Manuel d'utilisation / d'entretien du produit AVR212 du fabricant B&K
Aller à la page of 88
P/N13469 0303 B&K SB ! IMPL Y ETTER B&K Components, Ltd. AVR212 A/V Receiver Owner’s Manual.
ii USER INFORMATION SET UP C R O SSO VER S + L F E 1 Cro sso v er 2 High Pass 3 Lo w Pass 4 LFE Lev el SETU P SPEA KER L EVEL S Left Cent er Right Front Sur r ound Back Subwoofer SETU P SPEA KER SIZ E.
iii TABLE OF CONTENTS User Info rmation ............................................................................................................... ........................................ii Table of Contents ......................................
iv Zone ‘Z’ ....................................................................................................................... ......................................................... 55 Presets ..............................................
1 ACKNOWLEDGMENTS Motorola ® , , “ * DigitalDNA™, “Powered by Motorola”™, Moto rola name and l ogo are registered trademarks of Motorola, Inc. Surround EX is a trademark of Dolby Laboratories. Used u nder authori zation. Manufactured under licen se from Dolby Laborato ries.
2 SAFETY PRECAUTIONS PLEASE READ BEFORE INSTALLING WARNING: to prevent fire or sh ock hazard, do not expose this unit to rain or moisture. Car e should be taken to prev ent objects or liquid from entering th e enclos ure. Never handle the p ower cord with wet hands.
3 FEATURES Your new receiver is a versatile audio/ video co ntrol center. The re ceiver is designed to sound sensational and be an attractive, easy-to-use addition to y our audio/vid eo system. Although yo u already have a good ide a of your receiver’s features, we would like to take a moment to point out ce rtain highlights.
4 THE BASICS The following is intended to familiarize users with common term s and applications of Home Theater equipment. Sources - your receiver can p rovide audio from its built-in AM/FM tuner. It can also provide limited video from its on-screen menu system.
5 Stereo - Stereo contains two di screte, front left and right full range au dio channels. Thi s is the most common format for music and i s also used on many movies.
6 DTS NEO:6 – DTS Neo:6 is an advances m atrix decoder. It will take any two-channel source and expand it into five or six channels, depending on the user’s speaker lay out. Two-channel sources inclu de VHS tapes, broadcast television, stereo CDs and DVDs.
7 THX Surround EX ™ - Dolby Digital Surround EX is a joint development of Dolby Laboratories and the THX division of Lucasfilm Ltd. In a movie theater, film soundtra cks that have been encode d with Dolby Digital Surroun d EX technology are a ble to reproduce an extra channel, which has been ad ded during the mixing of the p rogram.
8 Bass Management - Dolby Digital and DTS-ES formats m ay contain up to 6 ful l range chann els plus LFE. Only a system with six full-range (large) s peakers plus a subwo ofer can directly reprodu ce these formats.
9 FRONT PANEL SLEEP HEADPHONE PRESET ENTER MENU SOURCE MODE SAVE POWER ON/OFF POWER ON/OFF AVR 212 A/V RECEIVER D S U I R G R I O T U A N L D 1 Series 200 DOWN UP t ¿ B&K Components, Ltd.
10 REAR PANEL The receiver’s back panel is organized i nto groups of inputs and o utputs for audi o and video as sho wn below. See back of this manual for an enlarged vie w.
11 11. Control outs - Outputs that allow you to remotely control external devices. (See “Makin g The Connection“). 12. Optical and Coax Digital outputs - Zone 1 (A) optical and 1/8” mini-p lug coax output to carry digital information from the selected digital input of the recei v er out to digital recorders, personal com puters, etc.
12 MAKING THE CONNECTION It’s tempting to just plug in your new A/V receiver an d have gre at sound pour out. Before you do that, take a few minutes to plan out how you wa nt the receiver to fit in to your audio/video system. Ask yourself the foll owing questions: y What source components do I want to c onnect to my receiver ? (CD, VCR, etc.
13 AUDIO / VIDEO CONNECTIONS Connecting your analog sources to y our receiver Audio / Video source - conne cting a DVD/VLD play er to the receiver’s analo g inputs. Use the same instructions for connecting to other audio / video sources such as a satellite receiver, cable box, etc.
14 DVD Audio 5.1 input - (Optional contact B&K customer ser vice for details) The AVR 212 allows its COAX DIGITAL RCA connections to be re-configured for u se as a 5.1 audio i nput. Once the unit is re-configured for us e with a 5.1 audio input, the coax digital inputs are no longer available.
15 DIGITAL CONNECTIONS Connect digital inputs (DVD, VLD, etc.) to the re ceiver. You will need either coax ial or optical digital inputs to play Dolby Digital (AC-3) or DTS surround sou nd processing. Digital connection s are also re commended for P CM sources.
16 SURROUND OUTPUTS Your receiver has multiple surround processor outputs for use with external amplifier(s) or po wered speakers. The AVR 315 receiver allows THX Surround EX compatibil it y via two Surround Back ‘S BACK’ processor outputs.
17 SPEAKER OUTPUTS C FRONT LEFT L SURROUND LEFT SURROUND RIGHT FRONT RIGHT CENTER PLUS MINUS PLUS MINUS PLUS MINUS FRONT LEFT FRONT RIGHT (-) (+) R CENTER (-) (+) (-) (+) SURROUND LEFT (-) (+) Sl SURR.
18 ANTENNA CONNECTIONS The FM jack is a stan dard screw on F-type connector. The AM is a push type. Strip ¼ inch of insulation off your AM antenna wires and insert one wire end into each hole whil e holding the tabs down. Release the tabs to lock in the AM antenna wires.
19 FREQUENTLY AS KED QUESTIONS My collection of equipment differs fr om the labels on the back of my recei ver, how can I hook them up? Your receiver provides 5 identical sets of inputs - V1, V2, DVD, CD, and SAT. Each of these has analo g audio, composite video, S-video, coaxial digital audio, and optical digital a udio.
20 My laser disc player (or other digital source) has only op tical output, but my CD recorder (or other digital recorder) has only coaxial input. Do I need some sort o f converter to make direct digital recordings? No, your receiver will conv ert optical to coaxial and coaxial to opti c al.
21 SETUP For best results, perform t he following set up procedure when you initially install your recei ver and anytime you change or add sources, sp eakers, etc. or when you rearrange your listening area THE MENU SYSTEM Setup of your receiver will require you to navigate through the me nu system .
22 SYSTEM SETUP You should always perform System Setup after first inst alling you r receiver and after adding/changin g speakers or sources or rearranging your listening area.
23 Set the size for your front left and righ t, ‘L’ and ’R’ speakers - You must have front speakers. From Remote From Front Panel Action 1 À (PAUSE) or § (STOP) (UP) or (DOWN) move to Speake.
24 Set the size for your surround left an d right, ‘Sl’ and ‘Sr’ speakers - From Remote From Front Panel Action 1 À (PAUSE) or § (STOP) (UP) or (DOWN) move to Surround 2 ¶ (REW) or • (FF).
25 Surround Back setting Subwoofer Ultra Subwoofer Yes THX Subwoofer None Front Large Subwoofer None Front Small None Surround Bass to SW Surround Hi-Pass to Front Surround Bass to SW Surround Hi-Pass.
26 Subwoofer Setting Front Large Center Large Surround Large Surround Back Large None LFE + Bass to Front LFE + Bass to Center LFE + Bass to Surround LFE + Bass to Surround Back Yes THX LFE + Bass to .
27 Speaker Location Ideally your speakers will be the same dista nce away from your listening area. However, physical limitations usually require placing the spe aker in other than optim um locations. Your receiver co ntains a means to electronically move each speaker’s lo cation.
28 Speaker Levels Speaker level calibration al lows you to equalize the volume levels of each speaker to make up for differe nces in speaker characteristics and distan ces from the li stener to the speak ers.
29 From Remote From Front Panel Action 1 À (PAUSE) or § (STOP) (UP) or (DOWN) move to Crossovers + LFE 2 SEL or ENTER (ENTER) activate SETUP CROSSOVERS + LFE 3 À (PAUSE) or § (STOP) (UP) or (DOWN).
30 Set the low pass filters slope - From Remote From Front Panel Action 1 À (PAUSE) or § (STOP) (UP) or (DOWN) move to Low Pass 2 ¶ (REW) or • (FF) VOLUME KNOB adjust filter slope to desired value Set your LFE (.1) channel lev el - Usually this will be set to 0.
31 Room Equalization Usually these settings may be left set to the factory defaults . However, theses settings allow for the correction of various tonal errors that occur during re production of audio in a ho me theater. The room equalization menu allows for two types of adjustments.
32 From Remote From Front Panel Action 1 À (PAUSE) or § (STOP) (UP) or (DOWN) move to Test Tone frequency 2 ¶ (REW) or • (FF) VOLUME KNOB set to desired frequency 3 À (PAUSE) or § (STOP) (UP) o.
33 Setup variable ‘EQ 1’ - allows you to se t default bass and treble settings for u se with all input sources in all audio modes excluding DV D Audio.
34 Display This menu allows you to set various aspec ts of your vi deo and front pan el displays. Make sure you are in the SETUP MENUS and your remote is in B&K mode.
35 Set the intensity of on-screen v ideo overlays - Overlays will appe ar when you chang e a receiver setting or your receiver detects a change in the i ncoming audio or vi de o information. Transp arent mode allows video to be seen behind the overlay.
36 From Remote From Front Panel Action 1 À (PAUSE) or § (STOP) (UP) or (DOWN) move to Zone 1 Video Monitor 2 ¶ (REW) or • (FF) VOLUME KNOB adjust for desired operation Set the Zone 1 Monitor Aspect Ratio - During normal oper ation, your receiv er will overlay status information on your video monitor.
37 Inputs Usually these settings may be left set to the factory de faults. However, your re ceiver allo ws ‘fin e tuning’ of how its surround processor operates after the selection of an i nput source. Make sure you are in the SETUP MENUS and your remote is in B&K mode.
38 Favorite audio listening mode continued Setting a favorite listening mode here will not preve nt t he system from automatically adjusting the listeni ng mode in response to bitstream in formation, nor will it prevent the user from changing mode s during normal ope ration.
39 From Remote From Front Panel Action 4 À (PAUSE) or § (STOP) (UP) or (DOWN) move to Favorite Speakers 5 ¶ (REW) or • (FF) VOLUME KNOB select favorite speakers for us e with source Set the 2-cha.
40 From Remote From Front Panel Action 4 À (PAUSE) or § (STOP) (UP) or (DOWN) move to Multi-chan type 5 ¶ (REW) or • (FF) VOLUME KNOB select type for use with source Set input source level - Allows you to match the levels of you r input sources so that the re are no large cha nges in volume as you change from one source to another .
41 Set component video - (Not applicable to the AVR 2 12 upgrade) Allows you to as sociate one of two component video inputs with ea ch of your input sour ces. Wh en you choose that source for viewi ng, the associated component video input will be routed to the component video output.
42 Presets Usually these settings may be left set to the factory d efaults . However, your receiver allows ‘fine tuning’ of how presets operate. Make sure you are in the SETUP MENUS and your remote is in B&K mode.
43 Generating a name when saving a preset - Whe n you save a preset, your system a utomatically generates a simple name for the pre set, which you can then chang e before confirming the preset sa ve.
44 MEMORY BACKUP Your receiver continually saves any se ttings you have made even if power is lost. However, you may wish to save a backup of your settings in case of inadvertent chang es to them. To perfo rm a backup, follow the procedure below. To restore backup settings perform the same proced ure bu t select restore in st ead of backup.
45 OPERATION The following outlines the normal d ay-to-day operation of your receiver from the supplied universal remote or directly from your receiver’s front panel. The universal remote is also capable of controlling other equipm ent and storing sequences of commonly used commands.
46 CHOOSING A SOURCE In general, the selected source will ap pear at the Zone 1 output, the TAPE ou tput, and the V1 output. To prevent feedback, TAPE input will not appear at TAPE output and V1 input will not appear at V1 output.
47 ADJUSTING THE VOLUME From Remote From Front Panel Action VOLUME ∧ or VOLUME ∨ VOLUME KNOB adjust volume MUTE can’t do from front panel instant volume all the way down press MUTE again to resto re Note: The front panel VOLUME KNOB is used to control mult iple functions and, theref ore, cannot always control the volume.
48 AUDIO MODES Your receiver is de signed to wo rk with 5 audio listen ing modes. Under normal operation you may simply select Mono, Stereo, Surround, THX or DVD Audio via the remo te control. In addition, you may choose a n audio listening mode immediately followed by a spe aker selectio n.
49 Audio Mode description MONO Sums the incoming audio information to a single channel a nd rout es it to the desired speaker. Use thi s mode for listening to the FM tuner with weak RF signal stre ngths. It is also useful in the ca se of a large listening group and it is difficult to put everyone near the optimum listening position.
50 Neo:6 Movie (Cinema) When listening to movies u sing the DTS Neo:6 m ovie de coder with stereo TV shows o r other surround-en coded programs, there is furthe r enhancement to soundfi eld direct ionality, which is clo se to the quality of discrete 6.
51 Special Considerations For use with multi-channel encoded bitstreams p ressing of SURROUND or THX toggles between th e Movie and Music playback options.
52 Why do I need all these audio modes? With the wide variety of audio source material ava ilable today, i.e. single channel mono, 2 channel mono, 2 channel stereo, 2 chann el surround and multi-channel encode d audio, we believe that the reproduction of this material is best handled in audio categories.
53 EQUALIZATION ‘EQ’ Selecting an EQ functio n via the remote control - all ows you to override how th e audio is cu rrently being processed. This is where you may se t the Dynamic Range to eit her Normal (default) or Limited for late night listening while processi ng Dolby Digital or DTS bit streams.
54 Select Dynamic Range Limited For late night listening while proce ssing Dolby Digital or DTS bit streams and a redu ced dyna mic range is desi red. When the dynamic range is set to limited, compre .
55 ZONE ‘Z’ Use the Z (z one) function v ia the remote control - F or use in a second audio zone, your receive r comes equipped with a fully independent 2-ch annel analog pre-amp.
56 Saving a Preset From Remote From Front Panel Action 1 make all settings you wish to save make all settings you wish to save prepare for saving preset 2 SAVE not available activate preset save enter.
57 Recall preset using Zone 1 Operation From Remote From Front Panel Action 1 MENU MENU return to main menu 2 À (PAUSE) or § (STOP) (UP) or (DOWN) move to Zone 1 Operation 3 SEL or ENTER (ENTER) act.
58 From Remote From Front Panel Action 1 À (PAUSE) or § (STOP) (UP) or (DOWN) move to Zone 2 Operation 2 SEL or ENTER (ENTER) activate ZONE 2 OPERATION 3 source then B&K VOLUME ∧ or VOLUME ∨.
59 ZONE 1 FAVORITE PRESETS Favorite presets need only be setup after adding/ch anging pr esets or sou rces. This feature allows for skippi ng selected presets wh en pressing the remote CHA NNEL ∧ ∨ buttons or front panel PRES ET button. When you save a preset it will be automat ically added to the favorite preset list.
60 ZONE 2 FAVORITE PRESETS Favorite presets need only be setup after adding/ch anging pr esets or sou rces. This feature allows for skippi ng selected presets when p ressing the remote CHA NNEL ∧ ∨ butt ons or front panel pr eset (+) button. When you save a preset it will be automat ically added to the favorite preset list.
61 GETTING RECEIVER STATUS When you are not in a menu, pressing ENTER at any time will bring up a two or three line status message on Zone 1 video outputs.
62 ADVANCED FEATURES WARNING - The following describes the advanced features of the receive r. Since changing some of these functio ns may cau se severe eff ects su ch as no sou nd or no remote control operation, we suggest you leave this menu disabled (hidde n) for normal operati on.
63 Set the maximum level of Zone 1 (A) - Max level allows you to set a maximum volume level for Zone 1 (A). This is very useful if you are using speake rs that can’t handle the maxi mum power output from y our receiver or if you simply wish to limit the volume that can be achi eved using normal front panel or remote operation.
64 From Remote From Front Panel Action 1 À (PAUSE) or § (STOP) (UP) or (DOWN) move to On Screen Display 2 ¶ (REW) or • (FF) VOLUME KNOB set to All, User or Off Set V1 line output usage - V1 output is normally set up as a tape l oop. The V1 and Zone 1 (A) outputs ar e the current source (V2, TV, CD, DVD, etc.
65 Set surround mode operation - Most users will prefer the facto ry setti ng - AUTO. In this mode the receiver automatically sets the surround mode to full 7.1 channel operation (or as many as pe rmitted by your speaker setup) whenever a Dolby Digital or DTS bitstream is detected regardless of what surround mode you have selected .
66 Zone 2 (B) Level Contr ol - You may wish to install an in -wall volume control in yo ur second zon e. This can cause confusion between y our receiver’s internal Zone 2 (B) volume controls an d your in-wall controls.
67 Set the Zone ID for Zone B - Each me ssage transmitted from your remo te includes a Product ID Code Set (See Zone ID), which allows in dependent co mmand and control of the receiver’s Zon es A and B. Set the desired zone ID number for use with Zo ne B (default 2).
68 Link Zone 2 (B) input to Zone 1 (A) input sele ction - Zon e 2 (B) input source sele ction may be linked with Zone 1 (A) source selection s. In operation, whenever a source selection is dete cted (remote, front panel or RS-232) on Zone 1 (A), source lin kage will cause the sou rce to be selected on both zones.
69 Power On Titles When you turn your receiver on it displays two line s of text. You can change this text to a person alized message. Make sure you are in the ADVANCED SYSTEM SETUP menu and the remote is in B&K mode.
70 Setup Control Out 1 Control out 1 is dedicated to Zone 1 (A) it can be p rogrammed to be on or off for each source. For example yo u may wish to use the control out to pull down a projection screen for your V1 and DVD source s but roll it up for Tuner and CD.
71 Setup Control Out 3 CONTROL OUT SETUP 1 Control Out 1 2 Control Out 2 3 Control Out 3 4 Control Out 4 next item SEL select MENU advanced setup 3 Control Out 3 CONTROL OUT 3 CONTROL OUT 3 SETUP 1 TU.
72 Security Options Advanced Security options allow you to hide the ADVANCED SY STEM SETUP menu to prevent inadvertent changes to advanced system settings. This men u also allows yo u to lock your pre set and system setup settings to prevent inadvertent reprogramming.
73 From Remote From Front Panel Action 1 À (PAUSE) or § (STOP) (UP) or (DOWN) mo ve to Front Locked 2 ¶ (REW) or • (FF) VOLUME KNOB No - allow front panel operation Yes - DO NOT ALLOW FRONT PANEL OPERATION IR Locked - Locking the IR remote control will only allow operation of your receiver from the front panel or RS- 232 computer interface.
74 DSP Usage Allows displaying the current DSP usag e in MIPS. From Remote From Front Panel Action 1 À (PAUSE) or § (STOP) (UP) or (DOWN) mo ve to DSP Usage 2 SEL or ENTER (ENTER) activate DSP USAGE.
75 RS-232 baud rate - From Remote From Front Panel Action 1 À (PAUSE) or § (STOP) (UP) or (DOWN) move to Baud Rate 2 ¶ (REW) or • (FF) VOLUME KNOB select de sired baud rate RS-232 echo - From Rem.
76 RS-232 receive ID - From Remote From Front Panel Action 1 À (PAUSE) or § (STOP) (UP) or (DOWN) mo ve to Receive ID 2 ¶ (REW) or • (FF) VOLUME KNOB select desired receive ID RS-232 transmit ID .
77 TROUBLESHOOTING PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION No sound, display will not light 1. Power cord not plugged in. 2. Power off at AC source. 3. Power switch off. 4. AC power inlet fuse blown or faulty. * 1. Reconnect power cord. 2. Check power at plug.
78 RECEIVER SPECIFICATIONS Audio Specifications Video Specifications Frequency Response: 5 Hz - 20 kHz, + 0/ − 0.5dB Frequen cy Response: 20 Hz - 10 MHz ± 3dB Input Sensitivity: 2 V in, 1.
79 LIMITED WARRANTY B & K Components Ltd., referred to herein as B & K, wa rrants your B & K equipment against all defects in material and workmanship for a period of five years from the date of purchase. This warranty applies only to the original purchaser and only to equip ment in normal re sidential use and service.
80 NOTES.
81 REAR PANEL ENLARGED VIEW V1 TUNER FM antenna DVD/VLD TAPE Z2/V2 V2 CD TAPE Z2 TV - V3 SAT V1 Z1 FRONT R LB A C K RS U R R CENTER V1 V2 TV - V3 RS-232 IR IN Z1 Z2 4 SURROUND OUTPUTS 3 CONTROL OUTPUTS DIGITAL OUTPUTS OPTICAL 3.
82 THE OSD MENU SYSTEM A SETU P SPEA KERS 1 Speaker Size 2 Speaker Lo catio n 3 Speaker Levels 4 Crossovers + LFE 5 Room Equalization next it em SEL select MENU sy stem setup SETU P DI SPLA YS 1 Front.
83 THE OSD MENU SYSTEM B SETU P CR OSSO VERS + LFE 1 Crossover 80.0 Hz THX 2 High Pass +12.0 dB T HX 3 Low Pass +24.0 dB THX 4 LFE Level -20.0 dB next it em adj ust MENU speaker setu p SETU P SPEA KER LEVEL S Left Cent er Right Front +12.0 -11.5 +9.5 Surr ound +12.
84 WWW.BKCOMP.COM B&K Components, Ltd. 2100 Old Union Road Buffalo, New York 14227 Phone: 716 – 656 - 0026.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté B&K AVR212 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du B&K AVR212 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation B&K AVR212, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le B&K AVR212 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le B&K AVR212, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du B&K AVR212.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le B&K AVR212. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei B&K AVR212 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
