan ® ......................................................118 Cinema Mode ..................................................119 MPEG NR ............................
17 Contents Advanced Network Setup ................................136 DNS Setup ......................................................137 Network Connection Test ................................139 Using the software keyboard ........................
18 Contents Toshiba A/V Remote App ......................................171 Initial setup ..................................................... 172 Controlling devices .........................................173 Mouse control .......................
19 Contents Video/audio input ............................................193 ColorStream® (component video) HD input ... 193 HDMI® input .................................................. 193 Digital audio output ...................................
20 Chapter 1 Introduction Safety icons This manual contains safety instructions that must be observed to a void potential hazards that could result in personal injuri es, damage to your equipment, or loss of data.
21 Introduction F eatur es Features ❖ Integrated digital tuning (8VSB A TSC and QAM) — Eliminates the n eed for a separate d igital con verter set-top box (in most cases).
22 Introd uction Overview of installation, setup, and use ❖ 3D capability —Allows you to vie w and experience 3D content on the tele vision while using special glasses. ❖ ENERGY ST AR ® qualified Overview of installa tion, setup, and use Follo w these steps to set up you r TV and begin using its many exciting features.
23 Introduction TV fr ont and side panel con tr ols and connections on, unplug the power cords for a fe w seconds and then plug them in and try again. 9 See “Navigating the menu system” on page 61 for a quick ov erview of na vigating the TV’ s menu system.
24 Introd uction TV bac k panel contr ols and con nections 5 IR Blaster OUT —Used to connect and control infrared remote-controlled devices. 6 Digital A udio Jack —Opti cal audio outpu t in Dolby .
25 Introduction TV bac k panel contr ols and con nections Back panel controls 1 PO WER —T urns the TV On and Off . 2 VO L + - —Adjusts the volume le vel. When an onscreen menu appears, these keys function as ( / ) menu navigation buttons. 3 CH Up/Down arrow b u ttons —Changes the channel.
26 Introd uction TV bac k panel contr ols and con nections 15 Analog A udio OUT —Analog audio outputs fo r connecting an audio amplifier . 16 Digital A udio O UT —Optical audio outp ut in Dolby ®.
27 Chapter 2 Connecting Y our TV Overview of cable types Before purchasing cables, know the connector types your de vices require. Y ou can purchase cables from most stor es that sell audio/video devices.
28 Connecting Y our TV Overview of cable types video, red for stereo right audio, and white for stereo left (or mono) audio. Component video cables (red/green/blue) (Sample Illustration) Componen t video cables Component video cables come in sets of three and are for use with video devices with component video ou tput.
29 Connecting Y our TV Overview of cable types Dual-wand IR blaster cable Connect the dual-wand IR blaster cable to the IR blaster terminal to control infrared remote cont rolled devices from the TV .
30 Connecting Y our TV Connecting an anten na, satellite r eceiver , and cable TV box Crossov er LAN cable connects the TV directly to a computer , see “Connecting the TV directly to a computer wit hout an Internet connection” on page 43 .
31 Connecting Y our TV Connecting D VD to ColorStr eam ® or VCR to composite video T o view the VCR or camcorder video: T urn On the VCR or cam corder video. Select VIDEO input source on the TV .* *T o select the video inpu t source, press the INPUT button on the remote control, see “Selecting the video input to view” on page 86 .
32 Connecting Y our TV Connecting r emote IR devices ❖ If your D VD player or sa tellite recei ver does not hav e component video, connect a standard A/V cable to the A UDIO/VIDEO termin al. If your D VD player has HDMI ® video, see “Connecting an HDMI® or D VI de vice to the HDMI® input” o n page 35 .
33 Connecting Y our TV Connecting r emote IR devices ❖ Dual-wand IR blaster cable (see “Dual-wand IR blaster cable” on page 29 ) ❖ Other cables as required to connect the device(s) to the TV (see “Overvie w of cable types” on page 27 ) See the remote I R blaster setup section .
34 Connecting Y our TV Connecting a digital audio system Point the TV remot e control toward the front of the TV and press the button for the desired function. The signal passes from the remote control throug h the TV to the device via the IR Blaster cable.
35 Connecting Y our TV Connecting an HDMI® or D VI device to the HDMI® input use with an external Dolby Digital decoder or other external audio system with optical audio input. Y ou will need an Optical audio cable (Use an optical audio cable that has the larger “T osLink” connector and not the smaller “mini-optical” connector .
36 Connecting Y our TV Connecting an HDMI ® or D V I device to the HDMI® input uncompressed digital video from a D VI (Digital V isual Interface) source de vice.
37 Connecting Y our TV Using the TV r e mote and HDMI® CEC Contr ol to contr ol other more information, see “Selecting the video input to vi e w ” on page 86 . T o connect a D VI device, y ou will need : ❖ HDMI ® to D VI adapter cable For proper operation, the length of an HDMI ® to D VI adapter cable should not exceed 9.
38 Connecting Y our TV Connecting an HDMI ® audio system T o connect an audio receiv er and playback devices, you will need HDMI ® cables, see “HDMI ® cable (with HDMI Logo)” on page 28 . If several devices are connected, HDMI ® CEC Control feature may not operate properly , see “HDMI ® CEC Control input source selection” on page 100 .
39 Connecting Y our TV Connecting a computer Y ou will need and HDMI ® cable. (Sample Illustration) L6200U/L7200U Series— Connecting to HDMI ® ARC HDMI ® 's ARC (Audio Return Channel) feature This feature enables the audio signal of the TV to be sent to an A V amplifier via the HDMI ® cable.
40 Connecting Y our TV Connecting a computer Connecting a computer to t he TV’ s PC IN terminal: When connecting a computer to the PC IN terminal on the TV , use an analog RGB (15-pin) computer cable and a PC audio cable. For more information, see “Overvie w of cable types” on page 27 .
41 Connecting Y our TV Connecting a computer ❖ The PC audio input terminal on the TV is shared with the HDMI 4 and ColorStream ® HD2 terminal. For configuration information, see “Setting the computer audio” on page 103 . ❖ Some computer models cannot be connected to this TV .
42 Connecting Y our TV Connecting to a home net work For more information, see “Overvie w of cable types” on page 27 . (Sample Illustration) L6200U/L7200U Series—Connecti ng to an HDMI ® terminal The supported signal formats are VGA, SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p (60H z), 720p (60Hz), 1080i (60H z), and 1080p (24Hz/60Hz).
43 Connecting Y our TV Connecting to a home network Connecting the TV directly to a com puter without an Internet connection Y ou will need a Crossover LAN cable.
44 Connecting Y our TV Connecting to a home net work Connecting the TV to a home network with an Internet connection - wired Items needed: ❖ Coaxial or telephone cable (dependin g on your modem type.
45 Connecting Y our TV Connecting to a home network ❖ W ireless LA N access point or wireless router ❖ Modem (DSL or cable) (Sample Illustration) L6200U/L7200U Series—Connecti ng with Internet c.
46 Chapter 3 Using the Remote Control Controlling other devices The TV’ s remote control can operate other de vices as described in the IR Blaster section on page 55 . Installing batteries T o install batteries: 1 Pull up to o pen the cover . (Sample Illustration) Removing the battery cover 2 Install two AA size batteries.
47 Using the Remote Control Installing batteries Use carbon zinc batteries or alkaline batteries. (Sample Illustration) installing th e batteries 3 Slide on the cover . Do not expose batteries to excessive heat such as s unshine, fire, etc. ❖ Every time you change the batteries, you must reprogram the remote.
48 Using the Remote Control Remote contr ol effective range Remote control effective range 1 For optimum performance, aim th e remote control directly at the TV and make sure there are no obstructions between the remote control and the TV . (Sample Illustration) Re mote contr ol effective rang e 16.
49 Using the Remote Control Learning about the remote contr ol Learning about the remote control Only the buttons used to operat e the TV are described in this section. For the HDMI ® CEC Control functions, see “Using HDMI ® CEC Control” on page 97 .
50 Using the Remote Control Learning about the r emote contr ol The error message “NOT A V AILABLE” may appear if you press a key for a function that is not available. NOTE 1 POWER button T u r n s the TV On and Off. When the TV i s on, the powe r LED indi c ato r on the TV f r ont glow s g r een.
51 Chapter 4 Initial Setup and Menu Initial setup When you f irst turn on or reset the TV , the In itial Setup wind ow appears. ❖ Y ou can stop Initial Setup by pressing the EXIT button. However , if you do not finish Initial Setup, the Initial Setup screen will appear every time you turn on your TV .
52 Initial Setup and Menu Initial setup Performing the initial setup 1 Menu Language/Country Select a language and country . Press OK . (Sample Illustration) Selecting Menu Language/Country 2 Time Zone Select a time zone. (Sample Illustration) Selecting T ime Zone 3 Daylight Sa ving Time Select On or Off .
53 Initial Setup and Menu Initial setup 5 ANT/CABLE T o select Antenna , first select Antenna . Then select Next. (Sample Illustration) Selecting Antenna T o select Cable , first select Cable . Then select Next . (Sample Illustration) Selecting Cable If you do not want to scan channels, you do not need to make a selection for ANT/CABLE.
54 Initial Setup and Menu Initial setup While scanning is in progress, the Auto T uning Progress Screen appears. (Sample Illustration) Auto T uning Pr ogress Scr een After scanning is complete, the auto tuning results screen (such as the one below) will appear .
55 Initial Setup and Menu IR Blaster Setu p 4 Scan again. IR Blaster Setup During the Initial Setup, the IR B laster screen will appear w ith the message, “IR Blaster setup will no w begin. If you wish to skip, please select Skip. ” T o start the IR Blaster setup, select Next on the screen, or to skip the setup, select Skip .
56 Initial Setup and Menu IR Blaster S etup If a model has more than one Code Set, a message will appear stating “This model has more than one Code Set. Please select and test your preferred Code Set.” Y ou will need to choose a code set using the ( / arrow) buttons and perform the T est option to ensure the correct Code Set has been selected.
57 Initial Setup and Menu IR Blaster Setu p If Audio is selected as the device type, the volume option is active. However if another device (other than Audio) is selected, then this option is not available and grayed out.
58 Initial Setup and Menu Network Setup 3 Select the Te s t button. A message screen will appear asking you “W as your device changed from one channel to anothe r by the IR blaster? If not, please check your configuration. ” If the test failed, a “T est Failed” message will appear on the screen.
59 Initial Setup and Menu MediaGui de Setup 2 Using the ( / arrow) buttons, select the type of W irele ss setup option: Easy Setup (WPS), Assisted Setup, or Manual Setup. ❖ Easy Setup (WPS). If your Access Point (AP) supports WPS, this method can be used.
60 Initial Setup and Menu MediaGuide Setup 1 Make sure the TV is connected to the network, and then select the Ye s or No button using the ( / arrow) b uttons. Then press the OK button. The TV will now establish connection with the information services it uses.
61 Initial Setup and Menu Navigating the menu system Refer to this information if there is a problem and you need to contact Customer Support. T o find help, the following operation can be performed at any time. MENU button > Menu > GET HELP > System Informa tion > OK button.
62 Initial Setup and Menu Main menu layout Main menu layout T o open the main m enus in the table below , press the MENU button on the remote control or TV control panel.
63 Initial Setup and Menu Quic k Menu Quick Menu Quick menu helps you access so me options more quickly . Press the QUICK button to display the Quick m enu and press the ( / )buttons to select an optio n. Quick menu items differ depending on the current mode.
64 Chapter 5 Setting up your TV How to navigate the menu ❖ Press the MENU button. Select SETTINGS , Main menu, Submenu, and then press the OK or EXIT b utton. Changing initial settings From Qu ick Setup: 1 Press the MENU b utton. 2 Select SETTINGS , SETUP , Quick Setup , and then press t he OK button.
65 Setting up your TV How to navigate the menu 3 Press the ( / arrow) b utton s to select Ye s . 4 Press th e OK but to n . T o change settings, see “Initial setup” on pa ge 51 . Individual settings Menu Language Y ou can choose from three different menu language settings (English, Français, and Español) .
66 Setting up you r TV How to navigate the menu 3 Press the ( / arrow) b utton s to select Home . 4 Press the OK b utton. ANT/CABLE In This setting configures the antenna input source for the ANT/CABLE terminal. 1 Press the MENU b utton. 2 Select SETTINGS , SETUP , and then ANT/CABLE In .
67 Setting up your TV How to navigate the menu T o tune to channels not stored in memory , use buttons 0–9 and the DASH button on the remote control. 1 Press the MENU b utton. 2 Select SETTINGS , SETUP , A uto T uning , and then press t he OK button.
68 Setting up you r TV How to navigate the menu Skipping channels T o prev ent a channel from being viewed, you can set it to be skipped. 1 Press the MENU b utton. 2 Select SETTINGS , SETUP , TV Settings , and then press t he OK button. 3 Press the ( / arrow) b uttons to select C hannel Options , and then press th e OK button.
69 Setting up your TV How to navigate the menu 2 Select SETTINGS , PREFERENCES , A V Connection , and then press th e OK button. 3 Press the ( / arrow) b uttons to select Input Labeling . 4 Press th e OK but to n . 5 Press the ( / arrow) b uttons to select the item you wish to skip.
70 Setting up you r TV How to navigate the menu Labeling video inputs The input labels are shown in the input selector and banner displays. Y ou can label video inpu ts according to the devices you hav e connected to the TV . 1 Press the MENU b utton.
71 Setting up your TV How to navigate the menu Auto Input settings options for each MODE SELECT button: The TV mode select button will be restricted to the ANT/CABLE input. T o set Auto Input 1 Press the MENU b utton. 2 Select SETTINGS , PREFERENCES , Mode Select Ke y Setup , and then press t h e OK button.
72 Chapter 6 Basic features Viewing 3D images Before using the 3D function, note the fo llo wing: In addition to compatible 3D glasses, viewing 3D programming requires the following (not included): ❖ Compatible 3D playback device or 3D source. ❖ 3D capable HD M I ® cable.
73 Basic features V iewing 3D imag es Health precautions: ❖ Due to the possible impact on vision development, viewers of 3D programming should be age 6 or above. Children may be more susceptible to health effects from viewing 3D images and should be closely supervised.
74 Basic features Using 3D functions Watching the TV: ❖ Proper 3D effects or 3D-to-2D conversion results may not be obtained depending on the received 3D conte nt. ❖ 3D effect and image quality may vary depending upon content quality and display device cap ability/ functionality/settings.
75 Basic features Using 3D functions ❖ In order to switch to 3D, the TV must be receiving a 3D signal. ❖ If appropriate mode and format are not selected, 3D image is not correctly displayed. ❖ If the appropriate 3D mode and format a re not selected, the 3D image will not display correctly .
76 Basic features Using 3D functions Switching display mode or selecting 3D format There are four TV viewing modes: 3D signals can be sent in one of three formats: * This format cannot be selected manually . ❖ If the right and left images are the same in Nati ve mode, select SBS.
77 Basic features Using 3D functions When viewing 3D mode or 2D to 3D mode, pressing the 3D button changes the viewing mode to Native mode. Switching to 3D mode ❖ Set 3D Auto S tart to 3D . ❖ Press the 3D b u tton and select 3D while viewing 2D mode or Nativ e m ode.
78 Basic features Using 3D functions Selecting 3D format from the Quick menu in 3D mode 1 Press the QUICK button. Select 3D Setting s , and then press the OK button. 2 Press the ( / arro w) buttons to select 3D F ormat Select , and then press the OK button.
79 Basic features Using 3D functions Switching to 2D mode 1 Set 3D Auto S tart to 2D . 2 Press the 3D b u tton while viewing 3D mode. * Correct 2D image. Selecting 2D format from the Quick menu in 2D mode 1 Press the QUICK button. Select 3D Setting s , and then press the OK button.
80 Basic features Using 3D functions * Correct 2D image. T ake off the 3D glasses in 2D mode Switching to Native mode Press the 3D b utto n while viewing 3D mode. Press the 3D b utto n while viewing 2D to 3D mode. When 3D format signal with 3D Auto Detect Information is received, it is not possible to switch to Native.
81 Basic features Setting the 3D PIN code T o switch 2D to 3D mode ❖ Press the 3D b utto n and select 2D to 3D while viewing 2D or Nativ e m ode. When using A TV , Video, ColorS tream HD, Internet, or PC, the viewing mode can be changed to 2D to 3D mode by pressing 3D.
82 Basic features Setting the 3D PIN code the PIN code cannot be set to “0000.” Change or delete your PIN code 1 Press the MENU button. 2 Use the ( / arrow) b uttons to select 3D , and then press the OK button. 3 Press the ( / arrow) b uttons to select 3D PIN .
83 Basic features Setting the 3D PIN code 6 Press the ( / arrow) b utton s to select On or Off . Setting the 3D Lock When this feature is set to On, you must enter your 3D PIN code t o change the displ ay mode to 3D mode or 2D to 3D mode. 1 Press the MENU button.
84 Basic features Setting the 3D PIN code 1 Press the MENU button. 2 Use the ( / arrow) b uttons to select 3D , and then press the OK button. 3 Press the ( / arrow) b uttons to select 3D Safety Settings , and then press the OK b utton. 4 Enter your 4-digit 3D PIN code.
85 Basic features T uning Channels Switching left and right images The left and right images of the glasses can be swapped. If 3D images look blurry , switch the left and right sides of the 3D image. 1 Press the QUICK bu t to n to open the Quick menu.
86 Basic features Selecting the video input to vie w T o temporarily program the CH R TN button with a particular channel: 1 T une to the chann el you wish to program to the CH RTN button. 2 Press and hold the CH R TN button for approximately 4 seconds until the message “Memorized” appears.
87 Basic features Using closed captions ❖ Y ou can label the video input sources according to the specific devices you have connected to the TV , see “Labeling video inputs” on page 70 . ❖ Y ou can skip sources, see “Skipping video inputs” on page 68 .
88 Basic features Using closed captions T o view captions or text: 1 Press the MENU button. Select SETTINGS , SETUP , TV Settings , and then press the OK button. 2 Press the ( / arrow) b uttons to select Closed Captions , and then press the OK button.
89 Basic features Using closed captions T o view text: Press the ( / arrow) b uttons to highlight T1 , T2 , T3 , or T4 . (Sample Illustration) Captions - text If text is not available in your area, a black rectangle may a ppear on the screen. Y ou can remove this rectangle by setting Closed Captions Display to Off.
90 Basic features Using closed captions T o customize the closed captions: 1 Press the MENU button. Select SETTINGS , SETUP , TV Settings , and then press the OK button. 2 Press the ( / arrow) b uttons to select Closed Captions , and then press the OK button.
91 Basic features Using par en tal contr ol s Entering a new PIN code 1 Press the MENU button. Select SETTINGS , PREFERENCES , Paren ta l PI N , and then press the OK button. 2 Use the number buttons to enter a 4-digit number , and then confirm the code.
92 Basic features Using par ental contr ols The V-Chip fea ture in this TV supports the U.S. V- Chip system only . 1 Press the MENU button. Select SETTINGS , PREFERENCES , Pare ntal Contr ol and Locks , and then press the OK button. 2 Enter your 4-digit PIN cod e.
93 Basic features Using par en tal contr ol s 5 Press the ( / arrow) b uttons to select Edit Rating Li mits , and then press the OK button. The Edit Rating Limits screen appears. 6 Select Alt RS , and then press the OK button. The Edit Alternate Rati ngs screen appears.
94 Basic features Using par ental contr ols Independent rating system for movies Indication other than rating system If you place an “X” in the box next to “Rated “None””, programs rated “None” or “Not Rated” will be blocked; Programs that do not provide any rating information will not be blocked.
95 Basic features Locking specif ic channels Displaying ratings T o display the rating of the program you are watchin g, press the INFO button on the remote control. Unlocking programs If you try to tune to a program that exceeds the rating lim its you hav e set, the TV w ill enter pr ogram lock mode and a warning message will appear on screen.
96 Basic features Locking specif ic channels Locking video inputs Y ou can lock video input s and channels 3 and 4. Y ou cannot view the input sources or channels until you unlock th e inputs by entering the PIN code. 1 Press the MENU button. Select SETTINGS , PREFERENCES , Pare ntal Contr ol and Locks , and then press the OK button.
97 Basic features Using HDMI ® CEC Contr ol ❖ A message appears when 10 minutes, 3 minutes, and 1 minute are remaining. ❖ If the TV loses power with time remaining, the TV will e nter Input Lock mode when power is restored (as if the GameT imer had been activated).
98 Basic features Using HDMI ® CEC Contr ol T o set HDMI ® CEC Control Setup 1 Press the MENU button. Select SETTINGS , PREFERENCES , HDMI ® CEC Contr ol Setup , and then press the OK button. 2 Press the ( / arrow) b uttons to highlight Enable HDMI CEC Control .
99 Basic features Using HDMI ® CEC Contr ol These functions depend on the connected devices. HDMI ® CEC Player Control menu functions 1 Press the QUICK button to open the Quick men u. 2 Select HDMI ® CEC Player Control , and then press the OK button.
100 Basic features Using HDMI ® CEC Contr ol These functions depend on the connected devices. The HDMI ® CEC Player Control item is not available under the following conditions: ❖ A non-HDMI ® in.
101 Basic features Using the HDMI® R GB Range f eatur e Other HDMI ® CEC Control functions When Enable HDMI ® CEC Control and all items in the HDMI ® CEC Control Setup menu are set to On, the fo l.
102 Basic features V iewing the HDMI® signal information If your HDMI ® connection is capable of 1080p and/or your TV is capable of refresh rates greater than 60 Hz, you will need a High Speed HDMI ® cable. Conventional HDMI ® / DVI cables may not work properly with this mode.
103 Basic features Using your computer with the TV 3 Press the ( / arrow) b uttons to select PC Settin gs , and then press the OK button. If a computer is not connected or there is no PC input signal, this menu will not be available. 4 Press the ( / arrow) b uttons to select an item.
104 Basic features Setting the timer to turn on the TV Setting the timer to turn on the TV Y ou can set the on timer to turn on the TV to a preset channel or input at a preset time. T o activ ate the timer: 1 Press the MENU button. Select TIMERS , On Ti mer , and then press the OK button.
105 Basic features Setting the sleep timer 2 Press the ( / arrow) b uttons to select Enable On Timer . 3 Press the ( / arrow) b uttons to select Off . Setting the sleep timer Y ou can set the TV to turn off after a specif ic amount of time (maximum = 12 hours).
106 Basic features Setting No Signal P ower Down Setting No Signal Power Down When an input's setting in this feature is set to On, The TV will automatically turn it self off after 15 minutes if no signal is detected.
107 Basic features V iewing support informatio n ❖ Channel Label (if set or recei ved) ❖ Current display mode (Side by Side, T op and Bottom, or Frame Packing) ❖ Current display format (2D to 3D, or 3D to 2D) ❖ Input video format (3D appears when video format is 3D) T o close the screen, press the INFO b utton again.
108 Basic features P ower failur e ❖ Press the ( / arrow) b uttons to select No , and then press the OK button. Power failure If power is lost while you are watching the TV , the Last Mode Memory feature automatically tu rns on the TV when power is restored.
109 Chapter 7 Picture and Sound Controls Selecting the picture size Y ou can view many program formats in se veral picture sizes— Nati ve, 4:3, Full, TheaterW ide 1, TheaterW ide 2, TheaterW ide 3, Normal, and Dot by Dot. The picture size illustrations are examples only .
110 Picture and Sound Control s Selecting the pictur e size ❖ Using these functions to change the picture size (i.e., c hanging the height/width ratio) for any purpose other than your private viewing may be prohibited under the Copyrigh t Laws of the United States and other countries, and may subject you to civil and criminal liability .
111 Picture and Sound Control s Selecting the picture size 4:3 (Sample Illustration) Picture size - 4:3 Some program formats will display wi th sidebars and/or bars at the top and bottom . Full This setting is for viewing in the 16:9 (480 i, 480p) source pro grams only .
112 Picture and Sound Control s Selecting the pictur e size TheaterWide 1 This setting is for vi e wing in 4:3 format programs. (Sample Illustration) Pict ure size - TheaterW ide 1 The center of the picture remains cl ose to its original proport ions, but the left and right edges ar e stretched horizontally to fill the screen.
113 Picture and Sound Control s Scr olling the pictur e Normal This setting is for vie wing SVGA, XGA, WXGA, and SXGA sources. (Sample Illustration) Picture size - Normal This size is a non-stretched display . Some input sign al formats will display with sidebars and/or bars at the top and bottom.
114 Picture and Sound Control s Using the A uto Aspect featur e 2 Press the ( / arrow) b uttons to select Picture P osition , and then press the OK button. 3 Press the ( / arrow) b uttons to select V ertical P osition . 4 Press the ( / arrow) b uttons to make the appropriate adjustments.
115 Picture and Sound Control s Adjusting the pictur e Adjusting the picture Selecting the picture mode Y ou can select your desired picture settin gs from the modes described below . PC mode is available for HDMI ® and PC inputs only (not displayed for other input sources).
116 Picture and Sound Control s Adjusting the pictur e * Backlight: Adjust s the brightness of th e entire screen. When in video mode and no signal is input, this selection is set to 0.
117 Picture and Sound Control s Using the advanced pictur e settings featur es Using the advanced picture settings features Some of the Advanced Picture Settings features will not be available for adjustment when the Picture Mode is set to AutoView .
118 Picture and Sound Control s Using the advanced picture settings featur es When the Picture Mode is set to Au toView, the level range is from -5 to +5. DynaLight ® The DynaLight ® feature automatically strengthens the black coloring of dark areas in the video according to the le vel of darkness.
119 Picture and Sound Control s Using the advanced pictur e settings featur es Cinema Mode This feature provides smooth er motion and a cris per image. 1 Press the MENU button. Select SETTINGS , PICTURE , Advanced Pictur e Settings , and then press the OK button.
120 Picture and Sound Control s Using the advanced picture settings featur es The differences may not always be notic eable. For the best results, use lower settings, as picture quality may be greatly reduced if the setting is too high. If the picture mode is set to Gam e or PC, this feature is not available.
121 Picture and Sound Control s Using the advanced pictur e settings featur es 6 Press the ( / arrow) b uttons to adjust the lev el. The adjustment range is from 0 to 100. (Sample Illustration) Backlight adjustment window 7 Press the OK but to n to f ix the adju stment.
122 Picture and Sound Control s Setting the expert pictur e settings 3 Press the ( / arrow) b uttons to select a color . Press the ( arro w) button. 4 Press the ( / arrow) b uttons to select Hue , Saturation , or Brightness . 5 Press the ( / arrow) b uttons to adjust the setting.
123 Picture and Sound Control s Setting the ex pert pictur e settings 3 Press the ( / arrow) b uttons to select On . 4 Adjust picture settings. When the TV is in 3D mode, this feature is not available.
124 Picture and Sound Control s Locking the pictur e settings Setting T ype Y ou can adjust the white balance setting. 1 Press the MENU button. Select SETTINGS , PICTURE , Expert Picture Settings , and then press the OK b utton. 2 Press the ( / arrow) b uttons to select White Bal ance , and then press the OK button.
125 Picture and Sound Control s Adjusting the audio Adjusting the audio Muting the sound Press the MUTE b utton to partial ly reduce (1/2 Mute) or turn off (Mute) the sound. E ach time you press the MUTE button, the mute mode changes in the fo llowing order: 1/2 Mute, Mute, V olume, 1/2 Mute, etc.
126 Picture and Sound Control s Adjusting the audio Adjusting the range Y ou can adjust bass and treble. 1 Press the MENU button. Select SETTINGS , SOUND , and then Bass or Tr e b l e . 2 Press the ( / arrow) b uttons to adjust the range, and then press the EXIT button.
127 Picture and Sound Control s Adjusting the audio Audyssey Premium T elevision™ These televisions use a suite of technologies for better sound including: ❖ Audyssey EQ ® —pro vides clear , accurate and natural sound right out of the box. This technology ensures you enjoy your audio experience as much as your video.
128 Picture and Sound Control s Using the surr ound sound feature ❖ If Dynamic Range Control is set to On, this feature is automatically set to Off. ❖ This feature does not affect the audio signal output from the DIGIT AL AUDIO OUT terminal.
129 Chapter 8 Advanced features Using your home network ❖ This TV can share videos, music, and photos across your home network and other connected products throug h the MediaShare feature. In order to do this, you will have to conf igure the network settings on your TV , see “ePOR T AL MediaShare (V ideos, Music, and Photos)” on page 157 .
130 Advanced features Using your home network When using a Wireless network connection: Wireless LAN and your Health: W ireless LA N products, like other radio de vices, emit radio frequency electromagnetic ener gy .
131 Advanced features Setting up the Network Setting up the Network Y ou can select the Network T ype. 1 Press the MENU button. Select NETWORK > Network Setup , and then press the OK but to n . 2 Press the ( / arrow) b uttons to highlight Network T ype .
132 Advanced features Setting up the Network 4 Press the ( / arrow) b uttons to select PBC . 5 Press the ( arro w) button to select Start Scan , and then press the OK button. 6 Follo wing the on screen instru ctions, push the appropriate button on your AP .
133 Advanced features Setting up the Network Assisted Setup 1 Press the MENU button. Select NETWORK > Network Setup , and then press the OK b utton. 2 Press the ( / arrow) b uttons to select Wir eless Setup , and then press the OK button. 3 Press the ( / arrow) b uttons to select Assisted Setup , and then press the OK button.
134 Advanced features Setting up the Network 4 Press the ( / arrow) b uttons to select Network Name , and then press the OK button. The Software K eyboard window appears. 5 Input the Network Name using the Software Ke yboard. For more information, see “Using the software k eyboard” on page 139 .
135 Advanced features Setting up the Network Settings are not saved if the BACK button is pressed be fore Done is selected. Wireless Information The settings configured in Wireless Setup can be confirmed. 1 Press the QUICK button. Select Wir eless Inf ormation , and then press the OK button.
136 Advanced features Setting up the Network Even if an AP for IEEE 802.11n is used when Encryption is set to WEP or TKIP , the Speed value might be low .
137 Advanced features Setting up the Network 2 Press the ( / arrow) b uttons to select Advanced Netw ork Setup , and then press the OK b utton. 3 Press the ( / arrow) b u ttons to select IP Addres s Setup , and then press the OK button. 4 Select A uto Setup .
138 Advanced features Setting up the Network 2 Press the ( / arrow) b uttons to select Advanced Netw ork Setup , and then press the OK b utton. 3 Press the ( / arrow) b uttons to select DNS Setup , and then press the OK button. 4 Select Au t o S e t u p .
139 Advanced features Using the softwar e keyboar d 3 Press the ( / arrow) b uttons to select MA C Address , and then press the OK button. Network Connection T est This function checks Internet connectivity . 1 Press the MENU button. Select NETWORK > Network Setup , and then press the OK b utton.
140 Advanced features P erforming a Software Upgrade 3 Repeat Step 1 and 2 until you have entered all desired text. 4 Press the BLUE button to sa ve your set tings and return to the pre vious screen. If the BACK button is pressed, changes are not saved and the software keyboard window is closed.
141 Advanced features V iewing the Softwar e Licenses ❖ Y ou will not be able to use the TV set while performing the upgrade. ❖ Do not turn off the TV during the upgrade. ❖ By upgrading, the factory default values may be changed. 2 Press the MENU button.
142 Advanced features Using the SmartTV feat ur es Using the SmartTV features ❖ Y ou need to connect to the Internet before using this feature, see “Setting up the Network” on page 131 . ❖ Certain services may not be currently available in your area.
143 Advanced features Using the SmartTV featur es ❖ MediaShare (Media Player): Connected Media Servers and USB devices ❖ The Internet Performing a Search Y ou can perform a search using the SEARCH button on the remote control or the SearchAll bar on the ePOR T AL page.
144 Advanced features Using the SmartTV feat ur es ePORT AL Apps The ePOR T AL Apps can be used t o display bonus content through content service providers s uch as: ❖ Netflix ® ❖ VUDU Apps™ ❖ VUDU Movies™ ❖ Y ouT ube ® ❖ CinemaNo w ® ❖ MediaGuide ❖ eMANU AL Certain services may not be available in your area.
145 Advanced features Using the SmartTV featur es ❖ The resolution of video content streamed from Netflix ® varies depending on the communication speed and bit-rate. ❖ Future upgrades can change the screens and mess ages displayed in the Netflix ® feature.
146 Advanced features Using the SmartTV feat ur es 1 Press the MENU button. Select NETWORK > Smart A pps Setup > VUDU Deactivation , and then press the OK b u tton. 2 Press the ( / arro w) buttons to se lect Ye s , and then press the OK button. If the VUDU™ icons are not shown in the ePORT AL, you may need to update the TV firmware.
147 Advanced features Using the SmartTV featur es ❖ Y ouT ube™ content has been independently managed by Y ouT ube™, LLC. ❖ Not all Y ouT ube™ content that can be accessed by computer may be viewed with this TV . ❖ This TV may not be able to do some operations that computer can do.
148 Advanced features Using the SmartTV feat ur es search for and browse your f avorite sites, and find all the content you want, with simple, intuitive na vigat ion. The web browser on this de vice: ❖ does not support platform-dependent technologi es such as Activ eX .
149 Advanced features Using the SmartTV featur es 6 Y ou can now bro wse websites on your TV using the ( / / / arrow) b utton s on the remote control or by using the W irel ess QWER TY keyboard. Select Mouse Emulation by pressing the GREEN button on the remote control to navigate with a driverless wireless mouse (wireless mouse is not included).
150 Advanced features Using the SmartTV feat ur es Adding Favorites Websites 1 Connect to the network. 2 Press the ePOR T AL button on the remote control to access the ePOR T AL page. Pressing the INTERNET button on the remote control will also launch the web browser .
151 Advanced features Using the SmartTV featur es ❖ If using the onscreen keyboard, press the BLUE button to view the page. ❖ If using the USB/QWER TY keyboard, press the ENTER button to view the page. ePORT AL Messages Y ou can create personal messages on your TV using the Messages feature.
152 Advanced features Using the SmartTV feat ur es Edit an event 1 Select the Event in the Event list. Press OK . 2 The Edit Event windo w is displayed. Y ou can change the date, ev ent inform ation, and repeat options. ePORT AL Favorite Sites Y ou can access your fa vorite (“bookmarked”) Internet s ites from the ePOR T A L.
153 Advanced features Using the SmartTV featur es ePORT AL Preferences Use ePOR T AL Preferences to custom ize the look and feel of the ePOR T AL. From Preferences, you can: ❖ Adjust the background .
154 Advanced features Using the SmartTV feat ur es If you see an error message saying that the MediaGuide was not able to connect to the network, you should check your n etwork connections before trying again.
155 Advanced features Using the SmartTV featur es 4 In the subsequent menu s, use the ( / arrow) buttons to navigate between menu levels. The sub-menus include My Profile; Movies, Settings, TV , Search, and TV Listings.
156 Advanced features Using the SmartTV feat ur es Selecting a listing If you can select and open a TV pr ogram, mo vie, or celebrity , an Overvie w screen will appear wi th general inf ormation about the selected item. It also contains opt ions such as watch, bookmark, or see a trailer .
157 Advanced features Using the SmartTV featur es 6 Press the OK b ut ton to open the detail screen for that item. T o search all of the connected media devices across your network as well as the TV programming, use the SearchAll feature in the ePOR T AL, see “ePOR T AL SearchAll” on page 142 .
158 Advanced features Using the SmartTV feat ur es ❖ Connected Media Server: Y our computer (for example) ❖ Connectivity is not guara nteed for all devices.
159 Advanced features Using the SmartTV featur es If Auto Start is set to Off, you can start the MediaShare (Media Player) manually . Manual Start 1 Insert a USB de vice into the USB terminal. 2 Press the ePOR T AL button. Select the Vi d e o , Music , or Photos icon, and then press the OK button.
160 Advanced features Using the SmartTV feat ur es 5 T o select a file in the list of contents 1 Press the ( / / / arrow) b uttons to select a file or folder . 2 Press the OK but to n to mov e to the next layer , or press the BACK button to return to the previous layer .
161 Advanced features Using the SmartTV featur es The P AUSE button or operations during Pause may not be functional depending on content or media server . T o locate a specific file ❖ Press the Skip Re verse or Skip F orward button repeatedly to access the desired f ile.
162 Advanced features Using the SmartTV feat ur es File specifications: USB use: ❖ File f ormat: MPEG2 PS, MPEG2 TS ❖ Vi d e o : MPEG2, H.264 ❖ Au d i o : MPEG1-Layer2/MPEG1-Layer3/Dolby ® Digi.
163 Advanced features Using the SmartTV featur es The PA U S E button or operations during Pause may not be functional depending on content or media server . Certain processes may take some time to complete. T o locate a specific file: ❖ Press the Skip Re verse or Skip F orward button repeatedly to access the desired f ile.
164 Advanced features Using the SmartTV feat ur es File specifications: USB use: ❖ File f ormat: MP3, MP4 (AA C), LPCM ❖ Sampling frequency: 32 kHz, 44.1 kHz, 48 kH z ❖ Bit rate: From 32 to 320 kbps ❖ Maximum number of f iles: 1000 per folder Content on Connected Media Server: ❖ File f ormat: MP3, LPCM ❖ Sampling frequency: 32 kHz, 44.
165 Advanced features Using the SmartTV featur es ❖ Displaying thumbnail data may take time. ❖ In order to use the / arrow to scroll the screen, there must be enough content to take up two screens. Single View mode In this view mode, only files locat ed in the selected directory are displayed.
166 Advanced features Sear ch Rotate the image While viewing the image in Single V i e w mode or Slidesho w mode, press the ( / arrow) b utt ons to rotate the image 90 degrees. Return to the thumbnail Press the BACK button while in Single V iew mode or Slide Sho w mode.
167 Advanced features Network Device Setup 2 Enter in keyw ords and the search will search for: ❖ V ideos; T itle name ❖ Music; T i tle name/Artist name/ Album name ❖ Photos; Title name ❖ USB; V ideos/Music/Photos ; File name Folders are not subject to the search function.
168 Advanced features Network Device Setup ❖ T o use the remote control ke ypad, use the remote control up/down b uttons to enter th e name and password, and press the BLUE button.
169 Advanced features Network Device Setup 8 If you want to proceed with re gistration of Media Controllers, press the ( / arrow) b utt ons to select Ye s . Press the OK button. 9 Press the ( / arrow) b uttons to select the MA C address of the Media Controller you want to accept.
170 Advanced features Network Device Setup 3 Press the ( / arrow) b uttons to select Media Contr oller Setup . Press the OK button. 4 Press the ( / arrow) b uttons to highlight Access Control . Press the ( / arrow) b uttons to select On . 5 Press the ( / arrow) b uttons to select Media Contr oller .
171 Advanced features T oshiba A/V Remote App 1 Press the MENU button. Select NETWORK , Netw ork Device Setup and press the OK b utton. 2 Use the ( / arrow) b uttons to select Apps Con trol Pr ofil e and press the OK button. The Apps Control Profile windo w will appear .
172 Advanced features T oshiba A/V Remote App ❖ Third party Internet services are not provided by T oshiba, may change or be discontinued at any time and may be subject to Internet service provider restrictions.
173 Advanced features T oshiba A/V Remote App 3 Select the desired T oshiba equipment from the list. (Sample Illustration) T oshi ba A/V Remote App—Device Select scr een 4 Activ ate the selected device by entering in the a 4-digit PIN code on the pop-up windo w on the tablet or smartphone.
174 Advanced features T oshiba A/V Remote App The device control page will show se veral controls, depending on the device. Some of these controls may include: ❖ Number keypad —to enter in 0-9 digit numbers ❖ INPUT —Selects the v ideo input source.
175 Advanced features T oshiba A/V Remote App In addition, the T oshiba A/V Remot e App also includes a text input, mouse control and a touchpad control that allo ws you to use your tablet or smartpho.
176 Advanced features T oshiba A/V Remote App ❖ K eyboard button —displays the keyboard onscreen ❖ Left mouse click button —left-clicks on the selected item ❖ Right mouse click b utton —ri.
177 Advanced features T oshiba A/V Remote App For e xample, you can hav e the controls for the TV , cable box, satellite box, and Blu-ray™ all on one screen.
178 Advanced features T oshiba Send & Play App Popup and detailed information When you tap or t ouch and hold a TV program listing, i t will show more information about the selected program in a screen overlay . From this screen, you can decide whether to watch the program by selecting the Wa t c h button or select the Mor e button.
179 Advanced features T oshiba Send & Play Ap p ❖ Third party Internet services are not provided by T oshiba, may change or be discontinued at any time and may be subject to Internet service provider restrictions.
180 Advanced features T oshiba Send & Play App 3 Once the page has been loaded, tap the Send icon to send the website/URL to the TV . (Sample Illustration) T oshiba Send & Play br o wser scr een 4 The website/URL will automatically launch on the TV .
181 Chapter 9 T roubleshooting General troubleshooting Before calling a service technician, re vie w this chapter or visit the T oshiba technical support W eb s ite at support.toshib a.com for possible causes/solutions fo r the problem you are experiencing.
182 T roubleshooting Pictur e pr oblems Other problems. If your TV’ s problem is not ad dressed in th is T roub leshooting chapter or the recommended solution has not worked, use the Reset Factory Defaults procedure, see “Resetting to Factory Defaults” on page 107 .
183 T roubleshooting Pictur e pr oblems Adjust the picture quality , see “Using the advanced picture settings features” on page 117 . If Edge Booster does no t achie ve a sharper picture, change the Sharpness v alue to increase the sharpness le vel, see “Edge Enhancer” on page 117 .
184 T roubleshooting Sound pr oblems ❖ The settings of Side Shared Audio and Rear Sh ared Audio may be not correct. Check the connections, see “Connecting a digital audio system” o n page 34 . ❖ T urn off and unplug the TV from the A C wall outlet fo r a fe w seconds and plug it back in.
185 T roubleshooting Closed caption pr oblems If you cannot tune digital channels, check the antenna configuration, see “Initial setup” on page 51 . If the problem persists, clear all channels from the channel list and reprogram channels into memory , see “Stor ing channels in me mory (optional)” on page 66 .
186 T roubleshooting HDMI® pr ob lems unplug the power cord. After approximately one minute, plu g the power cord in and turn on the TV . If sev eral de vices are connected, the HDMI ® CEC Control feature may not operate properly . Read the instruction manual of the connected HDMI ® CEC de vice.
187 T roubleshooting Network pr oblems Network Setup fails (Manual). Ensure that the TV IP address is not the same as any other de vice on the network. ❖ Example: IP address 192.168.0.100 and IP address 192.168.0.101 are different addresses on the same network.
188 T roubleshooting W ireless network pr oblems T oo many de vices are connected. Y ou cannot connect more than 32 sharing devices at one time. The media server is not turned On. The “server” is not a media server de vice. Check the fire wall and str eaming settings on the media server .
189 T roubleshooting Light Indicator Confirm that the contents of eith er the media server or the USB storage device are in formats that are supported by this TV , see “MediaShare (Media Player) specif ications” on page 157 . Depending on the media server , access may be limited by the MA C address.
190 T roubleshooting If the pr oblem persists after trying the solutions ❖ Power On f ailure. T urn off the TV and unplug the po wer cord. After approximately one minu te, plug the po wer cord in again and turn on the TV . If the problem persists after tr ying the solutions In the U.
191 Appendix A Specifications ❖ This model complies with the specifications listed below . ❖ Designs and specifications are subject to change without notice. ❖ This model may not be compatible with features and/or specifications that may be added in the future.
192 Specifications P ower sour ce Power source 120 V A C, 60 Hz Power consumption Audio power Speaker type 42L6200U 0.8 A (maxi mum current) 0.3 W in Standby mode 47L6200U 0.9 A (maxi mum current) 0.3 W in Standby mode 55L6200U 1.0 A (maxi mum current) 0.
193 Specifications V ideo/audio terminals Video/audio terminals Video/audio input ColorStream ® (component video) HD input HDMI ® input Digital audio output Optical type PC input 15-Pin D-sub Analog RGB Wireless connection V ideo 1 V (p-p), 75 ohm , negati ve sync.
194 Specifications Dimensions (include foot stand) Ethernet IEEE 802.3. USB Univ ersal Serial Bus Specification, Re vison 1.1. Univ ersal Serial Bus Specification, Re vison 2.0. Dimensions (include foot stand) Mass (weight) Operating conditions 42L6200U W idth 37.
195 Specifications Supplied accessories Supplied accessories ❖ Remote control with two size “ A A” batteries ❖ L7200U model number: CT -90395 ❖ L6200U model number: CT -90408 ❖ Resource Gu.
196 Specifications Acceptable signal formats for PC IN, HDMI®, and 3D HDMI ® signal formats ❖ The HDMI ® inputs on this TV only accept VGA, SVGA, XGA, WXGA, and SXGA signal formats which are compliant with VESA-DMT as in the table below .
197 Specifications Acceptable signal formats for PC IN, HDMI®, and 3D F ormat Resolution V . F r equency H. F r equency Pixel Clock F r equen cy VESA Standar d (DMT) VG A 640 x 480 5 9. 9 40 H z 31.4 69 kHz 25. 17 5 MH z TB D 72.809 Hz 37 .861 kHz 31.
198 Specifications Acceptable signal formats for PC IN, HDMI®, and 3D 3D Signal formats* *Some content may not be supported depending o n the input source format. Resolution Aspect ratio V . F r equency H. F r equency Pixel Clock Fre q u e n c y 3D Structur e 1280 x 720p 16:9 23.
199 Specifications Operating the TV with combination b uttons Operating the TV with combination buttons Y ou can directly operate the TV power , input switch, picture size switch, and pict ure mode switch by pressing a combination button while holding down a color b u tton.
200 Specifications Operating the TV with combination b uttons YELLOW 1 AutoView (picture mode) 2 Dynamic (pictu re mode) 3 Standard (picture mode) 4 Movie (picture mode) 5 - (picture mode) 6 Store (pi.
201 Index Numerics 3D 2D from Quick m enu 79 3D from Quick m enu 78 3D lock 83 3D timer lock 83 adjusting 2D to 3D depth 84 auto start mode 81 button operation 76 change pin code 82 delete pin code 82.
202 Index Dolby® Digital Dynamic Range Control 126 muting sound 125 optical audio output format 12 6 Auto Aspect using 114 auto input features 70 C cables 3.
203 Index delete ev ent 151 editing fav orite apps 152 even t s 151 MediaShare 157 modify fav or ites 152 preferences 153 search 143 select apps 144 view f av orites 152 ePortal 142 ePOR T AL Intern e.
204 Index Network De vice Setup 167 no signal power down set 106 O overv iew installation 22 setup 22 use 22 P parental controls blocking programs/mo vies by rating (V -Chip) 91 using 91 Photos access.
205 Index mass (weight) 194 operating conditions 194 PC IN signal formats 195 PC input 193 power consumption 192 power source 192 remote, combination buttons 199 speaker type 192 supplied accessories .
206 Index access web page 150 adding fav orit es 150 browsing fa vorites 149.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Toshiba 42L6200U 47L6200U 55L6200U 47L7200U 55L7200U c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Toshiba 42L6200U 47L6200U 55L6200U 47L7200U 55L7200U - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Toshiba 42L6200U 47L6200U 55L6200U 47L7200U 55L7200U, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Toshiba 42L6200U 47L6200U 55L6200U 47L7200U 55L7200U va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Toshiba 42L6200U 47L6200U 55L6200U 47L7200U 55L7200U, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Toshiba 42L6200U 47L6200U 55L6200U 47L7200U 55L7200U.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Toshiba 42L6200U 47L6200U 55L6200U 47L7200U 55L7200U. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Toshiba 42L6200U 47L6200U 55L6200U 47L7200U 55L7200U ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
