Manuel d'utilisation / d'entretien du produit DA-45HR du fabricant Tascam
Aller à la page of 32
» D A -45HR Digital A udio T ape Dec k O WNER’S MANU AL CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE.
2 TASCAM DA-45HR Important Safety Precautions IMPOR T ANT (f or U .K. Customers) DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer.
TASCAM DA-45HR 3 CA UTION: … Read all of these Instructions. … Save these Instructions f or later use . … Follow all W arnings and Instructions marked on the audio equipment. 1) Read Instructions — All the safety and operating instructions should be read before the product is operated.
4 TASCAM DA-45HR Table of Contents Table of Contents 1 - Introduction to the DA-45HR 1.1 Features ............................................. 6 1.2 Unpacking and inspection ............... 6 1.3 Installation of the tape deck ............ 6 1.4 About DAT cassettes .
Table of Contents TASCAM DA-45HR 5 4.8.2 Writing the title to tape ...................... 27 4.8.3 Checking a title .................................. 27 4.8.4 Deleting a title .................................... 27 4.8.5 Copying and pasting a title .
6 TASCAM DA-45HR 1 - Introduction to the DA-45HR The D A-45HR Digital Audio T ape (D A T) deck is referred to throughout this manual as “the tape deck”. Please make a note of the dif ferent sections of this manual to assist you in locating the function you need.
1 - Introduction to the DA-45HR TASCAM DA-45HR 7 Fingerprints on the tape may cause wear and damage to the tape deck heads. D A T cassettes can only be loaded and unloaded when the tape deck is switched on. Do not leav e cas- settes in the deck when the deck is switched of f.
1 - Introduction to the DA-45HR 8 TASCAM DA-45HR the word cloc k master f or a digital audio setup , any w ord clock sla ves should receiv e the clock through the digital audio signal.
TASCAM DA-45HR 9.
10 TASCAM DA-45HR 2 - Parts of the tape deck NO TES As well as pro viding details of the settings made with s witches, etc., this section also provides the inf or mation necessar y for basic operations of the tape dec k. Although the operation of the transport keys , etc.
2 - Parts of the tape deck TASCAM DA-45HR 11 [5] RECORD MODE switc h Use this switch to choose between HR(24BIT) and STANDARD . The HR(24BIT) setting records with 24 bits of resolution.
2 - Parts of the tape deck 12 TASCAM DA-45HR [9] ANALOG INPUT selector switc h When the INPUT switch [7] is set to ANALOG , this switch is used to select between UNCAL and CAL .
2 - Parts of the tape deck TASCAM DA-45HR 13 [15] PLA Y key Use this ke y to start playing when the tape is stopped or paused, or to start recording when the tape is in record pause mode (see belo w). The indicator abov e the key will light when the tape is playing back.
2 - Parts of the tape deck 14 TASCAM DA-45HR the RECORD indicator will flash, and all input to the tape will be muted. After a number of seconds (defined in the menu RecMut function—see 3.4, "Record mute time"), the tape deck will enter the record ready mode (the record and pause indicators will both be lit).
2 - Parts of the tape deck TASCAM DA-45HR 15 [22] CHAR If characters hav e been recorded on the tape as a tape or program title, pressing this ke y will allo w the tape deck to display these characters, scrolling across the display , as the ST AR T ID containing the title is played back.
2 - Parts of the tape deck 16 TASCAM DA-45HR [29] LOC 1 Pressing this ke y will locate the tape to the first mem- ory location (set with this ke y in shifted mode). If the tape is playing when this ke y is pressed, the tape will resume playing when the location is reached, other- wise it will stop.
2 - Parts of the tape deck TASCAM DA-45HR 17 [37] REMO TE IN This 3.5 mm jack is used to connect the optional RC- D45 remote control unit. Do not use this jack to connect any remote control unit other than one designed especially for use with the tape deck.
18 TASCAM DA-45HR 3 - Menu functions The menu facilities on the tape deck allo w common settings to be made. Repeated presses of MENU [28] will cycle through the dif ferent menu items listed here in the order pre- sented here.
3 - Menu functions TASCAM DA-45HR 19 3.6 Digital output f ormat Sets the format of the digital audio data output from both digital audio outputs (the AES/EBU XLR con- nector and the CO AXIAL RCA connector). The options av ailable are AESEBU (AES/EBU format) and Consmr (SPDIF format).
3 - Menu functions 20 TASCAM DA-45HR 3.11 HR time display When recording or playing back in the HR(24BIT) mode, the tape mov es at twice the normal speed. The tape counter can use the subcode recorded on the tape as its reference, meaning that the displayed time passes twice as fast as real time, or it can display real time.
3 - Menu functions TASCAM DA-45HR 21 3.17 P arameter save Sav es the follo wing parameters so that they become the default parameters when the tape deck is ne xt po wered up: • Single Play • Skip Play • Repeat Mode When this menu item is first displayed, the right side of the display sho ws: ---- .
22 TASCAM DA-45HR 4 - Advanced functions The more adv anced functions of the tape deck are typically accessed by pressing SHIFT [32] so that the indicator is lit. While the indicator is lit, the command ke ys take on their shifted function, labeled in blue abov e the key .
4 - Advanced functions TASCAM DA-45HR 23 • CHAR, which allo ws the writing of alphanumeric characters (up to 60) which are associated with a ST AR T ID on the tape, which will be shown on the display when that part of the tape is replayed. These can be used as tape (if written at the first ST AR T ID) or program titles.
4 - Advanced functions 24 TASCAM DA-45HR Press PLA Y to previe w the location of the ID point. The tape will re wind to the position, with the offset added or subtracted, and start playing back from the pre viewed ID position. While playing back, the word Posit will be sho wn on the display .
4 - Advanced functions TASCAM DA-45HR 25 Y ou can start the tape’ s program numbers from a v alue different from 01 by turning the D ATA dial. The program number selected with the DATA dial will flash (the flashing will continue for five seconds).
4 - Advanced functions 26 TASCAM DA-45HR 4.7 Pr ogram mode T o play back a selection of programs in a defined order , press EDIT until the follo wing is shown on the display: NO TE The program n umbers f or programmed pla y- back are tak en from the ST ART IDs.
4 - Advanced functions TASCAM DA-45HR 27 "# $ % &' ( ) * + , - . / _ and the space character . T o change between uppercase and lowercase alpha- betical characters, use the CAPS key . The word CAPS appears at the bottom left of the display when the “caps lock” is on.
28 TASCAM DA-45HR 5 - RC-D45 remote control unit (option) The optional RC-D45 remote control unit is plugged into the REMO TE IN [37] jack at the rear of the tape deck. Most of the controls on the remote control unit dupli- cate the controls on the main tape deck.
5 - RC-D45 remote control unit (option) TASCAM DA-45HR 29 [66] LOC 1 and LOC 2 keys Equi valent to the LOC 1 [29] and LOC 2 [30] on the main unit. [67] REC MUTE Equi valent to the REC MUTE key [18] on the main unit. [68] ST OP Equi valent to the ST OP key [14] on the main unit.
30 TASCAM DA-45HR 6 - Specifications 6.1 A udio specifications 6.2 I/O specifications 6.3 Ph ysical specifications Changes to specifications and features may be made without notice or obligaiton.
6 - Specifications TASCAM DA-45HR 31 6.4 Dimensional drawing 6.5 Err or messages There are two types of error message: warning (informa- tional) and more serious messages.
TEAC CORPORATION Phone: (0422) 52-5082 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan TEAC AMERICA, INC. Phone: (213) 726-0303 7733 Telegraph Road, Montebello, California 90640 TEAC CANADA LTD. Phone: 905-890-8008 Facsimile: 905-890-9888 5939 Wallace Street, Mississauga, Ontario L4Z 1Z8, Canada TEAC MEXICO, S.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Tascam DA-45HR c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Tascam DA-45HR - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Tascam DA-45HR, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Tascam DA-45HR va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Tascam DA-45HR, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Tascam DA-45HR.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Tascam DA-45HR. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Tascam DA-45HR ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
