Manuel d'utilisation / d'entretien du produit PLC-HP7000L du fabricant Sanyo
Aller à la page of 98
Projection lens is optional. Network Supported Refer to the Owner's Manual below for details about network function. □ Network Set-up and Operation Owner ’ s Manual Multimedia Projector M.
This Multimedia Projector is designed with most advanced technology for portability , durability , and ease of use. This projector utilizes built-in multimedia features, a palette of 1.07 billion colors, and matrix liquid crystal display (LCD) technology .
T able of Contents T rademarks Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. 3 Features and Design ............ 2 T able of Contents ............... 3 T o The Owner ..
Safety Precaution W ARNING: ● THIS APP ARA TUS MUST BE EARTHED. ● T O REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. – This projector produces intense light from the projection lens. Do not stare directly into the lens, otherwise eye damage could result.
All the safety and operating instructions should be read before the product is operated. Read all of the instructions mentioned here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners.
Openings in the cabinet are provided for ventilation. T o ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. CAUTION Hot air is exhausted from the exhaust vent. When using or installing the projector , the following precautions should be taken.
Use the projector properly in specified positions. Improper positioning may shorten the lamp life and result in severe accidents or fire hazard. This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the horizontal plane.
Safety Instructions 8 Moving the Projector Cautions in Handling the Projector Use the handle grip when moving the projector . Retract the adjustable feet to prevent damage to the lens and cabinet when carrying. When this projector is not in use for an extended period, put it into a suitable case to protect the projector .
AC Power Cord for the United Kingdom: This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an AST A approved BS 1362 fuse must be used of the same rating, marked thus A S A .
Part Names and Functions 10 Bottom Back ① Indicators ② T op Cover ③ T op Cover Release Button ④ Infrared Remote Receiver (Front) ⑤ Projection Lens (optional) ⑥ Light-Block .
Part Names and Functions Rear T erminal 11 ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑦ R/C JACK When using the wired remote control, connect the wired remote control to this jack with a remote control cable (not supplied) (p.
Part Names and Functions Side Control and Indicators 12 ① ON/ST AND-BY button T urn the projector on or off (pp. 23–24 ). ③ MENU button Open or close the On-Screen Menu (p.25). ④ Point ▲▼◄► buttons – Select an item or adjust the value in the On-Screen Menu (p.
① ST AND-BY button T urn the projector off (p.24). ③ ON button T urn the projector on (p.23). ⑫ INPUT button Select a signal (pp.32-34). ⑦ L-CLICK button Act as the left mouse button for wireless mouse operation (p.31). ② SIGNAL EMISSION indicator Light red while a signal is being sent from the remote control to the projector .
⑰ ZOOM buttons Zoom in and out the images (p.28). ㉕ D.ZOOM button Select the Digital zoom +/- mode and resize the image (p.44). ⑱ PIP button Operate the Picture in Picture function (pp.29, 57-58). ㉑ FIL TER button Scroll the filter (p.29). ⑮ FREEZE button Freeze the picture on the screen (p.
1 2 3 Open the battery compartment lid. Install new batteries into the compartment. Replace the compartment lid. T wo AAA size batteries For correct polarity (+ and –), be sure battery terminals are in contact with pins in the compartment.
Press and hold the MENU and a number button (1–8) for more than five seconds to switch among the codes. Press and hold the MENU and a number button (1-8) that corresponds to the remote control code for more than five seconds to switch among the codes.
Installation 17 When replacing the lens or using an optional lens, install the lens by following the instructions below . Ask the sales dealer for detailed information of the optional lens specifications. Shift the lens to the center position by using the Lens shift function (p.
Installation 18 Fit the lens to the projector . Make sure that the lens is fully inserted to the projector . While pressing the top cover release button on the top cover , slide the top cover back to the projector . 1 3 Attaching the lens to the projector Slide the light-block sheet in the groove to mount.
Installation 19 Focus adjustment Set up the projector and project image on the screen. 1. Adjust the focus to make the center area sharpest, by using the focus adjustment of the projector . When the peripheral focus is out of focus in some localized areas, proceed to following adjustments.
Installation 20 Unplugthepowercordsofboththe projectorandexternalequipment fromthe ACoutletbeforeconnecting cables.
Installation 21 VGA cable Unplugthepower cordsofboththe projectorandexternal equipmentfromthe ACoutletbefore connectingcables. Cables used for connection ( = Cables not supplied with this projector .
This projector uses nominal input voltages of 100–240 V AC and it automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor . T o reduce the risk of electrical shock, do not plug into any other type of power system.
2 3 1 The preparation display will disappear after 30 seconds. 4 After the countdown, the input source that was selected the last time and the Lamp control status icon (see page 61) appear on the screen. Selected Input Source and Lamp control Complete peripheral connections (with a computer , VCR, etc.
Basic Operation What is PIN code? PIN (Personal Identification Number) code is a security code that allows the person who knows it to operate the projector . Setting a PIN code prevents unauthorized use of the projector . A PIN code consists of a four-digit number .
Basic Operation How to Operate the On-Screen Menu Side Control On-Screen Menu Remote Control The projector can be adjusted or set via the On-Screen Menu. The menu has a hierarchical structure, with a main menu that is divided into submenus, which are further divided into other submenus.
Basic Operation For detailed functions of each menu, see “Menu T ree” on pages 81-83. Image select For computer source, used to select an image level among Dynamic , Standard , Real , and Image 1-10 (p.39). For Video source, used to select an image level among Dynamic , Standard , Natural, Cinema , and Image 1-10 (p.
The following lens operation can be made with the LENS button on the side control. Press the LENS button to enter each lens operation mode. The selected adjustment display appears on the screen. Display Lens shift on the screen. Use the Point ◄ ► buttons to position the screen to the desired point without having picture distortion.
Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. Press the ZOOM buttons on the remote control to zoom in and out the image.
Basic Operation Press the FREEZE button on the remote control to freeze the picture on the screen. T o cancel the FREEZE function, press the FREEZE button again or press any other button.
Basic Operation Remote Control If a projected picture still has keystone distortion after pressing the AUTO PC button on the remote control, correct the image manually as follows: Press the KEYSTONE button on the remote control to switch the Standard (for V ertical/Horizontal) /Corner correction adjustment.
Basic Operation Note: Y oucanchoosethepatternofPointer( Dot/Arrow / Finger )intheSettingMenu(p.64) Y ou can move the Pointer of the projector with the remote control to emphasize a part of the projected image. Press the POINTER button to activate the Pointer function.
The input source changes each time you press the INPUT button on the side control or the remote control as follows: Input 1→ Input 2→ Input 3 → ... Before using the INPUT button on the side control or the remote control, you must select a correct input source by On-Screen Menu and the latest input source will be displayed.
Direct Operation Input Selection INPUT MENU When your computer is connected to the INPUT 1 (ANALOG) terminal, select RGB (PC analog) . RGB(PC analog) Note: InputsourcechangesiftheINPUT1buttononthe remotecontrolispressed.
Input Selection When the video input signal is connected to the Y -Pb/Cb-Pr/Cr jacks, select Y ,Pb/ Cb,Pr/Cr . When the video input signal is connected to the VIDEO jack, select Video . When the video input signal is connected to the S-VIDEO jack, select S-video .
Computer Input PC System Menu PC System Menu 1 2 PC system can also be selected manually . The PC System Menu Selected system is displayed. Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Input and then press the Point ► or the SELECT button.
Auto PC Adjustment function is provided to automatically adjust Fine sync, T otal dots, Position H and Position V to conform to your computer . T o store the adjusted parameters: The adjusted parameters from the Auto PC Adjustment can be stored in the projector .
Computer Input Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector . Manual PC Adjustment enables you to precisely adjust several parameters to match those special signal formats. The projector has 10 independent memory areas to store those parameters manually adjusted.
Computer Input Note: • Display area (H/V) cannot be selected when 480i , 575i , 480p , 575p , 720p , 1035i , 1080i or 1080p is selectedinthePCSystemMenu(p.
Computer Input Image Level Selection 1 2 Normal picture level preset on the projector . Picture level with improved halftone for graphics. User preset picture adjustment in the Image adjust Menu. (pp.40-42) Image select Menu Press the MENU button to display the On-Screen Menu.
Computer Input Image adjust Menu Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Image adjust and then press the Point ► or the SELECT button. 1 2 Use the Point ▲▼ buttons to select the desired item and then press the SELECT button to display the adjustment dialog box.
Computer Input Press the Point ◄ button to lighten red tone; press the Point ► button to deepen red tone (from 0 to 63). Press the Point ◄ button to lighten green tone; press the Point ► button to deepen green tone (from 0 to 63). Press the Point ◄ button to lighten blue tone; press the Point ► button to deepen blue tone (from 0 to 63).
Computer Input Use the Point ◄► buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15). Press the Point ◄ button to decrease the sharpness of the image; press the Point ► button to increase the sharpness of the image (from 0 to 31).
Computer Input Select the desired screen size that conforms to the input signal source. SCREEN MENU Provide the image within a screen size keeping its original aspect ratio. Note: • Theprojectorcannotdisplayany resolutionhigherthan1920x1200.
Computer Input Adjust the screen scale and position manually with this function. Press the Point ► button or the SELECT button at Custom adj. and Custom adj. is displayed on the screen, you can use the Point ▲▼ buttons to choose the item you want to adjust.
Computer Input This function is used to adjust keystone distortion of the projected image. Use the Point ▲▼ buttons to choose the item you want to adjust. Keystone This function returns all adjusted values to the factory default settings. Press the SELECT button at Reset to display a confirmation box.
If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PA L , SECAM , NTSC , NTSC 4.43 , P AL-M , and P AL-N . The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance.
Video Input Image Level Selection Normal picture level preset on the projector . Picture level adjusted with fine tone. User preset picture adjustment in the Image adjust Menu. (p.48-50) Image select Menu 1 2 Press the MENU button to display the On-Screen Menu.
Video Input 1 2 Press the Point ◄ button to decrease the contrast; press the Point ► button to increase the contrast (from 0 to 63 ). Press the Point ◄ button to decrease the brightness; press the Point ► button to increase the brightness (from 0 to 63 ).
Video Input Use the Point ◄► buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15 ). Press the Point ◄ button to decrease the sharpness of the image; press the Point ► button to increase the sharpness of the image (from 0 to 31 ).
An interlaced video signal can be displayed in progressive mode. Press the Point ◄► buttons to change the progressive scan mode. Off ............. Progressive scan mode is Off . On ............. Progressive scan mode is On . Film ........... For watching a film.
Note: • Whennosignalisdetected, Normal issetautomaticallyandthe Aspectdialogboxdisappears. • TheadjustablerangeforScale H/VandPositionH/Varelimited dependingontheinputsignal.
Video Input This function returns all adjusted values to the factory default settings. Press the SELECT button at Reset to display a confirmation box. T o reset, press the SELECT button at Ye s . Ceiling Rear When this function is set to On , the picture will be top/ bottom and left/right reversed.
Setting Setting Menu Press the MENU button to display the On-Screen Menu. Press the Point ▲▼ buttons to select Setting and press the Point ► or the SELECT button to access the submenu items. 1 2 Use the Point ▲▼ buttons to select the desired item and then press the Point ► or the SELECT button to access the selected item.
This function decides whether to display On-Screen Displays. On ......................... Show all the On-Screen displays. Use this function when you want to project images after the lamp becomes bright enough. The factory default setting is in this option.
Setting Capture Capture This function enables you to capture an image being projected to use it for a starting-up display or interval of presentations. Select Capture and press the SELECT button. A confirmation box appears and select Ye s to capture the projected image.
Setting Enter a Logo PIN code After a correct Logo PIN code is entered, the following dialog box appears. Change the Logo PIN code lock setting Change the Logo PIN code Enter a Logo PIN code When using side control Use the Point ▲▼ buttons on the side control to select a number .
Setting Picture in Picture Picture in Picture Show the selected mode ( Off / User 1-5 ) and its status ( Stored / Free / Adj. ). User 1 and User 2 have stored default values. See page 29 for details. User setting P in P: Provide the images of Main picture and Sub picture at the ratio of Screen aspect in the Screen Menu.
Setting Set the Frame Lock to Main picture or Sub picture. Frame lock Press the SELECT button at Reset to display a confirmation box. T o reset, press the SELECT button at Y es . Reset T o store the adjusted data. Stored data V acant Return to Picture in Picture menu.
Setting 59 When displaying multiple screens, eliminates the difference in color between the images that are projected from the projectors. When multiple sets are used simultaneously , this projector allows the user to correct the difference of colors among the sets.
Setting 60 Select Normal or Enhanced according to the output signal of video equipment. Press the Point ▲▼ buttons to switch between each option. Normal ........ When the output of video equipment is set to “ST ANDARD.” Enhanced .... When the output of video equipment is set to “ENHANCED.
This function allows you to change brightness of the screen. Lamp control Setting Auto . . . . Brightness according to the input signal. Normal . . Normal brightness. Eco 1 . . . Lower brightness and decrease of fan speed. Lower brightness reduces the lamp power consumption and extends the lamp life.
Setting Simple mode buttons Only these buttons are active when the simple mode is set to On . [ON, ST AND-BY , SHUTTER, INPUT , MENU, AUT O PC, SCREEN, SELECT (Mouse Pointer included), L-CLICK, R-CLICK, P-TIMER, POINTER, PIP , ON-OFF switch] Number buttons (p.
Note: • Factorydefaultis OFF: 5 Min . • WhentheshutterisclosedwhilethePowermanagement functionisworking,thePowermanagementfunctionis released. Setting T imer left before Lamp is off.
Setting Y ou can emphasize a part of the projected image with this function. Use the Point ▲▼ buttons to select a pattern of the Pointer (Dot, Arrow or Finger). (p.31) This function allows you to change the presentation of the P-timer and execute it.
Setting Key lock Key lock PIN code lock This function locks the side control and remote control buttons to prevent operation by unauthorized persons. …Unlocked. …Lock the operation of the side control. T o unlock, use the remote control. … Lock the operation of the remote control.
Setting Enter a PIN code Change the PIN code Use the Point ▲▼ buttons to select Off , On 1 or On 2 . Press the SELECT button to close the dialog box. Change the PIN code lock setting Enter a PIN code When using side control Use the Point ▲▼ buttons on the side control to select a number .
Shutter function is available to block out light to the screen, so that the screen can be used for the other presenters. Prohibit the shutter operation from the remote control and the projector's side control. …………… Permit the shutter operation from both the remote control and the projector's side control.
When you want to make a digital processing of a projected image faster , set this function. Use the Point ▲▼ buttons, select an item of Off / Low / Mid / High . Digital processing speed becomes fast by order of Low → Mid → High. High is the fastest.
Setting 69 Be sure to reset the Lamp replacement counter after the lamp is replaced. (p. 65) Press the Point ▲▼ buttons to choose the Lamp counter function and then press the Point ► or the SELECT button to access the submenu items. Lamp counter .
Setting This function returns all setting values except for User logo , PIN code lock , Logo PIN code lock and Filter counter to the factory default settings. V arious test pattern are available for use when setting up the projector: Color , Gradation1-4, All white, All black and Cross.
Filter prevents dust from accumulating on the optical elements inside the projector . Should the filter becomes clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of the projector .
Filter cartridge T urn off the projector , and unplug the AC power cord from the AC outlet. First, clean up the dust on the projector and around the air vents. 1 2 Press ▼ downwards on the filter cover to release the latch and open the filter cover .
Maintenance and Care Be sure to reset the Scroll counter after replacing the filter cartridge. Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Setting and then press the Point ► or the SELECT button. Use the Point ▲▼ buttons to select Filter counter and then press the SELECT button.
Maintenance and Care T urn off the projector and unplug the AC power cord. Let the projector cool for at least 45 minutes. Loosen the screws and open the lamp cover . Loosen 3 screws of the lamp and pull out the lamp by using the built in handle. 1 3 Replace the lamp with a new one.
Maintenance and Care ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer . When ordering, give the following information to the dealer . ● Model No. of your projector : PLC-HP7000L ● Replacement Lamp T ype No. : POA-LMP149 (Service Parts No.
Maintenance and Care Unplug the AC power cord before cleaning. Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner , or use a lens cleaning paper or commercially available air blower to clean the lens.
Maintenance and Care The W ARNING indicators show the state of the function which protects the projector . Check the state of the W ARNING indicators and the POWER indicator to take proper maintenance. The projector is shut down and the W ARNING TEMP .
Before calling your dealer or service center for assistance, check the items below once again. 1. Make sure you have properly connected the projector to peripheral equipment as described on pages 20-21. 2. Check the cable connection. Make sure that all computers, video equipment, and power cords are properly connected.
Appendix 79 appears on the screen – Filter is out of scroll. Replace the filter cartridge with a new one promptly . (See pages 72-73) The image is out of focus. – Adjust the focus of the projector . – Check Projection Lens to see if it needs cleaning.
Appendix W ARNING: High voltages are used to operate this projector . Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center.
Appendix Mode 10 Input RGB (PC analog) Y , Pb/Cb,Pr/Cr RGB (Scart) HDMI Network Video RGB Video Y , Pb/Cb,Pr/Cr S-video Input 3 Input H-sync freq. V -sync freq. Information Screen Language Lamp status Power management Remote control Note: TheMenudisplayvariesdependingontheinputsignal.
Appendix Note: TheMenudisplayvariesdependingon theinputsignal. System (2) Auto PA L SECAM NTSC NTSC 4.43 P AL-M P AL-N System (3) Auto 1080i 1035i 720p 575p 480p 575i 480i Image select Cinema Screen Normal Wide(16:9) Full Zoom Rear Ceiling On/Off On/Off Custom adj.
Appendix Setting Language Fan control Blue/User/Black Y es/No 12 languages provided Menu Lamp control Filter control Normal/Max Power management Background RC sensor Shut down On/Countdown Off/Of f Di.
Appendix On/Off Direct on Pointer Dot/Arrow/Finger Y es/No Management Remote control Projector 5 - 480 Min P-timer Count up T imer Start/Stop/Restart Count down Security Off Projector Remote control K.
Check the indicators for the projector condition. The projector is operating normally . Appendix Indicators and Projector Condition 85 Indicators Projector Condition POWER green LAMP/ SHUTTER red/blue LAMP REPLACE orange W ARNING FIL TER orange W ARNING TEMP .
The projector is detecting abnormal condition. When the filter detects clogging, reaches a time set in the timer setting or runs out of the filter scroll, the W ARNING FIL TER indicator lights orange. When this indicator lights orange, replace the filter or the filter cartridge with a new one promptly .
The projector is detecting abnormal condition. Appendix 87 Indicators Projector Condition POWER green LAMP/ SHUTTER red/blue LAMP REPLACE orange W ARNING FIL TER orange W ARNING TEMP . red If the Filter counter reaches a time set in the timer setting, a Filter replacement icon (Fig.
Ba sica lly thi s p roje cto r ca n a ccep t t he si gn al fro m a ll c omp uter s w ith t he V - an d H-Fr equ ency me ntio ned below and less than 162 MHz of Dot Clock. When the input signal is Analog, refer to the chart below . Appendix Note: True cannotbeselectedwhen isselected.
Appendix When the input signal is digital from HDMI/DVI-D terminal, refer to the chart below . Note: • Dependingontheconditionofsignalsandthetypeandlengthofcables,thesesignalsmaynotbe properlyviewed.
Appendix T echnical Specifications 90 Mechanical Information Projector T ype Multi-media Projector Dim ensi ons ( W x H x D) 14.56'' x 7.36'' x 17.32'' (370.0 mm x 187.0 mm x 439.9 mm) Net Weigh t 35.5 lbs (16.1 kg) Feet Adjustment 0˚ to 6.
The lens of this projector can be replaced with other optional lens. This feature enables you to use the projector for wide variety of uses. For installation and replacement of the lens, always contact the sales dealer . The projector lens must be installed or replaced by well-trained sales or service engineers.
ANALOG/ ANALOG OUT (Mini D-sub 15 pin) Appendix Configurations of T erminals 5 1 2 3 4 10 9 6 7 8 15 14 13 1 1 12 CONTROL PORT CONNECT OR (D-sub 9 pin) ----- R X D T X D ----- SG ----- ----- ----- Ser.
Write down the PIN code number in the column below and keep it with this manual securely . If you forgot or lost the number and unable to operate the projector , contact the service center . Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* * Should the four-digit number be changed, the factory set number will be invalid.
Appendix Dimensions Unit: inch (mm) Screw Holes for Ceiling Mount Screw: M6 Depth: 0.393 (10.0) 94 3.94 (100) 14.57 (370) 5.75 (146) 17.32 (439.9) 13.58 (345) 4.13 (105) 5.20 (132) 4.33 (110) 4.33 (110) 7.36 (187) 6.5º MAX Screw Holes for Ceiling Mount Screw: M6 Depth: 0.
Appendix This projector provides a function to control and monitor the projector's operations by using the RS-232C serial port. Connect a RS-232C serial cross cable to CONTROL PORT on the projector and serial port on the PC.
The command is sent from PC to the projector with the format below; 'C' [Command] 'CR' Command: two characters (refer to the command table below .
Appendix The command is sent from PC to the projector with the format below; 'CR' [Command] 'CR' Command: one character (refer to the command table below .
KY2AL.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Sanyo PLC-HP7000L c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Sanyo PLC-HP7000L - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Sanyo PLC-HP7000L, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Sanyo PLC-HP7000L va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Sanyo PLC-HP7000L, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Sanyo PLC-HP7000L.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Sanyo PLC-HP7000L. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Sanyo PLC-HP7000L ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
