Manuel d'utilisation / d'entretien du produit UWP-X1/X2 du fabricant Sony
Aller à la page of 48
2-347-711- 32 (2) 2003 Sony Corporation Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference.
2.
3 Ta b le of Contents Configuration of the Packages ............................. 4 UWP-C1 ..................................... 4 UWP-C2 ..................................... 5 UWP-S1 ..................................... 6 UWP-S2 ...................
Configuration of the Packages 4 Configuration of the P ac kages This operation manual is for the UWP-C1/C2/S1/S2/X1/X2 wireless microphone packages. The contents of each package are described below. UWP-C1 The UWP-C1 consists of a body-pack transmitter (UTX-B1) and a portable diversity tuner (URX-P1).
5 UWP-C2 The UWP-C2 consists of a hand-held microphone (UTX-H1) and a portable diversity tuner (URX-P1). When used in conjunction with a compact camcorder, the UWP-C2 makes a mobile system for ENG (Electronic News Gathering) or EFP (Electronic Field Production) purposes.
Configuration of the Packages 6 UWP-S1 The UWP-S1 consists of a body-pack transmitter (UTX-B1) and a half-rack size diversity tuner (URX-R1). The UWP-S1 is suitable for constructing a wireless system for AV presentations.
7 UWP-S2 The UWP-S2 consists of a hand-held microphone (UTX-H1) and a half-rack size diversity tuner (URX-R1). The UWP-S2 is suitable for constructing a wireless system for AV presentations. Hand-held microphone (UTX-H1) (1) Half-rack size diversity tuner (URX-R1) (1) Supplied accessories • Microphone holder (1) • AC adapter (1) (See page 47.
Configuration of the Packages 8 UWP-X1 The UWP-X1 consists of a body-pack transmitter (UTX-B1) and a diversity tuner module (URX-M1). By installing the tuner module into a tuner base unit or a powered mixer, the system construction to meet the desired purpose of use and required system scale becomes possible.
9 UWP-X2 The UWP-X2 consists of a hand-held microphone (UTX-H1) and a diversity tuner module (URX-M1) . By installing the tuner module into a tuner base unit or a powered mixer, the system construction to meet the desired purpose of use and required system scale becomes possible.
Features 10 Features Each of the UWP-C1/C2/S1/S2/X1/ X2 wireless microphone packages (referred to as the UWP series hereafter) combines a transmitter (body-pack transmitter (UTX-B1) or hand-held microphone (UTX-H1)) and a receiver (portable diversity tuner (URX-P1), half-rack size diversity tuner (URX-R1), or diversity tuner module (URX-M1)).
11 Half-rack size diversity tuner (URX-R1) This tuner employs a space diversity system with little signal dropout and two angle-adjustable antennas. It comes with two types of audio connectors (1/4-inch jack and XLR type) on the rear panel.
Precautions 12 Precautions • The UWP series product must be used within a temperature range of 0°C to 40°C (32°F to 104°F). • Operating the UWP series product near electrical equipment (motors, transformers, or dimmers) may cause it to be affected by electromagnetic induction.
13 Transmission channel Transmission frequency Attenuation level of the input signal Accumulated battery use time Press the SET button. Pa r ts Identification Body-pack transmitter (UTX-B1) 1 Antenna 2 Audio input connector Connect the supplied lavalier microphone here.
Parts Identification 14 5 + (+ selection) / – (– selection/ reset) buttons Press these buttons to set the transmission channel, frequency, or attenuation level of the input signal. The “–” button resets the accumulated battery use time to “00:00”.
15 D BATT (battery) indication Shows the battery condition. For details, see “Power Supply” on page 20. E CH (channel) indication Shows the transmission channel. Each time you press the SET button, the channel indication changes as follows. For details, see “Settings” on page 28.
Parts Identification 16 4 Display section A RF (radio frequency) indications The number of dots indicates the RF input level. B AF (audio frequency) indication Appears whenever the output audio signal is stronger than the reference level. C BATT (battery) indication Shows the battery condition.
17 Half-rack size diversity tuner (URX-R1) 1 POWER switch Turns the power of the tuner ON or OFF. 2 Antennas a/b The angle of the antennas can be adjusted manually. 3 MONITOR connector (phone jack) To monitor the tuner output, connect the headphones to this connector and adjust the monitor level with the MONITOR control.
Parts Identification 18 7 RF (radio frequency) indicator Indicates the strength of the RF input signal. On in green : RF input is 25 dBµ* or more. Off : RF input is less than 25 dBµ*. 8 SET button Press to change display parameters. For details, see “Settings” on page 28.
19 Reception channel group and number Reception frequency Press the SET button. A RF (radio frequency) indications The number of dots indicates the RF input level. B AF (audio frequency) indication Appears whenever the output audio signal is stronger than the reference level.
Power Supply 20 Po wer Suppl y This section explains the power supply for each component. • Half-rack size diversity tuner (URX-R1) Connect the supplied AC adapter to the DC IN 9V connector on the rear panel, and then connect the AC adapter to a wall outlet.
21 Battery indication When you turn the power on, the battery condition is shown by the BATT indication in the display section. When the indication in column 4 starts to flash, replace the batteries with new ones. Be sure to check the expiration date printed on the new batteries before using them.
Power Supply 22 Note The indicated battery condition may not be correct if the batteries were not new when installed. If you plan to use the component for a long period, it is recommended that you replace the batteries with brand new ones. Notes on batteries Batteries may leak or explode if mistreated.
23 Attachment and Installation Pr ocedures This section describes the procedures for attaching the supplied accessories to components and the installation of the diversity tuner module (URX-M1) into the MB-806A Tuner Base Unit or SRP-X700P Powered Mixer.
Attachment and Installation Procedures 24 Removing the belt clip Insert a pointed object such as a ballpoint pen between the belt clip and the transmitter to make some space between them, and then remove the end of the belt clip from the hole on the side of the transmitter.
25 Attaching the shoe mount adapter Be sure to hold the horizontal part of the belt clip with the horizontal groove on the shoe mount adapter. After attaching the belt clip and the shoe mount adapter,.
Attachment and Installation Procedures 26 • The buttons and display on the front panel of the diversity tuner module (URX-M1) may be damaged if they are gripped too strongly.
27 Installing a diversity tuner module (URX-M1) into an SRP-X700P Powered Mixer The SRP-X700P Powered Mixer can accommodate up to 2 diversity tuner modules (URX-M1). 1 Remove the tuner slot cover from the SRP-X700P and inspect the top and bottom sides of the diversity tuner module.
Settings 28 Settings 4 When the desired channel number (or frequency) appears, set the POWER switch to OFF to complete the setting, or press the SET button to set other items.
29 Setting the reception channel The procedure below is the same for all UWP series tuners (URX-P1/R1/M1). See “Wireless microphone system frequency list” on page 45 for details on the selectable channel groups and channels. 1 Press down the SET button for more than one second.
Settings 30 To selct the channel by frequency indication 1 Press the SET button for more than one second. Keep pressing the SET button until the display seciton parameters start to flash. 2 Press the SET button repeatedly until the frequency indication appears and starts flashing.
31 All the tuner modules installed into the MB-806 are set to the available channels within the selected channel group. After the automatic detection and selection of available channels finish, you can change the group and channel on each tuner module manually.
Settings 32 Resetting the accumulated battery use time indication The procedure below is the same for all UWP series transmitters (UTX-B1/H1) and the portable diversity tuner (URX-P1). The accumulated battery use time is the total time (in hours and minutes) that the batteries have been used.
33 2 Press the SET button repeatedly until the RF output level indication appears in the display section. 3 Press the + button to select H (10 mW), or press the – button to select L (2 mW). 4 Set the POWER switch to OFF to complete the setting, or press the SET button to set other items.
Operation 34 Operation The procedure below is the same for all UWP series components (UTX-B1/H1 and URX-P1/R1/M1). 1 Make all necessary connections on the tuner. For examples of UWP series component connections, see “System Configurations” on page 35.
35 System Configurations The UWP series is used in the following configuration examples. Sample configurations for ENG (Electronic News Gathering) or EFP (Electronic Field Production) with a digital c.
System Configurations 36 Sample configurations for AV presentations or Body-pack transmitter (UTX-B1) Portable diversity tuner (URX-P1) (with the shoe mount adapter attached) Hand-held microphone (UTX-H1) To DVD player, PC, or VTR, etc.
37 Sample configuration of a PA system Hand-held microphone (UTX-H1) AN-820 UHF antenna Diversity tuner module (URX-M1) Body-pack transmitter (UTX-B1) To DVD player, PC, or VTR, etc.
Error Messages 38 Err or Messa ges When a problem occurs, one of the following error messages may appear on the display. Messages Meanings Remedy Err 01 An error has occurred in the backup memory data. Contact your Sony dealer. Err 02 The PLL synthesized circuit is abnormal.
39 Tr oub leshooting If you have any problem using the UWP system, use the following checklist. Should any problem persist, consult your Sony dealer. Symptom Meanings/Remedy * Body-pack transmitter (UTX-B1)/hand-held microphone (UTX-H1)/portable diversity tuner (URX-P1) only.
Troubleshooting 40 Symptom Meanings/Remedy There is distortion in the sound. The attenuation level of the transmitter is too low. b The input level of the tuner is extremely high. Press the – button on the transmitter in attenuation level setting mode to raise the attenuation level.
41 Specifications Transmitters (UTX-B1/ H1) Items common to all transmitters Oscillator type Crystal-controlled PLL synthesizer Carrier frequencies 794 to 806 MHz Operating frequency band 12 MHz RF output level 10 mW/2 mW selectable Pre-emphasis 50 µs Reference deviation ±5 kHz Frequency characteristics 50 Hz to 18 kHz Distortion 1.
Specifications 42 Hand-held microphone ( UTX-H1) Microphone unit Dynamic Directivity Unidirectional Antenna 1/4 λ (wave length) wire (internal) Dimensions φ 52 × 240 mm (2 1 / 8 × 9 1 / 2 inches) (dia/length) Mass Approx.
43 Display Channel, frequency, audio level, RF level, accumulated battery use time, monitor level Power requirements 3.0 V DC (two LR6/AA- size alkaline batteries) Battery life Approx. 6 hours Dimensions 63 × 100 × 30 mm (2 1 / 2 × 4 × 1 3 / 16 inches) (w/h/d) (excluding the antennas) Mass Approx.
Specifications 44 Mass Approx. 1.3 kg (2 lb 14 oz) Diversity tuner module (URX- M1) Squelch level 25 dBµ Display Channel, frequency Dimensions 57 × 26 × 121 mm (2 1 / 4 × 1 1 / 16 × 4 7 / 8 inches) (w/h/d) Mass Approx. 150 g (5 oz) Design and specifications are subject to change without notice.
45 Appendix Wireless microphone system frequency list The following tables show the channels and frequencies selectable on your wireless microphone, transmitter and tuner. The group 00 permits the unit to operate on any of 47 carrier frequencies in 125 kHz steps of TV channels 68 and 69.
Appendix 46 Groups for tuner Group 11 Grouping 11 channels. 68-05 794.625 68-14 795.750 68-25 797.125 68-41 799.125 68-47 799.875 69-12 801.500 69-16 802.000 69-30 803.750 69-37 804.625 69-40 805.000 69-42 805.250 CH MHz Group 12 Grouping 8 channels. Group 13 Grouping 8 channels.
47 AC adapter for use with the URX-R1 Please prepare an AC adapter which satisfies the following conditions for normal operation of the URX-R1 Half-rack Size Diversity Tuner. • Specifications AC input voltage: Differs according to the countries. DC output voltage: 9.
Sony Corporation Printed in Korea.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Sony UWP-X1/X2 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Sony UWP-X1/X2 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Sony UWP-X1/X2, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Sony UWP-X1/X2 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Sony UWP-X1/X2, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Sony UWP-X1/X2.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Sony UWP-X1/X2. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Sony UWP-X1/X2 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
