Manuel d'utilisation / d'entretien du produit PN-T321 du fabricant Sharp
Aller à la page of 33
PN-T321 LCD MONIT OR OPERA TION MANUAL.
IMPORT ANT : T o aid reporting in case of loss or theft, please record the product’s model and serial numbers in the space provided. The numbers are located in the rear of the product.
1 E IMPORT ANT INFORMA TION W ARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE P ARTS INSIDE.
2 E Thank you for your purchase of a SHARP LCD product. T o ensure safety and many years of trouble-free operation of your product, please read the Safety Precautions carefully before using this product.
3 E SAFETY PRECAUTIONS (Continued) 19. Batteries — Incorrect use of batteries may cause the batteries to burst or ignite. A leaky battery may corrode the equipment, dirty your hands or spoil your clothing.
4 E - The TFT color LCD panel used in this monitor is made with the application of high precision technology . However , there may be minute points on the screen where pixels never light or are permanently lit. Also, if the screen is viewed from an acute angle there may be uneven colors or brightness.
5 E MOUNTING PRECAUTIONS • This product is for use indoors. • Consult your dealer before installing, removing or moving the monitor . • A mounting bracket compliant with VESA specications is required. Do not use any screw holes other than VESA holes for installation.
6 E Supplied Components If any component should be missing, please contact your dealer . Liquid Crystal Display Monitor: 1 Remote control unit: 1 (Battery preinstalled) Cable clamp: 1 Power cord Conversion cable (for A V component): 1 (green/blue/red) * Sharp Corporation holds authorship rights to the Utility Disk program.
7 E n Front view 1 234 5 1. LCD panel 2. Power LED (See page 13.) 3. Power switch (See page 13.) 4. Input switch (See page 14.) 5. Remote control sensor (See page 12.) TIPS • Use a pointed object such as a pen tip to press the switches at the operation panel.
8 E Part Names n Remote control unit 1 2 3 4 5 6 7 8 9 1. Signal transmitter 2. POWER button (See page 13.) 3. MUTE button (See page 14.) 4. VOL +/- buttons (See page 14.) BRIGHT +/- buttons (See page 14.) Cursor control ( / / / ) buttons 5. DISPLA Y button (See page 14.
9 E Connecting Peripheral Equipment Caution • Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/ disconnecting cables. Also, read the manual of the equipment to be connected. • Be careful not to confuse the input terminal with the output terminal when connecting cables.
10 E Connecting the Power Cord Caution • Do not use a power cord other than the one supplied with the monitor . 1. T urn of f the main power switch. 2. Plug the power cord (supplied) into the AC input terminal. 3. Plug the power cord (supplied) into the AC power outlet.
11 E Binding Cables The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamp. Attach the cable clamp to the back of the monitor , and fasten the cables. Setting the USB ash drive cover 1. Insert the USB ash drive into the USB port.
12 E Batteries and an insulation sheet are preinstalled in the remote control at the factory . Before using the remote control, be sure to remove the insulation sheet. Insulation sheet Pull out Changing the battery 1. Pull out the battery case. Press the catch on the battery case while pulling out the case.
13 E T urning Power On/Off Caution • T urn on the monitor rst before turning on the PC or playback device. T urning on the main power Main power switch Caution • The main power must be turned on/off with the main power switch. Do not connect/disconnect the power cord or turn the breaker on/off while the main power switch is on.
14 E Basic Operation 1 2 3 4 5 6 7 8 1. INPUT (Input mode selection) The men u is displayed. Press or to select the input mode, and press to enter . * Y ou can select the input terminal by pressing the input switch of the monitor .
15 E Basic Operation n Switching the screen size Even when the screen size is changed, the display may remain the same depending on the input signal. WIDE Displays image so it lls the entire screen. ZOOM 1 An image with a 4:3 aspect ratio is enlarged to ll the entire screen without changing the aspect ratio.
16 E Basic Operation Auto playback of image and audio les (Slideshow) When the input mode is set to USB and a USB ash drive is inserted in the USB port, the image les in the root folder of the USB ash drive will be automatically displayed as a slideshow .
17 E Menu Items Displaying the menu screen Video and audio adjustment and settings of various functions are enabled. This section describes how to use the menu items. See pages 18 to 19 for details of each menu items. Caution • Do not turn the main power switch off while the menu items are being displayed.
18 E Menu item details The menu will differ depending on the input mode. n SCREEN (D-SUB input) AUTO The CLOCK, PHASE, H-POS, and V -POS are automatically adjusted. Pressing performs adjustment. Use this automatic adjustment when you use the PC D-sub input terminal to display a PC screen for the rst time or when you change the setting of the PC.
19 E n SETUP THERMAL SENSOR SETTING Sets the orientation of the temperature sensor . Change this setting if you change the installation orientation (vertical or horizontal) of the monitor . LANDSCAPE ...... horizontal orientation PORTRAIT ......... vertical orientation LANGUAGE Sets the display language for the menu screen.
20 E Menu Items Adjustments for PC screen display n Automatic adjustment When you use the PC D-sub input terminal to display a PC screen for the rst time, or when you change the setting of the PC, use the automatic screen adjustment. 1. Switch the input to D-SUB and display the adjustment pattern.
21 E Y ou can return the settings to their factory-preset values and restrict operations. 1. After pressing for about 5 seconds, press , , , and in that order . 2. Press . 3. Select and set the items. ALL RESET Press , to reset the settings to the factory default settings.
22 E Controlling the Monitor with a PC (RS-232C) Y ou can control this monitor from a PC via RS-232C (COM port) on the PC. PC connection Connect with RS-232 straight cable between the PC’s COM port (RS-232C connector) and the RS-232C input terminal on the monitor .
23 E Controlling the Monitor with a PC (RS-232C) n Response code format When a command has been executed correctly O K Return code (0D H , 0A H ) A response is returned after a command is executed.
24 E RS-232C command table How to read the command table Command: Command eld (See page 22.) Direction: W When the “Parameter” is set in the parameter eld (see page 22), the command functions as described under “Control/Response Contents”.
25 E Others Function Command Direction Parameter Reply Control/Response contents * SCREEN SIZE (DVI-D, D-SUB) WIDE WR 1-5 1-5 1: WIDE, 2: NORMAL, 3: Dot by Dot, 4: ZOOM1, 5: ZOOM2 No SCREEN SIZE (HDMI.
26 E T roubleshooting If you are experiencing any problem with your display , before calling for service, please review the following troubleshooting tips. There is no picture or sound. • Is the power cord disconnected? (See page 10.) • Is the main power switch off? (See page 13.
27 E Specications n Product Specications Model PN-T321 LCD component 32" Class [31-1/2 inch (80 cm) diagonal] TFT LCD Max. resolution (pixels) 1366 x 768 Max.
28 E Specications n Dimensional Drawings Note that the values shown are approximate values. 30-1/4 [769] Opening width ( 27-5/8 [701]) 18-13/16 [478] Opening height (15-9/16 [396]) 18-1/8 [461] 7-7/8 [200] 1 [25.3] 7-7/8 [200] VESA holes * Unit: inch [mm] 1-15/16 [49.
29 E n Compatible signal timing (PC) VESA Wide US TEXT Sun Screen resolution Hsync Vsyn c D ot frequency Digital 640 × 480 800 × 600 848 × 480 1024 × 768 1 152 × 864 *1 1280 × 768 1280 × 800 *1.
30 E Specications n PC/A V DVI-D input terminal pins (DVI-D 24 pin) No. Function No. Function 1 TMDS data 2- 13 N.C. 2 TMDS data 2+ 14 +5V 3 TMDS data 2/4 shield 15 GND 4 N.C. 16 Hot-plug detection 5 N.C. 17 TMDS data 0- 6 DDC clock 18 TMDS data 0+ 7 DDC data 19 TMDS data 0/5 shield 8 N.
PN-T321 M EN10M(1).
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Sharp PN-T321 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Sharp PN-T321 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Sharp PN-T321, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Sharp PN-T321 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Sharp PN-T321, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Sharp PN-T321.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Sharp PN-T321. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Sharp PN-T321 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
