Manuel d'utilisation / d'entretien du produit T795C du fabricant Speed Queen
Aller à la page of 31
Installation/Operation Supplement Drying T umblers 50 Pound Capacity 75 Pound Capacity Refer to Pa ge 3 for Model Identif ication TMB795C Part No. M414884R10 Februa ry 2008 K eep These Instructions f or Futur e Reference. (If this machine changes o wnership, this manual must accompan y machine.
.
Installation/Operation Sup plement M414884 (EN) 1 © Published b y permission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation must conf orm with local codes. IMPOR T ANT : Inf ormation must be obtained from a local gas supplier on instructions to be f ollowed if the user smells gas.
© Published b y permission of the copyright o w ner . All rights reserv ed. No part of the cont ents of this book may be reproduced or transmitted in an y form or by any means without the e xpressed written consent of the publisher .
© Published b y permission of the copyri ght owner – DO NO T COPY or TRANSMIT 3 M414884 (EN) Installation/Operation Sup plement Intr oduction Model Identification Information in this manual is applicable to these models. Includes models with control suf fixes: Wiring Diagram The wiring diagr a m is lo cated in the juncti on or contactor box.
© Published b y per mission of the copyright owner – DO NO T COPY or TRANSMIT M414884 (EN) 4 Installation/Opera tion Supplement Safe ty Inf ormation Save These Instructions Impor tant Safety Instructions 1. Read all instructions before using the tumbler .
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 5 M414884 (EN) 22. Install this tumble r according to the INST ALLA TION INSTR UCTIONS . All connections for electrical po we r , grounding, and gas supply must comply with local codes and be made by licensed personnel when required.
© Published b y per mission of the copyright owner – DO NO T COPY or TRANSMIT M414884 (EN) 6 Installation/Opera tion Supplement Installation Specifications and Dimensions Specifications 50 P ound 75 P ound Noise le vel measured during operation at operator position of 1 meter ( 3.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 7 M414884 (EN) Cabinet Dimensions * H, S and U models prior to Serial No 0308001307 and all other models. ** H, S and U models after Serial No.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement M414884 (EN) 8 Horizontal Exhaust Outlet Locations TMB811N TMB811N A B C M o d e l s ABC 050/075 137 mm (5.375 in.) 203 mm (8 in.) 340 mm (13.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 9 M414884 (EN) Gas Connection Locations TMB812N TMB812N A B Models Diameter A B 050 1/2 in. NPT 394 mm (15.5 in.) 1670 mm (65.75 in.) 075 1/2 in.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement M414884 (EN) 10 Electrical Connection Locations NO TE: These figu res ar e approximate dimensions only . TMB813N TMB813N GAS AND STEAM ELECTRIC A B B A Models A B Gas and Steam 241 mm (9.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 11 M414884 (EN) Steam Connect ion Locations TMB814N TMB814N C A B D M o d e l s D i a m e t e r ABCD 050/075 3/4 in. NPT 387 mm (15.25 i n.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement M414884 (EN) 12 P o sition and Level the T umbler Figure 1 NO TE: This manual is only a supplement. Refer to installation/operation ma nual f or full instructions.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 13 M414884 (EN) Fire Suppression System G, H, K, S and U Models Only W ater Requirements IMPOR T ANT : W ater must be supplied to the f ire suppression system, or the f ire suppression system will not operate as intended.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement M414884 (EN) 14 Electrical Requirements No independent external power source or supply connection is necessary . Powe r to operate the 24 V olt fire suppression system is from the rear j unction/ contactor box.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 15 M414884 (EN) General Information This information is to be used when installing gas tumblers in countries, and/or on gases, dif ferent tha n the machine’ s factory configuration.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement M414884 (EN) 16 Burner orifice information at 0-600 meters (0-2000 feet) altitude. N/A = Part no longer a vailable. * For Natural Gas, Group E+ app lications, con vert using L.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 17 M414884 (EN) Exhaust Requirements Make-Up Air IMPOR T ANT : Do not obstruct the flow of combustion and v entilation air .
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement M414884 (EN) 18 Electrical Requirements Grounding Instructions NO TE: T o ensure pr.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 19 M414884 (EN) Steam Requirements Obtain specific steam serv ice pipe sizes from the steam system supplier or a qualified steam fitt er .
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement M414884 (EN) 20 Figure 3 TMB2014N NO TE: Refer to Tab l e 2 for sizing of steam lines. Piping m ust al so be siz ed accordingly for length of runs, and number of elbows.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT 21 M414884 (EN) Installation/Operation Sup plement Operation Emergency Stop Button All OPL tumblers are factor y-equipped with an emergency stop b utton loc ated on the front pane l.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement M414884 (EN) 22 Contr ol Instructions Electr omechanical Coin Control CD , CX and CY Control Suffix es 1. Set the TEMPERA TURE selector at HIGH or LO W , or anywhere between these settings.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 23 M414884 (EN) Manual Timer Control MT and R T Control Suffixes 1. Set the HEA T/DR YING timer for the number of minutes (from 0-60) desired.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement M414884 (EN) 24 Dual Digital Timer Control QT and RQ Control Suffix es 1. Select HIGH, MED, LO W or NO HEA T by turning the temperature knob .
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 25 M414884 (EN) Electr on ic OPL Micr o Control G Models Through Serial No . 0110002231 and H, L, P , S, U and Y Models with OM and RM Control Suffix es 1.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement M414884 (EN) 26 G Models Star ting Se rial No . 0707xxxxx and K Models with OM and RM Control Suffix es 1. T o use an Automatic Cycle, press a TEMPERA TURE pad.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 27 M414884 (EN) Single Dr op Control SD and SX Control Suffix es 1. Select HIGH, MED, LO W or NO HEA T by turning the temperature knob .
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement M414884 (EN) 28 Ignition Contr ol Operation Diagnostic LED (DGN LED) / Err or Codes The Diagnostic LED or DGN LED is located by the po wer connector on the ign ition control.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT 29 M414884 (EN) Installation/Operation Sup plement Disposal of Unit This appliance is marked according to the European directiv e 2002/96/EC on W aste Electrical and Electronic Equipment (WEEE).
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Speed Queen T795C c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Speed Queen T795C - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Speed Queen T795C, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Speed Queen T795C va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Speed Queen T795C, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Speed Queen T795C.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Speed Queen T795C. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Speed Queen T795C ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
