Manuel d'utilisation / d'entretien du produit VHR-H530 du fabricant Sanyo
Aller à la page of 40
INSTRUCTION MANUAL VHR-H530 Vi deo Casset te Recor der English Magn ét o sc o p e à ca ss et te Français Vi deogra bador Espa ñol Only cass ettes marked w can be used with this video cassette recorder .
PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMO VE COVER (OR BACK). NO USER-SERVICEABLE PART S INSIDE.
FEA TURES TIMER/CLOCK œ Selec tabl e stan dard/d ayli ght saving time œ 1-year /8-eve nt pro gram ti mer wi th d aily/w eekly set tings œ Smart Speed Record functi on œ Remain ing tape duratio n d.
VHS VIDEO CASS ETTE T A PE S Record/Play Times Tape Leng th T-60 T-12 0 T-16 0 Tape Speed SP Mode 1 hour (60 minutes) 2 hours (120 minutes) 2- 2 ⁄ 3 hours (160 minutes) highest video quality LP Mode.
LOCA TI ONS OF CO NTROLS AND INDI CA TORS Front Panel Reference pages are shown in square brackets . 1 Cassette loading sl ot 2 STOP/EJECT button [3, 21] 3 FF (fast forward) button [29] This button is used both for fast forward and forward picture search.
LOCA TIONS OF CONTROLS AND INDICA TORS Back Panel 1 AC power input 2 Rear-panel AUDIO/VIDE O input jacks Connect the audio and video outputs from an external unit (i.
REMOTE CONTROL Locations of Controls Reference pages are shown in square brackets . 1 Number buttons (0 – 9) [13, 18] 2 100 button [13] 3 MENU button [15] 4 PAUSE/ST ILL • û button [15, 23, 29] 5.
REMOTE CONTROL Battery Installation and Operation 1 Install the two suppl ied AA batteries as shown. 2 Aim the remote control at the V CR and press the desired buttons to operate. IMPORTANT NOTE: SPENT OR DISCHARGED BATTERIES MUST BE RECYCLED OR DISPOSED OF IN A SAFE MANNER IN COMPLIANCE WITH ALL APPLICABLE LAWS.
BASIC ANTENNA/CABLE CONNECTIONS 1 Connect an antenna (or a cable TV system) to the VCR. 2 Connect the VCR to the TV with the 75 ohm coaxi al cable (supplied). 3 Plug the power cord (supplied) into the A C power input (AC IN ~) on the VCR back panel. Insert the plug firmly.
AL TERNA TIVE CABLE TV CONNECTIONS Your VCR can recei ve all unscr ambled cable channels without the use of an external conv erter. If you wish to view and record sc rambled cable channel s, you must connect a converter/decoder as described below. Your local cable TV c ompany will advi se you of the channels avail able in your area.
AL TERNA TIVE CABLE TV CONNECTIONS Cable converter/decoder output channel setup 1 Be sure the cable connecti ons are correct. (See page 9.) 2 Turn on the TV, VCR and cable converter/dec oder. 3 Set the TV to channel 3 or 4. 4 If the VCR indicator is off, press the TV/ VCR button on the remote control.
AUDIO/VIDEO CONNECTIONS Stereo Connections Connecting your VCR to your stereo TV through audio/video jac ks usually provides better picture and sound quality.
INITIAL SETUP When you are setting up the VCR for the first time, or after the power has failed for more than 5 seconds, foll ow the steps below. This AUTO S ETUP operation automatically sets the RF output channel , enters all available channel s in your area into the VCR tuner memory and sets the VCR internal cl ock.
INITIAL SETUP To modify the RF output channel setting after the Auto setup is completed 1 With the VCR turned off, press the SET button for about 3 seconds or more. The current RF output channel setting indic ator will flash on the front panel and will appear on-s creen.
MUL TIFUNCTION ON-SCREEN DISPLA YS Various display s appear, superimposed over the sc reen image, indicating the operation mode and featur es in use. Operation Mode Display When an operation button is pressed, the cor responding operation mode icon is dis played in the top left corner of the screen for about 3 seconds.
ON-SCREEN MENU Your new VCR is desi gned with user-friendly on-screen menus to help you operate its many features. Color-coded menus prompt you step-by- step through operations by highli ghting the sections awai ting your entries. Displaying the On-Screen Menus 1 Turn on the power (TV and VCR).
ON-SCREEN MENU Displaying the VCR Setup Menus œ Turn on the power (TV and VCR). œ Set the TV to channel 3 or 4. œ If the VCR indicator is off, press the TV/ VCR button on the remote control. The VCR indicator lights. 1 Press the MENU button on the remote contr ol.
SETTING THE CLOCK Generally, during the ini tial setup, your VCR wil l automatically set the c lock by detecting a channel that is transmitting the XD S (Extended Data Services ) signal. However, if the XDS si gnal necessary for Automatic Clock Setti ng was poor or unavailable at the time, Automatic Cloc k Setting may not have been pos sible.
SETTING THE CLOCK Manual Clock Setting 1 Follow the steps in Before starting . 2 Press the MENU button. The main MENU appears. If the clock has not y et been set, the Clock set menu appears. 3 Press the ù (or û ) button to select the Clock s et option, then press the OK button.
CHANGING THE MENU LANGUAGE English, Spanis h or French can be selected by the user. œ Turn on the power (TV and VCR). œ Set the TV to channel 3 or 4. œ If the VCR indicator is off, press the TV/VCR button on the remote control. The VCR indicator li ghts.
VIEWING TV ONL Y You do not need to disconnect the V CR from the TV in order to watch a TV program without recording it. 1 Turn off the VCR. 2 Turn on the TV and set it to the channel you want to watch. PLA YING A RENT AL T APE When you load a cassette with the s afety tab removed, the VCR starts playing i t automatically.
NORMAL PLA YBACK œ Turn on the power (TV and VCR). œ Set the TV to channel 3 or 4. œ Load a cassette. œ Select the desi red audio output mode. (See “AUDIO OUTPUT MODE” on page 28.) 1 Press the PLAY button. Normal playbac k begins. The tape stops and rewinds when the end of the tape is reached.
TRACKING CONTROL Tracking Control Adjustments When you play a tape that was not recor ded on this VCR, some noise may appear in the pic ture due to incorrect head-to-tape tracking. The VCR will automatically adjust the tracking for the optimum results.
RECORDING œ Turn on the power (TV and VCR). œ Set the TV to channel 3 or 4. œ If the VCR indicator is off, press the TV/VCR button on the remote control. The VCR indicator li ghts. œ Press the INP UT button on the remote control to select the tuner mode.
RECORDING Smart Speed Record Function When the Smart Speed Record functi on is set, the VCR automatically calc ulates the remaining time left on the tape during recording.
Rec. List SUPER Rec. List (Recording Contents List) Super Every time a recordi ng is made with this VCR, the channel number, date and start time i nformation is automatically recorded on the tape. W hen you call up the Rec. List super menu, the VCR s cans the information on the tape and displays it on screen.
Rec. List S U PE R Entering the Program Type To have the program type included in the Rec . List super menu, you must enter the program type before proceeding to step 1 of “RECORDING” on page 23. œ The clock must be set before the program type c an be sele cted.
VHS Hi-Fi AUDIO AND MTS BROADCASTS VHS Hi-Fi V CRs record and play back two kinds of audio tracks: Hi-Fi s tereo tracks (left and right) and a normal (linear) audio track . œ The Hi-Fi tracks contain two separate signals (for example, the left and right channels of a stereo program or the main and second SAP* s ignals).
AUDIO OUTPUT MODE Use the VCR setup menu to selec t the desired audio output mode when playing a tape or viewing a tel evision broadcast. NOTE: Audio output mode selection i s not required when playing back a tape re corded in mono or viewing a mono TV program.
SPECIAL PLA YBACK Picture Search (Forward and Reverse) 1 Press the FF or REW button duri ng normal playback. The picture plays forward or bac kward rapidly. 2 Press the PLAY button to resume normal playback. FR (Fast Response) Search 1 Press the FF button (in fast forward mode) or the REW button (in rewind mode).
ZERO SEARCH Use the zero search function to go back to the beginning of a program immediately after you have recor ded it. 1 Press the DISP LAY button. The status displ ay appears. 2 Press the RES ET button. The tape counter resets to 0:00:00. 3 Begin playback or recording.
PROGRAM TIMER RECORDING The Program Timer switches your VCR on and off to record a TV program at a preset time. On any oc casion, you can preset a maximum of 8 pr ograms to be recorded during the next 1-year period.
PROGRAM TIMER RECORDING Setting a Program Timer Recording Using the Buttons on the VCR If the remote control does not operate or is not avail able you can use the buttons on the VCR front panel to s et a program timer recording. NOTE: Eject the cassette tape, before proceeding wi th the steps below.
PROGRAM TIMER RECORDING Using Timer Recording for Several Programs If two or more programmed recording times ov erlap on the same day, the VCR wil l not begin recording a new program until the previous pr ogram has ended (as shown below).
QUICK TIMER RECORDING (QTR) As the name suggests, the QTR feature provides a quick and simple way to set the ti mer to record. A QTR setting overrides Program Timer settings .
CHILD LOCK With the Child Lock func tion on, the picture is blank ed and the sound muted, virtually blocking the ability to view a videotape or TV program received through the V CR tuner. 1 Press the ME NU button. The main MENU appears. 2 Press the ù (or û ) button to select the VCR setup option, then press the OK button.
COPYING A T APE You can copy recordings ( such as home videos) from one tape to another using two VCRs. 1 Connect the VCRs as shown. 2 Insert the recorded cassette into V CR 1. 3 Insert a blank tape into VCR 2. 4 Set the desired recording speed on V CR 2.
TROUBLESHOOTING GUIDE If you have followed the instr uctions in this manual and s till have diffi culty operating your V CR, check the steps below before getting help from a factory-authoriz ed service center. SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION No power.
SPECIFICA TIONS General Specifica tions Televisi on system NTSC standard system Recording system Rotary helical sc an system Number of heads 4, Double azimuth video 2, Audio FM Format VHS standard Tape width 1/2 inch Tape speed SP : 33.35 mm/s ec. (1.
SC4HW/NA (VHR-H530 GB ) Fri. Jan., 07/2000.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Sanyo VHR-H530 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Sanyo VHR-H530 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Sanyo VHR-H530, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Sanyo VHR-H530 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Sanyo VHR-H530, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Sanyo VHR-H530.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Sanyo VHR-H530. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Sanyo VHR-H530 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
