Manuel d'utilisation / d'entretien du produit NETRS2321P du fabricant StarTech.com
Aller à la page of 24
Manual Revision: 07/09/2013 For the most up-to-date information, please visit: www.startech.com DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr .startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.
Instruction Manual FCC C ompliance Statement This equipment has been tested and f ound to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules . These limits are desig ned to provide reasonable protection against harmful interference in a residential installation.
Instruction Manual i T able of C ontents Product Overview .................................................................................. 1 DIN Rail Mounting...........................................................................................
Instruction Manual ii Product Applications ............................................................................. 17 UDP ...........................................................................................................................
Instruction Manual 1 P roduc t Overview T op View Fron t View Rear View DIN rail screw hole Wall-moun t screw hole RS-232 DB9 male serial port DC Jack Load Default/Reset Button RJ45 10/100M Ethernet p.
Instruction Manual 2 DIN Rail Mounting Attach the included DIN Rail brackets (one per side) using the provided screw s to the top DIN Rail screw hole (marked in the above diagram), and clip t o your D.
Instruction Manual 3 Pin 1 TX+ 2 T X- 3 RX+ 6 RX- RJ45 Ethernet Pin Assignmen ts RS-232 DB9 Male Pin Assignment NOTE: This serial device ser ver performs as a DTE device.
Instruction Manual 4 Introduction Packaging C ontents • 1 x Serial over IP Device Server • 1 x Universal P ower Adapter (NA/UK/EU) • 1 x Software CD • 1 x Instruction Manual • 1 x DIN Rail Kit Installation W eb Brow ser Method 1. Plug in the power adapt er and connect the RJ45 inter face to y our LAN.
Instruction Manual 5 Broadcast Search The Broadcast Search function is used to locate all NETRS2321P devices that are connected to the same LAN as your computer .
Instruction Manual 6 W eb Console Opera tion Enter the IP address you ha ve set for the NETRS2321P device into your web bro wser address bar (default IP: 10.
Instruction Manual 7 Sy stem IP On this page, you can adjust the NETRS2321P network conguration. If set to DHCP mode, all other settings will be ignored , and the IP address will be assigned by DHCP server after resetting the device. Press “Update ” to store the data.
Instruction Manual 8 Load default setting On this page, you can load and stor e the fac tory default settings into EEPROM. NOTE: Network settings and M AC address will not be changed. Press “Load” to load default settings. Reset the device t o take eect.
Instruction Manual 9 T CP Mode NOTE: When T CP mode is set to Ser ver or Client mode , the UDP mode will be disabled automatically . When UDP mode is enabled , the T CP mode will be disabled automatically . Once you hav e completed making changes, press "Update" to store the data.
Instruction Manual 10 Reverse T elnet Reverse T elnet works the same as T elnet Ser ver mode . The T elnet por t is listens f or a connection after booting up. If you encounter err ors when using some T elnet clients, such as the Microsoft interpretation of T elnet for W indows XP you can try the connection using Reverse T elnet mode.
Instruction Manual 11 UDP Mode When UDP mode is enabled, TCP mode will be disabled automatically . I n UDP mode , the Local P or t will be assigned to this devic e. Y ou can list the remote connection IP and Port for up to 10 remot e devices. Once you hav e completed making changes, press "Update" to store the data.
Instruction Manual 12 UA R T U AR T or Univ ersal Asynchronous Receiver Transmitt er refers to the ‘RS-232 serial por t’ of the NETRS2321P . All of the por t settings are modied from this page . Once you hav e completed making changes, press "Update" to store the data.
Instruction Manual 13 Hardware F low Control Set the ow control mode of U ART inter face as enabled or as none . U ART M emory Overow count Shows the number of overow bytes in network buer . U ART FIFO O verow count Shows the number of overows counted in the U AR T RX buer .
Instruction Manual 14 Virtual C OM S oftware Opera tion The Virtual Com application lets you install and congure your NETRS2321P easily over the network. Five function groups are pr ovided to ease the installation process, allow COM mapping , and provide monitoring and IP location server functions.
Instruction Manual 15 C OM Mapping T o map a vir tual C OM por t, select COM Mapping fr om the lef t pane of the VCOM application, then click Add Click OK to create the C OM Mapping T CP/UDP Depending on the protocol you ar e using, the options below will enable/disable automatically as applicable.
Instruction Manual 16 Set the device to be a T elnet Client . In the case the Ethernet connected device is the T elnet ser ver or other NETRS2321P in server mode.
Instruction Manual 17 P roduc t A pplications UDP TC P TCP Server Mode.
Instruction Manual 18 Specications Connectors 1x DB-9 (9-pin; D-Sub) Male 1x RJ-45 Female Serial Protocol RS-232 Maximum Baud Rate 230400 Data Bits 5,6,7,8 Flow C ontrol RTS/CTS, None Parity Odd, Ev en, None, Space, Mark Stop Bits 1, 1.
Instruction Manual 19 T echnical Suppor t StarT ech.com’ s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your pr oduc t, visit ww w .star tech.c om/suppor t and access our compr ehensive selection of online tools, documentation, and downloads.
Hard-to-nd made easy . At StarT ech.com, that isn ’t a slogan. It ’ s a promise. StarT ech.com is your one-stop source for every connectivity par t you need. F rom the latest technology to legacy products — and all the parts that bridge the old and new — we can help you nd the parts that connect your solutions.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté StarTech.com NETRS2321P c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du StarTech.com NETRS2321P - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation StarTech.com NETRS2321P, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le StarTech.com NETRS2321P va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le StarTech.com NETRS2321P, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du StarTech.com NETRS2321P.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le StarTech.com NETRS2321P. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei StarTech.com NETRS2321P ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
