Manuel d'utilisation / d'entretien du produit LC 32GD6U du fabricant Sharp
Aller à la page of 104
LIQUID CR YST AL TELEVISION TÉLÉVISEUR A CL TELEVISOR CON P ANT ALLA DE CRIST AL LIQUIDO OPERA TION MANU AL MODE D’EMPLOI MANU AL DE OPERACIÓN LC-37GD6U LC - 32GD6U LC-26GD6U ENGLISH LC-37GD6U LC.
ENGLISH LC-37GD6U LC-32GD6U LC-26GD6U LIQUID CR YST AL TELEVISION ENGLISH OPERA TION MANU AL IMPOR T ANT INFORMA TION W ARNING: T O REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NO T EXPOSE THIS PR ODUCT T O RAIN OR MOISTURE.
2 IMPOR T ANT INFORMA TION W ARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not e xpressly approv ed by the manuf acturer could void the user’ s authority to operate this equipment. CA UTION: T O PREVENT ELECTRIC SHOCK, MA TCH WIDE BLADE OF PLUG T O WIDE SLO T , FULL Y INSERT .
3 DEAR SHARP CUST OMER Thank y ou for your pur chase of the Sharp Liquid Crystal T elevision. T o ensure safety and many y ears of troub le-free operation of your product, please read the Impor tant Safety Instructions carefull y bef ore using this product.
4 IMPOR T ANT SAFETY INSTR UCTIONS • W ater and Moisture — Do not use this pr oduct near water – for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. • Stand — Do not place the product on an unstable cart, stand, tripod or table.
5 IMPOR T ANT SAFETY INSTR UCTIONS • Outdoor Antenna Gr ounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to pr ovide some protection against voltage surges and built-up static charges.
6 Contents IMPORT ANT INFORMA TION ……………………… 1 DEAR SHARP CUST OMER ………………………… 3 IMPORT ANT SAFETY INSTRUCTIONS …………… 3 Contents ………………….
7 Contents Character Edge …………………………… 76 Secret number setting for par ental control (A V input mode only) ……………………… 77 Parental contr ol (setting V -CHIP level.
8 Supplied accessories Make sure the following accessories ar e provided with the pr oduct. NO TE • Always use the AC cord supplied with the LCD-TV .
9 Setting the TV in place Handling the Display CA UTION • Select a place with no direct sunlight and good ventilation. • Do not remove the stand and speaker fr om the Display unless using an optional bracket to mount it. • Keep enough space above and behind the Display .
10 Display (rear vie w) Setting the TV After putting the Display in place, connect the AC cord. Use the cable clamp for bundling the cables. Preparation Connecting the A C cord to the Displa y 1 2 3 R.
11 Removing speaker s Preparation NO TE • T o attach the speakers, perform the steps in reverse order . CA UTION • Do not r emove the stand and speaker from the Display unless using an optional bracket to mount it. • Befor e per forming work spread cushioning over the base area to lay the Display on.
12 Preparation Removing the stand Befor e detaching (or attaching) stand, unplug the AC cord fr om the AC input ter minal. CA UTION • Do not remove the stand fr om the Display unless using an optional wall mount brac ket to mount it. Bef ore attaching/detaching stand • Befor e per forming work make sure to turn off the TV .
13 1 Open the battery cover . 2 Insert two “AAA” size batteries (supplied with the product). • Place the batteries with their terminals corresponding to the ( e ) and ( f ) indications in the battery compar tment. 3 Close the battery cover . CA UTION Improper use of batteries can r esult in chemical leakage or explosion.
14 P ar t names POWER indicator OPC sensor Displa y POWER button INPUT button VOLUME buttons (VOL l / k ) CHANNEL buttons (CH s / r ) Remote control sensor *OPC: Optical Picture Contr ol (See page 33.) SLEEP indicator OPC indicator Headphone jack CARD indicator * The examples used throughout this manual are based on the LC-32GD6U model.
15 LC-37GD6U LC-32GD6U LC-26GD6U P ar t names Displa y * Press RESET if the system cannot return to its original state after perfor ming various operations.
16 P ar t names Remote contr ol unit 3 2 11 7 5 6 4 7 20 18 19 21 22 23 82 4 92 5 10 26 11 28 29 30 13 14 15 12 31 16 33 27 32 1 TV PO WER: Switches the Liquid Crystal T elevision power on or Standby . (See page 20.) 2 DISPLA Y : Displays the channel information.
17 W atching TV Simple operations for watching a TV pr ogram Antennas T o enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable.
18 W atching TV A-2. Connecting with cable con ver ter using A UX terminals for audio and video output. (If y our cable TV con ver ter has both RF OUTPUT and A UX terminals, it is recommended to connect it as shown in e xample A-1.
19 W atching TV C. Connecting Antenna Cable with VCR NO TE • Be sure to remember what kind of connection is made with your TV . • Shown here is the preferr ed method of connecting a VCR to your TV if you are in an area with good signal r eception.
20 Display PO WER T urning on the power ON Displa y status indicator w/o CableCARD POWER indicator Pr ess PO WER on the Display or press TV PO WER on the remote contr ol. • POWER indicator (Blue): The TV is on. (After a few seconds, a window appears with sound.
21 W atching TV Press a / b to select the desired language listed on the screen, and then pr ess ENTER . Press c / d to select “Air” or “Cable” for ANALOG-A, then press a / b to move down. Press c / d to select “Air” or “Cable” for ANALOG-B, then press a / b to move down.
22 W atching TV Changing channels - Analog-TV Y ou can change channels in several ways. NO TE • While watching a broad cast, pr ess A-ANALOG-B to view the image received fr om the other tuner . Method 1 Using CH r / s on the remote contr ol unit or on the display .
23 W atching TV V olume adjustment Mute • T o increase the volume, press V OL k k k k k . • T o decrease the volume, pr ess V OL l l l l l . NO TE Output de vice V ariable sound Output Select V ariable Fixed V ariable sound Constant as specified Mute • VO L l / k on the Display operates the same as VO L k / l on the r emote control unit.
24 W atching TV NO TE • MTS only operates while in TV mode. Y ou can change MTS as shown below to match the television br oadcast signal. STEREO k SAP mode MONO mode Examples: when receiving MTS and.
25 Connecting Digital Cable Module Digital Cable Module is called CableCARD™. By attaching the CableCARD, you can r eceive various digital services provided by your Cable Company . T o obtain and use a CableCARD you need to first submit an application.
26 Basic adjustment settings A V input mode men u items List of A V menu items to help y ou with operations OPC ................................................ P ag e 33 Backlight ........................................ Pa ge 32 Contrast ...........
27 Basic adjustment settings P ower Management ...................... P ag e 37 Speaker Setup ............................... Page 64 Input Signal ................................... Pa ge 70 A uto Sync. ..................................... P ag e 65 Input Label .
28 Basic adjustment settings Antenna setting Make sure what kind of connection is made with your TV when selecting “Air” or “Cable” for ANALOG-A, B and DIGIT AL. 6 7 Sear ching TV channels Press c / d to select “Air” or “Cable” for ANALOG-A, then press a / b to move down.
29 Basic adjustment settings Channel searc h Channel auto search makes the TV look for all channels viewable in the set ar ea. Press MENU and the MENU screen displays. Press c / d to select “Setup”. 1 2 3 Press a / b to select “CH Search”, and then press ENTER .
30 Basic adjustment settings Antenna Setup - DIGIT AL In order to enjoy digital br oadcasts, you need a digital broadcast antenna. Y ou can set the antenna configuration through the Antenna Setting scr een. 1 2 Press MENU and the MENU scr een displays.
31 Basic adjustment settings F av orite channel setting This function allows you to program 4 favorite channels, in 4 differ ent categories. By setting the favorite channels in advance, you can select your favorite channels easily . Press EDIT . Press a / b to select “Register”, and then press ENTER .
32 Adjustments items for PC sour ce Basic adjustment settings c button The screen dims For less contrast For less brightness For less color intensity Skin tones become purplish For less sharpness Sele.
33 OPC setting Automatically adjusts the brightness of the scr een. Press c / d to select “Picture”. 2 Press MENU and the MENU screen displays. 1 Press a / b to select “OPC”.
34 Basic adjustment settings Color temperature For a better white balance, use color temperature correction. 4 5 Press a / b to select “Color T emp.”, and then press ENTER . Description White with Bluish tone White with Reddish tone Selected item High Mid-High Middle Mid-Low Low Press MENU and the MENU screen displays.
35 Basic adjustment settings Monochr ome For viewing a video in monochrome. Description Normal color For viewing in monochrome Selected item Off On Press a / b to select “Monochrome”, and then press ENTER . 4 Press c / d to select “On”, and then pr ess ENTER .
36 Basic adjustment settings Sound adjustment Y ou can adjust the sound quality to your prefer ence with the following settings. Press c / d to select “Audio”. Press a / b to select a specific adjustment item. Press c / d to adjust the item to your desired position.
37 Basic adjustment settings No signal off When set to “Enable”, the power will automatically shut down if no signal inputs for 15 minutes. Press a / b to select “No Signal Off”, and then press ENTER . Press c / d to select “Enable”, and then press ENTER .
38 Basic adjustment settings (DIGIT AL) Digital Setup This setting allows you to set the image of Digital broadcasting. Video Setup Y ou can adjust the settings for Digital image. 1 2 3 Press MENU and the MENU scr een displays. Press c / d to select “Digital Setup”.
39 Basic adjustment settings (DIGIT AL) A udio Setup Y ou can output digital audio to an A V amp or similar device whose DIGIT AL AUDIO INPUT terminal is connected to the DIGIT AL AUDIO OUTPUT terminal on the Display . Please select an audio output format compatible with the audio format of the program you are watching and the equipment connected.
40 Important notes on using memor y car ds • W e will not be liable for misuse of the LCD TV set, any troubles during use, or other problems, or any damages arising out of the use of the LCD TV set, except for the cases for which we ar e liable by statute.
41 Using memory card Y ou can use memory cards (commer cially available) for r ecording and playing back pictur es. • Please use an appropriate PC car d adapter (commercially available) for each memory card. • Following memory cards ar e available.
42 Using memory card Card Setup mode men u items Card Setup Still Setup Slide Show File Operation Video Setup Format Audio Select My Program Rec. Mode Repeat Play Pre Recor d Y es/No File Operation In.
43 Using memory card Inserting a PC card adapter • Pr ess in the EJECT button if it is popped out. • Insert a memor y card to a PC car d adapter beforehand. (See page 41.) • Insert the PC adapter card slowly . Ejecting the car d • Make sur e the card indicator lights up gr een.
44 Using memory card Recording a still image Y ou can recor d a still image on the card. Press REC . 1 2 Press FREEZE . 3 Press ENTER to update the still image. Onion Tomato Potato x 1 x 1 x 1 Still Cooking Time Onion Tomato Potato x 1 x 1 x 1 Cooking Time Still Still image captured on card.
45 Using memory card Setting/unprotecting Slide Sho w Y ou can adjust the interval, order and r epeat settings. 4 5 Press a / b to select “Slide Show”, and then press ENTER . Press MENU and the MENU screen displays. 2 Press c / d to select “Car d Setup”.
46 Using memory card Pr otecting/unprotecting still picture files Y ou can protect any file you do not want to delete. 5 6 Press a / b to select “File Operation”, and then press ENTER . 2 3 4 Slide Show My Program Audio Select File Operation Protect Delete File Delete All Press a / b to select “Protect”, and then press ENTER .
47 Using memory card Recording a motion picture Use this setting to recor d images you are currently watching. Record with the settings made in “Rec. Mode” and “Pre Recor d”. Press REC to start recor ding. • CARD indicator lights up red. • Recording information displays in the lower right corner of the screen.
48 Using memory card Pre Recor d Y ou can recor d the picture slightly before the point wher e you pressed the r ecord button, enabling you to recor d just the scene you wanted.
49 Using memory card Deleting a motion picture file 5 6 2 3 4 Press a / b to select “Delete File”, and then press ENTER . Press a / b / c / d to select the file you want to delete, and then press ENTER . Repeat step 1 to 5 in Protecting motion picture files .
50 Using e xternal equipment Y ou can connect many types of external equipment to your System, like a DVD player , VCR, Digital TV tuner , PC, HDMI equipment, game console and camcorder . T o view external source images, select the input sour ce from INPUT on the remote contr ol unit or on the Display .
51 Using external equipment Connecting a D VD play er Y ou can use the INPUT 1, INPUT 2, INPUT 4 or INPUT 5 terminals when connecting to a DVD player and other audiovisual equipment. NO TE • See page 54 for connecting a DVD player with HDMI terminal.
52 Using external equipment VCR A V cable (commercially available) Connecting a VCR Y ou can use the INPUT 3 terminal when connecting a VCR and other audiovisual equipment.
53 Using external equipment Connecting a Digital TV STB Y ou can use the INPUT 1, INPUT 2, INPUT 4 or INPUT 5 terminals when connecting a Digital TV STB and other audiovisual equipment.
54 Using external equipment Connecting HDMI equipment Y ou can use the INPUT 4 terminal when connecting an HDMI equipment. HDMI equipment HDMI cable (Commercially available) Displaying an image fr om .
55 Using external equipment Connecting a PC Use the INPUT 5 terminal to connect a PC. NO TE • Refer to page 81 for a list of PC signals compatible with the TV . PC with D VI terminal ø 3.5 mm stereo minijack cable (commercially available) DVI cable (Commercially available) ø 3.
56 Connecting D-VHS Dec ks (i.LINK connection) Using external equipment About i.LINK i.LINK is an interface connection using a serial transfer system and is able to transfer multimedia data, such as digital images and digital sound, between devices that have i.
57 Using external equipment Setting the recording mode (i.LINK) • The function for automatically adjusting the r ecording mode of connected D-VHS decks can be turned on or off.
58 Using external equipment Selecting a D-VHS deck (i.LINK) • In or der to control a D-VHS deck from the TV , you must first choose the D-VHS deck to be controlled. • One D-VHS deck can be chosen from up to 16 i.LINK connected decks. • All D-VHS decks connected with i.
59 Using external equipment Deleting a preset D-VHS deck (i.LINK) • Pr eset D-VHS decks can be selected from a list. • If a D-VHS deck is connected, it cannot be deleted from the list. Press i.LINK to display the i.LINK contr ol panel. Press a / b / c / d to select “Selecting a device”, and then press ENTER .
60 NO TE • Even when a connected D-VHS deck is playing, input signal can be switched to digital broadcasting by shifting the cursor to the input selection button and pressing ENTER . • This TV may not be able to operate some D-VHS decks using the control panel, or to display pictur e and/or sound input from some D-VHS decks.
61 Using external equipment Recording digital pr ograms with a D-VHS deck (i.LINK) • Before commencing this procedur e, the steps in “i.LINK Setup” on page 57 need to be completed beforehand. • Please also refer to the operation manual of the D- VHS deck to be used with this TV .
62 Useful adjustment settings Image position (A V input mode only) For adjusting a picture’ s horizontal and vertical position. 1 2 Press MENU and the MENU screen displays. Press c / d to select “Setup”. 4 5 3 Press a / b to select “Position”, and then press ENTER .
63 Rear view Useful adjustment settings Connecting e xternal speakers When using external speakers • Change the speaker setting to external speakers. (See page 64.) Make sure to connect the speaker terminal and cable polarity ( L , + ) properly • The speaker terminals have plus ( L ) and minus ( + ) polarity .
64 Useful adjustment settings A udio Quality Control Audio Quality Contr ol automatically optimizes the audio quality to suit internal (supplied) speakers. Press MENU and the MENU screen displays. Press c / d to select “Setup”. 1 2 Press c / d to select “Equalizer” or “Flat”, and then press ENTER .
65 Useful adjustment settings 1 2 A uto Sync. adjustment (PC input mode only) For automatically adjusting the PC image. Press MENU and the MENU screen displays. Press c / d to select “Setup”. 4 3 Press a / b to select “Auto Sync.”, and then press ENTER .
66 Useful adjustment settings Input Select Press MENU and the MENU screen displays. 1 2 3 Press c / d to select “Option”. Press a / b to select “Input Select”, and then press ENTER . Press INPUT . • A list of selectable sources appears. Press INPUT again to select the input source.
67 Useful adjustment settings Input Label Lets you set the input terminal displayed using the INPUT SOURCE menu or channel display . Press MENU and the MENU screen displays. 3 4 Press c / d to select “Setup”. Press a / b to select “Input Label”, and then press ENTER .
68 Useful adjustment settings A V MODE A V MODE gives you six viewing options to choose from to best match envir onment of the TV , which can vary due to factors like room brightness, type of program watched or the type of image input fr om external equipment.
69 Useful adjustment settings Input signal (1024 m 768) Input signal (640 m 480) View mode (f or PC input mode) Y ou can select the screen size. a View Mode Normal Stretch Dot by Dot Zoom View Mode Zoom Dot by Dot Stretch Input signal Normal Zoom Stretch Dot by Dot Input signal Normal Zoom Stretch Dot by Dot ex.
70 Useful adjustment settings Press MENU and the MENU screen displays. 1 2 Press a / b to select “Input Signal” and then press ENTER . 3 Press c / d to select “Setup”.
71 Useful adjustment settings Description • Sound via speaker is adjusted with VO L k / l on the remote control unit or VO L l / k on the Display . • Sound via the MONITOR OUTPUT ter minal is not adjustable and constantly outputs.
72 Title Displa y T ype Select the CH display for Digital br oadcasting. 1 2 4 3 Press MENU and the MENU scr een displays. Press c / d to select “Option”. Press a / b to select “Title Display T ype”, and then press ENTER . Press c / d to select “Y es” or “No”, and then press ENTER .
73 Useful adjustment settings Closed caption • Y our TV is equipped with an internal closed caption decoder . Closed caption is the system which allows you to view conversations, narration, and sound effects in TV pr ograms and home videos as subtitles on your Display .
74 Useful adjustment settings Caption Size Select a caption size. 4 Press a / b to select “Caption Size”. Press MENU and the MENU screen displays. 1 2 Press c / d to select “Option”. 3 Press a / b to select “Caption Setup”, and then press ENTER .
75 Useful adjustment settings Foreground Color Select a character for eground color . 4 Press a / b to select “For eground Color”. Press MENU and the MENU screen displays. 1 2 Press c / d to select “Option”. 3 Press a / b to select “Caption Setup”, and then press ENTER .
76 Useful adjustment settings Backgr ound Opacity Select a background opacity value. Press a / b to select “Background Opacity”. 4 Press c / d to select the desir ed value. 5 Press MENU and the MENU screen displays. 1 2 Press c / d to select “Option”.
77 Useful adjustment settings Secret number setting f or parental contr ol (A V input mode only) Allows you to use a secret number to pr otect cer tain settings fr om being accidentally changed. IMPORT ANT: Three conditions must be met to enable V -Chip (see pages 79 to 83): 1 Secret No.
78 Useful adjustment settings Changing the secret number Allows you to change your current secr et number . Repeat steps 1 to 3 in Setting a secret number . • Secret number setting menu displays. 1 3 Press a / b to select “New Secr et No.”, and then press ENTER .
79 Useful adjustment settings P arental control (setting V -CHIP level) V -CHIP is an electronic filtering device built into your TV . This tool gives par ents a great degr ee of control over broadcasts accessed by their childr en. It allows parents to select pr ograms judged suitable for child viewing while blocking ones judged not suitable.
80 Useful adjustment settings V oluntary movie rating system (MP AA) Press MENU and the MENU screen displays. 1 2 Press c / d to select “Setup”. Input the 4-digit secret number by using 0 – 9 . 3 Press a / b to select “Par ental CTRL”, and then press ENTER .
81 Useful adjustment settings Canadian Rating Systems • The TV rating systems in Canada ar e based on the Canadian Radio-T elevision and T elecommunications Commission (CRTC) policy on violence in television pr ogramming.
82 Useful adjustment settings Canadian English ratings Press a / b to select “Can. English Ratings”, and then press ENTER . Press a / b to adjust the item to your desired position. “ ” indicates the item is blocked. • The setting automatically enters “Block” for any ratings below your selection.
83 Useful adjustment settings How to temporaril y release the V -CHIP BLOCK • The V -CHIP BLOCK is working and censors a broadcast, “V -CHIP HAS BEEN ACTIV A TED.” displays. Reactivating the temporaril y released V -CHIP BLOCK • Y ou can r eactivate the temporarily released V -CHIP BLOCK as shown below .
84 Useful adjustment settings Center Channel Input Y ou can use the display speakers as center speaker when using 5.1ch surr ounding sound system. 4 Press c / d to select “On” , and then press ENTER . Press MENU and the MENU screen displays. 1 2 Press c / d to select “Option”, and then pr ess ENTER .
85 Other vie wing options Viewing a list of Digital br oadcast channels Y ou can view a list of all curr ently watchable digital broadcast channels. Press CH LIST while watching a digital broadcast. • A list of all digital channels (Air or Cable) currently watchable will be displayed.
86 Other viewing options T win picture functions Allows you to display two pictur es on the screen at one time. T win picture in all cases Y ou can display two same-sized pictures except when inputting fr om INPUT 4 (HDMI) and INPUT 5 (DVI-I) terminals and CARD.
87 Other viewing options Presetting remote contr ol function Y ou can operate the connected A V products (A V Receiver , Cable Box, SA T tuner , DTV , VCR, DVD, LD) using the presetting manufactur er function for your remote contr ol unit. Presetting manufacturer codes Press FUNCTION until the LED for your device lights up.
88 Other viewing options Manufacturer codes Akai A udio Broksonic Canon Capehar t Craig Cur tis Mathis Daewoo DBX Dynatech Emerson Fisher Funai G.E. Goldstar Hitachi Instant Replay JC P enney JVC K en.
89 Other viewing options Cable contr ol buttons When the FUNCTION is set to CBL/SA T the cable converter connected to the Display can operate using 1 to 4 . 1 SOURCE PO WER T ur ns the cable converter power on and off. 20 – 9 Press a button (or buttons) that corr esponds to the channel that you wish to watch.
90 Other viewing options VCR control b uttons The remote contr ol unit button will function as follows when the FUNCTION of the remote contr ol unit is set to VCR. • When the input selector button having the same number as the input terminal connecting the VCR is pressed, the VCR can operate using 1 to 8 .
91 Other viewing options Notice ■ When you c hang e y our adress • If you change your address, please return the CableCARD to your Cable Provider Company .
92 Appendix • No power • Unit cannot be operated. • Remote control unit does not operate. • Picture is cut off/with sidebar screen. • When playing back video in card mode, a part of the image is missing or the image is out of position. • Strange color , light color , or color misalignment • Power is suddenly turned off.
93 Appendix PC compatibility c har t Apple and Macintosh ar e registered trademarks of Apple Computer , Inc. DDC is a register ed trademark of Video Electronics Standards Association. Power Management is a register ed trademark of Sun Microsystems, Inc.
94 RS-232C port specifications Return code Command 4-digits Parameter 4-digits PC Control of the TV • When a program is set, the Display can be contr olled from the PC using the RS-232C terminal.
95 Command table • Commands not indicated here ar e not guaranteed to operate. CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS POWER SETTING It shifts to standby. It input-switches by the toggle. (It is the same as an input change key) It input-switches to TV.
96 Appendix Item Model: LC-37GD6U TV Function American TV Standard A TSC/NTSC System VHF/UHF VHF 2-13ch, UHF 14-69ch CA TV 1-125ch Audio multiplex BTSC System T erminals A V in, COMPONENT in INPUT 2 A.
97 Dimensional dra wings Unit: inch/(mm) Display LC-37GD6U 917 707 548 645 434 434 822.6 463.8 200 200 95.9 99 677 102 307 115.
98 99 677 102 700.4 395.1 795 638 480 576 307 115 400 200 61.5 200 400 Dimensional dra wings Unit: inch/(mm) Display LC-32GD6U.
99 Dimensional dra wings Unit: inch/(mm) Display LC-26GD6U 279 95 519 568 321 663 206 556 201 504 52 69 100 100 151.
100 HO W T O SET THE F A CT OR Y PRESETS Check that the power indicator is not on. Remove the AC cor d and switch off the power . Pr ess and hold down RESET at the same time as you re-insert the AC Cord into the outlet and switch on the TV . All setting items (except TV channel) return to the factory presetting.
101 CONSUMER LIMITED W ARRANTY SHARP ELECTRONICS CORPORA TION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when shipped in its original container , will .
102 LIMITED W ARRANTY Consumer Electronics Products Congratulations on your purchase! Sharp Electronics of Canada Ltd. (hereinafter called “Sharp”) gives the following express warranty to the firs.
SHARP ELECTRONICS CORPORA TION Sharp Plaza, Mahwah, New Jersey 07430-2135 SHARP CORPORA TION Printed on 100% post-consumer recycled paper . Imprimé sur 100% de papier recyclé.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Sharp LC 32GD6U c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Sharp LC 32GD6U - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Sharp LC 32GD6U, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Sharp LC 32GD6U va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Sharp LC 32GD6U, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Sharp LC 32GD6U.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Sharp LC 32GD6U. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Sharp LC 32GD6U ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
