Manuel d'utilisation / d'entretien du produit CFD-CD777L du fabricant Sony
Aller à la page of 32
3-864-133- 61 (1) 1998 by Sony Corporation CD Radio Cassette-Cor der Operating Instructions CFD-CD777S CFD-CD777L.
Introduction 2 Warning To prevent fire or shock hazard, do not expose the player to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Warning Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
Basic Operations 3 Introduction T able of contents Basic Operations 4 Playing a CD 6 Listening to the radio 8 Playing a tape 10 Recording on a tape 12 Dubbing The CD Player 14 Using the display 15 Loc.
Basic Operations 4 Playing a CD Basic Operations For hookup instructions, see pages 20 – 22. 1 Set FUNCTION to CD. 2 Press 6 PUSH OPEN/CLOSE down to open the lid of the CD compartment and place a CD on the CD compartment. 3 Close the lid of the CD compartment.
Basic Operations Basic Operations 5 Display 4 Press ^ ( ( on the remote). The player plays all the tracks once. Playing time Track number Use these buttons for additional operations To Do this adjust the volume Turn VOLUME. stop playback Press p . pause playback Press ^ .
Basic Operations 6 Listening to the radio For hookup instructions, see pages 20 – 22. 1 Set FUNCTION to RADIO. 2 Set BAND to select the band you want.
Basic Operations Basic Operations 7 Use these buttons for additional operations Tips • During operation, the level meter shows the frequency level of the sound. Adjusting the volume will not affect the level meter. • If the FM broadcast is noisy, set ISS•FM MODE at the rear to “MONO”.
Basic Operations 8 Playing a tape For hookup instructions, see pages 20 – 22. 1 Set FUNCTION to TAPE•CD/ RADIO OFF. 2 Press p6 to open tape compartment and insert a recorded tape. Use TYPE I (normal) tape only. Close the compartment. 3 Press PLAY ( .
Basic Operations Basic Operations 9 Use these buttons for additional operations To Do this adjust the volume Turn VOLUME. stop playback Press p6 . fast-forward or rewind Press ) or 0 . the tape pause playback Press P . Press the button again to resume play after pause.
Basic Operations 10 Recor ding on a tape Display For hookup instructions, see pages 20 – 22. 1 Press p6 to open the tape compartment on deck B and insert a blank tape. 2 Select the program source you want to record. To record from the CD player, set FUNCTION to CD and insert a CD (see page 4).
Basic Operations Basic Operations 11 Notes • During recording, do not press ) , 0 or PLAY on deck A as this causes excessive wow and flutter. • While recording from the built-in microphone (MIC), no sound comes from the speakers or the headphones.
Basic Operations 12 Dubbing For hookup instructions, see pages 20 – 22. 1 Insert a recorded tape into deck A and a blank tape into deck B. 2 Set FUNCTION to DUBBING. 3 To dub at high speed, press HIGH SPEED DUBBING to ON. To dub at normal speed, press HIGH SPEED DUBBING to OFF.
Basic Operations Basic Operations 13 4 Press P and then press PLAY on deck A. 5 Start dubbing. Press r on deck B ( ( is depressed automatically). Deck A Deck B Note During dubbing, do not set FUNCTION or press HIGH SPEED DUBBING as this causes excessive wow and flutter.
The CD Player 14 Using the display You can check information about the CD using the display. The CD Player DISPLAY Checking the total track number and playing time Check the display in stop mode. Checking the remaining time Press DISPLAY (DISPLAY/ENTER on the player) while playing a CD.
The CD Player 15 The CD Player Locating a specific track You can quickly locate any track using the number buttons. You can also find a specific point in a track while playing a CD. Number buttons = , + To locate Press a specific track directly the number button of the track.
The CD Player 16 Playing tracks r epeatedly (Repeat Play) You can play tracks repeatedly in normal, shuffle or program play modes (see page 17). 1 Set FUNCTION to CD on the player. 2 Press MODE (PLAY MODE on the player) until the repeat mode you want appears in the display.
The CD Player 17 The CD Player Cr eating your own pr ogram (Program Play) You can arrange the playing order of up to 20 tracks on a CD. Number buttons 1 Set FUNCTION to CD on the player. 2 Press MODE until “PGM” appears in the display. 3 Press the number buttons for the tracks you want to program in the order you want.
The CD Player 18 Creating your own program (Program Play) (continued) Tips • You can play the same program again, since the program is saved until you open the CD compartment or switch FUNCTION. • The current program will be erased if you switch FUNCTION or open the CD compartment.
The Tape Player 19 The Tape Player Recor ding thr ough a micr ophone/Using as a P A system Y o u c a n r e c o r d s o u n d u s i n g a m i c r o p h o n e ( n o t s u p p l i e d ) o r u s e p l a y.
Setting Up 20 Setting Up Hooking up the system Make sure you turn off the power before making any connections. 1 Hooking up the speakers 1 Align the grooves and slide the speaker box down until it snaps into place A.
Setting Up 21 Setting Up Tip Only for the customers supplied with an AC plug adaptor: Use the supplied AC plug adaptor if the plug of the AC power cord does not match your outlet. 2 Connect the black wires to (–) minus and the red wires to (+) plus terminals; the right speaker wires to the R and the left speaker wires to the L terminals.
Setting Up 22 Hooking up the system (continued) 3 Inserting batteries into the remote Insert two R6 (size AA) batteries (not supplied) Replacing batteries With normal use, the batteries should last for about six months. When the remote no longer operates the player, replace all the batteries with new ones.
Setting Up 23 Setting Up Connecting optional components You can enjoy the sound from a TV or VCR through the speakers of this player. For details, refer to the instruction manual of the component to be connected. Before making connections, be sure to turn off the power of each equipment, and set FUNCTION to TAPE•CD/RADIO OFF.
Setting Up 24 Adjusting the audio emphasis (DYNAMIC SOUND SYSTEM) You can adjust the audio emphasis of the sound you are listening to. Using the 5 BAND GRAPHIC EQUALIZER Slide 5 BAND GRAPHIC EQUALIZER to select the audio emphasis you want.
Additional Information 25 Pr ecautions Additional Information On placement • Do not leave the player in a location near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock. • Do not place the player on an inclined or unstable place.
Additional Information 26 Notes on CDs • Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. • Do not use solvents such as benzine, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs.
Additional Information 27 T r oubleshooting Remedy • Connect the AC power cord to a wall outlet securely. • Make sure the batteries are inserted correctly. • Set FUNCTION to the position you want to operate. • Adjust the volume. • Unplug the headphones when listening through speakers.
Additional Information 28 Remedy • Close the tape compartment securely. • Make sure the safety tab on the cassette is in place. • Make sure FUNCTION is set to “TAPE” or “DUBBING”. • Clean the erasing head (see page 29.) • Replace all the batteries with new ones if they are weak.
Additional Information 29 Maintenance After cleaning, insert a tape when the areas cleaned are completely dry. Demagnetizing the tape heads After 20 to 30 hours of use, enough residual magnetism will have built up on the tape heads to begin to cause loss of high frequency sound and hiss.
Additional Information 30 Specifications CD player section System Compact disc digital audio system Laser diode properties Material: GaAlAs Wave length: 780 nm Emission duration: Continuous Laser output: Less than 44.
Additional Information 31 Dimensions Approx. 761 × 245 × 258 mm (w/h/d) (30 × 9 3 ⁄ 4 × 10 1 ⁄ 4 inches) (incl. projecting parts) Mass Approx. 9.5 kg (20 lb. 15 oz) (incl. batteries) Supplied accessory AC power cord (1) Remote control (1) Design and specifications are subject to change without notice.
Additional Information 32 Index A Audio emphasis 24 B BALANCE 24 Batteries for player 22 for remote 22 C CD player 14 Cleaning cabinet 29 lens 29 tape heads and tape path 29 Connecting AC power cord 2.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Sony CFD-CD777L c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Sony CFD-CD777L - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Sony CFD-CD777L, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Sony CFD-CD777L va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Sony CFD-CD777L, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Sony CFD-CD777L.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Sony CFD-CD777L. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Sony CFD-CD777L ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
