Manuel d'utilisation / d'entretien du produit LCD-37CA9S du fabricant Sanyo
Aller à la page of 44
Owner ’ s Manual LCD TV MODEL LCD-32CA9S LCD-37CA9S LCD-42CA9S LCD-CA9S-A NEW.indd 1 2/06/2008 2:07:42 PM.
2 TO THE OWNER Before operating this LCD TV , read this manual thoroughly and operate the LCD TV properly . This LCD TV provides many convenient features and functions. Operating the LCD TV properly enables you to manage those features and maintains it in better condition for a considerable time.
3 SAFETY INSTRUCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this LCD TV from AC power supply before cleaning. Do not use liquid or aerosol cleaners.
4 T ABLE FEA TURE AND DESIGN .....................................5 PREP ARA TION........................................6 P ART NAMES AND FUNCTIONS 6 CONNECTING LCD TV ...................... .8 CONNECTING THE AC POWER CORD 8 CONNECTING OUTDOOR AERIAL 8 CONNECTING A COMPUTER 9 CONNECTING VIDEO EQUIPMENT 10 BEFORE OPERA TION.
5 Feature and Design 1366 x 768 pixel HD LCD Panel with high contrast ratio and wide viewing angle. O High Definition LCD Panel VIZON Engine, SANYO High Quality Image Processing T echnology reproduces clear , dynamic, natural and realistic picture along with HD LCD Panel T echnology .
6 INDICA TORS FRONT CARE FOR USING LCD TV Ɣ Do not bump or scratch the panel surface as this causes flaws on the surface of the screen. Ɣ There may be some tiny black points and/or blight points on the SCREEN .
7 AV2 / 1AA2DES0980-- N5DV PC INPUT >PS< Connect the cable with a plug from aerial jack to the aerial socket on the cabinet back. Aerial Jack Connect video and audio outputs from video equipment.
8 CONNECTING LCD TV This LCD TV uses nominal input voltages of 1 10-242V AC. This LCD TV automatically selects the correct input voltage. It is designed to work with single-phase power systems. T o reduce risk of electrical shock, do not plug into any other type of power system.
9 AV2 / PC INPUT CONNECTING LCD TV Cable used for connection (This cable is not supplied with this LCD TV .) Ɣ PC/VGA Cable (D-SUB 15pin) Ɣ HDMI Cable: HDMI Input Ɣ MAC Adapter (in the .
10 AV2 / 1AA2DES0980-- N5DV PC INPUT >PS< External Audio Equipment Video Source (example) DVD Player Audio cable (RCA X 2) R L CR/PR,CB/PB, Y Component Video Source (example) DVD video equipment.
11 3 2 ,1 7 Ÿ / ź / Ż / Ź b utton Display button SOUND SYSTEM butto n COLOUR SYSTEM button E CO button AUDIO MODE butto n CHANNEL RECALL butto n WIDE b utton BEFORE OPERA TION MENU button SPORTS b.
12 REMOTE CONTROL BA TTERIES INST ALLA TION Remove the battery compartment cover . Insert two size AAA batteries (1.5V) according to "+" and "-" polarity markings inside the battery compartment. Close the battery compartment cover .
13 BEFORE OPERA TION TV/A V MODE MENU LIST MAIN MENU (CHANNEL MENU) CHANNEL MENU PICTURE MENU SOUND MENU Note: "CHANNEL" menu is only active in TV mode. ON-SCREEN MENU SEL A DJ BACK EXIT BACK MENU SOUND MODE BASS TREBLE BALANCE 50 50 50 LCD-CA9S-A NEW.
14 BEFORE OPERA TION SELECT ADJUST BACK EXIT - - : - - ON TIMER SEL A DJ BACK EXIT ON TIMER CH 29 OFF BACK MENU OFF TIMER TIMER MENU OSD MENU H-POSITION V-POSITION DURA TION SEL ADJ BACK EXIT LANGUAGE.
15 ＳＥＬ Ａ ＤＪ ＢＡＣＫ ＥＸＩＴ ＢＡＣＫ ＭＥＮＵ ECO CHILD LOCK PC ADJUST BEFORE OPERA TION PC/HDMI MODE MENU LIST MAIN MENU (PICTURE MENU) H-POSITION V-POSITION CLOCK PHASE SEL A DJ BACK EXIT BACK MENU AUTO ADJUST ST ART SYSTEM MENU Note: 1.
16 Connect LCD TV's AC Power Cord into an AC outlet. 2 1 3 BASIC OPERA TION TURNING ON / OFF LCD TV Complete the peripheral connections before turning on LCD TV . (Please refer to "CONNECTING LCD TV".) Press POWER ON/OFF button on Side Controls of LCD TV or on Remote Control to turn it ON.
17 BASIC OPERA TION VOLUME Press COLOUR SYSTEM button repeatedly to select "AUTO", "P AL", "SECAM", "NTSC" or "NTSC4.43" until the best colour effect is reached. 50 This function is used to automatically adjust panel's brightness by ambient brightness.
18 User presets picture adjustment in Picture mode. BASIC OPERA TION Simply press AUDIO MODE button on Remote Control to select the following audio signals: VIDEO MODE Simply press VIDEO MODE button on Remote Control to select the following video signals: AUDIO MODE STILL Press STILL button to switch the still function On or Off.
19 BASIC OPERA TION COLORFUL WORLD GREEN FIELD SNOW WORLD W A TER WORLD INDOOR SPORT Select sports mode "Colorful World", "Green Field", "Snow W orld", "W ater World" and "Indoor Sport" by pressing SPOR TS button repeatly on Remote Controls.
20 BASIC OPERA TION OFF TIMER T o set OFF TIMER by pressing TIMER button on Remote Control. The timer dialogue box will appear on the screen for a short while. T o select "0 min", "30 min", "60 min", "90 min" or "120 min" with TIMER buttons.
2 1 BASIC OPERA TIO N TEXT REVEA L b utton T EXT YELLOW button T XT / TV button TEXT RED b utton OPERA TION OF REMOTE CONTROL (IN TEXT MODE) POWER ON/OFF button MUTE b utton NUMERIC buttons TEXT CANEL.
22 BASIC OPERA TION TEXT/ TV TEXT REVEAL TEXT CANCEL Press TXT/TV button to select teletext. Press again will display: Ŷ 79PRGH79ĺ 7(;7PRGHĺ0,;PRGHĺ 79 Ŷ$ 9PRGH $ 9ĺ7(;7PRGHĺ0,;PRGHĺ $ 9 Note: Ŷ TEXT mode: TEXT screen is displayed.
23 TEXT SIZE Press TEXT SIZE button to enlarge the top half of the text page. Press TEXT SIZE button again to enlarge the bottom half of the text page.
24 MENU OPERA TION (TV/ A V mode) All receivable channels are automatically tuned in and memorized in consecutive programme position. Ɣ After all receivable channels have been found and stored, the TV set will automatically return to programme position “1”.
25 MENU OPERA TION (TV/ A V mode) The setting for sound system is only active in TV mode. Press POINT ŻŹ buttons repeatedly to select "D/K", "I", "M" or "B/G" until the best sound effect is reached. This feature is used to remove unwanted channels from the channel scanning memory .
26 MENU OPERA TION (TV/ A V mode) Note: Ɣ TINT cannot be adjusted when HDMI input. Ɣ TINT cannot be adjusted except in NTSC / NTSC 4.43 system. PICTURE Press MENU button and the main menu will appear . Press POINT ŻŹ buttons to select "PICTURE", and will display PICTURE menu.
27 MENU OPERA TION (TV/ A V mode) Adjust the balance of the left and right channels. (0~100) Press POINT Ż button to decrease low frequency sound, and POINT Ź button to increase low frequency sound. (0~100) Press POINT ŻŹ buttons to select "ST ANDARD", "NEWS", "MUSIC" or "PERSONAL".
28 MENU OPERA TION (TV/ A V mode) TIMER SELECT ADJUST BACK EXIT - - : - - ON TIMER SEL A DJ BACK EXIT ON TIMER CH 29 OFF BACK MENU OFF TIMER SCREEN MENU SELECT ADJUST BACK EXIT - - : - - ON TIMER SEL A DJ BACK EXIT ON TIMER CH 29 OFF BACK MENU OFF TIMER Press MENU button and the main menu will appear .
29 MENU OPERA TION (TV/ A V mode) H-POSITION V-POSITION DURATION SEL ADJ BACK EXIT LANGUAGE 15 SEC BACK MENU TRANSPARENCE TTX LANGUAGE WESTERN OSD Press MENU button and the main menu will appear . Press POINT ŻŹ buttons to select "OSD", and will display OSD menu.
30 MENU OPERA TION (TV/ A V mode) Note: Ɣ "PC ADJUST" can not be selected except for PC mode. SYSTEM SCREEN MENU Press MENU button and the main menu will appear . Press POINT ŻŹ buttons to select "SYSTEM", and will display SYSTEM menu.
31 PICTURE Press MENU button and the main menu will appear . Press POINT ŻŹ buttons to select "PICTURE", and will display PICTURE menu. Press POINT Ÿź buttons to select the item desired.
32 SOUND Press MENU button and the main menu will appear . Press POINT ŻŹ buttons to select "SOUND", and will display SOUND menu. Press POINT Ÿź buttons to select the item desired. Press POINT ŻŹ buttons to adjust value. SCREEN MENU Note: For the details, please refer to "SOUND" on page 27.
33 MENU OPERA TION (PC/HDMI mode) SCREEN MENU Press MENU button and the main menu will appear . Press POINT ŻŹ buttons to select "SYSTEM", and will display SYSTEM menu. Press POINT Ÿź buttons to select the item desired. Press POINT ŻŹ buttons to adjust value.
3 4 MENU OPERA TIO N The Dealer Mode has 7 di ff erent modes: V O LUME L OC K, TUNIN G L OC K, S TA R T M O DE, OS D, R C , RE S ET and A C P O WER M O DE . S IDE CO NTR O L S REM O TE CO NTR O L S V O LUME L OCK Thi s fu n c ti o n i s used t o limit th e m a xim a l v o l u m e.
35 Be sure to disconnect the AC Power cord from AC outlet before cleaning the LCD TV . Clean your LCD TV as follows: Ɣ Gently wipe the screen and cabinet with dry soft cloth. Ɣ The screen is likely to be damaged if it is not maintained properly . Do not use hard objects like a hard cloth or paper .
36 APPENDIX TROUBLESHOOTING Before calling your dealer or service center for assistance, check the matters below once again. 1. Make sure you have connected LCD TV to your equipment as described in the section "CONNECTING LCD TV". 2. Check cable connection.
37 Model LCD-32CA9S / LCD-37CA9S / LCD-42CA9S Maximum Visible Range LCD-32CA9S: 81 cm (Screen Diagonal Size); LCD-37CA9S: 94 cm (Screen Diagonal Size); LCD-42CA9S: 106cm (Screen Diagonal Size); Pictur.
38 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 CONFIGURA TIONS OF VGA TERMINALS VGA IN (D-SUB) TERMINAL T erminal : D-SUB15 PIN Connect video output terminal of LCD TV to this terminal with VGA Cable (not supplied). When connecting Macintosh computer , the MAC Adapter (not supplied) is required.
39 APPENDIX When input signal is digital from DVD terminal, refer to the chart below . When input signal is digital from HDMI terminal, refer to the chart below . Parts Name Toxic Element Plastic Display Screen Circuit Board Hardware Remote Control Other Parts ( eg.
40 Ɣ Through in uninstalling work, handling with more than two people is recommended. Ɣ When holding (moving or lifting) the LCD Display , hold the display's body . Do not handle the LCD TV by holding the attached accessory parts (speakers), otherwise it may result in damage.
41 APPENDIX Uninstalling Stand Base (Continued) Cover the holes where you remove the stand base from the dust etc. by paste the deck label (supplied) to these holes.
42 Note LCD-CA9S-A NEW.indd 42 2/06/2008 2:08:55 PM.
43 Note LCD-CA9S-A NEW.indd 43 2/06/2008 2:08:55 PM.
Part No. 1AA6P1P5592-A N5EV -A (UH3-B) SANYO Electronics CO., Ltd. LCD-CA9S-A NEW.indd 44 2/06/2008 2:08:56 PM.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Sanyo LCD-37CA9S c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Sanyo LCD-37CA9S - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Sanyo LCD-37CA9S, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Sanyo LCD-37CA9S va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Sanyo LCD-37CA9S, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Sanyo LCD-37CA9S.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Sanyo LCD-37CA9S. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Sanyo LCD-37CA9S ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
