Manuel d'utilisation / d'entretien du produit Newcastle R-965 du fabricant Sherwood
Aller à la page of 70
R - 965 Audio/V ideo Receiver.
2 Introduction READ THIS BEFORE OPERA TING Y OUR UNIT : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
3 ENGLISH 1. Read Instructions - All the safety and operating instructions should be read before the product is operated. 2. Retain instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the product and in the operating instructions should be adhered to.
4 CONTENTS • Introduction READ THIS BEFORE OPERATING YOUR UNIT | 2 SAFETY INSTRUCTION | 3 • System Connections | 5 • Front Panel Controls | 15 • Universal Remote Controls | 17 OPERATING COMPON.
SER. NO 3 12 8 1 10 14 11 7 4,12 7 2 5 6 43 9 51 3 System Connections • Pleas be certain that this unit is unplugged from the AC outlet before making any connections. • Since different components often have different terminal names, carefully read the operating instructions of the component connected.
6 ENGLISH TAPE MONITOR Tape deck, MD recorder, etc. AUDIO IN R L AUDIO OUT R L PHONO Turntable with MM type cartridge GND AUDIO OUT R L AUX CD recorder, MD recorder, etc. AUDIO IN R L AUDIO OUT R L CD CD player, etc. AUDIO OUT R L GND • The TAPE MONITOR IN/OUT jacks may also be connected to the LINE OUT/IN jacks of an optional graphic equalizer.
7 ENGLISH • The jacks of VIDEO 1 / VIDEO 2 may also be connected to a DVD recorder or other digital video recording component. For details , refer to the operating instructions of the component to be connected. • For ROOM 2 playback, the VIDEO 2 / ROOM 2 OUT jacks can be connected to the amplifier, TV , etc.
8 ENGLISH 4. CONNECTING DIGIT AL INs and OUT s • The OPTICAL and the COAXIAL DIGITAL OUTs of the components that are connected to CD, AUX and VIDEO 1~ VIDEO 6 of this unit can be connected to these DIGITAL INs. • A digital input should be connected to the components such as a CD player, LD player, DVD player, etc.
ENGLISH 9 6. CONNECTING PREOUT s • Use these jacks when adding additional power amplifiers. • Connect the PREOUT jacks to the powered speakers or the power amplifiers connected to speakers respectively. • When using only one surround back speaker, connect the SURROUND BACK LEFT jack to the power amplifier.
10 ENGLISH FRONT SURROUND A SURROUND B SURROUND BACK/SW SPEAKER R FRONT SURROUND A SURROUND B SURROUND BACK SPEAKER L CENTER Front right Front left Surround A right Surround B right Surround A left Surround B left Surround back right (or "Passive" subwoofer) Center Surround back left 7.
11 ENGLISH Ideal speaker placement varies depending on the size of your room and the wall coverings, etc. The typical example of speaker placement and recommendations are as follows : Front left and right speakers and center speaker • Place the front speakers with their front surfaces as flush with TV or monitor screen as possible.
8. CONNECTING SYSTEM CONTROL • Connect this jack to the DIGI LINK jack of the external Sherwood component that uses the DIGI LINK II or III remote control system.
13 ENGLISH 10. CONNECTING MUL TI-ROOM SYSTEM KIT • The multi-room system kit(sold separately ) is essential for operation from a remote location . For information on the multi-room system kit, contact the Xantech corporation at 1-800-843-5465 or www.
12. CONNECTING PC FOR UPGRADES • This receiver incorporates USB as well as RS-232C terminal that may be used in the future to update the operating software so that it will be able to support new digital audio formats, external control by using an external device and the like.
ENGLISH 15 Front Panel Controls 1. POWER switch 2. STANDBY button/indicator 3. DECODING MODE button 4. STEREO button 5. DIGITAL/ANALOG button 6. PURE AUDIO button 7. VIDEO SELECTOR button 8. AUDIO SELECTOR button 9. TAPE MONITOR button 10. 8 CH DIRECT button 11.
ENGLISH 16 FLUORESCENT DISPLAY 1. CHANNEL indicators 2. PCM SIGNAL indicator 3. SURROUND MODE indicators 4. TAPE MONITOR indicator 5. DIRECT indicator 6. STEREO indicator 7. AUTO indicator 8. SLEEP indicator 9. VIDEO INPUT indicators 10. MPEG SIGNAL indicator 11.
17 ENGLISH Universal Remote Controls This universal remote control can operate not only this receiver but also most popular brands of audio and video components such as CD players, DVD players, tape decks, TVs, VCRs, satellite receivers, cable boxes, etc.
18 ENGLISH FUNCTION TABLE of the NUMBERED BUTTONS. <POWER ON> <STANDBY> <CHANNEL SELECTOR> <CH LEVEL/ADJUST UP( )> <CH LEVEL/ADJUST DOWN( )> <VOLUME UP( )> <VOLU.
ENGLISH 19 Continued POWER - - - - - - - PLAY FORWARD SKIP REVERSE SKIP FORWARD SEARCH REVERSE SEARCH PAUSE RETURN STOP CURSOR CONTROL ENTER/SELECT 0~9 DISPLAY - SETUP TITLE AUDIO SUBTITLE SOUND OPEN/.
20 LO ADING B A TTERIES OPERA TING COMPONENTS WITH REMOTE CONTR OL 1 2 • When operating a Sherwood CD player or tape deck using the system remote control, aim the remote control at the REMOTE SENSOR on this unit. • However, in case of Sherwood DVD player or TV, aim it at the REMOTE SENSOR on the corresponding component.
21 ENTERING A SETUP CODE • This remote control can control up to ten different components. • Before operating audio and video components using the remote control supplied with this receiver, the setup code for each component should be entered.
22 • The code is saved and the Pre-PROgramming mode is resumed. • When you do not want to save the code, select the EXIT on the LCD screen or press the MAIN button. Confirm that it is the right code by selecting the SAVE. 8 Enter the 3 digit setup code aiming the remote control at the REMOTE SENSOR on the component.
ROOM 2 Remote Controls This remote control unit is an additional remote control unit for the ROOM 2 source playback only. • You can use the ROOM 2 functions with this remote control unit more conveniently in another room than with the universal remote control unit.
24 ENGLISH LISTENING T O A PR OGRAM SOURCE Operations Before operation Select the desired input source. 3 • Enter the standby mode. • The STANDBY button lights up in amber. This means that the receiver is not disconnected from the AC mains and a small amount of current is retained to support the operation readiness.
ENGLISH Operate the selected component for playback. 5 Select the tone mode as desired. 7 Select the digital or the analog input as desired. 4 At the tone defeat mode, each time the MULTI CONTROL knob is rotated, the tone defeat mode changes as follows: DEFEAT ON : When listening to a program source without the tone effect.
ENGLISH 26 • “MUTE” lights up. • To resume the previous sound level, press the button again. • Ensure that the HEADPHONE SELECTOR button is set to the speaker off mode. • Depending on the signal format which is being input, you can listen in different Dolby Headphone modes, stereo mode, etc.
ENGLISH DTS Digital Surround DTS Digital Surround(also called simply DTS) is a multi-channel digital signal format which can handle higher data rates. Discs bearing the “ ” include the recording of up to 5.1 channels of digital signals, which can be generally thought to provide better sound quality due to the lower audio compression required.
Dolby Pro Logic IIx surround Dolby Pro Logic IIx decodes all stereo (2 channel ) and 5.1 channel sources and extends to 7.1channel surround playback. It delivers the most natural, full range and immersing 7.
ENGLISH 29 For your reference, the sound from each channel can be reproduced according to the surround modes as follows: (*): Depending on the subwoofer mode setting, the sound from the subwoofer channel may be reproduced. • Depending on the speaker settings and the number of the encoded channels, etc.
ENGLISH 30 ENJO YING SURROUND SOUND • Surround sound effect will not work properly if the signal passes through a graphic equalizer. Please refer to your equalizer operating instructions for guidance on switching off (or defeating) the equalizer. Note: Before surround playback, first perform the SPEAKER SETUP procedure, etc.
ENGLISH Continued 31 When canceling the surround mode for normal stereo operation. • Depending on the signal format which is being input, either the stereo mode or the 2CH downmix mode is selected.
ENGLISH 32 To listen in a Dolby Headphone mode • The Dolby Headphone function simulates 5.1 channel surround sound, which allows you to enjoy 5.1 channel surround sound through 2 channel headphones, just like listening from 5.
ENGLISH STANDBY POWER ON MAIN P A G E FAV MUTE CH. SET VOL RETURN DISP MI OSD/MENU 1 STEREO CH/ ADJUST 2 3 4 5 6 7 8 9 0 ENT M2 M3 DSP DECODE DSP RNC-510 or DOWN UP CH/ ADJUST 33 Enter the test tone mode. 1 • The volume level of each channel can be adjusted easily with the test tone function.
34 ENGLISH Repeat the above steps and to adjust each channel level. 3 Adjust the level of the selected channel as desired. 2 STANDBY POWER ON MAIN PAGE FAV MUTE CH.
35 ENGLISH LISTENING T O RADIO BR O ADCASTS Auto tuning • Then “ AUTO” appears on the display. The tuner will now search until a station of sufficient strength has been found. The display shows the tuned frequency and “TUNED”. • If the station found is not the desired one, simply repeat this operation.
36 ENGLISH Repeat the above steps to to memorize other stations. 4 • When using the NUMERIC buttons on the remote control. Examples) For “3” : For “15” : For “30” : • The station has now been stored in the memory. • When using the NUMERIC buttons, the station is stored automatically without pressing the (ENTER/)MEMORY button.
ENGLISH • The receiver will start scanning the stations in the preset sequence and each station is received for 5 seconds. • At the desired station, press this button again to stop scanning. Scanning preset stations in sequence STANDBY POWER ON AUD2 SCH.
38 RECORDING • The analog signals from the 8 CH DIRECT inputs as well as the digital signals from DIGITAL inputs or USB can be heard but cannot be recorded. • The volume, channel level, tone(bass, treble) settings, etc. have no effect on the recording signals.
ENGLISH 39 DIGIT AL A UDIO RECORDING WITH MD RECORDER For digital recording, select the desired digital input as recording signal input. 2 Select a desired input of CD, AUX and VIDEO 1~VIDEO 6 as a recording source. 1 Start recording on the component connected to OPTICAL or COAXIAL DIGITAL OUT.
ENGLISH 40 O THER FUNCTIONS • This function compresses the dynamic range of previously specified parts of the Dolby Digital sound track(with extremely high volume)to minimize the difference in volume between the specified and non- specified parts. This makes it easy to hear all of the sound track when watching movies at night at low levels.
ENGLISH 41 Select the desired input source to enter its label. 1 Press the LABEL button to enter the label input mode. Example ) When selecting VIDEO 1. 2 Select the character on the flickering digit. 3 Confirm your selection. 4 Repeat the above steps and to enter the desired characters on the rest of the digits.
42 ROOM 2 SOUR CE PLA YB AC K When using the ROOM 2 remote control unit • You can use the ROOM 2 function with the ROOM 2 remote control unit more conveniently. • This function allows enjoying one source in the main room and playing another in a different room at the same time.
ENGLISH 43 Using the OSD CURRENT ST A TUS DISPLA Y This mode shows the status corresponding to each operation. • The on-screen display will automatically disappear in several seconds.
ENGLISH 44 Select the desired menu using the CURSOR UP( )/DOWN( ) buttons. 2 Confirm your selection. 3 • The selected category or item will provide the needed setting details using the subsequent screens.
ENGLISH • After you have installed this unit and connected all the components, you first perform the speaker setup settings for the optimum sound acoustics according to your environment and speaker layout.
ENGLISH 46 • Depending on your speaker type, you can select one of these following speaker types. • Yes/No : Select the desired depending on whether a subwoofer is connected or not. • Large : Select this when connecting speakers that can fully reproduce sounds below crossover frequency.
ENGLISH 47 Press the CURSOR UP( )/DOWN( ) buttons to select the SPEAKER DISTANCE, then press the ENTER button. 1 When selecting the SPEAKER DISTANCE • Then “ ” and “ ” are moved to the unit mode. • Each time these buttons are pressed, “Meters” or “Feet” is selected.
ENGLISH 48 Press the CURSOR LEFT( )/RIGHT( ) buttons to select the DOLBY VS(Virtual Speaker) mode as desired. 2 • Each time these buttons are pressed, the Dolby Virtual Speaker mode changes as follows : On : Select this to activate the Dolby Virtual Speaker function.
ENGLISH 49 Note : • When “S/B CH” is set to “2 CH” on the SPEAKER CONFIGURATION menu, the SUBWOOFER cannot be selected. • Depending on your subwoofer type , you can select one of following types. ACTIVE: Select this when connecting the powered subwoofer to “ SW ” of PREOUT jacks.
ENGLISH 50 Press the CURSOR LEFT( )/RIGHT( ) buttons to select the desired crossover frequency. 2 • You can select the desired within 40~120 Hz in 20 Hz intervals(default value: 80 Hz).
51 ENGLISH • Loud test tones are output from each speaker and then if auto speaker setup procedure has been completed, the results of each adjustment will be displayed. • Each time the ENTER button is pressed, the auto speaker setup procedure will start or stop.
52 ENGLISH Notes: • For your reference, other channel levels displayed are the relative levels as compared with FL channel, not adjusted levels. • Depending on “POWER AMP ASSIGN” and “SUBWOOFER” settings, etc., some channels may be excluded.
ENGLISH 53 • Each time these buttons are pressed, “ ” and “ ” are moved to the corresponding DIGITAL IN. • You should assign the connected DIGITAL INs to the desired of CD, AUX and VIDEO 1~6. (For details, refer to “CONNECTING DIGITAL INs and OUTs” on page 8.
ENGLISH 54 • Each time these buttons are pressed, the modes change as follows: Press the CURSOR UP( )/DOWN( ) buttons to select the TONE CONTROL, then press the ENTER button.
ENGLISH 55 • Each time these buttons are pressed, the video input source changes. STANDBY POWER ON MAIN PAGE FAV MUTE CH. SET VOL RETURN DISP MI OSD/MENU 1 STEREO CH/ ADJUST 2 3 4 5 6 7 8 9 0 ENT M2 M3 DSP DECODE DSP RNC-510 Press the CURSOR UP( )/DOWN( ) buttons to select the CURRENT VIDEO.
ENGLISH 56 Press the CURSOR UP( )/DOWN( ) buttons to select the COMPONENT VIDEO SETUP, then press the ENTER button. 1 When selecting the COMPONENT VIDEO SETUP • Each time these buttons are pressed , the COMPONENT VIDEO INs change .
ENGLISH 57 • To turn on the component connected to DC TRIGGER OUT 2 jack when the desired input source is selected, you should link DC TRIGGER 2 with the desired input source. Press the CURSOR UP( )/DOWN( ) buttons to select the DC TRIGGER 2, then press the ENTER button.
ENGLISH 58 • Each time these buttons are pressed, the digital re- mastering mode changes as follows: On : Select this to process the input signal digitally and to convert its sampling frequency to 192 kHz for an more detailed sound reproduction. Off : Select this to cancel the digital re-mastering function.
ENGLISH 59 • Each time these buttons are pressed, the A/V SYNC can be adjusted within the range of 0~6 frame. Press the CURSOR UP( )/DOWN( ) buttons to select the A/V SYNC. 1 Press the CURSOR LEFT( )/RIGHT( ) buttons to adjust the A/V SYNC as desired.
ENGLISH 60 When selecting the DECODING MODE, SURROUND MODE, DYNAMIC RANGE • Each time these buttons are pressed, “ ” and “ ” are moved to the corresponding mode.
ENGLISH 61 When the SURROUND MODE is selected • Depending on the input signal format and the selected decoding mode, you can select the desired surround mode as follows: Signal format being input Selected decoding mode Selectable surround mode Dolby Digital 5.
ENGLISH 62 Press the CURSOR UP( )/DOWN( ) buttons to select the PL II(x) MUSIC PARAMETER, then press the ENTER button. 1 When selecting the PL IIx MUSIC PARAMETER(or the PL II MUSIC PARAMETER) When se.
ENGLISH 63 • Each time these buttons are pressed , the mode changes as follows : CALL : Select this to recall the channel levels memorized into preset memory . SAVE : Select this to memorize the channel levels adjusted in the CH LEVEL TRIM menu or in “ Adjusting the current channel levels ” procedure on page 33.
ENGLISH 64 • Each time these buttons are pressed, “ ” is moved to the corresponding channel. Note : • Depending on the speaker settings and surround mode, etc., some channels cannot be selected. • You can adjust the current channel levels as desired.
ENGLISH 65 Repeat the above steps and until each level is adjusted as desired. 4 • Each time these buttons are pressed, “ ” is moved to the corresponding LFE level mode.
ENGLISH 66 • The ROOM 2 function allows enjoying one source in the main room while playing another in a different room at the same time. • The analog signals from the 8 CH DIRECT inputs and TAPE MONITOR INs cannot be output from the VIDEO 2 / ROOM 2 (audio) OUTs.
ENGLISH 67 • Each time these buttons are pressed, the ROOM 2 FEED mode is changed to “On” or “Off”. • When the ROOM 2 FEED mode is set to “Off”, the ROOM 2 source cannot be selected. • When you do not use the ROOM 2 function, set the ROOM 2 FEED mode to Off to save electricity.
68 T roubleshooting Guide PROBLEM POSSIBLE CAUSE REMEDY No power No sound No sound from the surround speakers No sound from the center speaker No sound from the surround back speakers Stations cannot .
AMPLIFIER SECTION • Power output, stereo mode, 8 Ω , THD 0.05%, 20 Hz~20 kHz | 2 120 W • Total harmonic distortion, 8 Ω , 120 W, 1 kHz | 0.05 % • Intermodulation distortion 60 Hz : 7 kHz = 4 : 1 SMPTE, 8 Ω , 120 W | 0.09 % • Input sensitivity/impedance Phono (MM) | 2.
R - 965 5707-04744-001-1 Audio/V ideo Receiver.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Sherwood Newcastle R-965 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Sherwood Newcastle R-965 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Sherwood Newcastle R-965, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Sherwood Newcastle R-965 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Sherwood Newcastle R-965, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Sherwood Newcastle R-965.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Sherwood Newcastle R-965. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Sherwood Newcastle R-965 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
