Manuel d'utilisation / d'entretien du produit Grand Cinema Line RTX55 du fabricant Sim2
Aller à la page of 21
USER AND INSTALLATION MANUAL ENGLISH RTX 45-55.
IMPORT ANT SAFETY INSTRUCTIONS ! CAUTION ELECTRIC SHOCK HAZARD DO NOT OPEN For the DigiOptical Image Processor use exclusively the power supply unit provided or an alternative power supply unit expressly approved by SIM2. • Beware of power supply cables.
T ABLE OF CONTENTS INTRODUCTION ....................................................................................................................... 4 1 INST ALLA TION ................................................................................
4 INTRODUCTION Congratulations on your choice of the SIM2 Grand Cinema RTX system! The RTX system combines the signal processing capabilities of the DigiOptical Image Processor with the high fidelity reproduction of the DLP™ technology Display by linking the two units via a fibre optic cable.
5 DLP and DMD are registered trademarks of T exas Instruments. DCDi is a registered trademark of Faroudja, a division of Genesis Microchip, Inc. The DigiOptical Image Processor , which should be ideal.
6 CONNECTING THE TWO UNITS The RTX system consists of two separate units (the DigiOptical Image Processor and the Display), each of which is equipped with a power cable; the two units are interconnected by a 20 m fibre optic cable.
7 CONNECTING THE VIDEO SOURCES Connect the cables from the video sources, the serial cable from the external control unit and the optical fibre cables for connection to the Display , to the rear panel of the DigiOptical Image Processor .
8 Source Signal DigiOptical Image Processor Connector Input Te levision receiver from Antenna, Satellite or Cable (Analogue or Digital) Composite video S-Video Components RGB Vid eo S-Video Component/.
9 The video signals that can be connected to this input can have horizontal scanning frequencies of 15 kHz (standard video resolution), 32 kHz, or higher (progressive scanning video, high definition video). Some sources provide the facility to choose between a progressive signal or an interlaced signal.
10 SWITCHING ON AND OFF 2 OPERA TION will operate but it may be unable to read certain input signals correctly . Switching on the system: • from the remote control (keys 0-9) • from the Display keypad (keys and ). Ty pically , the picture will appear after 15-20 seconds.
11 E SC MEN U AU T O Navigate through and make adjustments to the on screen menus. switches on from stand-by and calls the Input Selection menu. (if pressed in the absence of the On Screen Display) calls the INFO information window MENU Activates the On Screen Display menus.
12 Not active in this model. Not active in this model. MENU Activates the On Screen Display menus and allows navigation though the various pages. FREEZE Freezes a moving picture. Not active in this model. STAND-BY Switches system to stand-by. KEYS 0-9 Switch system on from stand-by and allow direct source selection.
13 by pressing the ESC key , or when the time allowed for displaying the on-screen menu has lapsed (set in the Set-up Menu). Inputs 5, 6, 7 and 8 can receive RGB and YCrCb signals, at 15 kHz, 32 kHz or higher .
14 SHARPNESS MODE This allows you to select the type of processing associated with sharpness adjustment. In the case of a progressive or interlaced video signal VIDEO mode is advisable; with PC graphic signals use GRAPHIC MODE. FIL TER This allows you to select the mode in which the input signal is processed.
15 HIGH (corresponding to approx. 9300 degrees Kelvin), MEDIUM (approx. 6500 degrees Kelvin), LOW (approx. 5000 degrees Kelvin) and one PERSONAL setting controlled by the user with separate adjustments for RED, GREEN and BLUE. Generally , the HIGH value is more suitable for displaying graphic images, MEDIUM and LOW for video images.
16 MAINTENANCE AND TROUBLESHOOTING MAINTENANCE AND CLEANING The units in the system do not require internal adjustments and do not contain any user-serviceable parts. For replacement of the lamp or any other service requirements seek qualified technical assistance from your nearest Dealer .
17 Vi deo image showing colour misalignment on vertical details • Check compatibility of the video or graphic signals with the technical specifications of the system, and specifically , with the specifications of the selected input. • Adjust Y/C DELA Y settings in the IMAGE menu to reduce colour misalignment.
18 TECHNICAL SPECIFICA TIONS 3 ADDITIONAL INFORMA TION DISPLA Y OPTICAL Optical system: optical engine based on 1 DMD™ chip; sealed dust-proof housing DMD™ panel: TI HD2 0.8" 12 ° Dark Metal - 1280x720 pixels (aspect ratio 16:9) Projection lens: UltraWide angle F/2.
19 Colour temperature: from 5000 to 9300 ° K (three presets and one user settable) Control: infrared remote control, RS232 serial (DB9 connector , female) Out puts: 2 12-V jack connector outputs (1 a.
20 1227.8 mm - 48.34" 996.2 mm - 39.22" 1494.2 mm - 58.82" 1217.6 mm - 47.93" 956.3 mm - 37.65" 11 88 mm - 46.78" 235 mm 9.25" 368.6 mm 14.51" 11 08 mm - 43.62" 11 08 mm - 43.62" 245 mm 9.64" 420.
21 Brightness Contrast Colour Ti nt Sharpness Filter Cinema Mode Vid eo T ype Vid eo • S-Video [NTSC] YCrCb15kHz RGBS 15kHz RGBS 32kHz RGB Graphic DVI-D Language OSD Background OSD Position OSD T im.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Sim2 Grand Cinema Line RTX55 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Sim2 Grand Cinema Line RTX55 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Sim2 Grand Cinema Line RTX55, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Sim2 Grand Cinema Line RTX55 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Sim2 Grand Cinema Line RTX55, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Sim2 Grand Cinema Line RTX55.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Sim2 Grand Cinema Line RTX55. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Sim2 Grand Cinema Line RTX55 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
