Manuel d'utilisation / d'entretien du produit 24V4210U du fabricant Toshiba
Aller à la page of 168
GMA300010013 4/12 Note: T o display a High Definition picture, the TV must be receiving a High Definition signal (such as an over- the-air High Defin ition TV broadcast, a High Definition digit al cable program, or a High Definition digital satellite program).
2 Dear Customer , Thank you for purchasing this T oshiba LED TV . This manual will help you use the many exciting features of your new LED TV/DVD combination.
3 Im p orta n t Safety I n structio n s 1) Read these instructions . 2) Keep these instructions . 3) Heed all war nings . 4) Follow all instru ctions . 5) Do not use this apparatus near water . 6) Clean only with dry cloth . 7) Do not block any ventilation openings .
4 23) Never place the TV on an unst able cart, stand, or table. The TV may fall, causing serious p ersonal injury , death, or serious damage to the TV .
5 37) Never hit, pr ess, or plac e anything on the back cover . These actions will damage internal parts. 38) W ARNING: RISK OF ELE CTRIC SHOCK ! Never spill liquids or push objects of any kind into the TV cabinet slot s. 39) During a lightning storm, do not touch the connecting cabl es or prod uct.
6 Removing the Pedest al St and 1) Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand prot ruding over the edge of the surface. Note : Extreme care should always be used when removing the pedest al stand to avoid damage to the LCD panel.
7 DVD Video CD/Audio CD Each title, chapter or track is assigned a numbe r , which is called “title number”, “chapter number” or “track number” respectively .
8 • Y ou cannot play discs other than those listed above. • Y o u cannot play discs of DVD-RAM, DVD-ROM, CD-ROM, Photo CD, etc., or non-st andardized discs even if they may be labeled as above. • Some DVD-R/RWs and CD-R/R Ws cannot be played back depending on the recording condi tions.
9 Important notes about your TV/DVD combination The fo llowing symptoms ar e technical limitations of LCD Display technology and a re not an indication of malfunction; ther efore, T oshiba is not responsi ble for perceiv ed issues resulting from these symptoms.
10 Notice The information contained in this ma nual, including but not limited to any product speci fications, is subject to change without notice. TOSHIB A CORPORA TION AND TOSHIBA AMERICA INFORMA TION SYSTEMS, INC.
11 Contents Chapter 1: Introduction ... ......................... ..................... ............. 18 Features ..................................................................18 Overview of installation, setup, and use ..................19 TV front, top, and side pane l controls and connections 20 Adjusting the screen angle .
12 Con t en t s Connecting a DVD player with Color S tream ® (component video) ............................................ 29 Connecting a satellite receiver.................................30 Connecting an HDMI® or DVI device to the HDMI® input .
13 Con t en t s Favorites browser ............................................. 64 Elements of the Channel Browser .....................65 Adding and clearing channels and inputs in the History List .................................................67 Tuning channels .
14 Con t en t s Adjusting the audio quality ................................ 83 Audyssey Premium Television™ ......................84 Audyssey ABX™ ...............................................84 Using Audyssey Dynamic Volume® .................
15 Con t en t s Using HDMI® CEC ................................................ 108 Displaying TV status information ..........................112 Understanding the auto power off feature ............. 113 Understanding the last mode memory feature .
16 Con t en t s Changing the scene angle (DVD) ....................130 S electing a DVD title (DVD) ............................. 130 DVD menu (DVD) ............................................ 130 S ound track language/Audio channel/ S ubtitle ......
17 Con t en t s Media Player problems .........................................152 Disc playback problems ........................................152 light indicator .......................................................153 Power indicator ..........
18 Chap t e r 1 Introduction Fea t u r es The follo wing are just a few of th e many e xciti ng features of your new T o shiba wide screen, in tegrated HD, LED TV/D VD combination: ❖ Integrated Digital T uning (8VSB A TSC and QAM) — Eliminates the n eed for a separate digital conv er ter set-top box (in most cases).
19 In tr oduc t ion Overview of installation, setup, and use ❖ HDMI® CEC —Allows control of e xternal devices from the TV remote via HDMI ® connection, see “Using HDMI® CEC” on page 108 . ❖ Media Player —Allows you to vie w photo files and play music, see “Using the Media Player” on page 99 .
20 In tr oduc t ion TV fr ont, top, and side panel contr ols and connec tions 6 See “Learning about the remot e control” on page 42 for an ov erview of the buttons on the remote control. 7 After connecting all cables and devices, plug in the po wer cords for your TV and other de vices.
21 In tr oduc t ion TV fr ont, top, and side panel con tr ols and connections 2 Remote sensor (embedded) —Point the remote contro l tow ard this remote senso r . 3 Disc slot —Load the disc, with label facing forward, into the disc slot to view or listen.
22 In tr oduc t ion Adjusting the scr een angle Adjus t ing t he sc r een angle Y ou can adjust the angle of the TV screen 3° forward or 15° backward from a vertical angle. Hold the base of the TV while adjusting the screen. (This featur e is a vailable on select models.
23 In tr oduc t ion TV back panel connections 2 ANALOG A UDIO OUT —Analog audio ou tputs for connecting an audio amplifier . 3 PC/HDMI 1 (A udio) IN —PC audio input ter minal is shared with an HDMI 1 analog audio input termin al, and its use can be configured in the Audio Setup menu , see “Setti ng the PC Audio” on page 98 .
24 Chap t e r 2 Connecting Y our TV Ove r view of cable t ypes Before purchasing cables, know the connector types your de vices require. Y ou can purchase cables from most st ores that sell audio/video devices.
25 Connec t ing Y ou r TV Overview of cable types S t anda r d A/V cables ( r ed/whi t e/yell ow) (Sample Illustration) Standar d A V cabl es Standard A/V cables (composite video) usually come in sets of three, and connects wi th video devices with analog audio and composite video outpu t.
26 Connec t ing Y ou r TV Overview of cable types Op t ical audio cable (Sample Illustration) Optical audio cable Optical audio cable connect s recei vers with Dolby ® Digital or PCM (pulse-code modulation) optical audi o input to the TV’ s Digital Au d i o O u t terminal, see “Connecting a digital audio system” on page 35 .
27 Connec t ing Y ou r TV Connecting a VCR, antenna, or cable TV Connec t ing a VCR, an t enna, o r cable TV (Sample Illustration) Connecting to a VCR, ant enna, or Cable TV Items needed: ❖ Coaxial .
28 Connec t ing Y ou r TV Connecting a camcor der Connec t ing a camco r de r (Sample Illustration) Connectin g a camcorder Y ou will need standard A/V cables.
29 Connec t ing Y ou r TV Connecting a D VD player with ColorStream ® (component Connec t ing a DVD playe r wi t h Colo r S tr eam ® (componen t video) (Sample Illustration) Connecting a DVD player .
30 Connec t ing Y ou r TV Connecting a satellite r eceiver Connec t ing a sa t elli t e r eceive r (Sample Illustrati on) Connecting a satellite receiver Items needed: ❖ Standard audio cables ❖ Co.
31 Connec t ing Y ou r TV Connecting an HDMI® or D VI device to the HDMI® input The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability .
32 Connec t ing Y ou r TV Connecting an HDMI ® or D V I device to the HDMI® input ❖ HDMI ® cables transfer both video and audio. Separate analog audio cables are not required (see illustration). (Sample Illustration) Connectin g an HDMI ® device T o view the HDMI ® device video: Select HDMI 1 or HDMI 2 video input source on the TV .
33 Connec t ing Y ou r TV Connecting an HDMI® or D VI device to the HDMI® input ❖ 3.5mm Stereo to R CA Y - Cable An HDMI ® to D VI adapter cable transfers vide o only .
34 Connec t ing Y ou r TV HDMI® CEC connection HDMI® CEC connec t ion Y ou can control the basic functions of connected audio/video devices using the TV’ s remote control if you connect a HDMI® CEC compatible audio receive r or playback de vice. For an explanation of setup and operations, see “HDMI® CEC playback device (D VD player , et c.
35 Connec t ing Y ou r TV Connecting a digital audio system ❖ This feature is limited to models incor porating T oshiba’ s HDMI® CEC. Howe ver , T oshiba is not liable for tho se operations. For compatibili ty information, refe r to the individual instruction manuals for your other de vices that hav e CEC technology .
36 Connec t ing Y ou r TV Connecting a digital audio system 3 Press the ( / arro w) buttons to select Au d i o S e t u p , and then press the INPUT button. (Sample Image) Audio Setup scr een 4 Press the ( / arro w ) buttons to select Digital Output Fo r m a t .
37 Connec t ing Y ou r TV Connecting a computer Connec t ing a compu t e r W ith either the PC IN or HDMI ® connection, you can view your computer’ s display on the TV and hear the sound from the TV’ s speakers.
38 Connec t ing Y ou r TV Connecting a computer Other formats or non-stand ard signals will not be displayed correctly . T o display the optimum pict ure, us e the computer setting feature, see “Using the PC settings feature” on page 97 . ❖ The PC audio input terminals on the TV are shared with the HDMI 1 analog audio input terminals.
39 Connec t ing Y ou r TV Connecting a computer Connec t ion t o t he TV’ s HDMI ® t e r minal When connecting a co mputer w ith a HDMI ® terminal on the TV , use an adapter cable an d analog audio cables. When connecting a comp uter with an HDMI ® port, use an HDMI ® cable (type A connector).
40 Chap t e r 3 Using the Remote Control Using t he r emo t e con tr ol The remote control can operat e your LED TV/DVD combination and control the basic functions of connected audi o/video devices if you connect a HDMI® CEC compatib le audio recei ver or playback device, se e “HDMI® CEC playback device (D VD player, etc.
41 Using t he Remo t e Con tr ol Installing batteries 2 Insert the batteries, corresponding to the (+) and ( –) markings on the battery co mpartment. (Sample Illustration) Installing th e batteries 3 Replace the battery cov er . Do not expose batteries to excessive heat such as s unshine, fire, etc.
42 Using t he Rem o t e Con tr ol Learning about the r e mote contr ol Lea r ning abou t t he r emo t e con tr ol The buttons used for operating the LED TV/D VD combinatio n are described here. For the HDMI® CEC remote control functions, see “HDMI® CEC playback device (D VD player, etc.
43 Using t he Remo t e Con tr ol Learning about the remote contr ol The error message “NOT A V AILABLE” may appear if you press a key for a function that is not available. 1 The PO WER button turns the TV On and Of f . When the TV is on, the power LED indicator on the TV front glo ws green.
44 Using t he Rem o t e Con tr ol Learning about the r e mote contr ol 17 The CH R TN button returns to the la st viewed channel or source, see “Switching between two channels using Channel Return.
45 Using t he Remo t e Con tr ol Learning about the remote contr ol 30 The STOP butt on stops playback of the loaded disc, see “Playing an audio file” on page 136 . 31 The SKIP forward bu tton skips forward to locate later D VD chapters, see “Playing an aud io file” on page 136 .
46 Chap t e r 4 Menu Layout and Navigation Main menu layou t The Installation menu contains th e T errestrial and System Status menus. T o open the Installation menu, press the MENU button on the remote control or MEN U on the TV control panel, open the Setup menu, select Installatio n, and then press the OK button.
47 Menu Layou t and Naviga t ion Menu setup/installation/layout Menu se t up /ins t alla t ion/layou t The Installation menu contains th e T errestrial and System Status menus.
48 Menu Layou t and Naviga t ion Navigating th e menu system Naviga t ing t he menu sys t em Y ou can use the buttons on the remote control or TV control panel to access and na vigate your TV’ s on-screen menu system. 1 Press the MENU button to open the menu system.
49 Menu Layou t and Naviga t ion Navigating the menu system 4 All menus close automatically if you do not make a selection within a fe w seconds, except the signal met er menu, which closes automatically after a fe w minutes. 5 T o close a menu instantly , press the EXIT button.
50 Chap t e r 5 S etting up your TV Ini t ial S e t up When you f irst turn on or reset the TV , the Init ial Setup windo w will appear . 1 In the M enu Language field, press the ( / arrow) b uttons. 2 Press the ( / arrow) buttons to select Time Zone Setup and set your desired time zone, using the ( / arro w) buttons, and then press the OK button.
51 Se tt ing up you r TV Initial Setup Menu language Y ou can choose from three dif ferent menu language settings (English, Français, and Español). Y o ur selection is the language all menus are displayed in. T o select the me nu language: 1 Press t h e MENU button to open the Prefer ences menu, and highlight Men u Language .
52 Se tt ing up you r TV Storing channels in memory (optional) 4 Highlight ANT/CABLE In and press the ( / arro w) buttons to select the input source ( Cable or Antenna ). (Sample Image) Selecting the ANT/CABLE inpu t source 5 T o sav e yo ur new settings, highlight Done , and then press the OK button.
53 Se tt ing up you r TV Storing channels in memory (optional) 3 Highlight Install ation , and then press the OK button. (Sample Image) Auto tuning pr ogram channels A new set of Installation menus appear .
54 Se tt ing up you r TV Setting channel skip Se tt ing channel skip T o prev ent a channel from being viewed, you can set it to be skipped. 1 From the Set up menu, highl ight Installation, a n d t h e n p r e s s th e OK bu tt o n . 2 Press the ( / arro w) buttons to select Channel Options , and then press th e OK button.
55 Se tt ing up you r TV Setting the HDMI® audio mode 2 Press the ( / arro w) buttons to select a channel position to be locked, and then press t he OK bu t t on . Enter your four-digit PIN code. A check appears in the box. T o remove the check, press th e OK button again.
56 Se tt ing up you r TV Setting the HDMI® audio mode 3 Press the ( / arro w) buttons to select HDMI 1 A udio , and then press the ( / arro w) buttons to select the HDMI 1 audio mode ( Au t o , Digital , or Analog ). ( Au t o is the recommended mode.
57 Se tt ing up you r TV V iewing the Digital Si gnal Meter Viewing t he Digi t al Signal Me t e r Y ou can view the digital signal meter in the ANT/ CABLE digital TV input source only . T o view the digital signal meter: 1 Press t h e MENU button to open the Setup menu.
58 Se tt ing up you r TV V iewing the system status T o set the Daylight Saving Time status, press the ( / arrow) buttons to select Ye s or No , highlight Done , and then press the OK button. Viewing t he sys t em s t a t us 1 Press t h e MENU button to open the Setup menu.
59 Chap t e r 6 Using the TV’ s f e a t u r e s Selec t ing t he video inpu t sou r ce T o select the video input source to view: 1 Press t h e INPUT button on the remote control or TV control panel. 2 Choose from the following options: ❖ Press 0-5.
60 Using t he TV’s fea t u r es Selecting the video input sour ce ❖ The current signal source displays in the top right corner of the Input Selection screen.
61 Using t he TV’ s fea t u r es Labeling the video input sources Press t h e INPUT button repeatedly to highlight the desired input source, and then press the EXIT button. ❖ When selecting HDMI® CEC input sources from the pop-up window using the INPUT button, some HDMI® CEC devices may automatically turn on.
62 Using t he TV’s fea t u r es Labeling the video input sources T o label the video inp ut sources: 1 Press t h e MENU b utton to open the Preferences menu. 2 Highlight In put Labeling , and then press the OK button. (Sample Image) Input Labeling screen 3 Press the ( / arrow) b uttons to highligh t the video source you wish to label.
63 Using t he TV’ s fea t u r es T u ning channels using the Channel Br owser Input labeling example: The screen belo w left shows the def ault Input Selection screen (with none of the inputs lab eled as a specific de vice).
64 Using t he TV’s fea t u r es T uning channels using the Channel Br owser Favo r i t es b r owse r The Fa vorites Browser allo ws you to quickly configure a fa vorite channels/inputs list that is integrated into the Channel Browser . T o add a fav orite channel/input: 1 T une to the channel or input .
65 Using t he TV’ s fea t u r es T u ning channels using the Channel Br owser 5 Press the ( arrow) b utton t o highlight Inputs List , and then press the ( / arrow) b uttons to select On / Off . 6 Press the ( arrow) b utton t o highlight Fa vorites List , and then press the ( / arrow) buttons to select On / Off .
66 Using t he TV’s fea t u r es T uning channels using the Channel Br owser 4 Channel or input that is currently high lighted in the browser 5 Channels stored in the History List T o toggle among th.
67 Using t he TV’ s fea t u r es T u ning channels Adding and clea r ing channels and inpu t s in t he His t o r y Lis t Adding channels and inputs to the History List: As a channel or input is tuned, the Channel Browser adds it to the History Li st and displ ays it on th e right sid e of the Channe l Browser .
68 Using t he TV’s fea t u r es T uning channels T uning t o t he nex t p r og r ammed channel T uning analog channels: Press the Channel Number (0–9) bu ttons on the remo te control. For example, to select channel 125, press 1, 2, 5, and then press the OK button.
69 Using t he TV’ s fea t u r es Selecting the picture size 2 Press and hold the CH R TN button for a few seconds until the message “Memorized” appears on the screen. The channel has been programmed to the CH R TN button. 3 Y ou can then change channels repeatedly , and when you press the CH R TN button, the memo rized channel will be tuned.
70 Using t he TV’s fea t u r es Selecting the pictur e size T o select the picture size using the menus: 1 Select Picture Size in th e Theater Settings menu. 2 Press the ( / arrow) buttons to select the desired picture size setting. 3 Highlight Do ne , and then press the OK b u tton.
71 Using t he TV’ s fea t u r es Selecting the picture size Thea t e r Wide 1 This setting is for vi ewing in 4:3 format programs. (Sample Illustration) Pict ure size - TheaterW ide 1 The center of the picture remains cl ose to its original proport ion, but the left and right edges ar e stretched horizont ally to fill the screen.
72 Using t he TV’s fea t u r es Selecting the pictur e size Na t ive These settings are for viewing in 480i (HDMI ® ), 480p (HDMI ® ), 720p, 1080i, and 1080p signal programs).
73 Using t he TV’ s fea t u r es Scr olling the TheaterW ide® pictu r e (TheaterW ide 2 and 3 only) No r mal This setting is for viewing VGA, SV GA, XGA, WXGA, and SXGA sources. (Sample Illustration) Picture size - Normal This size is a non-stretched display .
74 Using t he TV’s fea t u r es Using the A uto Aspect featur e 2 Highlight Theater Settings , and then press the OK button. (Sample Image) Theater settings scr een 3 In the Picture Size fi eld, select either TheaterWide 2 or TheaterWide 3 Y ou cannot scroll in any other mode.
75 Using t he TV’ s fea t u r es Selecting the cinema mode The auto aspect ratio feature is not applicable to the PC input. T o turn on the auto aspect ratio feature: 1 Press the MENU button and open the Picture menu. 2 Highlight Theater Settings , and then press the OK button.
76 Using t he TV’s fea t u r es Adjusting the pictur e Using the FREEZE function for any purpose other than your private viewing may be prohibited under the Copyrig ht Laws of the United States and other countries, and may subject you to civil and criminal liability .
77 Using t he TV’ s fea t u r es Adjusting the pictur e 2 Highlight Mode , and then press the OK b utton . (Sample Image) Mode scr een 3 Press the ( / arrow) buttons, and then press the OK b u tton.
78 Using t he TV’s fea t u r es Using closed captions **DynaLight ® : This function automatically st rengthens the black coloring of dark areas in the video accord ing to the lev el of darkness. T o adjust the picture quality: 1 Press the MENU button and open the Picture menu.
79 Using t he TV’ s fea t u r es Using closed captions T o view captions, highlight CC1 , CC2 , CC3 , or CC4 . (CC1 displays translation of the primary language in your area.) (Sample Illustration) V iewing captions If the program or video you selected is not closed captione d, no captions will display on-screen.
80 Using t he TV’s fea t u r es Using closed captions Digi t al CC se tt ings Y ou can customize the closed caption display characteristics by changing the background co lor , o pacity , t ext size, type, edge, and color . ❖ These settings are available for digital channels only .
81 Using t he TV’ s fea t u r es Adjusting the audio caption setting will automatically ch ange back to the current Base CC Mode setting. Y ou can also use the CC Selector to select digital closed caption services, if av ailable. When such services are not a vailable, the CC Selector presents a default lis t of services.
82 Using t he TV’s fea t u r es Adjusting the audio Using t he digi t al audio selec t o r Y ou can use the Digital Audio Sel ector to con veniently switch between audio tracks on a digital ch annel (for those channels that hav e multiple audio tracks).
83 Using t he TV’ s fea t u r es Adjusting the audio ❖ Y ou can typically leave the TV in Stereo mode because it outputs the type of sound being broadcast (stereo or monaural).
84 Using t he TV’s fea t u r es Adjusting the audio T o adjust the audio quality: 1 Press t h e MENU b utton to open the Sound menu. 2 Highlight Audio Setup , and then press the OK b utton. 3 Press the ( / arrow) buttons to highlight the item you wish to adjust (Bass, T reble, or Balance).
85 Using t he TV’ s fea t u r es Adjusting the audio 3 Press the ( / arrow) buttons to highlight the A udyssey ABX™ fi e ld . 4 Press the ( / arrow) buttons to select On . Using Audyssey Dynamic Volume ® This feature provides a consistent sound volume between television programs, commercials, and between the loud and soft passages of movies.
86 Using t he TV’s fea t u r es Using the Loc ks menu 2 Highlight Audio Setup , and then press the OK b utton. 3 In the Dolby ® Digital Dynamic Range Control f ield, select either Compressed . When Standard is selected, the audio outputs with minim al compression.
87 Using t he TV’ s fea t u r es Using the Locks menu 2 Press the ( arro w ) button to display the PIN code entry screen. The Lock System screen appear s if a PIN code has not been stored.
88 Using t he TV’s fea t u r es Using par ental contr ols (for USA re gion) 4 Press the ( arro w ) button to highlight New PIN Code , and then press the OK button. 5 Press the Number buttons to enter a new four -digit code. Reenter the PIN code to confirm it.
89 Using t he TV’ s fea t u r es Using par ental contr ols (for USA r e gion) (Sample Image) Loc ks menu screen for other r egions 6 Press the ( arro w) button to highlight Edit Rating Limits , and then press the OK button. 7 Press the ( // / arro w) buttons, and then press the OK button.
90 Using t he TV’s fea t u r es Using par ental contr ols (for USA re gion) 5 Press the ( arro w ) button to select On . 6 Press the ( arro w ) button to highlight Edit Rating Limits , and then press the OK b utton. The Edit Rating Limits screen appears.
91 Using t he TV’ s fea t u r es Using par ental contr ols (for USA r e gion) Ra t ing sys t em Independent rating system for broadcast ers: Independent rating system for movies: Ratings: Descriptio.
92 Using t he TV’s fea t u r es Using par ental contr ols (for USA re gion) Indication other than rating system: If you place an “X” in the box next to “None” Rated, programs rated “None” or “Not Rated” will be blocked; Programs that do not provide any rating information will not be blocked.
93 Using t he TV’ s fea t u r es Using par ental contr ols (for USA r e gion) 8 Press the ( // / arro w) buttons, and then press the OK button to select the le vel of blocking you prefer . A box with an “ X ” is a rating that will be blocked. 9 T o sav e the new settings, highlight Done , and then press the OK button.
94 Using t he TV’s fea t u r es Using the input lo ck featur e T o temporarily unlock the p rogram: 1 Press the MUTE b utton. 2 Enter your four -digit PIN code, and then press the OK button. If the correct code is entere d, the program lock mode is released and the normal picture appears.
95 Using t he TV’ s fea t u r es Locking c hannels 3 Press the ( / arrow) buttons to select Channel Options , and then press the OK button. The list of channels appear . (Sample Illustration) Channel options 4 Press the ( arro w ) button, an d then press the ( / arrow) buttons to select a c hannel in the lock column.
96 Using t he TV’s fea t u r es Locking c hannels T o cancel the GameTimer ® , select Off in step 3 above. T o deactiv ate the Input Lock once the GameT i mer ® has activ ated it: ❖ Set the In put Lock to Off , see “Using the GameT imer®” on page 95 .
97 Using t he TV’ s fea t u r es Using the PC settings featur e T o unlock the control panel, select Of f in Step 5 abov e or press and hold the VO L U M E ( – ) button on the TV control panel for a few seconds until the volume icon appears. Using t he PC se tt ings fea t u r e Y ou can view an image from a PC on the TV screen.
98 Using t he TV’s fea t u r es Using the PC settings featur e The screen is disrupted momentarily while adjusting the PC settings. This is not a sign of malfunction. * The default settings and/or adjustment ranges may vary depending on the input signal format.
99 Using t he TV’ s fea t u r es Using the Media Player Using t he Media Playe r Using Media Playe r wi t h a USB device Y ou can enjoy photos or music contents stored on a USB storage device. Photo V ie wer specifications: ❖ Data type: JPEG EXIF ver 2.
100 Using t he TV’s fea t u r es Using the Media Player ❖ Gently insert the USB device into the port and do not remove while viewing Media Player . ❖ USB device: USB Mass Storage Class devic e (MSC) ❖ Connectivity is not guara nteed for all devices.
101 Using t he TV’ s fea t u r es Using the Media Player 2 Press the ( / arrow) b uttons to select Ye s , and then press the OK button. The Media Player menu will a ppear . When you select No, nothing happens. (Sample Image) Media Player - open screen ❖ The prompt will disappear after about 10 sec.
102 Using t he TV’s fea t u r es Using the Media Player This view allo ws you to search fo r photos in a grid format. These pictures are displayed using thum bnail data in each image file. (Sample Image) Media Player - photos screen 1 Press the ( / / / arro w) buttons to mov e the highlight in one window .
103 Using t he TV’ s fea t u r es Using the Media Player Slide show This view allo ws you to watch a slide show of the photos. In this mode, only files located in the se lected directory will be played. 1 T o start slide show , press the OK button to select Singl e V iew mode.
104 Using t he TV’s fea t u r es Using the Media Player ❖ If playback finishes before the STOP button is pressed, the next file automatically starts to play from the beginning. ❖ Depending on the file size, it may take some time for playback to begin.
105 Using t he TV’ s fea t u r es Using the Media Player Contents Description Description Photo Photo list (Multi View) See page 137 Sorting T o sort the folders and files: 1 Press the MENU button to open the Quick Menu from Multi View mode. 2 Press the ( / arrow) buttons to select So rt .
106 Using t he TV’s fea t u r es Setting the sleep timer During playback, you can adjust the SOUND menu functions from the Quick Menu. Se tt ing t he sleep t ime r Y ou can set the sleep timer to turn off the TV after a set length of time (maximum of 12 hours).
107 Using t he TV’ s fea t u r es Automatic P ower Down 3 Press the Number buttons to enter the length of time (maximum of 12 hours) and then press the OK button. Or press the ( / arrow) button s to increase or decrease in 10-minute increments, (maxim um of 12 hours).
108 Using t he TV’s fea t u r es No Signal P ower Down No Signal Powe r Down The TV will automatically turn itself off after 15 minutes when no signal is detected.
109 Using t he TV’ s fea t u r es Using HDMI® CEC These functions depend on the devices connected. HDMI® CEC Player Control menu fun ctions: 1 Press the MEN U button, and then open the Pr eferences menu. 2 Highlight HDMI® CEC Player Control , and then press the OK bu tt o n .
110 Using t he TV’s fea t u r es Using HDMI® CEC These functions depend on the devices that are connec ted. The HDMI® CEC Player Control item will be grayed out in the following conditions: ❖ A non-HDMI ® input is currently selected. ❖ The Enable HDMI® CEC item is set to Off.
111 Using t he TV’ s fea t u r es Using HDMI® CEC O t he r HDMI® CEC func t ions When the Enable HDMI® CEC and each item in the HDMI® CEC Setup menu are set to On , the following functions will be enabled.
112 Using t he TV’s fea t u r es Displaying TV status information 5 T o sav e the new settings, highlight Done and press the OK button. T o re vert to the factory defaults, highlight Reset and press the OK b utt on. Displaying TV s t a t us info r ma t ion T o display TV status information: ❖ Press the INFO b utton on the remote control.
113 Using t he TV’ s fea t u r es Understanding the auto power off featur e The location of the banner can be moved to the top or bottom of the screen by pressing or while the INFO display is on-screen.
114 Chap t e r 7 Using the TV’ s Advanced Features Using t he advanced pic t u r e se tt ings Dynamic Con tr as t Dynamic Contrast detects changes in picture quality that af fect the appearance of your contrast settings and then automatically adjusts the video.
115 Using t he TV’ s Advanced Fea t u r es Using the advanced pictur e settings 4 Press the ( / arrow) b uttons to select High , Middle , Low or Off . S t a t ic Gamma The static gamma feature lets you ad just the lev els of black in the picture. T o adjust the static gamma settings: 1 Press t h e MENU button to open the Pictur e menu .
116 Using t he TV’ s Advanc ed Fea t u r es Using the advanced picture settings 2 Highlight Picture Settings , and then press the OK button. 3 Highlight Advanced Picture Sett ings , and then press the OK button. 4 Highlight Color T emperature , and then press the OK b utton .
117 Using t he TV’ s Advanced Fea t u r es Using the advanced pictur e settings ❖ If the current input is ANT/CABLE or VIDEO, the menu will display the text “CableClear”. The available selections are Off, Low , Middle, and High. ❖ If the current input is ColorStream ® HD, HDMI 1 or HDMI 2, the menu will display the text “DNR”.
118 Using t he TV’ s Advanc ed Fea t u r es Using the advanced picture settings T o use the Game Mode feature, the current video input must be Video, ColorStream ® HD, HDMI 1 or HDMI 2. The Game Mode cannot be turned on when any other video input, other than the above mentioned is selected.
119 Chap t e r 8 Basic Disc Playback Disc playback This section shows you the basics on ho w to play a disc. Basic playback (DVD/VCD/CD) 1 Press the PO WER button on the TV control panel or on the remote control. The Po wer LED on the front of the LED TV/D V D combination changes to green.
120 Basic Disc Pl ayback Disc playback 2 Press the TV/D VD button on the remote control to switch to D VD mo de. The D VD start-up screen appears. (Sample Image) D VD start-up screen 3 Hold the disc by its edges and load it in the disc slot with the label side facing forw ard.
121 Basic Disc Playback Disc playback Higher quality picture: High resolution pictures on some discs may occasionally cause noise on the picture display . If this is the case, reduce the Sharpness setting un der the Picture Settings menu. ❖ Keep your fingers well clear o f the disc slot when a disc is loading or unloading.
122 Basic Disc Pl ayback Playback navigation ❖ When you load a disc with the playback side facing backward, the message, “Loading” appears on the screen. It will be replaced by the message, “Incorr ect Disc. ” Eject the disc and load it again making sure the playback side is no w facing forward.
123 Basic Disc Playback Playback navigation Playing f r ame by f r ame (DVD/VCD) Press the PAU S E b utto n during playback. Each time you press the PA U S E button, the picture adv ances one frame. T o resume normal playback, press the PLA Y button. The sound is muted during frame by frame playback.
124 Chap t e r 9 Advanced Disc Playback Zoom func t ion/Scene naviga t ion Y ou can change the viewing s cale of a picture by using the Zoom function. Once the image has been rescaled, use the ( / / / arro w) buttons to pan the image. Scene navigation options dif f er depending on the kind of disc.
125 Advanced Disc Playback Zoom function/Scene navigation ❖ Y ou can use the Pause, Slow and Search playback functions in Zoom mode. ❖ Zoom function may not apply to some discs. Loca t ing a specific scene 1 Press the JUMP b utton during playback, still or stop mode.
126 Advanced Disc Playback Scene bookmark VCD mode: (Sample Image) Disc J ump - VCD mo de CD mode: (Sample Image) Disc J ump - CD mode ❖ When you use title navigation, playback starts from the fi rst chapter of the selected title. ❖ For PBC-enabled VCDs, turn off the PBC function first before using the Jump function.
127 Advanced Disc Playback Scene bookmark Bookma r king a scene (DVD/VCD) 1 During playback, press t he MARKER button at the scene you would like to place the bookmark. (Sample Image) Disc scene bookmarking 2 Press the ( / arro w) b uttons to select a blank marker , and then press the PLA Y b utton.
128 Advanced Disc Playback Scene bookmark Viewing a scene bookma r k (DVD/VCD) 1 Press the MARKER button to open the bookmark window . 2 Press the ( / arro w) buttons to select the sa ved marker . (Sample Image) Disc scene bookmarking 3 Press t h e PLA Y button to start playback on the scene sa ved in the selected bookmark.
129 Advanced Disc Playback Scene bookmark The LED TV/D VD combination automatically starts repeat playback af ter finishing the current titl e or chapter . (Sample Image) Disc enabling repeat playbac k VCD: ❖ Press the PLA Y MODE button repeatedly to select a repeat mode.
130 Advanced Disc Playback Scene angle/T itle selection/D VD menu T o resume normal playback, press the REPEA T A-B b utton until "A-B repeat" disappears on the screen. ❖ In some cases, subtitles for the repeated scene may not dis play . ❖ The A-B repeat mode may not apply to some DVD scenes.
131 Advanced Disc Playback Sound trac k language/A u dio channel/Subtitle 2 Press the ( / / / arrow) b uttons to select a DVD menu item, and then press the OK or PLA Y bu tton to access it. Use the same buttons to enable an option for the selected item.
132 Advanced Disc Playback Playback information/VCD playback contr ol T o disable subtitles: Press the SUBTITLE button until Off appears. ❖ Not all DVDs have encoded subtitles. ❖ The subtitle selection may revert to the default language when you stop playback and try to play the DVD again.
133 Advanced Disc Playback MP3, WMA, JPEG, and Audio CD operation (Sample Image) Enabling the PBC function When enabled, PBC allo ws interacti ve V ideo CD playback using the remote control. MP3, WMA, JPEG, and Audio CD ope r a t ion This LED TV/D VD combination can play MP3, WMA, an d JPEG files recorded on a D VD/CD-R or D VD/CD-R W disc.
134 Advanced Disc Playback MP3, WMA, JPEG, and A udio CD operation ❖ Refrain from making too many sub-folders. ❖ It may take more th an one minute for this LED TV/D VD combination to read MP3, WM A, and JPEG files depending on the disc structure.
135 Advanced Disc Playback MP3, WMA, JPEG, and Audio CD operation ❖ WMA: ❖ File format: WMA version 7 or 8 ❖ Sampling frequency: 32 kHz/48 kbps, 44.1 kHz/48 to 92 kbps, 48 kHz/128 to 192 kbps A file recorded in mono (48 kHz/48 kbps) is not supported by this LED TV/D VD combination.
136 Advanced Disc Playback MP3, WMA, JPEG, and A udio CD operation V iewing image files in thumbnail mode: Y ou can change the bro w sers vie w mode from list mode to thumbnail mode. This is con venient when bro wsing for JPEG files. 1 Press the D VD MENU button during JPEG playback.
137 Advanced Disc Playback MP3, WMA, JPEG, and Audio CD operation 3 Press the PLA Y button or the OK button to start playback. T o stop playback, press the STOP b utton. ❖ If the current directory has more than eight files, press the ( / arrow) buttons to scroll the file list.
138 Advanced Disc Playback MP3, WMA, JPEG, and A udio CD operation Viewing a slide show If there are multiple JPEG f iles in the selected directory , you can view them in a slide sho w . The in structions on how to enable the slide sho w feature and set the inte rval period between pictures are listed below .
139 Advanced Disc Playback MP3, WMA, JPEG, and Audio CD playback modes ❖ The Rotate mode is available in regular JPEG viewing and slide show modes. ❖ The A-B repeat mode is not available when viewing JPEG images. ❖ During a slide show , the inter val time between images may increase if the file size is too big.
140 Advanced Disc Playback MP3, WMA, JPEG, and Audio CD playback modes P r og r amming t he playback sequence 1 In the file bro wser, press the MARKER button to open the file list (Sample Image) Pr ogramming the playback sequence Y ou can not select the same file twice or more.
141 Advanced Disc Playback Customizing disc playba ck 3 Press the MARKER b utton, The programmed files appear in the Playlist. (Sample Image) Pr ogramming the playback sequence 4 In the programmed file list, press the ( / arrow) b uttons to select a file, and then press the PLA Y button to start playback.
142 Advanced Disc Playback Customizing disc playba ck 2 Press the ( / arrow) buttons to select a setup tab, and then press the ( arrow) b u tton. The first setup option is highlig ht. (Sample Image) Configuring disc playback settings 3 Press the ( / arrow) b ut tons to select t he setup option yo u wish to customize.
143 Advanced Disc Playback Customizing disc playba ck Disc playback se t up These setup settings are retained in the LED TV/DVD combination’ s memory . It remains active even if the power is turned off. (Sample Image) Playback settings OSD Language Select the language for the D VD and Setup menu displa y .
144 Advanced Disc Playback Customizing disc playba ck The selected language will be heard or seen. (Sample Image) Playback settings (Sample Image) Playback settings Parent al A D VD is usually encoded with a rating lev el to indicate the recommended audience age.
145 Advanced Disc Playback Customizing disc playba ck ❖ The Parental rating levels correspond to the US movie ratings . ❖ Some discs may not have their rating level encoded on the disc though it’ s indicated on the disc jacket. Playback restriction will not apply to these discs so make sure to restrict access to it manually .
146 Advanced Disc Playback Customizing disc playba ck 3 Use the Channel Number b utton s (0–9) to inp ut the current passwor d. If the password has not been set yet, k ey in “0000. ” This is the factory default password. 4 Use the Channel Number b uttons (0–9) to input the ne w passwor d.
147 Chap t e r 10 T roubleshooting Gene r al tr oubleshoo t ing Before calling a service technician, revie w this chapter or visit the T oshiba technical support W eb site at suppor t.toshiba.com for possible causes/solutions for th e prob lem yo u are experiencing.
148 T r oubleshoo t in g Pictur e pr oblems Other problems. If your TV’ s problem is not ad dressed in this T r oubleshooting chapter or the recommended solution has not worked, use the Reset Factory Defaults procedure, see “Reset Factory Def aults” on page 58 .
149 T r oubleshoo t in g Sound pr oblems V ideo Input Selection problems. If the Input Selection window does not appear when you press INPUT on the remote control or TV , press INPUT a second time. This will cause a change to the next video input source and display the Input Selection window .
150 T r oubleshoo t in g Remote con tr ol pr oblems If you hear no sound, try setting the MTS feature to Stereo mode, see “Using the MTS button” on page 83 . If you are not receiving a second audio program from a known SAP source, make sure the MTS feature is set to SAP mode, see “Selecting stereo/SAP broadcasts” on page 82 .
151 T r oubleshoo t in g Closed caption pr oblems Closed cap t ion p r oblems If the program or video you have selected is not closed captioned, no captions appear on the screen. If text is not a vailable, a black rectangle may appear . If this happens, turn off the clos ed caption feature, see “Using closed captions” on page 78 .
152 T r oubleshoo t in g Media Player pr oblems Legacy HDMI ® sources. Some legacy HDMI ® sources may not work properly with the latest HDMI ® TV products, due to new standard adoption. Media Playe r p r oblems Incorrect functio nality may o ccur when using a USB HUB connection.
153 T r oubleshoo t in g light indicat or The audio sound track and/or subtitle language cannot be changed. The disc has no multi-lang uage option enco ded on it, see “Sound track language/Audio chan nel/Subtitle” on page 131 . No subtitle. The disc has no subtitl e encoded on it.
154 Appendix A S pecifications ❖ These models comply with the specifications listed below . ❖ Designs and specifications are subject to change without notice. ❖ These models may not be compa tible with features and/or specifications that may be added in the future.
155 Specifica t ions P ower sour ce Powe r sou r ce 120 V A C, 60 Hz Powe r maximum cu rr en t Powe r consump t ion Audio powe r Speake r t ype Video/audio t e r minals Video/audio inpu t 24V4210U 24V4260U 0.65 A 0.65 A 24V4210U 24V4260U 0.65 A (maximum current) 0.
156 Specifica t ions V ideo/audio terminals Colo r S tr eam ® (componen t video) HD inpu t V i deo Y : 1V(p-p), 75 ohm, negativ e sy nc. Y : 1V(p-p), 75 ohm, negati ve sync.
157 Specifica t ions Dimensions HDMI ® inpu t Digi t al audio ou t pu t Optical type PC inpu t 15-Pin D-sub Analog RGB DVD/CD playe r Dimensions Mass (weigh t ) Ope r a t ing condi t ions HDMI ® compliant HDCP compliant HDMI ® Audio 2 -channel Linear-PCM; 32/44.
158 Specifica t ions Supplied accessories Supplied accesso r ies ❖ Remote control with two size “ AAA” batt eries ❖ Resource Guide ❖ Quick Start Guide ❖ Pedest al sta nd ❖ Wa r r a n t y.
159 Specifica t ions Acceptable signal format s for PC IN, HDMI® ❖ Some illustrations in this User’ s Guide are for explanation purposes and may differ from the actual unit.
160 Appendix B License Agreement License Info r ma t ion on t he sof t wa r e used in t he TOSHIBA Digi t al TV The software pre-installed in the T OSHIBA Digital T elevisions consists of multiple, independent software components. Each software component is cop yrighted by TOSHIB A or a third party .
161 License Ag r eemen t or fitness for specif ic uses. All risks associat ed with the qual ity or performance of these software components are assumed by the user .
162 License Ag r eemen t (3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable consequences; the auth ors accept NO LIABILITY for damages of any kind. These conditions apply to any software deri ved fr om or based on the IJG code, not just to the unmodified library .
163 License Ag r eemen t This license was inspired by the BSD, Artistic, and IJG (Independent JPEG Group) licenses, which all encourage inclusion an d use of free software in commercial and fr eew are products alike. As a consequence, its main points are that: ❖ W e don't promise that this software works.
164 Index A adv anced picture settings CableClear® digital Noise Reduction 116 Color tempera t ure 115 Dynamic Contrast 114 Game Mode feature 117 MPEG Noise Reducti on 117 Static Gamma 115 using 114 .
165 Index tuning channels 63 Channel Return switching between two channels 68 channels auto tuning 52 locking channels 94 skipping 54 specific channel 67 storing in memo ry 52 cinema mode selecting 75.
166 Index chapter or track 123 fast re verse, fas t forward 122 frame by frame 123 slow motion 123 E Elements 65 F factory defaults reset 58 fav orit es br owser 64 features 18 Freeze feature 75 G Gam.
167 Index Dot by Dot 73 Full 70 Nati ve 72 Normal 73 selecting 69 TheaterW ide 1 71 TheaterW ide 2 71 TheaterW ide 3 71 pin code changing 87 entering PIN code 86 forgotten 87 playback modes MP3/WMA/JP.
168 Index TV panel contro ls front 20 left side 20 side 20 TV remote functionality 42 install batteries 40 TV remote control using 40 TV status information sho w 112 V video input source selecting 59 .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Toshiba 24V4210U c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Toshiba 24V4210U - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Toshiba 24V4210U, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Toshiba 24V4210U va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Toshiba 24V4210U, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Toshiba 24V4210U.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Toshiba 24V4210U. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Toshiba 24V4210U ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
