Manuel d'utilisation / d'entretien du produit AVR515 du fabricant B&K
Aller à la page of 64
B & K Component s, Lt d. A VR515 S ERIES 2 A VR517 S ERIES 2 User Manual Five or Seven Channel Surround A/V Processor Receiver 13927 1 105.
USER MANUAL - A VR515 Series2, A VR517 Series2 © 2005 B & K Components Lt d. All rights reserved. The information in this manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from B & K Components, Lt d.
T ABLE OF CONTENTS 1 ACCESSORIES AND LIMITED W ARRANTY ii T ABLE OF CONTENTS 1 SAFETY PRECAUTIONS 3 UPGRADE FEA TURES 4 AUDIO / VIDEO OVERVIEW 5 AUDIO AND SURROUND FORMA TS 6 QUICK ST AR T CONSIDERA T.
T ABLE OF CONTENTS 2 Plug and Play T iming Setup 37 Zone 2 ‘B’ Second Zone 38 F ACTOR Y RESET 38 SR10.1 REMOTE CONTROL OPERA TION 39 UNIT OPERA TION 40 Master Power On/Off 40 On / S tandby 40 Adju.
SAFETY PRECAUTIONS W ARNING: to prevent fire or shock hazard, do not expose this unit to rain or moisture. Care should be t aken to prevent objects or liquid from entering the enclosure.
UPGRADE FEA TURES Both the A VR515 Series2 and A VR517 Series2 receivers are versatile Audio/Video control centers. Dolby Pro Logic IIx - Movie, Music & Game modes, Expands choice in playback system configuration allowing 5.1, 6.1, or 7.1 playback channels.
AUDIO / VIDEO OVER VIEW Definitions Sources - A source is considered any device that can be connected to the audio/video receiver or processor and transmit a signal that can be seen or heard. T ypical sources include DVD players, satellite boxes, CD players, etc.
Analog vs. Digit al Audio - This refers to the method used to place audio information on the source material and how they are delivered to your receiver from the source. Analog signals exactly represent the sound you will hear through a continuously varying voltage.
Dolby Digit al Surround EX - Dolby® Digital Surround EX™ provides a third surround channel on Dolby Digital movie sound tracks. The third surround channel can be decoded at the cinema's or home viewer's option for playback over surround speakers located behind the seating area.
DTS 5.1 (Digit al Theater Systems) - DTS is a multi-channel digital audio compression format transmitted over optical digital or coaxial digit al connections.
waves is a desirable effect to a point. Dif ferent locations in the room will have waves that collide with one another . This collision can cause a superposition (addition or subtraction) of the audible wavelength. In either case, these locations are referred to as nodes.
1. Head phone Jack - Headphones having a standard ¼” (6.3mm) stereo plug can be connected to the headphone output. 2. Source Selector - T urning the selector clockwise or counterclockwise will cycle through the available inputs. Available input s are V1, V2, TV , DVD, CD, SA T , T APE, FM and AM.
1. AC fuse holder - Holds the AC Line fuse. Replace only with same type and value - 12amp Slow Blow . Note: The volt age rating label is located on the AC fuse holder cover plate. 2. AC input receptacle - For att aching the supplied AC power cord to the receiver .
QUICK ST ART CONSIDERA TIONS Y our B & K receiver is pre-programmed for ease of operation right out of the box. In general, there is minimal setup required to start listening to your new receiver .
SOURCE CONNECTIONS Y our receiver supports several A/V input and output formats. In most cases only one audio and one video connection is needed for each source device. Shown below are the available options: Analog audio (Stereo): lef t and right. Composite video: coaxial (Y ellow RCA).
VIDEO MONIT OR CONNECTION There are many types of video monitors that can be used with your B & K system. Some popular video monitors are televisions, plasma screens, LCD screens and projectors. The B & K A/V receiver has video and audio switching capability .
SURROUND SPEAKER CONNECTIONS Y our B & K receiver has two types of surround outputs: speaker outputs and preamplifier RCA outputs. S peaker outputs connect from the receiver directly to the speakers in the system using a five-way binding post. The RCA outputs are used to connect external amplifiers and/or the subwoofer to the system.
6.1 / 5.1 Speaker Output Connections For use in a 6.1 or 6.0 audio setup, refer to the diagram below . We recommend the 6th speaker be connected to the surround back left channel of the surround receiver . However , either the back left or back right output will operate correctly when the system is configured for use with one back speaker .
RCA Surround Output / Subwoofer Connection Both the A VR515 Series2 and A VR517 Series2 supply 7.1 RCA surround processor outputs. These surround outputs can be used to connect external amplifiers or the subwoofer . The subwoofer for the system will be connected to the SUB OUT .
P ASS THROUGH / RECORD LOOP CONNECTIONS The B & K receiver has a few options for record/pass through output s. There is a Zone A optical digital output, a Zone A coaxial digital output and a Zone B coaxial digital output. The B & K receiver provides three analog audio, composite & S-video outputs.
+12VDC Control Connection If the +12VDC trigger is going to be used, it should be connected as shown right. An external amplifier is being used for this example, however the external device could be any device that employs a control trigger circuit. The plug must be wired as tip (+) and the sleeve (-).
A VR517 Series2 BACK CHANNEL AMPLIFICA TION CONVERSION If both zones of the A VR517 Series2 are being used, you have the option of either using an external amplifier (see page 19 ) or converting the surround back channels to supply the amplification for Zone B.
KEYP AD CONNECTION DESCRIPTION T o connect a CK1.2 Keypad to the A VR515 Series2 or 517 Series2, run a straight through Category 5 (CA T5) cable from the keypad location to the RS-232 jack on the receiver back p anel. T erminate both ends of the CA T5 cable into RJ-45 using the T568B st andard.
SETTING UP THE SYSTEM The setup of the receiver will require navigation through the menu system. T he system menu will display on the front panel as well as an On-Screen Menu format.
23 MAIN MENU SELECTIONS The main menu descriptions are accompanied by the On Screen Menu layout below . In some cases, the front panel will display a slightly abbreviated version of what the On Screen Menu shows due to character space limit ations.
SYSTEM SETUP 1. Setup Speakers This menu configures the receiver for the number of speakers, speaker size, and location of the speakers in the room. It also contains room equalization options that can optimize the sound for a p articular room. The overall sound quality of your system will depend upon how the parameters of this menu are setup.
SETUP SPEAKERS 1. Speaker Size The speaker setup menu defines how many speakers are installed in the system, the relative size of the speakers, and their location in the room. This is the most important setup procedure that will be performed. The receiver comes from the factory setup for 7 small speakers and a subwoofer .
2. Setup Speaker Location Ideally the speakers should be positioned at an equal distance from the listening position. However , physical limitations usually require placing the speaker in other than optimum locations. The surround processor contains a means to electronically move each speaker ’s location.
LFE (0.1) channel level - Usually this will be set to 0.0 dB (default). However , if there is no subwoofer you may wish to reduce the Low Frequency Effect s (LFE) channel to lessen its contribution to the bass going to the remaining large speakers.
The situation is different for large low-frequency peaks. These peaks are what tend to shake the knick-knacks off the shelves and result in an overall tubby sound to the bass. Fortunately , this CAN be remedied electroni- cally…and without drastically altering the characteristic sound of your speakers.
SETUP INPUTS This menu allows you to tell your receiver how you would like each input to operate. Y ou may repeat the following steps for each input by changing input s on the top line of the menu or with the supplied remote control. 1. Default Audio Modes - There are two major categories of audio, 2-channel and 5.
30 6. Input name - Five characters maximum. From the factory , the receiver will display source names that match those printed on the back of the receiver and on the supplied SR10.1 remote. These names can be changed to match the type of source that is being used.
SETUP DISPLA YS Front Panel - Describes the possible selections for the brightness of the front panel display . Bright, medium, dim. OSD Color - Set the preferred color for the OSD menu. Default setting is blue. Select from Blue, Purple, Pink, Aqua, Lilac, Y ellow , Red, or Green.
32 UNIT INFORMA TION Unit information provides hardware information about your receiver . Unit - The model of the receiver sof tware - The software version currently running in the hardware. S/N - Serial Number BKC-DIP - B & K Components Device Interface Protocol version.
Descriptions of each option of the advanced system setup menu are as follows: Zone ‘1’ Home Theater - Allows adjustments for the main home theater zone. Set the max volume, zone ID, Record loop and surround mode options. Power On Titles - Customize power on titles for customized personal greetings.
Power on T itles Personal power on greeting can be programmed to display on your B&K’s front p anel display . Both power on lines contain 16 alphanumeric characters. Power on titles will appear when the receiver is taken out of S tandby . Have fun with your power on titles, and try to WOW everyone.
35 DSP Usage This screen monitors the amount of processing power being used. Expressed in MIPS (Millions Instructions per Second) Security Options In the security menu, the user can protect the receiver from accidental changes to unit settings or reprogramming.
RS-232 Control Port The RS-232 port refers to the main RJ-45 connection located on the receiver's back panel. The RJ-45 contains connections for transmission and reception of RS-232 data. See pin-out at right. The RJ-45 also supports power supply and IR input for CK1.
Plug and Play T iming Setup Plug and play timing pertains to the internal delays associated with the Plug n Play audio detection system. DO NOT ADJUST THESE P ARAMETERS UNLESS THERE IS A PROBLEM HEARING AUDIO Y our receiver has default audio Plug n Play settings that work with the majority of A/V sources and digital audio bitsreams.
Zone 2 ‘B’ Second Zone Level Control - V ariable or fixed. The second zone can be configured for a fixed volume level if external volume control is desired. Max Level - Set the maximum volume for the second zone. This can be used to protect your speakers or ears from inadvertent excessive volume.
SR10.1 REMOTE CONTROL OPERA TION Y our B & K receiver is supplied with a state-of-the-art remote control. The SR10.1 is a computer programmable and learning remote. It can be programmed to control any or all of the compo- nents in your system using IR.
UNIT OPERA TION The following pages outline the normal day-to-day operation of your receiver from the supplied SR10.1 remote control. All unit functions can also be directly controlled from the front panel. The SR10.1 remote is capable of controlling both the B & K receiver plus other source gear in your system.
41 Z1 Operation - Theater The Z1 Operation menu is provided to aide in the Theater zone opera- tion. It does not have to be used in order to control the Theater zone. T o access this menu, press the Menu button on the remote or front panel, scroll down and select choice three; Z1 Operation - Theater .
T uner Operation All TUNER operations require the receiver source be set to TUNER. Press the FM or AM button to access the tuner . Manual T uning - From the remote control or the front panel, t ap the UP or DOWN arrow to tune one frequency step at a time.
FRONT P ANEL DISPLA Y OPERA TION The front panel display is cap able of displaying 16 characters. The first five characters identify the current source input. The remaining 10 characters identify the the audio mode and the number of active speakers. All changes to volume, input, audio mode, etc.
The following tables represent a visual synop sis of how the front will respond depending on the audio mode, number of speakers and the audio signal type. The first t able shows how the front panel will display multi- channel digital bit streams. The second table shows how the front p anel will display two channel audio types.
AUDIO MODES & SPEAKER SELECTIONS B & K incorporates a state-of-the-art sof tware and hardware system that will prioritize the incoming audio signals (Plug n Play) and accordingly select the ap.
Material correctly mixed for Dolby Pro Logic contains no bass information in the surround channels and there- fore, Dolby requires that no surround bass is mixed to the subwoofer when you have small surrounds. However , many video game systems do end up with bass information in the surrounds.
Speaker Selections The table below shows how your receiver will route audio information to the speaker channels depending on audio modes and speaker selection combinations. Audio information will not be lost in any speaker selection. The information for the missing speakers is mixed to other active speakers.
Equalization Settings and Adjustment s The receiver provides 3 ways to modify the frequency response (equalization) for particular listening situa- tions. These equalization are in addition to the room equalization and room resonance adjustment s made in the speaker setup menu.
49 PRESETS Saving a user preset is like taking a virtual picture of ALL USER settings in the receiver . This preset may then be recalled at any time. Up to 40 presets may be saved in either the main theater zone or the second zone. Presets provide a powerful method to recall favorite settings.
Step 3 Select the preset number . If you wish to save the preset to a particular number , you can directly select the preset number from the number pad on the remote control. Use the +10 button to choose preset s above the number 10. For example: 12 is selected as +10 button then the number 2 button (+10, 2).
Recalling a Preset T o recall a preset from the SR10.1 remote control, press the preset number , then the ENTER button. For example, to recall preset number 2, press 2 - ENTER. Three step s are necessary in the case of a preset above the number 10, (preset 12 = +10 - 2 - ENTER).
52 Blank - A button with no flag will not do anything when pressed. It is empty and has no programming. IR Command - A red dot indicates that the button is programmed with an IR database command. An IR database command can be pressed or pressed and held for a scrollable command (such as volume).
53 Macro - An ‘M’ or ‘F’ flag indicates that the button is programmed with a Macro (the F flag indicates the Macro is on one of the Favorites pages). Only the LCD buttons and the Power ON and Power OFF buttons can be programmed with MACROS. Hard buttons cannot be programmed with MACROS directly .
BKcSuite SETUP SOFTW ARE BKcSuite setup software can be downloaded from the B & K website at www .bkcomp.com. Instructions for installation are provided online. Once the sof tware has been installed, download and install the appropriate user manuals sep arately .
6. Once you have configured the settings for your system, save the BKcSuite file . Goto File->Save settings T o File . Both the system settings and presets for zone A and zone B will be saved together in one file (.bkd extension). Once the settings have been saved to file, you are ready to establish a live connection to the preamplifier .
THIS P AGE INTENTIONALL Y LEFT BLANK 56.
THIS P AGE INTENTIONALL Y LEFT BLANK 57.
TROUBLESHOOTING 58 PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION No sound Display will not illuminate. 1. Power cord not plugged in. 2. Power off at AC source. 3. AC power inlet fuse blown or faulty . 4. Power switch in off position (out). 1. Reconnect power cord.
59 Audio/Video Systems Hand-Made in the U.S.A. FRONT SURRND SUB CENTER + EXP ANSION SERIAL # AC LINE IN 1 IN 2 IN 3 V1 V2 TV DVD CD SAT TAPE TAP E V1 ZB/V2 DVD INPUT A/V SOURCE OUTPUTS A/V SOURCE INPUTS COMPONENT VIDEO www .
ON SCREEN MENU TREE 60 A VR 515 or 517 Series 2 Menu System.
ON SCREEN MENU TREE 61 SETUP CROSSOVERS + LFE 1 Crossover 80.0 Hz 2 High Pass +12.0 dB 3 Low Pass +24.0 dB 4 LFE Level -20.0 dB 5 Subwoofer Phase Invert SETUP SPEAKER LEVELS dB Left Center Right Left Center Right Front 0.0 0.0 0.0 Surround 0.0 0.0 Back 0.
SPECIFCIA TIONS 62 A VR515 Series 2 & A VR 517 Series 2 Receivers Specification A VR 515 Series2 A VR 517 Series2 S peaker Outputs 5 7 Surround Sound Processing Dolby Digital / Dolby Pro Logic IIx.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté B&K AVR515 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du B&K AVR515 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation B&K AVR515, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le B&K AVR515 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le B&K AVR515, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du B&K AVR515.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le B&K AVR515. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei B&K AVR515 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
