Manuel d'utilisation / d'entretien du produit 19SLV411U du fabricant Toshiba
Aller à la page of 111
19SLV411U 24SLV411U 32SLV411U For an overview of steps for se tting up your new TV , see page 11. Note: T o di splay a High Defini tion picture, the TV must be receiving a High Definition signal (suc h as an over-the-air High Definition TV broadcast, a High Definition digital cable prog ram, or a High Definition digital satellite program).
2 Dear Customer , Thank you for purchasing this T oshiba LCD TV / DVD combination. This manual will help you use the many exciting features of your new LCD TV / DVD combination. Before operating your LCD TV / DVD combination, please read this manual completely , and keep it nearby for future reference.
3 Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with dry cloth. 7) Do not block any ventilation openings.
4 23) DANGER: RISK OF SERIOUS PERSONAL INJURY , DEA TH, OR EQUIPMENT DAMAGE! Never place the TV on an unstable cart, stand, or table. The TV may fall, causing serious personal injury , death, or serious damage to the TV .
5 37) WARNING: RISK OF ELECTRIC SHOCK! Never spill liquids or push objects of any kind into the TV cabinet slots. 38) While it is thundering, do not touch the connecting cables or apparatus.
6 Removing the Pedestal Stand 1) Carefully lay the front of the TV face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand protruding over the edge of the surface. Note: Extreme car e should always be used when removing the pedestal stand to avoid damage to the LCD panel.
7 Notes on discs On handling discs • Do not touch the playback side of the disc. Handle the disc as shown in the figure below . Playback side • Do not attach paper or tape to discs. On cleaning discs • Fingerprints and dust on the disc cause picture and sound deterioration.
8 Playable discs This LCD TV / DVD combination can play the following discs. Disc mark Contents Disc size Maximum playback time DVD Video disc Audio + Video (moving pictures) 12 cm Approx. 4 hours (single sided disc) Approx. 8 hours (double sided disc) 8 cm Approx.
9 ENERGY ST AR ® User Information ENERGY ST AR User Information Statement: the fac- tory default settings of this tele vision meet ENERGY ST AR requirements. Changing Picture Settings may increase energy consumption, possibly be yond the limits required for ENERGY ST AR qualification.
10 Contents Important Safety Instructions .......................................... 3 Installation, Care, and Service ........................................ 3 Choosing a location for your LCD TV / D VD combination ............ 5 Notes on discs ....
11 Features of your new TV The follo wing are just a fe w of the many e xciting features of your ne w T oshiba widescreen, integrated HD, LCD TV / D VD combination: • Integrated digital tuning (8VSB A TSC and QAM) eliminates the need for a separate digital con verter set-top box (in most cases).
12 Chapter 1: Introduction TV front, top and side panel controls and connections 19SL V411U / 24SL V411U / 32SL V411U 4 3 5 6 7 8 9 10 1 2 9 INPUT / EXIT — Repeatedly press to change the source you are vie wing. When a menu is on- screen, the INPUT button on the TV’ s control panel functions as the EXIT button.
13 Chapter 1: Introduction 4 PC IN — For use when connecting a personal computer . 5 DIGIT AL AUDIO OUT — Optical audio output in Dolby Digital or PCM (Pulse-Code Modulation) format for connecting an external Dolby Digital decoder , amplifier , or home theater system with optical audio input.
14 Over view of cable types Cables can be purchased from most stores that sell audio/video de vices. Before purchasing any cables, be sure of connector types required by your de vices and the length of each cable.
15 Chapter 2: Connecting your TV Connecting a VCR, and antenna, Cable TV w o l l e Y e t i h W d e R w o l l e Y e t i h W d e R Y ou will need: • coaxial cables • standard A/V cables Note: When you use a Cable box, you may not be able to use the remote contr ol to program or access certain features on the TV .
16 Chapter 2: Connecting your TV Connecting a satellite receiver Red Green Blue Red White d e R l Be u Ge e rn d e R e t i h W Y ou will need: • standard audio cables • component video cables − Y ou can connect the component video cables (plus audio cables) from the satellite receiver to the COLOR STREAM HD terminal on the TV .
17 Chapter 2: Connecting your TV T o view the HDMI device video: Select the HDMI 1 or HDMI 2 video input source on the TV .* * T o select the video input source, press INPUT on the remote contr ol ( page 30).
18 Chapter 2: Connecting your TV REGZA-LINK ® connection Y ou can control the basic functions of connected audio/video de vices using the TV’ s remote control if you connect a REGZA-LINK ® compatible audio recei ver or playback de vice. For an explanation of setup and operations, see pages 50-51.
19 Chapter 2: Connecting your TV Connecting a digital audio system The TV’ s DIGITAL AUDIO OUT terminal outputs a Dolby ® * Digital or 2-channel do wn-mixed PCM (Pulse-Code Modulation) signal for use with an external Dolby ® Digital decoder or other e xternal audio system with optical audio input.
20 Chapter 2: Connecting your TV Connecting a personal computer (PC) W ith either the PC IN or HDMI connection, you can watch your computer’ s display on the TV and hear the sound from the TV’ s speakers.
21 Preparing the remote control for use The remote control can operate your LCD TV / D VD combination and control the basic functions of connected audio/video de vices if you connect a REGZA-LINK ® compatible audio recei ver or playback de vice ( page 50).
Chapter 3: Using the remote control 22 Learning about the remote control The buttons used for operating the LCD TV / DVD combination are described here. For the REGZA- LINK ® remote control functions, see the section “ Using REGZA-LINK ® ” ( page 50).
Chapter 3: Using the remote control 23 23 Arrow buttons ( STWX ) When a menu is on-screen, these buttons select or adjust programming menus. (Also see W / X .) 24 CANCEL / EXIT closes on-screen menus. 25 TOP MENU accesses the top menu of D VDs that contain two or more titles( page 60).
24 Main menu layout The tables belo w and on the next page pro vide a quick ov ervie w of your TV’ s menu system. T o open the main menus (illustrated below), press on the remote control or MENU on the TV control panel.
Chapter 4: Menu layout and navigation 25 Setup / Installation menu layout The Installation menu contains the T errestrial and System Status menus. T o open the Installation menu (illustrated below), press on the remote control or MENU on the TV control panel, open the Setup menu, select Installation , and press .
26 Initial Setup When you first turn on or reset the TV , the Initial Setup windo w will appear . 1 In the Menu Language field, press W or X to select your preferred language. 2 Press S or T to select Time Zone Setup and set your desired time zone with W or X and press .
Chapter 5: Setting up your TV 27 Note: • Y ou must configure the ANT/CABLE input sour ce before pr ogramming channels ( page 26). • The automatic channel programming process will erase channels that were pr eviously programmed into the TV’ s memor y .
Chapter 5: Setting up your TV 28 Setting the HDMI ® audio mode T o set the HDMI ® audio mode: 1 Press and open the Sound menu. 2 Highlight Audio Setup and press . 3 Press S or T to select HDMI 1 Audio and then press W or X to select the HDMI 1 audio mode ( Auto , Digital , or Analog ).
Chapter 5: Setting up your TV 29 Viewing the digital signal meter Y ou can vie w the digital signal meter in the ANT/ CABLE digital TV input source only . T o view the digital signal meter: 1 Press and open the Setup menu. 2 Highlight Installation and press .
30 Selecting the video input source to view T o select the video input source to view: 1 Press INPUT on the remote control or TV control panel. 2 And then either: a) Press 0–6 ; or b) Repeatedly pre.
Chapter 6: Using the TV’ s features 31 3 Press S or T to highlight the video source you want to label. 4 Press W or X to select the desired label for that input source.
Chapter 6: Using the TV’ s features 32 3 Press T to highlight History List , and then press W or X to select the setting you prefer: either On , or Off . Note: Histor y List will be cleared every time the TV is powered of f. 4 Press T to highlight ANT/CABLE List , and then press W or X to select On or Off .
Chapter 6: Using the TV’ s features 33 T o tune to a channel or input in Select mode: 1 While watching TV , press W or X to open the Channel Bro wser ™ and surf back to a pre vious item or forward to the ne xt item in the list.
Chapter 6: Using the TV’ s features 34 T uning to the next programmed channel T o tune to the next programmed channel: Press or on the remote control or TV control panel. Note: This feature will not work unless you program channels into the TV’ s channel memor y ( page 26).
Chapter 6: Using the TV’ s features 35 T o select the picture size using the menus: 1 Select Picture Size in the Theater Settings menu. 2 Press W or X to select the desired picture size setting.
Chapter 6: Using the TV’ s features 36 Picture Size 4:3 Some program formats will display with sidebars and/or bars at the top and bottom. Normal (for VGA, SVGA, XGA, WXGA, and SXGA sources and Photo files) “Normal” is a non-stretched display . Some input signal formats will display with sidebars and/or bars at the top and bottom.
Chapter 6: Using the TV’ s features 37 T o turn on the auto aspect ratio featur e: 1 Press and open the Picture menu. 2 Highlight Theater Settings and press . 3 In the Auto Aspect Ratio field, select On . 4 T o sav e the ne w settings, highlight Done and press .
Chapter 6: Using the TV’ s features 38 Adjusting the picture quality Y ou can adjust the picture quality (Contrast, Backlight, DynaLight ™ , Brightness, Color , T int, and Sharpness.
Chapter 6: Using the TV’ s features 39 Digital CC Settings Y ou can customize the closed caption display characteristics by changing the background color , opacity , text size, type, edge, and color . Note: • This featur e is available for digital channels only .
Chapter 6: Using the TV’ s features 40 Selecting stereo / SAP broadcasts The multi-channel TV sound (MTS) feature allo ws you to output high-fidelity stereo sound. MTS also can transmit a second audio program (SAP) containing a second language, music or other audio information (when provided by indi vidual stations).
Chapter 6: Using the TV’ s features 41 Using the Dolby ® Digital Dynamic Range Control feature This dynamic range control feature causes Dolby Digital dynamic range to be further compressed, allo wing you to switch from digital to analog broadcasts at the same dynamic range.
Chapter 6: Using the TV’ s features 42 T o block and unblock TV programs and movies: 1 Press and highlight the Locks menu icon. 2 Press T to display the PIN code entering screen. 3 Enter your four-digit PIN code and press . 4 Press T to highlight Enable Rating Blocking .
Chapter 6: Using the TV’ s features 43 Independent rating system for broadcasters Ratings Description and Content themes TV-MA Mature Audience Only (This pr ogram is specifically designed to be viewed by adults and may be unsuitable for children under 17.
Chapter 6: Using the TV’ s features 44 Unlocking programs temporarily If you try to tune the TV to a program that e xceeds the rating limits you set, the TV will enter program lock mode and the follo wing message will appear on- screen: This program exceeds the rating limit you set.
Chapter 6: Using the TV’ s features 45 Using the panel lock feature Y ou can lock the control panel to pre vent your settings from being changed accidentally (by children, for example). When the Panel Lock is On , none of the controls on the TV control panel will operate except POWER .
Chapter 6: Using the TV’ s features 46 Using the Media Player Using the Media Player with USB Y ou can enjoy photos or music contents stored on a USB storage de vice.
Chapter 6: Using the TV’ s features 47 Viewing photo files There are three types of vie w modes. Multi V iew: This vie w allo ws you to search for photos in a grid format. These pictures are displayed using thumbnail data in each image file. 1 Press STWX to mov e the highlight in one windo w .
Chapter 6: Using the TV’ s features 48 During playback • Press to pause. • T o normal playback, press or . • T o locate a specific f ile, press or repeatedly . • T o adjust volume , press / . Note: During playback, you can adjust the SOUND menu functions from the Quic k Menu .
Chapter 6: Using the TV’ s features 49 Contents Description Description Music Music list (Multi V ie w) See page 47. Sorting T o sort the folders and f iles 1 Press to open the Quick Menu . 2 Press S or T to select Sort . 3 Press W or X to select Title , New or Old to set the sorting rule.
Chapter 6: Using the TV’ s features 50 Using REGZA-LINK ® This is a ne w feature that uses CEC technology and allo ws you to control T oshiba REGZA-LINK ® compatible de vices from the TV remote via HDMI connection ( page 18).
Chapter 6: Using the TV’ s features 51 VOLUME and MUTE controls of Audio Receiver W ith your TV’ s remote control, you can adjust or mute the sound volume of the Audio Receiv er . • / adjust the volume le vel. • turns off the sound. Note: • T o use this function: − Set Speaker Preference to A udio Receiver in the REGZA-LINK Setup menu.
Chapter 6: Using the TV’ s features 52 Displaying TV status information T o display TV status inf ormation : Press on the remote control. The follo wing information will display (if applicable): • Current input ( ANT/CABLE , VIDEO , etc.
53 Using the advanced picture settings features Using Dynamic Contrast Dynamic Contrast detects changes in picture quality that af fect the appearance of your contrast settings and then automatically adjusts the video. T o select Dynamic Contrast prefer ence: 1 From the the Picture menu, highlight Picture Settings and press .
Chapter 7: Using the TV’ s advanced features 54 Using CableClear ® digital Noise Reduction The CableClear ® digital Noise Reduction feature allo ws you to reduce visible interference in your TV picture. This may be useful when recei ving a broadcast with a weak signal (especially a Cable channel) or playing a noisy video cassette or disc.
55 Disc playback This section sho ws you the basics on ho w to play a disc. Basic playback (DVD/VCD/CD)* 1 Press POWER on the TV control panel or on the remote control. The Po wer LED on the front of the LCD TV / D VD combination changes to green. It may take approximately 10 seconds for a picture to appear on-screen.
Chapter 8: Basic disc playback 56 • In some instances the LCD TV / D VD combination may take a minute or so to start disc playback. • When you load a disc with the playback side facing backward, “Reading” appears on-screen b ut it will be replaced by “Incorrect Disc”.
57 Zoom function/Scene navigation Y ou can change the vie wing scale of a picture by using the Zoom function. Once the image has been rescaled, use the arro w buttons STW X to pan the image. Scene navigation options dif fer depending on the kind of disc.
Chapter 9: Advanced disc playback 58 Scene bookmark Scene bookmarks refer to specific points in the playback range that hav e been marked for later access. Y ou can create up to three markers per disc. Note: The saved scene bookmarks are only accessible during the current session.
Chapter 9: Advanced disc playback 59 Enabling A-B repeat mode (DVD/VCD/ CD) 1 During playback, press at the point where you would like the playback loop to be gin. This sets your “ A” point. A 2 When the playback reaches the point where you would like the playback loop to stop, press again.
Chapter 9: Advanced disc playback 60 T o resume normal playback: In step 2, set Mode to Normal . T o change the program: 1. Set Mode to Program . 2. Press W or X , then S or T to select the playback position you want to change the track input for , then press .
Chapter 9: Advanced disc playback 61 Soundtrack language/Audio channel/Subtitle Selecting a soundtrack language (DVD) Y ou can select the soundtrack language when you play a multilingual D VD. During playback, press repeatedly until the preferred language track is selected.
Chapter 9: Advanced disc playback 62 MP3, WMA, JPEG, and Audio CD operation This LCD TV / DVD combination can play MP3, WMA, and JPEG files recor ded on a CD-R or CD-RW disc. T o create the MP3/ WMA/ JPEG disc, you need a Windows PC with a CD-R W drive and file encoding software.
Chapter 9: Advanced disc playback 63 About the file browser (CD) File icons Music file (MP3/WMA/Audio CD track) Picture file (JPEG) If a CD contains a mixture of MP3, WMA and JPEG files, and is pressed without selecting a f ile, playback automatically begins starting from the f irst file in the list.
Chapter 9: Advanced disc playback 64 Viewing a JPEG file (CD) 1 Load a disc containing JPEG files in the disc slot. The file bro wser appears on-screen. 2 Press S or T to select an image file for vie w . A pre vie w of the selected file is displayed in the Pre vie w panel.
Chapter 9: Advanced disc playback 65 MP3, WMA, JPEG and Audio CD playback modes Y ou can choose to repeat CD playback by track or the entire disc. Y ou can also program the file playback sequence or set the LCD TV / D VD combination to play files at random.
Chapter 9: Advanced disc playback 66 Programming the playback sequence (CD) 1 In the Option panel of the file bro wser , press S or T to select Edit Mode , then press .
67 Customizing disc playback Y ou can customize the disc playback settings to suit your preferences. Configuring the disc playback settings (DVD/VCD/CD) 1 In D VD mode, press during stop mode. Parental : Off Set Pass word Output : Interlace DivX(R) VOD DRC : Off QSound : On E.
Chapter 10: Customizing disc playback 68 Disc playback setup ) / '*+ ';'<==>'.
Chapter 10: Customizing disc playback 69 Set Password Output : Interlace DivX(R) VOD QSound : On Menu : English Subtitle : English Audio : English Display :On Picture Mode :Auto JPEG Interval :Off .
Chapter 10: Customizing disc playback 70 !!!!!!!!!!!!!Tfu!Qbtt xpse Pvuqvu! ; !Joufsmbdf !!!!!!!!!!!!!!EjwY)S*! WPE Nfov! ; !Fohmjti Tvcujumf! ; !Fohmjti Bvejp! ; !Fohmjti UW!Tdsffo! ; !5;4! Ejtqmbz! .
Chapter 10: Customizing disc playback 71 + }L?[=>.
72 General troubleshooting Before calling a service technician, please check this chapter for a possible cause of the problem and some solutions you can try .
Chapter 11: T roubleshooting 73 • K=>'^QL@Q?XLQ{['L_L+]';'<='[]*L=.
74 Specifications Note: • These models comply with the specifications listed below . • Designs and specifications are subject to change without notice. • These models ma y not be compatible with features and/or specifications that ma y be added in the future.
75 Chapter 12: Appendix Acceptable signal formats for PC IN and HDMI terminals PC IN signal f ormats Note: Depending on the connected PC, the following status may occur; incorrect display , false for mat detection, picture position failur e, blur , or judder .
76 Chapter 12: Appendix Limited United States W arranty for LCD TV/DVD Combination L]>q? X'Q<?*KLQX?=L*_]='X]*< X?x&a.
77 Chapter 12: Appendix "| " | | .
78 Chapter 12: Appendix CORPORA TION, THEIR AFFILIA TES, ADRs AND ASPs AND WHETHER MADE ORALL Y OR IN WRITING (INCLUDING ANY ST A TEMENT IN ANY BROCHURE, PRESS RELEASE, ANNOUNCEMENT , AD VER TISEMENT , POINT OF SALE DISPLA Y , ETC.
79 Chapter 12: Appendix *KLQX?=L*_L+*[=>?=]'Q{<']*''['[^;'?]' <L*=?<= +]=LX'Q+^^LQ==L;;.
80 Chapter 12: Appendix ?z>L;'?=*L<>?Q@'=L?;;=>Q[^?Q=']+*['Q=>'='QX] LK=>]<'*]' <.
81 Chapter 12: Appendix =X'+<>*'z{'Q]L*]z;;q']X;?Q*]^Q==L=>'^Q']'*= {'Q]L*q+=X?_[KK'Q*.
82 Chapter 12: Appendix +=>LQ]~ XL*'QQ'?['+ Q<?_XL*[ |;;'] L;;?*= ?*[z=>=>'KL;;Lz*@?[[=L*]=L=>&ap.
Note.
726+,%$$0(5,&$,1) 250$ 7,21 6 <67(06,1& Corporate Headquaters: 9740 IRVINE BL VD.; IRVINE, CA 92618 U.S.A. Visual Pr oducts Service and Suppor t Dept: 1420-B TOSHIBA DRIVE, LEBANON, TN 37087, U.
TOSHIBA Leading Innovation »> Easy Setup Guide Integrated High Definition LCD TV/DVD Combination Homl® t·DT./ III DOLB'l HIGH . .,mNJTlOH MU. ""'OlA 'NlEn, "C< HI!;""'''''' ';'LEv.
www.CE.org/safety tt Makes A Difference How. and Where You Use Your Flat Panel Display Wall Mounting: If you decide to wall mount your flat panel display, always: • Use a mount that has been recommended by the display manufacturer and/or listed by an independent laboratory (such as UL, CSA, ETL).
Important Safety Instructions 1) Read these instructions. r- 'y-~-;~~--h' ( 1Il L:: 2) Keep these instructions. "',j, 3) Heed all warnings. ( 4) Follow all instructions. . __ .. - .. _._- ._._- _ -._ .. _ _ _--_ .. - 5) Do not use this apparatus near water.
( continued) 34) If you use the TV in a room whose temperature is 32 of (0 °C) or below, the picture brightness may vary until the LCD warms up. This is not a sign of malfunction, 35) Always unplug the TV before cleaning. When cleaning your TV, please first remove any dirt or dust from the surface.
M4 lOOxlOO mm 19" • Upon completion of service, ask the service technician to perform routine safety checks to determine that the TV is in safe operating condition.
o o 0 o o o Never use the unit when moisture condensation may occur. Using the unit when moisture condensation exists may damage discs and internal parts. Connect the power cord of the unit to the wall outlet, turn on the unit, remove the disc, and leave it for two or three hours.
DVD DVD Notes on copyright The unauthorized recording, use, distribution, or revision of copyrighted materials including, without limitation, television programs, videotapes, and DVDs, is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.
Playable discs This LCD TV / DVD combination can play the following discs. Disc Contents Disc Maximum mark size playback time Approx. 4 hours 12 cm (single sided disc) Audio Approx. 8 hours DVD 2VD + (double sided disc) Video Video Approx. 80 minutes disc v IDEO (moving pictures) 8cm (single sided disc) Approx.
CLASS 1 LASER PRODUCT ENERGY STAR@ User Information ENERGY STAR User Information Statement: the fac- tory default settings of this television meet ENERGY STAR requirements. Changing Picture Settings may increase energy consumption, possibly beyond the limits required for ENERGY STAR qualification.
TV front TV front, top and side panel controls and connections 19SLV411 U / 24SLV411 U / 32SLV411 U Left side panel r~-"~-·~'·""", I .' 4-; EJECT i 5-{] I • 6-jPL(Y 7 --+s~~p 8_:M~~LI i 9-;'~~T~1 i 10~POSER: i I ' .
TV back panel connections 19SLV411U 32SLV411 U (Please use this illustration for 24SLV411U model.) I I 5 6 I 4 I 3 1 AUDIO/COLOR STREAM HD - ColorStream® 4 PC IN - For use when connecting a personal high-definition component video inputs (with computer.
Learning about the remote control Note: The error message "NOT AVAILABLE" may appear if you press a key for a function that is not available. The buttons used for operating the LCD TV / DVD combination are described here. For the REGZA- LINK!0 remote control functions.
22 - 25 1 3 4 6 23 --- 24 23 Arrow buttons (. T ~~) When a menu is on-screen. these buttons select or adjust programming menus. (Also see ~ / ~.) CANCEL 24 CANCEL / EXIT 8 closes on-screen menus. TOP MENU 25 TOP MENU 0 accesses the top menu of DVDs that contain two or more titles.
Initial Setup When you first turn on or reset the TV, the Initial Setup window will appear. 1 In the Menu Language field, press .... or ~ to select your preferred language. 2 Press'" or .... to select Time Zone Setup and set your desired time zone with .
Specifications Note: • These models comply with the specifications listed below. • Designs and specifications are subject to change without notice. • These models may not be compatible with features and/or specifications that may be added in the future.
Acceptable signal formats for PC IN and HDMI terminals PC IN signal formats Note: Depending on the connected PC, the following status may occur; incorrect display, false format detection, picture position failure, blur, or judder. But this is not a malfunction of your TV Format Resolution V.
Limited United States Warranty for LCD TV/DVD Combination Toshiba America Information Systems, Inc. ("TAIS") makes the following limited warranties to original consumers in the United States.
THIS LIMITED WARRANTY GIVES YOU SPECIFIC lEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE IN THE U.S.A. SOME STATES OF THE U.S.A. DO NOT AllOW LIMITATIONS ON THE DURATION OF AN IMPLIED WARRANTY, WHEN AN ACTION MAY BE BROUGHT, OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES.
ANY STATEMENT IN ANY BROCHURE, PRESS RELEASE, ANNOUNCEMENT, ADVERTISEMENT, POINT OF SALE DISPLAY, ETC.). YOU MUST READ AND FOLLOW ALL SET-UP AND USAGE INSTRUCTIONS IN THE APPLICABLE USER GUIDES ANDIOR MANUALS. IF YOU FAIL TO DO SO, THIS TELEVISION MAY NOT FUNCTION PROPERLY AND YOU MAY SUFFER DAMAGE.
A copy of the GPL source code in this product may be obtained by contacting Toshiba Consumer Solutions at (800) 631-3811. There will be a charge to cover the costs of providing the source code. A copy of the LGPL source code in this product may be obtained by contacting Toshiba Consumer Solutions at (800) 631-3811.
c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcemen.
Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation.
and with the following additions to the disclaimer: There is no warranty against interference with your enjoyment of the library or against infringement. There is no warranty that our efforts or the library will fulfill any of your particular purposes or needs.
TOSHIBA AMERICA INFORMATION SYSTEMS J INC. Corporate Hcadquaters: 9740 IRVINE BLVD, IRVINE, CA 92618 U.S.A. Visual Products Service and Support Dept 1420-B TOSHIBA DRIVE, LEBANON, TN 37087, U.S.A. TOSHIBA OF CANADA LTD. HEAD OFFICE 191 McNABB STREET, MARKHAM, ONTARIO, L3R 8H2.
T I ASSEMBLY INSTRUCTIONS/INSTRUCTIONS DE MONTAGE Xl 1 i x4 2 WARNING: To prevent possible electric shock, protect the power cord from being pinched when attaching the pedestal stand. CAUTION: Before beginning pedestal assembly, carefully lay the front of the LCD Panel face down on a flat, cushioned surface such as a quilt or blanket.
If you are experiencing a technical problem or have questions regarding operation, Authorized Service Providers, warranty or parts, please contact our Customer Service Department at: 1-(800) 631-3811 .
HDTV Quick Set-Up Guide {For US customers} it WARNING: The Owner's Manual contains important safety precautions not included in this Guide, please review completely prior to using this produd. Congratulations on the purchase of your new Toshiba High~Definition Television.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Toshiba 19SLV411U c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Toshiba 19SLV411U - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Toshiba 19SLV411U, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Toshiba 19SLV411U va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Toshiba 19SLV411U, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Toshiba 19SLV411U.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Toshiba 19SLV411U. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Toshiba 19SLV411U ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
