Manuel d'utilisation / d'entretien du produit POA-PN02 du fabricant Sanyo
Aller à la page of 114
OWNER’S MANUAL This PJ-Net Organizer is an optional network product for the projector. Mount this product to the projector and connect a network cable. It enables a projector to display the image data stored in the file server and the screen image of the computer via the network.
2 Federal Communication Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
3 Network Unit OWNER’S MANUAL ENGLISH Chapter 1 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Operating Environment .
4 Load an image mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 Sound . . . . . . . . . . . . . . . . . . . .
Chapter 1 Pr eparation 5 Network Unit OWNER’S MANUAL ENGLISH 1.
6 Chapter 1 Preparation Featur es Network Capture function It enables a projector to project the screen image of the computer on the screen via the network by using an exclusive utility software . Internet Intranet PC2 PC4 PC3 PC5 PJ2 PJ1 PC1 Capture Project a screen image of PC1 with PJ2.
7 Network Unit OWNER’S MANUAL ENGLISH We b Management function With this function, you can monitor projector functions such as power status, lamp status, input mode, signal condition, lamp-use time, etc. through the network by using the web browser installed on your computer.
8 Chapter 1 Preparation Multi-control function A single computer can control and set up the multiple computers at the same time. Automatic On/Off using Clock function Automatically turn on or off the projectors at specified date/day and time by using the clock function.
9 Network Unit OWNER’S MANUAL ENGLISH Operating Environment Operating Envir onment To perform the managing and setting of the projector by using this product, the envi- ronment described below is required. Network Network must handle Ethernet correctly and accept TCP/IP and FTP protocol.
10 Chapter 1 Preparation The limitation *1 of connection between this product and Hub or Computer Suitable LAN cables are limited by length and type as follows; Connection Type of usable LAN cable Max.
11 Network Unit OWNER’S MANUAL ENGLISH T rademarks Ethernet is a registered trademark of Xerox Corporation. Microsoft, Windows, Windows NT are registered trademarks of Microsoft Corporation. Internet Explorer is a registered trademark of Microsoft Corporati on.
12 Chapter 1 Preparation Softwar e License Agreement Before using Network Viewer & Capture Software CD-ROM, thoroughly read the following software license agreement to fully understand its contents. Use this CD-ROM only when you agree to the terms of this agreement.
Chapter 2 Installation 13 Network Unit OWNER’S MANUAL ENGLISH 2.
14 Chapter 2 Installation The following are instructions for attaching this product to the projector and connect- ing it to the network. Please review the entire procedure to become familiar with it. Function of the Network Unit ( ☞ p.15) 1 Installation and network configuration ( ☞ p.
15 Network Unit OWNER’S MANUAL ENGLISH Name and function of each part z Name and function of each part Serial port This is used when controlling the external equipment via the network. ( ☞ p.85) Power indicator This lights up red when the net- work function is set ON in the projector menu.
16 Chapter 2 Installation x Installation and Network configuration Mounting ✐ The AC cord must be disconnected when mounting or removing this product otherwise it may damage the product. ✐ Do not connect the AC cord until after connecting the LAN cable and computer.
17 Network Unit OWNER’S MANUAL ENGLISH Connection of LAN cable Connection of LAN cable To connect to the network, it is required to use the UTP (Unshielded Twisted Pair) strait cable with RJ-45 plug. There are two different types of cables depending on whether the network is constructed with 10Base-T or 100Base-TX.
18 Chapter 2 Installation Network configuration Confirmation of the network menu When installing this product to the projector, the network on-screen menu items for this product are activated automatically. If not activated, the product may not have been installed correctly.
19 Network Unit OWNER’S MANUAL ENGLISH Network configuration 2 Configuration for IP Address/ Sub net/ Gateway*/DNS* Press SELECT button again, the following network setting menu appears on the screen.
20 Chapter 2 Installation ✐ Password setting must be done when you connect the projector to the network. This setting is carried out through the projector’s menu and also it can be set through the network using the web browser. For further information please refer to item “Initial Setting/Password set- ting” ( ☞ p.
21 Network Unit OWNER’S MANUAL ENGLISH Network configuration How to enter the numbers with the screen 10-key pallet 1. Select a column with a red frame by using the point buttons 7 8 . 2. Press SELECT button. The screen 10-key pallet appears on the screen.
22 Chapter 2 Installation c Installing the softwar e It is required to install the software into your computer to use the Network Capture function and Network Viewer function.
23 Network Unit OWNER’S MANUAL ENGLISH Installed software The following 3 software are installed on your computer. ● Network Capture: Capture the displayed image of the computer and serve it to the projector via the network.
24 Chapter 2 Installation File Converter 2 Installation 1 Set the supplied Network Viewer & Capture CD-ROM into the CD-ROM drive of your computer. Double click SetupDrv.
3 25 Network Unit OWNER’S MANUAL ENGLISH Chapter 3 Basic Setting and Operation.
26 Chapter 3 Basic Setting and Operation This chapter describes basic operations and settings for controlling the projector via a network using this product. It is required that computer and projector be connected to the network and the network address be properly configured.
27 Network Unit OWNER’S MANUAL ENGLISH Login the setting page of the projector 3 Display of main setting page The following main setting page will be displayed according to your display mode selection. Perform the various kinds of setting through this page.
28 Chapter 3 Basic Setting and Operation Returns to the display mode selection page. x Main setting page in the Text Mode display Main menu For selection of control and setting items of the projector. Displays sub menu and status of selected items when clicking the linked text.
29 Network Unit OWNER’S MANUAL ENGLISH Initial Settings Initial Settings After installing this product to the projector, perform the following basic ini- tial setting. Click Initial Setting on the main menu to display the initial setting page. The Languages, Date/Time, Password and Temperature unit can be set in this page.
30 Chapter 3 Basic Setting and Operation 2 Password Setting This page is to set the password to restrict the access from an unauthorized per- son through the network. Enter the password onto the text box and click Set button. The Network Unit begins restarting and it takes about 40 seconds.
31 Network Unit OWNER’S MANUAL ENGLISH 4 Date/T ime Setting Click on the page number “2” to display the Time Setting page. Type present date onto the date text area with (Year/Month/Date) format and type present time onto the time text area with (Hour:Minute) format in 24 hours indication.
32 Chapter 3 Basic Setting and Operation Network Configuration Click Network on the main menu. The following setting page is displayed. This page is to set the IP Address, Subnet Mask, Default Gateway, DNS (Domain Name Server) and projector name.
33 Network Unit OWNER’S MANUAL ENGLISH E-mail Setting This product has an E-mail function which can send an alert message to users or an administrator if it detects an abnormality on the projector or run out of the life span of the lamp. Click E-Mail Setting on the main menu and follow the below steps.
34 Chapter 3 Basic Setting and Operation 3 Option selection for sending alert message Click on the Option linked text. Check the condition items under which alert mes- sages will be sent and click Set button. Please refer to item “Examples :Type and contents of alert messages” described on the next page.
35 Network Unit OWNER’S MANUAL ENGLISH 4 Condition selection for sending alert message Check the condition items under which alert messages will be sent and click Set button. A free message can be sent when the lamp use time reach- es the preselected lamp use time.
36 Chapter 3 Basic Setting and Operation ● When the internal power circuit is failed: ● When the life span of lamp is reached: ✐ Replace it with a new lamp immediately and reset the lamp counter. If the projector is used without reset the lamp counter, the alert mail is sent to users in every power- on of the projector.
Chapter 4 Contr olling the Projector 4 37 Network Unit OWNER’S MANUAL ENGLISH.
38 Chapter 4 Controlling the Projector ✐ The projector is not turned on for about 90 seconds after switching into the standby mode. After the power status indicator on the control page changes from “On Cooling down” to “OFF”, then try to turn on the projector with On button.
39 Network Unit OWNER’S MANUAL ENGLISH The icons [A], [B] and [C] represent the sensors located in the projector as follows: [A]: Surrounding temperature of the projector*. [B]: Surrounding temperature of the lamp. [C]: Surrounding temperature of the panel.
40 Chapter 4 Controlling the Projector Contr ol the pr ojector The sub control menu appears on the lower side of the page when clicking Control on the main menu. When you click each control icon, the control page is displayed according to the control menu you selected.
41 Network Unit OWNER’S MANUAL ENGLISH Select a source mode with pull-down menu. Select a input mode with radio buttons. Input This function is to select the input mode and source mode of the projector. Select the input mode with the radio button, and input source mode with the pull-down menu button.
42 Chapter 4 Controlling the Projector PC Adjustment This function is to adjust the signal from the computer connected to the projector to obtain the proper picture image on the screen. Click on the page number linked texts to change the setting pages.
43 Network Unit OWNER’S MANUAL ENGLISH Save a Set 1 Decide your desired PC adjustment val- ues through the PC Adjustment pages “1”to “2”. 2 Display the page “3” and select a mode number with the pull-down menu button of the Save to . Type a memo into the Memo text area for simply description of your selected number.
44 Chapter 4 Controlling the Projector System Adjustment This function is to select the color system of video signal or scanning sys- tem of component signal input to the projector. Select a system with the radio buttons to match the color system or scanning system of input source, and then click Set button.
45 Network Unit OWNER’S MANUAL ENGLISH Image Adjustment This function is to adjust the projected picture image and set the image mode. For selection of image mode, select a desired image mode with the Image pull-down menu button and then click Set button.
46 Chapter 4 Controlling the Projector Save an image adjustment value 1 Decide your desired image adjustment value through the image adjustment pages “1” to “3”. 2 Display the page “3” and select the desired image number with the pull- down menu of the Save Adjustment .
47 Network Unit OWNER’S MANUAL ENGLISH Screen This function is to adjust the screen mode of the projector. The setting items are switched automatically according to selected input mode, com- puter or video input. Sound This function is to adjust the sound of the projector.
48 Chapter 4 Controlling the Projector Setting This function is to set up the projector. Click on the page number “1” to “6” linked texts to change the setting pages. Item Description Language ..........Changes the on-screen menu language of the projector.
49 Network Unit OWNER’S MANUAL ENGLISH Item Description Remote Control ...... Sets one of 8 types remote control codes. Lamp Counter Reset ................Resets the lamp use-time. Reset when replaced lamp. Factory Default ......Sets all of the control items to the factory shipping set.
50 Chapter 4 Controlling the Projector Item Description Actual Time ........Displays the current time set to the projector. Timer Setting ....Function to switch on or off the projector at the programmed date and time. Please see item “How to set the Timer” for fur- ther instructions.
51 Network Unit OWNER’S MANUAL ENGLISH 2 Set a time Type the time with (Hour:Minute) and 24 hours format. Ex.: Type [18:25] if you specify [PM 6 o’clock and 25 minutes]. 3 Select an event “ON” or “OFF”. Select an event ON or OFF with the pull-down menu button to turn on or off the projector.
52 Chapter 4 Controlling the Projector ✐ The timer operates by using the clock function provided in this product. Before setting the timer, please confirm that the current date and time are set correctly. Timer and clock func- tions are functioning using a lithium battery provided in this product.
53 Network Unit OWNER’S MANUAL ENGLISH Service This function sets the cooling fan speed of the projector. Set proper fan speed depending on the installation environment. Select “Normal” or “Maximum” with the pull-down menu button and click Set button.
54 Chapter 4 Controlling the Projector Save Actual Adjustment This function is to save and load the control values of the projector. The storable control items are Input, PC, System, Image and Screen controls, and these control items differ from each selected input mode and functions of the projector you use.
55 Network Unit OWNER’S MANUAL ENGLISH Check the Save items Browse pages by clicking on the page numbers and check each setting status. The pages for the saving items are constructed by 8 pages. The contents of the pages may differ from the actual depending on the selected input mode and the function of the projector.
56 Chapter 4 Controlling the Projector Load a control set Select your desired set number with the pull-down menu button of the Load Setting No. and then click Set button. The setting values of the selected set number are applied to the current settings.
57 Network Unit OWNER’S MANUAL ENGLISH Control the projector’s menu Contr ol the pr ojector's menu Click Menu on the main menu. The following menu control page is dis- played. This page is to control the on-screen display menu of the projector.
58 Chapter 4 Controlling the Projector Make a memo Select the Memo setting page by clicking Memo on the main menu. The following setting page is displayed. It is convenient to use as a memo for the simple description where the projector is placed in. This note will be displayed on the login page.
Chapter 5 Network V iewer & Captur e 5 59 Network Unit OWNER’S MANUAL ENGLISH.
60 Chapter 5 Network Viewer & Capture Using the Network Captur e function The Network Capture is a function to project the screen images of the computer by the projector via the network by using the Network Viewer software.
61 Network Unit OWNER’S MANUAL ENGLISH Network Capture [1] Control by the computer * Start capturing from the computer. Select input mode to the “Network” previously. 1 Click Network Capture icon on the task bar. 2 Click “Start” on the popup menu.
62 Chapter 5 Network Viewer & Capture [2] Control by the web browser * Start capturing of the PC1 from the PC5. Select input mode to the “Network” previously. 1 Access to the control page on the projector by using the web browser. From the main menu, click Network Capture to display the setting page ( ☞ p.
63 Network Unit OWNER’S MANUAL ENGLISH Registering the computers Up to 10 computers can be registered. To register a computer, on the Network Capture setting page, click the page num- ber “2” or “3” linked text to change to “Connection Setting” page and enter the IP address of the computer to the PC number, and then click Set button.
64 Chapter 5 Network Viewer & Capture Advanced using example Displays the presentation data stored in the computer by using the wireless mouse function from the projector. 1 Start capturing of the computer PC1 by using the projector. Select “Network Capture” icon from the menu and select “PC1” and then select “Connect” ( ☞ p.
65 Network Unit OWNER’S MANUAL ENGLISH Cr eate the available data [File Converter] The image available with this projector is the JPEG format. There are several types of JPEG data. Before using the images with the Network Viewer function, it should be converted to the optimized JPEG data for this projector.
66 Chapter 5 Network Viewer & Capture Converting procedur e 1 Select a folder in which the image files are stored by the explorer window. The preview images of the available image data (JPEG file, BMP file) in the select- ed folder are displayed on the preview window.
67 Network Unit OWNER’S MANUAL ENGLISH Setting of conversion mode When clicking Change button on the confirmation window in the step 3 on the previ- ous page, following option setting window appears. Conversion type: Fit ......................Converts as either width or height of the image sets to be the maximum screen width or height.
68 Chapter 5 Network Viewer & Capture [2] How to use the Network V iewer (File Converter 2) The File Converter 2 is a kind of the printer driver software to convert to the opti- mized JPEG data for the projection from the any documents created by the other software such as text editor, spreadsheet or presentation software.
69 Network Unit OWNER’S MANUAL ENGLISH Making a pr ogram file [Pr ogram Editor] Network Viewer (Program Editor) is a tool to make a program file specify the stored information of the JPEG images in the file server (ftp server) and the order of the dis- play images.
70 Chapter 5 Network Viewer & Capture The setting window disappears and then the programs are listed on the window if there are program files at the login directory in the connected ftp server. 4 Click New button. 5 Enter a program name and click Add button.
71 Network Unit OWNER’S MANUAL ENGLISH Use the web browser to access to the control page of the projector. Click Network Viewer on the main menu on the web page, then connect to the file server and select the program name which was made at previous section.
72 Chapter 5 Network Viewer & Capture Internet Intranet PC2 PC4 PC3 PC5 PJ2 PJ1 PC1 JPEG Prog. JPEG Project JPEG images stored in PC3 with PJ2. * ftp file servers Using the Network V iewer function The Network Viewer is a function to acquire and project the JPEG image data on the screen from the file servers placed in the network.
73 Network Unit OWNER’S MANUAL ENGLISH Network Viewer Select input mode to “Network” previously. 1 Access to the control page on the projector by using the web browser. From the main menu, click Network Viewer to display the setting page. 2 Setup the setting page [1] of the Visual Display.
74 Chapter 5 Network Viewer & Capture 5 Auto Display setting and control page [3] Auto Control ....Displays period (3 to 240 sec.), Repeating times (1 to 999 times) * 0 times represents endless dis- play The display status is indicated on the text area.
75 Network Unit OWNER’S MANUAL ENGLISH Network Viewer 6 Program New Registration [4] 1. Click on “New Registration” linked text. 2. Enter a program name and click Select button. 3. On the Folder Selection window, click a folder and click Add button.
76 Chapter 5 Network Viewer & Capture 7 Program Confirmation & Change [4] 1. Click on “Confirmation & Change” linked text. 2. From “Program Name” pull-down menu button, select the program name you want to confirm or change. * Click Delete button to delete.
77 Network Unit OWNER’S MANUAL ENGLISH Network Viewer [2] Control by the projector Select input mode to “Network” previously. 1 Display the menu bar on the projected screen by pressing the MENU button on the projector or the remote control handset.
78 Chapter 5 Network Viewer & Capture.
Chapter 6 Contr olling the Multi-Projectors 79 Network Unit OWNER’S MANUAL ENGLISH 6.
80 Chapter 6 Controlling the Multi-Projectors Multi-Contr ol This function enables to control the multiple projectors equipped with the Network Units that are connected to the network at the same time. Click Multi Control on the main menu to display the control page.
81 Network Unit OWNER’S MANUAL ENGLISH *1 Normally, the projector in the network is recognized with the IP address. This product allows you to name the projector instead of the IP address. By registering the projector’s nickname like “MeetingRoom101”, it can be managed and recognized easily.
82 Chapter 6 Controlling the Multi-Projectors Exclude/Add/Delete a projector To change the mode of the registered pro- jectors, select a mode with the pull-down menu button under the IP address of the target projector and then click Set button.
83 Network Unit OWNER’S MANUAL ENGLISH Load and apply the setting value The control sets saved for each projector ( ☞ p.54) can be used while the multi-con- trolled projectors function is being used. Select a setting number from the item Load Setting No.
84 Chapter 6 Controlling the Multi-Projectors Contr ol multi-pr ojectors at the same time The valid controls are shown below. Please refer to item “Control the Projector” ( ☞ p.
Chapter 7 Use of Serial Port 85 Network Unit OWNER’S MANUAL ENGLISH 7.
86 Chapter 7 Use of Serial Port This product provides a serial control port (RS-232C) to control the external equipment which has an RC-232C port. This function allows external equip- ment to be controlled by the computer through the network and the projec- tor can be controlled by the external serial controller.
87 Network Unit OWNER’S MANUAL ENGLISH *1 This product will restart automatically when “Port” or “Serial Control” is changed and it takes about 40 seconds. *2 The reserved port numbers are http (80), ftp (21), telnet (23), etc. The port no. 10000 is reserved to control the projector through the LAN port.
88 Chapter 7 Use of Serial Port Example 2 Controlling a projector which is not on the network function through network. Contr ol Examples Example 1 Controlling AV equipment through network Internet Intranet PC2 PC4 PC3 PC5 PJ2 PJ1 PC1 D VD Player Tu rn on the D VD play er and start playing.
89 Network Unit OWNER’S MANUAL ENGLISH Control Examples Example 3 Controlling the projector with the serial controller through the serial port (RS-232C). ✐ Use proper serial cable depending on the connected equipment port specification. Please refer to “Port Specification” of the serial port specification of this product ( ☞ p.
90 Chapter 7 Use of Serial Port Use of T elnet You can control the equipment connected to the serial port on the network unit and the projector itself by using the telnet application* 1 installed on your computer. The following is a control example of external equipment.
91 Network Unit OWNER’S MANUAL ENGLISH Use of telnet 3 When communication is established, the word “PASSWORD:” appears on the window. Type the login password* for the projector and then press “Enter” key on the keyboard. If you do not register the login password, just press “Enter” key.
92 Chapter 7 Use of Serial Port Control the pr ojector with T elnet This product allows you to control the projector by using the Telnet application. Normally, it is used for controlling the external equipment connected to the serial port and also control the projector itself by specifying the telnet port no.
Chapter 8 Appendix:A 93 Network Unit OWNER’S MANUAL ENGLISH 8 Connection examples Web browser setting Technical data.
94 Chapter 8 Appendix Examples of Connection Peer-T o-Peer connection Connecting the projector (PJ01) to the control computer (PC05) directly Projector Name: PJ01 IP Address : 192.168.0.2 Subnet Mask : 255.255.255.0 Default Gate way : 0.0.0.0 DNS : 0.
95 Network Unit OWNER’S MANUAL ENGLISH Examples of connection The gateway (Router) installed in the network Connecting the projector (PJ01) to the control computer (PC05) via the gateway. To another network Network Group: 192.168.200.0 Network Group: 192.
96 Chapter 8 Appendix W eb br owser setting This product is designed to enable the projector to be set up and controlled from an Internet web browser. Depending on the preference settings of the web browser, some control functions may not be available.
97 Network Unit OWNER’S MANUAL ENGLISH Examples: OS/Br owsers W indows XP Professional Internet Explorer v.6.0 ActiveScript setting Select the I nternet Options menu from the Tool menu on the web browser and then select Security tab and click Customize Level… button.
98 Chapter 8 Appendix Proxy setting Select the Internet Options menu from the Tool menu on the web browser and then select Connection tab and click LAN Settings button. Properly set up your web browser's the proxy server settings according to the local area network environment to which the projector is connected.
Netscape Navigator v.7.0 JavaScript Setting Select the Preference menu from the Edit menu on the web browser and then select the item Advanced/Scripts & Plugins in the Category column. Make sure that the Enable JavaScript for Navigator is checked.
100 Chapter 8 Appendix Proxy setting Select the Preference menu from the Edit menu on the web browser and then select the item Advanced/Proxies in the Category column. Properly set up your web brows- er's the proxy server settings according to the local area network environment to which the projector is connected.
101 Network Unit OWNER’S MANUAL ENGLISH Specifications Pr oduct specification Type ......................................PJ-Net Organizer (Network Unit) LAN interface .
102 Chapter 8 Appendix LAN port specification Port Specification Serial port specification pin No. Signal Function 1 TX+ Transfer data (+) 2 TX- Transfer data (-) 3 RD+ Receive data (+) 4 (not used) 5 (not used) 6 RD- Receive data (-) 7 (not used) 8 (not used) 12 3 4 567 8 8-pin modular connector (RJ-45) Pin No.
Appendix:B FA Q 103 Network Unit OWNER’S MANUAL ENGLISH.
104 Chapter 8 Appendix FA Q Why doesn’t the setting page appear in my web browser? F ollowing causes are possible. Please check them. 1. The projector does not connect to the network. Check LED indicators status ( ☞ p.15). - Check the connection of LAN cable if the LINK indicator does not illuminate orange.
105 Network Unit OWNER’S MANUAL ENGLISH 3. Enter the projector’s IP address [192.168.0.2] at “Address” column on the Web browser. [Note] Make sure that the proxy setting of your web browser is set “Not use a proxy server” ( ☞ p.96). 4. If the login page appears, this product is operating properly.
106 Chapter 8 Appendix How can I install several projectors equipped with the Network Unit? Install and configure network one by one to avoid the IP address collision each other ( ☞ p.21). To configure the IP address please see item “Network configuration” ( ☞ p.
107 Network Unit OWNER’S MANUAL ENGLISH Why can't I change the controls in the setting page with web browser? Please make sure the projector is turned on. If it is in the standby mode, the setting is not effective to the projector. To control the projector with a web browser, the projector must be in the powered-on condition.
108 Chapter 8 Appendix Why am I not receiving E-mail alert messages? Make sure that the registered E-mail address and SMTP server address are cor- rect. If the SMTP server is located in your LAN (Local Area network), the address should be set to the SMTP server in your LAN.
109 Network Unit OWNER’S MANUAL ENGLISH Can I update the firmware of the Network Unit. It is possible to update the firmware through the network. It is required to have a special tool for the updat- ing. For further information please consult your local dealer.
110 Chapter 8 Appendix What are the rules for IP address assignment? If the network is constructed with TCP/IP protocol, a unique IP address is required for each piece of network equipment. The following are basic rules of the assignment. Rule1 Do not configure the same IP address to the network equipment in the same network group.
111 Network Unit OWNER’S MANUAL ENGLISH Images from the file server don’t appear on the screen? 1. Make sure that the input mode of the projector is “Network”. 2. Check the account setting of the file server ( ☞ p.72). 3. The files in the file server must be optimized JPEG files and converted by using the File Converter 1.
112 Chapter 8 Appendix What kind of image formats can I convert? The File Converter 1 enables to convert to the JPEG format from the following image format. Bitmap format (.bmp) JPEG format (.jpeg .jpg) A Q File Converter 1 Sometime I have the white frame images converted by the File Converter 2.
113 Network Unit OWNER’S MANUAL ENGLISH FAQ.
Printed in Japan 1AA6P1P3994--b (IDJW) SANYO Electric Co. Ltd..
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Sanyo POA-PN02 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Sanyo POA-PN02 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Sanyo POA-PN02, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Sanyo POA-PN02 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Sanyo POA-PN02, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Sanyo POA-PN02.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Sanyo POA-PN02. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Sanyo POA-PN02 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
