Manuel d'utilisation / d'entretien du produit 1012G-MTF du fabricant SUPER MICRO Computer
Aller à la page of 114
S UPER ® A+ SER VER 1012G-MTF USER'S MANUAL Revision 1.0c.
The information in this User ’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates.
Preface About This Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the A+ Server 1012G-MTF . Installation and maintenance should be performed by experienced technicians only .
A+ SERVER 1012G-MTF USER'S MANUAL iv Chapter 6: Advanced Chassis Setup Refer to Chapter 6 for detailed information on the SC813MTS-350CBP chassis. Y ou should follow the procedures given in this chapter when installing, removing or reconguring Serial A T A or peripheral drives and when replacing system power supply units and cooling fans.
v Preface Notes.
vi A+ SERVER 1012G-MTF USER'S MANUAL Contents Chapter 1 Introduction 1-1 Overview ......................................................................................................... 1-1 1-2 Motherboard Features .............................
vii T able of Contents 2-6 Checking the Motherboard Setup ................................................................... 2-8 2-7 Checking the Drive Bay Setup ........................................................................ 2-9 Chapter 3 System Interface 3-1 Overview .
viii A+ SERVER 1012G-MTF USER'S MANUAL 5-4 I/O Ports .......................................................................................................... 5-4 5-5 Processor and Heatsink Installation ..........................................
T able of Contents ix Onboard Speaker Enable/Disable ............................................................ 5-21 Compact Flash Master/Slave Select ........................................................ 5-22 W atch Dog Enable/Disable ..........
x A+ SERVER 1012G-MTF USER'S MANUAL Chapter 7 BIOS 7-1 Introduction ...................................................................................................... 7-1 7-2 Main Menu .........................................................
Chapter 1 Introduction 1-1 Overview The A+ Server 1012G-MTF is a short-depth server comprised of two main subsystems: the SC813MTS-350CBP 1U chassis and the H8SGL-F motherboard. Please refer to our web site for information on operating systems that have been certied for use with the A+ Server 1012G-MTF (www.
1-2 A+ SERVER 1012G-MTF USER'S MANUAL 1-2 Motherboard Features At the heart of the A+ Server 1012G-MTF lies the H8SGL-F , a single processor motherboard based on the AMD ® SR5650 and SP5100 Southbridge chipsets. This chipset functions as a Media and Communications Processor (MCP).
1-3 Chapter 1: Introduction Other Features Other onboard features that promote system health include onboard voltage monitors, a chassis intrusion header , 3-phase switching voltage regulators, chassis and CPU overheat sensors, Thermal Monitor 2 (TM2) support and a BIOS ash upgrade utility .
1-4 A+ SERVER 1012G-MTF USER'S MANUAL Figure 1-1. AMD SR5650/SP5100 Chipset: System Block Diagram Cooling System The SC813 chassis has an innovative cooling design that features four 4-cm high- performance system cooling fans. Each of these fans plug into a chassis fan header on the motherboard.
1-5 Chapter 1: Introduction 1-4 Contacting Supermicro Headquarters Address: Super Micro Computer , Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. T el: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.
1-6 A+ SERVER 1012G-MTF USER'S MANUAL Notes.
Chapter 2: Server Installation 2-1 Chapter 2 Server Installation 2-1 Overview This chapter provides a quick setup checklist to get your A+ Server 1012G-MTF up and running. Following the steps in the order given should enable you to have the system operational within a minimal amount of time.
2-2 A+ SERVER 1012G-MTF USER'S MANUAL Choosing a Setup Location • Leave enough clearance in front of the rack to enable you to open the front door completely (~25 inches) and approximately 30 inches of clearance in the back of the rack to allow for sufcient airow and ease in servicing.
Chapter 2: Server Installation 2-3 Rack Mounting Considerations Ambient Operating T emperature If installed in a closed or multi-unit rack assembly , the ambient operating temperature of the rack environment may be greater than the ambient temperature of the room.
2-4 A+ SERVER 1012G-MTF USER'S MANUAL 2-5 Installing the System into a Rack This section provides information on installing the A+ Server 1012G-MTF into a rack unit with the rack rails provided. If the server has already been mounted into a rack, you can skip ahead to Sections 2-6 and 2-7.
Chapter 2: Server Installation 2-5 Installing the Rack Rails Determine where you want to place the A+ Server 1012G-MTF in the rack ( see Rack and Server Precautions in Section 2-3). Position the chassis rail guides at the desired location in the rack, keeping the sliding rail guide facing the inside of the rack.
2-6 A+ SERVER 1012G-MTF USER'S MANUAL Figure 2-2. Installing the Server into a Rack (with optional front bezel shown) Installing the Server into the Rack Y ou should now have rails attached to both the chassis and the rack unit. The next step is to install the server into the rack.
Chapter 2: Server Installation 2-7 Figure 2-3. Installing the Server into a T elco Rack (with optional front bezel shown) Installing the Server into a T elco Rack T o install the A+ Server 1012G-MTF into a T elco type rack, use two L-shaped brackets on either side of the chassis (four total).
2-8 A+ SERVER 1012G-MTF USER'S MANUAL Figure 2-4. T ypical Server with T op Cover Open 2-6 Checking the Motherboard Setup After you install the 1012G-MTF in the rack, you will need to open the unit to make sure the motherboard is properly installed and all the connections have been made.
Chapter 2: Server Installation 2-9 Checking the Components 1. Y ou may have the processor already installed into the system board. The processor should have its own heatsink attached. See Chapter 5 for instructions on processor installation. 2. Y our 1012G-MTFF server system may have come with system memory already installed.
2-10 A+ SERVER 1012G-MTF USER'S MANUAL Note: Depending upon your system's conguration, your system may have one or more drives already installed.
Chapter 3: System Interface 3-1 Chapter 3 System Interface 3-1 Overview There are several LEDs on the control panel as well as others on the SAS/SA T A drive carriers to keep you constantly informed of the overall status of the system as well as the activity and health of specic components.
3-2 A+ SERVER 1012G-MTF USER'S MANUAL 3-3 Control Panel LEDs The control panel located on the front of the SC813MTS-350CBP chassis has ve LEDs.
Chapter 3: System Interface 3-3 Power Indicates power is being supplied to the system's power supply units. This LED should normally be illuminated when the system is operating. 3-4 Drive Carrier LEDs Each drive carrier has two LEDs for its SA T A drives.
3-4 A+ SERVER 1012G-MTF USER'S MANUAL Notes.
4-1 Chapter 4: W arning Statements for AC Systems Chapter 4 Standardized W arning Statements for AC Systems 4-1 About Standardized W arning Statements The following statements are industry standard warnings, provided to warn the user of situations which have the potential for bodily injury .
4-2 A+ SERVER 1012G-MTF USER'S MANUAL W arnung WICHTIGE SICHERHEITSHINWEISE Dieses W arnsymbol bedeutet Gefahr . Sie benden sich in einer Situation, die zu V erletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen V erfahren zur V orbeugung vor Unfällen vertraut.
4-3 Chapter 4: W arning Statements for AC Systems 4-3 안전을 위한 주의사항 경고! 이 경고 기호는 위험이 있음을 알려 줍니다. 작업자의 신체에 부상을 야기 할 수 있는 상태에 있게 됩니다.
4-4 A+ SERVER 1012G-MTF USER'S MANUAL Installation Instructions W arning! Read the installation instructions before connecting the system to the power source. W arnung V or dem Anschließen des Systems an die Stromquelle die Installationsanweisungen lesen.
4-5 Chapter 4: W arning Statements for AC Systems Circuit Breaker W arning! This product relies on the building's installation for short-circuit (overcurrent) protection.
4-6 A+ SERVER 1012G-MTF USER'S MANUAL Power Disconnection W arning 電源切断の警告 システムコン ポ ー ネン トの 取り 付 けまた は 取り外しの た め に 、 シャ.
4-7 Chapter 4: W arning Statements for AC Systems ¡Advertencia! El sistema debe ser disconnected de todas las fuentes de energía y del cable eléctrico quitado de los módulos de fuente de alimentación antes de tener acceso el interior del chasis para instalar o para quitar componentes de sistema.
4-8 A+ SERVER 1012G-MTF USER'S MANUAL Equipment Installation 機器の設置 ト レーニン グを受 け認 定 さ れた人だけが こ の 装 置の 設 置、 交 換、 ま たはサー.
4-9 Chapter 4: W arning Statements for AC Systems ア ク セ ス制限区域 こ のユニ ッ ト は、 ア ク セ ス制限区域に 設置 さ れ る こ と を想定 し て い ま す 。 .
4-10 A+ SERVER 1012G-MTF USER'S MANUAL Battery Handling W arning! There is the danger of explosion if the battery is replaced incorrectly . Replace the battery only with the same or equivalent type recommended by the manufacturer .
4-1 1 Chapter 4: W arning Statements for AC Systems W arnung Bei Einsetzen einer falschen Batterie besteht Explosionsgefahr . Ersetzen Sie die Batterie nur durch den gleichen oder vom Hersteller empfohlenen Batterietyp. Entsorgen Sie die benutzten Batterien nach den Anweisungen des Herstellers.
4-12 A+ SERVER 1012G-MTF USER'S MANUAL W arnung Dieses Gerät kann mehr als eine Stromzufuhr haben. Um sicherzustellen, dass der Einheit kein trom zugeführt wird, müssen alle V erbindungen entfernt werden. ¡Advertencia! Puede que esta unidad tenga más de una conexión para fuentes de alimentación.
4-13 Chapter 4: W arning Statements for AC Systems Backplane V oltage バッ ク プレ ーン の 電 圧 シ ステ ムの稼 働中 は危険な電 圧 ま たは電力 が、 バ ッ ク プ レ .
4-14 A+ SERVER 1012G-MTF USER'S MANUAL Comply with Local and National Electrical Codes W arning! Installation of the equipment must comply with local and national electrical codes.
4-15 Chapter 4: W arning Statements for AC Systems Product Disposal W arning! Ultimate disposal of this product should be handled according to all national laws and regulations. יצראה למשחה יקוח םואית !הרהזא תנקתה םייצראהו םיימוקמה למשחה יקוחל תמאות תויהל תביי ח דוי צה .
4-16 A+ SERVER 1012G-MTF USER'S MANUAL W aarschuwing De uiteindelijke verwijdering van dit product dient te geschieden in overeenstemming met alle nationale wetten en reglementen. ¡Advertencia! Al deshacerse por completo de este producto debe seguir todas las leyes y reglamentos nacionales.
4-17 Chapter 4: W arning Statements for AC Systems W arnung Die Lüfter drehen sich u. U. noch, wenn die Lüfterbaugruppe aus dem Chassis genommen wird. Halten Sie Finger , Schraubendreher und andere Gegenstände von den Öffnungen des Lüftergehäuses entfernt.
4-18 A+ SERVER 1012G-MTF USER'S MANUAL W arning! When installing the product, use the provided or designated connection cables, power cables and AC adaptors.
4-19 Chapter 4: W arning Statements for AC Systems Attention Lors de l'installation du produit, utilisez les bables de connection fournis ou désigné. L'utilisation d'autres cables et adaptateurs peut provoquer un dysfonctionnement ou un incendie.
4-20 A+ SERVER 1012G-MTF USER'S MANUAL Notes.
Chapter 5: Advanced Motherboard Setup 5-1 Chapter 5 Advanced Motherboard Setup This chapter covers the steps required to install the H8SGL-F motherboard into the chassis, connect the data and power cables and install add-on cards. All jumpers and connections are described and a layout and quick reference chart are included for your reference.
5-2 A+ SERVER 1012G-MTF USER'S MANUAL 5-2 Motherboard Installation This section describes mounting the H8SGL-F into the SC813MTS-350CBP chassis. Be sure theh chassis is not connected to AC power . Installing to the Motherboard 1. Remove the the chassis cover .
Chapter 5: Advanced Motherboard Setup 5-3 Connecting Power Cables The H8SGL-F has a 24-pin primary power supply connector (JPW1) for connection to the A TX power supply . In addition, an 8-pin processor power connector (JPW2) must also be connected to your power supply .
5-4 A+ SERVER 1012G-MTF USER'S MANUAL 5-4 I/O Ports The I/O ports are color coded in conformance with the PC 99 specication. See Figure 5-2 below for the colors and locations of the various I/O ports. Figure 5-2. I/O Ports 1 2 5 4 3 6 7 8 Rear I/O Ports 1.
Chapter 5: Advanced Motherboard Setup 5-5 Installing the Processors 1. Begin by removing the cover plate that protects the CPU. Lift the lever on the CPU socket until it points straight up. 2. With the lever raised, lift open the silver CPU retention plate.
5-6 A+ SERVER 1012G-MTF USER'S MANUAL T riangle 3. Use your thumb and your index nger to hold the CPU. Locate and align pin 1 of the CPU socket with pin 1 of the CPU. Both are marked with a triangle. 4. Align pin 1 of the CPU with pin 1 of the socket.
Chapter 5: Advanced Motherboard Setup 5-7 Installing a Passive CPU Heatsink 1. Do not apply any thermal grease to the heatsink or the CPU die -- the required amount has already been applied. 2. Place the heatsink directly on top of the CPU so that the heat sink screws are aligned with the mounting holes on the back plate.
5-8 A+ SERVER 1012G-MTF USER'S MANUAL 5-6 Installing Memory Installing Memory 1. Insert each memory module vertically into its slot, paying attention to the notch along the bottom of the module to prevent inserting the module incorrectly (see Figure 2-1).
Chapter 5: Advanced Motherboard Setup 5-9 Maximum Memory The H8SGL-F motherboard supports up to 256 GB of registered ECC or 64 GB of unbuffered ECC/non-ECC SDRAM in eight (8) DIMM slots.
5-10 A+ SERVER 1012G-MTF USER'S MANUAL Note 2 : Due to memory allocation to system devices, the amount of memory that remains available for operational use will be reduced when 4 GB of RAM is used. The reduction in memory availability is disproportional.
Chapter 5: Advanced Motherboard Setup 5-1 1 5-8 Motherboard Details Figure 5-5. H8SGL-F Motherboard Layout (not drawn to scale) Notes: • Jumpers not indicated are for test purposes only . • Not all ports, jumpers or LED Indicators are available on all motherboards.
5-12 A+ SERVER 1012G-MTF USER'S MANUAL H8SGL-F Quick Reference Jumper Description Default Setting JBT1 CMOS Clear (See Section 5-10) JCF1 Compact Flash Master/Slave Closed (Master) JD1 Power LED .
Chapter 5: Advanced Motherboard Setup 5-13 Connector Description COM1/COM2 COM1 Serial Port/Header F AN 1-6 Chassis/CPU Fan Headers IDE#1 IDE Disk Drive Connector IPMB System Management Bus Header for.
5-14 A+ SERVER 1012G-MTF USER'S MANUAL 5-9 Connector Denitions Power Connectors A 24-pin main power supply connector(JPW1) and three 8-pin CPU PWR connector (JPW2) on the motherboard.
Chapter 5: Advanced Motherboard Setup 5-15 NIC2 (LAN2) LED The LED connections for LAN2 are on pins 9 and 10 of JF1. Attach LAN LED cables to display network activity . See the table on the right for pin denitions. HDD LED The HDD LED connection is located on pins 13 and 14 of JF1.
5-16 A+ SERVER 1012G-MTF USER'S MANUAL Universal Serial Bus Ports T wo Universal Serial Bus ports (USB 2.0) are located beside the Keyboard and Mouse PS2 ports. T wo additional T ype A ports (USB2/3) are included on the motherboard. See the table on the right for pin denitions.
Chapter 5: Advanced Motherboard Setup 5-17 W ake-On-LAN The W ake-On-LAN header is designated JWOL. See the table on the right for pin denitions. Y ou must have a LAN card with a W ake-On-LAN connector and cable to use the W ake-On-LAN feature.
5-18 A+ SERVER 1012G-MTF USER'S MANUAL A TX PS/2 Keyboard and PS/2 Mouse Ports The A TX PS/2 keyboard and PS/2 mouse are located next to the Back Panel USB Ports 0~3 on the motherboard.
Chapter 5: Advanced Motherboard Setup 5-19 Compact Flash Card PWR Connector A Compact Flash Card Power Connector is located at JWF1. For the Compact Flash Card to work properly , you will need to enable with JCF1 and connect a Compact Flash Card power cable to JWF1 rst.
5-20 A+ SERVER 1012G-MTF USER'S MANUAL 5-10 Jumper Settings Explanation of Jumpers T o modify the operation of the motherboard, jumpers can be used to choose between optional settings. Jumpers create shorts between two pins to change the function of the connector .
Chapter 5: Advanced Motherboard Setup 5-21 VGA Enable/Disable JPG1 allows you to enable or disable the VGA port. The default position is on pins 1 and 2 to enable VGA.
5-22 A+ SERVER 1012G-MTF USER'S MANUAL W atch Dog Enable/Disable JWD enables the W atch Dog function, a system monitor that takes action when a software application freezes the system. Jumping pins 1-2 will have WD reboot the system if a program freezes.
Chapter 5: Advanced Motherboard Setup 5-23 5-1 1 Onboard Ind icators LAN1/LAN2 LEDs The Ethernet ports (located beside the VGA port) have two LEDs. On each Gb LAN port, one LED blinks to indicate activity while the other may be green, amber or off to indicate the speed of the connection.
5-24 A+ SERVER 1012G-MTF USER'S MANUAL 5-12 IDE and SA T A Drive Connections Use the following information to connect the IDE hard disk drive cables.
Chapter 5: Advanced Motherboard Setup 5-25 5-13 Enabling SA T A RAID Now that the hardware is set up, you must install the operating system and the SA T A RAID drivers, if you wish to use RAID with your SA T A drives.
5-26 A+ SERVER 1012G-MTF USER'S MANUAL Figure 5-6. BIOS Setup Screen Enabling SA T A RAID in the BIOS Before installing the Windows operating system, you must change some settings in the BIOS. Boot up the system and hit the <Delete> key to enter the BIOS Setup Utlility .
Chapter 5: Advanced Motherboard Setup 5-27 Figure 5-8. Adaptec RAID Utility Program Screen Using the DotHill and Adaptec RAID Utility The RAID Utility program allows you to dene the drives you want to include in the RAID array and the mode and type of RAID.
5-28 A+ SERVER 1012G-MTF USER'S MANUAL Installing the RAID Driver During OS Installation Y ou may also use the procedure below to install the RAID driver during the Windows OS installation: 1. With the Windows OS installation CD-ROM in the CD drive, restart the system.
Chapter 5: Advanced Motherboard Setup 5-29 Figure 5-9. Driver/T ool Installation Display Screen Note: Click the icons showing a hand writing on paper to view the readme les for each item. Click the computer icons to the right of these items to install each item (from top to the bottom) one at a time.
5-30 A+ SERVER 1012G-MTF USER'S MANUAL Note: The SuperDoctor III program and User ’s Manual can be downloaded from the Supermicro web site at http://www .supermicro.com/products/accessories/software/ SuperDoctorIII.cfm .For Linux, we recommend that you use the SuperoDoctor II application instead.
Chapter 5: Advanced Motherboard Setup 5-31 5-15 Motherboard Battery Caution : There is a danger of explosion if the onboard battery is installed upside down, which will reverse its polarites (see Figure 5-12). This battery must be replaced only with the same or an equivalent type recommended by the manufacturer (CR2032).
5-32 A+ SERVER 1012G-MTF USER'S MANUAL Notes.
Chapter 6: Advanced Chassis Setup 6-1 Chapter 6 Advanced Chassis Setup This chapter covers the steps required to install components and perform maintenance on the SC813MTS-350CBP chassis. For component installation, follow the steps in the order given to eliminate the most common problems encountered.
6-2 A+ SERVER 1012G-MTF USER'S MANUAL Figure 6-2. Chassis Rear View 6-2 Control Panel The control panel (located on the front of the chassis) must be connected to the JF1 connector on the motherboard to provide you with system control buttons and status indicators.
Chapter 6: Advanced Chassis Setup 6-1 6-3 System Fans Six 4-cm high-performance fans provide the cooling for the A+ Server 1012G-MTF . The chassis includes air seals under the fans and at the chassis cross section, which separates the drive bay area from the motherboard area of the chassis to promote better airow .
6-2 A+ SERVER 1012G-MTF USER'S MANUAL Figure 6-4. Mounting a Drive in a Carrier Accessing the Drive Bays SA T A Drives: Because of their hotswap capability , you do not need to access the inside of the chassis or power down the system to install or replace SA T A drives.
Chapter 6: Advanced Chassis Setup 6-1 Note ! Enterprise level hard disk drives are recommended for use in Supermicro chassis and servers. For information on recommended HDDs, visit the Supermicro Web site at http://www .supermicro.com/products/nfo/les/storage/SAS-CompList.
6-2 A+ SERVER 1012G-MTF USER'S MANUAL DVD-ROM Drive Installation The top cover of the chassis must be opened to gain full access to the DVD-ROM drive bay . The 1012G-MTF accomodates only slim DVD-ROM drives. Side mounting brackets are needed to mount a slim DVD-ROM drive into the 1012G-MTF server .
Chapter 6: Advanced Chassis Setup 6-1 6-5 Power Supply The A+ Server 1012G-MTF has a single 350 W atts power supply . This power supply has the capability of operating at 100 - 240 input volts.
6-2 A+ SERVER 1012G-MTF USER'S MANUAL Notes.
Chapter 7: BIOS 7-1 Chapter 7 BIOS 7-1 Introduction This chapter describes the AMIBIOS™ Setup utility for the H8SGL-F serverboard. The 16 Mb AMI BIOS® is stored in a ash chip and can be easily upgraded using a oppy disk-based program.
7-2 A+ SERVER 1012G-MTF USER'S MANUAL 7-2 Main Menu When you rst enter AMI BIOS Setup Utility , you will see the Main Menu screen. Y ou can always return to the Main Menu by selecting the Main tab on the top of the screen with the arrow keys.
Chapter 7: BIOS 7-3 W ait for F1 if Error This setting controls the system response when an error is detected during the boot sequence. When enabled, BIOS will stop the boot sequence when an error is detected, at which point you will need to press the F1 button to re-enter the BIOS setup menu.
7-4 A+ SERVER 1012G-MTF USER'S MANUAL Processor and Clock Options CPU Conguration This displays static information on the Module V ersion, Physical Count and Logical Count for the system's processor(s) and clock.
Chapter 7: BIOS 7-5 Advanced Chipset Control NorthBridge Conguration Memory Conguration Bank Interleaving Select Auto to automatically enable a bank-interleaving memory scheme when this function is supported by the processor . The options are Auto and Disabled.
7-6 A+ SERVER 1012G-MTF USER'S MANUAL DRAM Timing Conguration DRAM Timing Cong This option allows you to set the DRAM timing conguration for the system. Options include Auto or Manual. Memory Clock Speed This option sets the memory clock speed.
Chapter 7: BIOS 7-7 OnChip SA T A T ype Use this setting to set the OnChip SA T A type. Options include Native IDE, RAID , AHCI and Legacy IDE. RAID Codebase This submenu appears when you choose "RAID" from the "OnChip SA T A T ype" setting above.
7-8 A+ SERVER 1012G-MTF USER'S MANUAL which has a data transfer rate of 8.3 MBs. Select 3 to allow BIOS to use PIO mode 3, which has a data transfer rate of 1 1.1 MBs. Select 4 to allow BIOS to use PIO mode 4, which has a data transfer rate of 16.
Chapter 7: BIOS 7-9 This option sets the latency of all PCI devices on the PCI bus. Select a value to set the PCI latency in PCI clock cycles. Options are 32, 64 , 96, 128, 160, 192, 224 and 248. PCI IDE Busmaster Use this setting to Enable or Disable BIOS enabled uses of PCI Busmastering for reading or writing to IDE drives.
7-10 A+ SERVER 1012G-MTF USER'S MANUAL Serial 2 Address This option species the base I/O port address and Interrupt Request address of serial port 2. Select "Disabled" to prevent the serial port from accessing any system resources. When this option is set to "Disabled", the serial port physically becomes unavailable.
Chapter 7: BIOS 7-1 1 VT -UTF8 Combo Key Support Allows you to Enable or Disable VT -UTF8 combination key support for ANSI/ VT100 terminals. Sredir Memory Display Delay Use this setting to set the delay in seconds to display memory information. Options are No Delay , 1 sec, 2 secs and 4 secs.
7-12 A+ SERVER 1012G-MTF USER'S MANUAL CPU Overheating Alarm (COA) CPU Overheating Alarm (COA) has “ Early Alarm ” and “ Default Alarm ” (default) options in the BIOS, and is required to be implemented in all fan speed control modes.
Chapter 7: BIOS 7-13 ACPI Aware O/S This setting Enables or Disables ACPI support for the system's operating system. Options include Ye s (enabled) or No (disabled). ACPI APIC Support Determines whether to include the ACPI APIC table pointer in the RSDT pointer list.
7-14 A+ SERVER 1012G-MTF USER'S MANUAL Note: Each question in this group may take a considerable amount of time. IP Address Source Select the source of this machine's IP address. If Static is selected, you will need to know and enter manually the IP address of this machine below .
Chapter 7: BIOS 7-15 Event Log Conguration View Event Log Pressing the Enter key will open the event log. Use the " h " and " i " keys to navigate through the system event log. Mark All Events as Read Selecting this and pressing the Enter key marks all events as read in the event log.
7-16 A+ SERVER 1012G-MTF USER'S MANUAL 7-5 Boot Menu The Boot Menu is accessible only when the "Load Onboard LAN Option ROM" setting (in the PCI/PnP Conguration menu) is enabled. Boot Device Priority This feature allows you to prioritize the boot sequence from the list of available devices.
Chapter 7: BIOS 7-17 7-6 Exit Menu Select the Exit tab from AMI BIOS Setup Utility screen to enter the Exit BIOS Setup screen. Save Changes and Exit When you have completed the system conguration changes, select this option to leave BIOS Setup and reboot the computer , so the new system conguration parameters can take effect.
7-18 A+ SERVER 1012G-MTF USER'S MANUAL Notes.
Appendix A: POST Error Beep Codes A-1 Appendix A POST Error Beep Codes During the POST (Power-On Self-T est) routines, which are performed each time the system is powered on, errors may occur . Non-fatal errors are those which, in most cases, allow the system to continue the boot-up process.
A-2 A+ SERVER 1012G-MTF USER'S MANUAL Notes.
B-1 Appendix B: System Specications Appendix B System Specications Processors Single AMD Opteron 6000 series (AMD Socket G34 type) processors Note: Please refer to our web site for a complete listing of supported processors.
B-2 A+ SERVER 1012G-MTF USER'S MANUAL Chassis Model: SC813MTS-350CBP (1U Rackmount) Dimensions: (WxHxD) 17.2 x 1.7 x 19.85 in. (437 x 43 x 504 mm) Note: please visit our web site for information on supported operating systems Weight Gross Weight: 38 lbs.
B-3 Appendix B: System Specications Regulatory Compliance Electromagnetic Emissions: FCC Class A, EN 55022 Class A, EN 61000-3-2/-3- 3, CISPR 22 Class A Electromagnetic Immunity: EN 55024/CISPR 24,.
B-4 A+ SERVER 1012G-MTF USER'S MANUAL (continued from front) The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear faciliti.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté SUPER MICRO Computer 1012G-MTF c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du SUPER MICRO Computer 1012G-MTF - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation SUPER MICRO Computer 1012G-MTF, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le SUPER MICRO Computer 1012G-MTF va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le SUPER MICRO Computer 1012G-MTF, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du SUPER MICRO Computer 1012G-MTF.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le SUPER MICRO Computer 1012G-MTF. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei SUPER MICRO Computer 1012G-MTF ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
