Manuel d'utilisation / d'entretien du produit SP43R1 du fabricant Samsung
Aller à la page of 64
COLOUR TELEVISION SP43T8 SP42W4 SP43W6 SP42Q2 SP43Q5/47Q5 SP43R1/54R1 Owner’ s Instructions Before operating the unit, please read this manual thoroughly , and retain it for future reference. ON-SCREEN MENUS TELETEXT S ELF F OCUS R egister your product at www .
BP68-00457A(J60B_Euro_ENG) 2004/12/28 01:21 PM Page 2.
English - 3 Impor tant W arranty Inf ormation Regarding T elevision F ormat V iewing S tandard screen format televisions (4:3, the aspect ratio of the screen width to height) are primarily designed to view standard format full-motion video. The images displayed on them should primarily be in the standard 4:3 ratio format and constantly moving.
English - 4 Contents ◆ F OREWORD ■ Important Warranty Information Regarding Television Format Viewing ........ 3 ◆ C ONNECTING AND P REP ARING Y OUR T ELEVISION ■ Control Panels (depending on the model) ........................................
English - 5 Contents (continued) ◆ U SING Y OUR T ELEVISION (continued) ■ Extra Sound Settings ..................................................................................... 41 - Auto volume - Dolby Virtual ■ Setting the Melody Sound ....
English - 6 Contr ol P anels (depending on the model) ➢ The actual configuration on your TV may be different, depending on your model. ➢ ◆ You can use the C/P. buttons to switch on the TV when it is in standby mode depending on the model. ◆ The - + and C/P.
English - 7 Contr ol P anels (depending on the model) (continued) ➢ The actual configuration on your TV may be different, depending on your model. g on e TV.
English - 8 Connection P anels (depending on the model) ➢ The actual configuration on your TV may be different, depending on your model. Side of the TV Rear of the TV ( a ) Video Input ( b ) Audio Input ( c ) S-Video Input ➢ For further details about connection, refer to pages 53~57.
English - 9 Using a Displa y Dec k (depending on the model) You can display a VCR or DVD Player, etc. by using the display deck. SP43W6 Inser ting the Bat teries in the Remote Control You must insert .
English - 10 Infrared Remote Contr ol ➢ The performance of the remote control may be affected by bright light. DIRECT CHANNEL SELECTION MENU DISPLAY/ TELETEXT INDEX CONTROL THE CURSOR IN THE ON-SCRE.
English - 11 To view television channels correctly, a signal must be received by the set from one of the following sources: ◆ An outdoor aerial ◆ A cable television network ◆ A satellite network 1 In the first three cases, connect the aerial or network input cable to the 75 Ω coaxial socket on the rear of the television.
English - 12 Connecting a S atellite Receiv er or Decoder In order to watch television programmes broadcast via a satellite network, you must connect a satellite receiver to the rear of TV. Also, in order to descramble a coded transmission signal, you must connect a decoder to the rear of TV.
English - 13 The mains lead is attached to the rear of your television. 1 Plug the mains lead into an appropriate socket. ➢ The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz. 2 Press the “ I ” button (On/Off) on the front or side of the television.
English - 14 Placing Y our T elevision in Standb y Mode Your television can be placed in Standby mode, in order to reduce the power consumption. The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
English - 15 Becoming F amiliar with the Remote Contr ol The remote control is used mainly to: ◆ Change channels and adjust the volume ◆ Set up the television using the on-screen menu system The following table presents the most frequently used buttons and their functions.
English - 16 Plug and Pla y F eature TV Auto Store Country : China √ √ Search √ √ Enter Return Move Enter Skip Belgum Germany Spain France Italy Netherlands Switzerland Sweden United Kingdom Eastern Europe Others Plug & Play Start Plug & Play OK Enter Skip Plug & Play Check antenna input.
English - 17 If you want to reset this feature... 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button until the Setup is selected. Result : The options available in the Setup group are displayed. 3 Press the ENTER () button.
English - 18 Choosing Y our L anguage When you start using your television for the first time, you must select the language which will be used for displaying menus and indications. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button until the Setup is selected.
English - 19 The “Self Focus” feature automatically finds the optimum picture quality when blurring, overlapping colours or incorrect focus occurs. These conditions may be caused by moving your TV. 1 Press the MENU () b u tton. Result : The main menu is displayed.
English - 20 The “Self Focus” feature starts on default. It will automatically begin 10 minutes after switching on the power and the appearance of the screen image. To set the optimum picture quality, the “Self Focus” will automatically begin again after another 30 minutes, as the screen image is then fully stabilised.
English - 21 1 Press the MENU () b u tton. Result : The main menu is displayed. 2 Press the ▲ or ▼ button until the Setup is selected. Result : The options available in the Setup group are displayed. 3 Press the ENTER () button. 4 Press the ▲ or ▼ button until the S elf Focus is selected.
English - 22 You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.
English - 23 This operation allows you to change the programme numbers of stored channels. This operation may be necessary after using auto store. You can delete the channels you do not want to keep. 1 Press the MENU () b u tton. Result : The main menu is displayed.
English - 24 You can store the television channels, including those received via cable networks. When storing channels manually, you can choose: ◆ Whether or not to store each of the channels found ◆ The programme number of each stored channel which you wish to identify 1 Press the MENU () button.
English - 25 10 If you know the number of the channel to be stored, see the following steps. ◆ Press the ▲ or ▼ button until the Channel is selected. ◆ Press the œ or √ button. ◆ Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).
English - 26 You can exclude the channels you chosen from the channels you scanned. When you scan through the stored channels, those you have chosen to skip are not displayed. All of the channels that you do not specifically choose to skip are displayed during scanning.
English - 27 TV Channel Auto Store √ √ Manual Store √ √ Add/Delete √ √ Sort √ √ Name √ √ ▼ More Move Enter Return TV Name P 1 : ----- P 2 : ----- P 3 : ----- P 4 : ----- P 5 : --.
English - 28 This feature allows you to lock the television so that it cannot be switched on via the front panel. It can, however, still be switched on via the remote control. Thus, by keeping the remote control away from unauthorised users, such as children, you can prevent them from watching unsuitable programmes.
English - 29 If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, you may have to fine tune the channel manually. 1 Press the MENU () b u tton.
English - 30 TV Channel ▲ More Child Lock √ √ Fine Tune √ √ LNA : Off √ √ Move Enter Return TV Channel ▲ More Child Lock √ √ Fine Tune √ √ LNA : Off √ √ Move Enter Return This feature is very useful in the situation that the TV is used in a weak signal, and amplifies the TV signal in the weak signal area, but not noise.
English - 31 You can select the type of picture which best corresponds to your viewing requirements. 1 Press the MENU () b u tton. Result : The main menu is displayed. 2 Press the ▲ or ▼ button until the Picture is selected. Result : The options available in the Picture group are displayed.
English - 32 Your television has several settings options that allow you to control picture quality. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button until the Picture is selected. Result : The options available in the Picture group are displayed.
English - 33 S electing the Picture Size (4:3 Model) TV Picture Mode : Dynamic √ √ Custom √ √ Colour Tone : Normal √ √ Size : Normal √ √ Scan Mode : Auto √ √ Digital NR : Off √ .
English - 34 S electing the Picture Size (Wide Model) You can select the picture size which best corresponds to your viewing requirements. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button until the Picture is selected.
English - 35 S electing the Picture Size (Wide Model) (continued) 4:3 Signal Auto Wide 16:9 Panorama Zoom1 Zoom2 4:3 Cinema1 Cinema2 16:9 Signal Auto Wide 16:9 Panorama Zoom1 Zoom2 4:3 Cinema1 Cinema2.
English - 36 TV Picture Mode : Dynamic √ √ Custom √ √ Colour Tone : Normal √ √ Size : Normal √ √ Scan Mode : Auto √ √ Digital NR : Off √ √ Move Enter Return TV Picture Mode : D.
English - 37 If the signal received by your television is weak, you can activate this feature to help reduce any static and ghosting that may appear on the screen. 1 Press the MENU () b u tton. Result : The main menu is displayed. 2 Press the ▲ or ▼ button until the Picture is selected.
English - 38 If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the Blue screen mode to Off . 1 Press the MENU () button.
English - 39 You can select the type of special sound effect to be used when watching a given broadcast. 1 Press the MENU () b u tton. Result : The main menu is displayed. 2 Press the ▲ or ▼ button until the Sound is selected. Result : The options available in the Sound group are displayed.
English - 40 The sound settings can be adjusted to suit your personal preferences. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button until the Sound is selected. Result : The options available in the Sound group are displayed.
English - 41 ◆ Auto Volume Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed.
English - 42 You can hear clear melody sound when the television is powered on or off. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button until the Setup is selected. Result : The options available in the Setup group are displayed.
English - 43 The “DUAL I-II” button displays/controls the processing and output of the audio signal. When power is switched on, the mode is automatically preset to either “Dual I ” or “Stereo”, depending on the current transmission.
English - 44 You can set the television’s clock so that the current time is displayed by pressing the “INFO ( )” button. You must also set the time if you wish to use the automatic on or off timers. ➢ When pressing the “ I ” button (On/Off) on the front of the television, the clock setting will be reset.
English - 45 Of f You can select a time period of between 30 and 180 minutes after which the television automatically switches to Standby mode. 1 Press the MENU () b u tton. Result : The main menu is displayed. 2 Press the ▲ or ▼ button until the Setup is selected.
English - 46 You can set the On/Off timers so that the television will: ◆ Switch on automatically and tune to the channel of your choice at the time you select ◆ Switch off automatically at the time you select ➢ The first step is to set the television’s clock (refer to “Setting and Displaying the Current Time” on page 44).
English - 47 Vi e wing an External Signal S ource Use the remote control to switch between viewing signals from connected equipment, such as VCR, DVD, Set-Top Box and the TV source (broadcast or cable) 1 Press the MENU () button. Result : The options available in the Input group are displayed.
English - 48 Most television channels provide written information services via teletext. Information provided includes: ◆ Television programme times ◆ News bulletins and weather forecasts ◆ Sports results ◆ Travel information This information is divided into numbered pages (see diagram).
English - 49 You can display Teletext information at any time on your television. ☛ For Teletext information to be displayed correctly, channel reception must be stable; otherwise: ◆ Information may be missing ◆ Some pages may not be displayed 1 Select the channel providing the Teletext service using the P or button.
English - 50 S electing Display Options When you have displayed a Teletext page, you can select various options to suit your requirements. To display..
English - 51 S electing a T eletext P age You can enter the page number directly by pressing the numeric buttons on the remote control. 1 Enter the three-digit page number given in the content by pressing the corresponding numeric buttons. Result : The current page counter is incremented and the page is then displayed.
English - 52 You can store up to four teletext pages to display them later at leisure. 1 Select the LIST mode using the button. Result : Four 3-digit numbers are displayed in different colours. ➢ The button is used to switch between the LIST and FLOF modes.
English - 53 Connecting to the External Input/Outputs ➢ EXT 1 is used for the equipment with an RGB output, such as video game devices or video disc players.
English - 54 Connecting to the A udio Output ➢ The RCA ( AUDIO-L and R ) connectors are used for equipment, such as an audio system (to take full advantage of the Surround sound effect).
English - 55 Connecting to the RC A Input ➢ The RCA ( VIDEO + AUDIO-L and R ) connectors are used for the equipment, such as camcorders, video disc players, and some video game devices.
English - 56 Connecting to the S-V ideo Input ➢ The S-VIDEO (or S-VIDEO INPUT ) and RCA ( AUDIO-L and R ) connectors are used for equipment with an S-Video output, such as a camcorder or VCR. Camcorder VCR ① To play pictures and sound, both the S-VIDEO (or S-VIDEO INPUT ) and RCA connectors must be used.
English - 57 Connecting to the Component Input ➢ The COMPONENT IN connectors are used for equipment with a DVD or DTV receiver output. (480i, 480p, 576i, 576p, 1080i) DVD Rear of the TV DTV receiver.
English - 58 Redirecting an Input to the External Output Your television enables you to choose which audio/video signals are output to the external connector. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button until the Setup is selected.
English - 59 Pr ogramming the Remote Contr ol f or Other Components Your TV comes equipped with a universal remote control. In addition to controlling the TV, the universal remote control can also operate a Set-Top Box, VCR, Cable box and DVD (even if your VCR, Cable box and DVD are made by manufacturers other than Samsung).
English - 60 Pr ogramming the Remote Contr ol f or Other Components VCR Remote Control Codes Cable Box (CATV) Remote Control Codes DVD Remote Control Codes BP68-00457A(J60B_Euro_ENG) 2004/12/28 01:22 .
English - 61 Tr oubleshooting: Before Contacting S ervice Personnel No sound or picture Normal picture but no sound No picture or black and white picture Sound and picture interference Blurred or snowy picture, distorted sound Remote control malfunctions ◆ Check that the mains lead has been connected to a wall socket.
English - 62 Memo BP68-00457A(J60B_Euro_ENG) 2004/12/28 01:22 PM Page 62.
English - 63 Memo BP68-00457A(J60B_Euro_ENG) 2004/12/28 01:22 PM Page 63.
ELECTRONICS BP68-00457A-02 - AFTER SALES SERVICE - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Samsung SP43R1 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Samsung SP43R1 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Samsung SP43R1, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Samsung SP43R1 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Samsung SP43R1, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Samsung SP43R1.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Samsung SP43R1. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Samsung SP43R1 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
