Manuel d'utilisation / d'entretien du produit P63FP du fabricant Samsung
Aller à la page of 117
SyncMaster P50HP, P50HP-2, P63FP, P63FP-2 PDP Display User Manual The color and the appearance may differ depending on the product, and the specificatio ns are subjec t to change without prior notice to improve the performance.
Safety Instructions Notational Note These safety instructions must be followed to ensure your safety and prevent property dam- age. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment.
Ensure that the power plug is plugged into the power outlet firmly and correctly. • Otherwise, this may result in fire. Do not forcefully bend or pull the power plug and do not place any heavy material on it. • Otherwise, this may result in fire. Do not connect multiple appliances to the same power outlet.
Keep heating appliances as far away from the power cord or the product as possible. • Otherwise, this may result in electric shock or fire. Do not install it in a badly ventilated location such as a bookcase or closet. • Otherwise, this may result in fire due to an increase in the in- ternal temperature.
When cleaning the power plug pins or dusting the power outlet, clean it with a dry cloth. • Otherwise, it may result in fire. When cleaning the product, make sure to disconnect the power cord. • Otherwise, it may result in electric shock or fire. When cleaning the product, disconnect the power cord and clean it with a soft, dry cloth.
If thunder or lightning is occurring, do not touch the power cord or antenna cable. • Otherwise, this may result in electric shock or fire. Do not try to move the monitor by pulling only the wire or the signal cable. • Otherwise, it may fall and result in electric shock, damage to the product or fire due to damage to the cable.
To avoid eyestrain, do not sit too close to the product. Take a rest for at least five (5) minutes after using the monitor for one (1) hour. • This reduces eye fatigue. Do not install it in an unstable location such as an unstable rack or uneven surface or a location exposed to vibrations.
The batteries (and rechargeable batteries) are not ordinary re- fuse and must be returned for recycling purposes. The customer is responsible for returning the used or rechargeable batteries for recycling.
Do not put any heavy objects on the product. • This may result in personal injury and/or damage to the prod- uct. Safety Instructions 8.
Introduction Package Contents Note Please make sure the following items are included with your PDP Display. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Checking the Contents of the Package Remove the lock from the package box, as shown in the figure above.
PDP Display Manuals Quick Setup Guide Warranty Card (Not available in all loca- tions) User's Guide Cables Power Cord D-Sub Cable Others Remote Control Batteries (AAA X 2) (Not available in all l.
Your PDP Display Front SOURCE button [SOURCE] Switches from PC mode to Video mode. Changing the source is only al- lowed for external devices that are connected to the PDP Display at the time.
Note See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your PDP Display OFF when it is not needed or when leaving it unattended for long periods. Remote Control Sensor Aim the remote control towards this spot on the PDP Display.
RS232C OUT/IN (RS232C Serial PORT) MDC(Multiple Display Control) Program Port RGB IN (PC Connection Terminal (In- put)) • Use a D-Sub Cable (15 pin D-Sub) - PC mode (Analog PC) • Connect the RGB IN port on the monitor to the BNC port on the PC using the RGB to BNC cable.
AV IN [VIDEO] Connect the AV IN [VIDEO] terminal of your monitor to the video output terminal of the external device using a VIDEO cable. AUDIO OUT Headphone/External speaker output termi- nal. HDMI IN Connect the HDMI terminal at the back of your PDP Display to the HDMI terminal of your digital output device using a HDMI ca- ble.
Kensington Lock The Kensington Lock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may differ from the illustra- tion depending on the manufacturer.
POWER OFF Number Buttons DEL / GUIDE button - VOL + SOURCE D.MENU TOOLS Up-Down Left-Right buttons INFO COLOR BUTTONS TTX/MIX MTS/DUAL ENTER/PRE-CH MUTE CH/P TV MENU RETURN EXIT MagicInfo 1. POWER Turns the product On. 2. OFF Turns the product Off. 3.
9. Up-Down Left-Right but- tons Moves from one menu item to another horizontally, vertically or adjusts selected menu values. 10. INFO Current picture information is displayed on the upper left corner of the screen. 11. COLOR BUTTONS Press to add or delete channels and to store channels to the favorite channel list in the “Channel List” menu.
20. EXIT Exits from the menu screen. 21. MagicInfo MagicInfo Quick Launch Button. Note This button is disabled for products that do not support MagicInfo . Mechanical Layout(P50HP, P50HP-2) Mechanical Layout PDP Display Head Installation VESA Bracket • When installing VESA, make sure to comply with the international VESA standards.
• At least 2 persons are needed in order to move the PDP Display. • SAMSUNG is not responsible for any product damage or any injury caused by installation at customer's discretion. Dimensions Notice For securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12 mm length.
Wall Bracket Assembly Note There are two hinges(left and right). Use the correct one. 1. Insert and tighten the Captive Screw in the direction of the arrow. When done, mount the wall bracket on the wall. A - Captive Screw B - Wall Bracket C - Hinge (Left) D - Hinge (Right) 2.
of the brackets and hinge holes to the corresponding anchor holes and insert and tighten the 11 screws A. To mount the product on the wall bracket The shape of the product may vary depending on the model. (The assemblies of the plastic hanger and the screw are the same) 1.
4. Remove safety pin (3) and insert the 4 product holders into the corresponding bracket holes (1). Then place the product(2) so that it is firmly fixed to the bracket. Make sure to re-insert and tighten the safety pin (3) to securely hold the product to the bracket.
Make sure to use the top center, and not the left or the right side of the product to adjust the angle. Mechanical Layout(P63FP, P63FP-2) Mechanical Layout PDP Display Head Installation VESA Bracket • When installing VESA, make sure to comply with the international VESA standards.
• Purchasing VESA Bracket and Installation Information : Please contact your nearest SAMSUNG Distributor to place an order. After your order is placed, installation profes- sionals will visit you and install the bracket. • At least 2 persons are needed in order to move the PDP Display.
Wall Bracket Assembly Note There are two hinges(left and right). Use the correct one. 1. Insert and tighten the Captive Screw in the direction of the arrow. When done, mount the wall bracket on the wall. A - Captive Screw B - Wall Bracket C - Hinge (Left) D - Hinge (Right) 2.
of the brackets and hinge holes to the corresponding anchor holes and insert and tighten the 11 screws A. To mount the product on the wall bracket The shape of the product may vary depending on the model. (The assemblies of the plastic hanger and the screw are the same) 1.
4. Remove safety pin (3) and insert the 4 product holders into the corresponding bracket holes (1). Then place the product(2) so that it is firmly fixed to the bracket. Make sure to re-insert and tighten the safety pin (3) to securely hold the product to the bracket.
Make sure to use the top center, and not the left or the right side of the product to adjust the angle. Introduction 28.
Connections Connecting a Computer There are several ways to connect the computer to the monitor. Choose one from the following options. Using the D-sub (Analog) connector on the video card. • Connect the D-sub to the 15-pin, [RGB IN] port on the back of your PDP Display and the 15 pin D-sub Port on the computer.
Using the HDMI (digital) output on the graphics card. • Connect the [HDMI IN] port on the PDP Display to the HDMI port on the PC using the HDMI cable. Note When the HDMI cable to the PC, ensure that you select HDMI from both the Source List and Edit Name before selecting PC or DVI device so that normal PC screen and sound can be outputted.
Connect the audio cable for your PDP Display to the audio port on the back of the PDP Display. Connect the power cord for your PDP Display to the power port on the back of the PDP Display. . Note • Turn on both your computer and the PDP Display. • Contact a local SAMSUNG Electronics Service Center to buy optional items.
1. Connect an audio cable to the audio output port on the external device and [AV/COM- PONENT AUDIO IN[R-AUDIO-L]] port on the monitor, and connect the video output port on the external device to the [AV IN [VIDEO]] port on the monitor. 2. Play the DVD, VCR or Camcorder with a DVD disc or tape inserted.
Connecting the BNC to BNC cable 1. Connect the [BNC/COMPONENT IN [R/P R , G/Y, B/P B ]] ports on the monitor to the BNC port on the external device using the BNC to BNC cable. 2. Select BNC using the SOURCE button on the front of the PDP Display or on the remote control.
Connecting Using a HDMI Cable 1. Connect input devices such as a Blu-Ray/DVD player to the [HDMI IN] terminal of the PDP Display using an HDMI cable. 2. Select HDMI using the SOURCE button on the front of the PDP Display or on the remote control. Note In HDMI mode, only PCM format audio is supported.
2. Connect the red and white jacks of an RCA to stereo (for PC) cable to the same colored audio output terminals of the digital output device, and connect the opposite jack to the [DVI / RGB AUDIO IN] terminal of the PDP Display. 3. Select HDMI using the SOURCE button on the front of the PDP Display or on the remote control.
Connecting a DTV Set Top (Cable/Satellite) Box 1. Connect a Component cable between the [BNC/COMPONENT IN [R/P R , G/Y, B/P B ]] port on the PDP Display and the P R , Y, P B jacks on the Set Top Box. 2. Connect a set of audio cables between the [AV COMPONENT AUDIO IN [R-AUDIO-L]] on the PDP Display and the AUDIO OUT jacks on the Set Top Box.
Using the Software MDC Installation 1. Insert the installation CD into the CD-ROM drive. 2. Click the Serial MDC installation program. Note If the screen for installing the software does not appear, install it using the Serial MDC execution file in the MDC folder of the CD-ROM.
Installation Problems The installation of MDC can be affected by such factors as the video card, motherboard and the network environment. Uninstall The MDC program can be removed only by using the "Add or Remove Programs" option of the Windows ® Control Panel.
Introduction A Multiple Display Control (MD C) is an application allowi ng various displays to be easily and simultaneously operated on a PC. RS-232C, a standard of serial communic ation, is used for the commu nication between a PC and a display.
Main Icons All Remote control Selection Buttons Safety Lock Refresh Port Selection Display Selection Lamp Control Info Grid Option... Control Tools Dropdown Selectors OSD Display 1. Use the main icons to switch into each screen. 2. Allows you to enable or disabl e the remote control signal receiving function of the display unit.
14. Switches the OSD function On/O ff. - May not be supported depending on the product. <Note> The remote control Enable /Disable function operate s whether or not the power is On/Off, and this applies to all displays connected to the MDC.
Info Grid shows some basic i nform ation necessary to Power Control. 1) (Power Status) 2) Input 3) Image Size 4) On Timer 5) Off Timer 2. Selects displays you want to adjust using the Select button or checkboxes.
Power Control allows controlling some of the functions of the selected display. 1) Power On/Off - T urns the power of the selected display On/Off. 2) Volume - Controls the vo lume level of the selected display. It receives the volume value of the sele cted disp lay from the sets and displays it in the slider.
1) Source OSD - Sets whether the Source OSD will be displaye d to indicate when the Source is changed. 2) Not Optimum Mode OSD - Sets whether the Optimum Mode OSD will be displayed to indicate if the curren t mode is not supported. 3) No Signal OSD - Sets whether the No Signal OSD will be disp layed to indicate when there is no signal.
• PC Mode Info Grid shows some basic i nformation necessary to Input Source Control. 1) PC.
- Changes the Input Source of the selected display to PC. 2) BNC - Changes the Input Source of the selected display to BNC. 3) DVI - Changes the Input Source of th e se lec ted displa y to DV I. 4) TV -C h a n g es the Input Source of the selected dis play to TV.
Info Grid shows some basic i nformati on necessary to Im age Size Control. 1) ( Power Status) - Shows the power status of the current display. 2) Image Size - Shows the current Image Size of the display in use. 3) Input - Info Grid displays only the displays w hose Input Source is PC, B NC, DVI and DP.
Info Grid shows some basic i nformati on necessary to Im age Size Control. 1) To adjust Image Size in TV, AV, S-Video, Component, HDMI1, HDMI2 or DTV mode , click th e Video Source tab. Select the display you want to adjust by using the Select button or by checking the checkbox.
Info Grid shows some basic i nform ation necessary to Time Control. 1) Set clock - Set the current time for the selected display (PC Time). - To change the current time, first change the PC Time. 2) Timer - Sets up Timer1, Timer2, Timer3 and Holiday Management.
1) On Time - Sets the time in hours, in minutes and as AM/PM for tu rning the selected monitor on. 2) Off Time - Sets the time in hours, in minutes and as AM/PM for turnin g the selected monitor off. 3) Volume - Selects the volume when the selected monitor is turned on.
1) Specifies the date. 2) Delete All - Deletes all of the holidays. 3) Add - Adds the specified date. 4) - Deletes the schedule in the selected li ne. The Holiday Management function can be turned on or off in the Timer setup menu. The Input source of MagicInfo wo rks only on MagicInfo model.
Info Grid shows some basic i nformati on necessary to PIP Size Control. 1) PIP Size - Shows the current PIP Size of the display in use. 2) OFF - Turns off the PIP of the selected di splay. 3) Large - Turns on the PIP of the selected display and changes the size to Large.
Info Grid shows s ome basic information necessary to PIP Source Control. 1) PIP Source - PIP Source can be controlled w ith turning on the LCD Display power. 2) PC - Changes the source of the PIP of the selected display to PC. 3) BNC - Changes the source of the PIP of the selected display to BNC.
Settings Picture 1. Click Settings of the main icons an d the Settings Control screen appears. Basic information required to adjust the Picture is displaye d in the main menu.
-A d j usts the Color Temp for the selected display. 9) Brightness Sensor -A d j usts the Bri g htness Sensor for the selected display. 10) Dynamic Contrast -A d j usts the Dynamic Contrast for the selected display. HDMI2 may not be supported depending on the pr oduct.
3) Brightness -A d j usts Bri g htness for the selected display. 4) Red -A d j usts red Color of the selected display. - Available only for NT. 5) Green -A d j usts g reen Color of the selected display. - Available only for NT. 6) Blue -A d j usts blue Color of the selected display.
Basic information required to adjust Audio is displayed in the display window. Settings fo r the corresponding SET will be imported and displayed on the slider if a display ID is selected, and the default setti ngs will be displayed if all display IDs are selected by clicking Al l an d Select.
Info Grid shows some basic i nformati on necessary to Settings Control. 1) Image Lock - Available only for PC, BNC. 2) Coarse - Adjusts Coarse of the selected display. 3) Fine - Adjusts Fine of the selected display. 4) Position - Adjusts Position of the selected display.
An "Info Grid" showing several basic data items appears. 1) Maintenance - Allows the Maintenanc e Control f unction for all input sources. 2) Lamp Control - Automatically adjusts the backlight of th e selected display at a specified time. T he Manual Lamp Control automatically turns o ff if you ad j ust usin g the Auto Lamp Control.
1) Scroll - This function is used to remove the afterimages that oc cur when a still screen is displayed on the selected display for a long time. 2) Pixel Shift - This allows the screen to be moved finely at the specified time interval.
1) Video Wall - A Video Wall is a set of video screens that are con nected together, so that each screen shows a part of the whole picture or so that the same picture is repeated on each screen. 2) Video Wall Control - Video Wall properti es can be configured.
1) On / Off - T urns on/off the Video Wall function of the s elected display. 2) Format - T he format can be selected to see a divided screen. z Full z Natural 3) Video Wall (Screen divider) - The screen can be divided into. You can select a number of screens wi th a different layout when dividing.
The Input source of TV works only on TV model. The Maintenance Control function is available only for the displays where the power status is ON. Troubleshooting 1. The display you wish to c ontrol does not appear on the Power Control Inf o Grid - Check the connection of RS232C.
Adjusting the PDP Display Input Available Modes • PC / DVI / BNC • AV • HDMI • MagicInfo • Component Note • MagicInfo can only be enabled when a network box is connected. • The HDMI port and network box cannot be connected at the same time.
Name the input device connected to the input jacks to make your input source selection easier. VCR / DVD / Cable STB / HD STB / Satellite STB / AV Receiver / DVD Receiver / Game / Camcorder / DVD Combo / DHR / PC Note • When connecting a PC to the HDMI or DVI terminal, set Edit Name to PC.
MagicBright is a new feature providing the optimum viewing environment depending on the contents of the image you are watching. Currently four different modes are available: Enter- tain , Internet , Text and Custom . Each mode has its own pre-configured brightness value.
Brightness MENU → → ENTER → → → ENTER → → → ENTER → → , → ENTER Adjusts the Brightness. Sharpness MENU → → ENTER → → → ENTER → → → → ENTER → → , → ENTER Adjusts the Sharpness. Color Tone MENU → → ENTER → → → → ENTER → → , → ENTER The color tones can be changed.
Note If you adjust the picture by using the Color Control function, Color Tone will turn to the Cus- tom mode. Red MENU → → ENTER → → → → → ENTER → → ENTER → → , → ENTER Green .
Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu. Fine MENU → → ENTER → → → → → → ENTER → → → ENTER → → , → ENTER Removes noise such as horizontal stripes.
Selects either On or Off with the signal Balance . Signal Control MENU → → ENTER → → → → → → → → ENTER → → → ENTER → 1. R-Gain MENU → → ENTER → → → → → → → → ENTER → → → ENTER → → ENTER → → , → ENTER 2.
6. B-Offset MENU → → ENTER → → → → → → → → ENTER → → → ENTER → → → → → → → ENTER → → , → ENTER Size MENU → → ENTER → → → → → → → → → ENTER → → , → ENTER The Size can be switched.
The PDP Display has four automatic picture settings (" Dynamic ", " Standard ", " Movie " and " Custom ") that are preset at the factory. Dynamic , Standard , Movie , or Custom can be activated. 1. Dynamic 2. Standard 3.
Color MENU → → ENTER → → → ENTER → → → → → ENTER → → , → ENTER Adjusts the picture Color. Tint MENU → → ENTER → → → ENTER → → → → → → ENTER → → , → ENTER Adds a natural tone to the display. Color Tone MENU → → ENTER → → → → ENTER → → , → ENTER The color tones can be changed.
Note This function is only enabled if the Color Tone is set to Off . Size MENU → → ENTER → → → → → → ENTER → → , → ENTER The Size can be switched. 1. 16:9 - Sets the picture to 16:9 wide mode. 2. Zoom 1 - Magnifies the size of the picture on the screen.
1. Off 2. On Note Digital NR function is not available for all resolutions. Film Mode MENU → → ENTER → → → → → → → → ENTER → → , → ENTER The Film Mode feature offers you a theater-quality viewing experience. Film Mode is supported in AV, Component (480i / 1080i) and HDMI (480i / 1080i).
The PDP Display has a built-in high fidelity stereo amplifier. 1. Standard Selects Standard for the standard factory settings. 2. Music Selects Music when watching music videos or concerts. 3. Movie Selects Movie when viewing movies. 4. Speech Selects Speech when watching a show that is mostly dialogue (i.
Emphasizes high frequency audio. Balance MENU → → → ENTER → → → ENTER → →→→ ENTER → → , → ENTER Allows you to Adjusts the sound balance between the left and right speakers. Auto Volume MENU → → → ENTER → → → → ENTER → → , → ENTER Reduces the difference in volume control between broadcasters.
• AV • HDMI • MagicInfo • Component Note • MagicInfo can only be enabled when a network box is connected. • The HDMI port and network box cannot be connected at the same time. Language MENU → → → → ENTER → → ENTER → → , → ENTER You can choose one of 13 languages.
Sleep Timer MENU → → → → ENTER → → → ENTER → → → ENTER → → , → ENTER Turns the PDP Display off automatically at certain times.
MENU → → → → ENTER → → → ENTER → → → → → → → ENTER → [ Holiday Management ] → ENTER → [ Add ] → , / , → ENTER You can register holidays.
Menu Transparency MENU → → → → ENTER → → → → ENTER → → , → ENTER Change the transparency of the background of the OSD. 1. High 2. Medium 3. Low 4. Opaque Safety Lock Change PIN MENU → → → → ENTER → → → → → ENTER → → ENTER → → [0∼9] → [0∼9] → [0∼9] → [0∼9] The password can be changed.
This is the function that locks the OSD in order to keep the current settings or to prevent others from adjusting the settings. Energy Saving MENU → → → → ENTER → → → → → → ENTER → → , → ENTER This feature adjusts the power consumption of the unit in order to save energy.
Note When Video Wall is running, the Auto Adjustment , Image Lock , and Size functions are not available. Video Wall does not operate in MagicInfo mode. Video Wall MENU → → → → ENTER → → → → → → → → ENTER → → ENTER → → , → ENTER Turns Off/On the Video Wall function of the selected display Off/On.
→ , → ENTER Sets how many parts the screen should be divided horizontally. Five adjustment levels: 1, 2, 3, 4, and 5. Vertical MENU → → → → ENTER → → → → → → → → ENTER → → → → → ENTER → → , → ENTER Sets how many parts the screen should be divided vertically.
Safety Screen The Safety Screen function is used to prevent afterimages that may appear when a still picture is displayed on the screen over a long time. • The Safety Screen function scrolls the screen for the specified period of time. • This function is not available when the power is turned off.
Sets how many pixels the screen moves vertically. Five adjustment levels: 0, 1, 2, 3, and 4. Time MENU → → → → ENTER → → → → → → → → → ENTER → → ENTER → → → → → ENTER → → , → ENTER Set the time interval for performing the horizontal or vertical movement, respectively.
You can change the Safety Screen Type. 1. Scroll 2. Bar 3. Eraser 4. All White 5. Pattern Period MENU → → → → ENTER → → → → → → → → → ENTER → → → ENTER → → → → ENTER → → , → ENTER Use this function to set the execution period for each mode set in the timer.
• Mode - All White , Pattern : 1, 5, 10, 20 30 min Scroll MENU → → → → ENTER → → → → → → → → → ENTER → → → → ENTER → This function prevents after-images on the screen by moving all the pixels on the PDP ac- cording to a pattern.
This function prevents after-images on the screen by changing the color of pixels to white. Use this function when there are remaining after-images or symbols on the screen, especially when you displayed a still image on the screen for a long time.
3. 1280 x 768 4. 1360 x 768 5. 1366 x 768 Note Selecting the menu is only allowed when the graphics resolution is set to 1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1360 x 768 @ 60Hz or 1366 x 768 @ 60Hz.
MENU → → → → ENTER → → → → → → → → → → → → → ENTER → Image Reset MENU → → → → ENTER → → → → → → → → → → → → → ENTER → → ENTER → → , → ENTER Note Available in PC mode only The Reset function is not available when Video Wall is On .
• Component Note • MagicInfo can only be enabled when a network box is connected. • The HDMI port and network box cannot be connected at the same time. Multi Control Assigns an individual ID to the SET. MENU → → → → → ENTER → → ENTER → , → [0~9] • ID Setup Assigns distinctive IDs to the SET.
• For MagicInfo in Device mode, moving external devices while booting may cause errors. Set up external devices only if the PDP Display turns on. • Do not unplug the LAN cable used for the network (ex: video display). Otherwise, the program (MagicInfo) may stop.
You can select an Application to be executed in your computer when Windows starts. 2. Select TCP/IP - step 2 In step 2 of MagicInfo Setup Wizard, you don’t have to go to Network Setting on the desktop to make your settings for TCP/IP. You just do that at step 2 of MagicInfo installation.
When using multiple languages, you can choose and set a specific language among them. 4. Select Screen Type - step 4 You can select which rotation type will be applied to your device.
Shows the settings that have been selected by the user. Note If the MagicInfo icon is not displayed on the notification area, double click the MagicInfo icon on the window desktop.
Troubleshooting Self-Test Feature Check Note Check the following items yourself before calling for assistance. Contact a Service Center for problems that you cannot solve by yourself. Self-Test Feature Check 1. Turn off both your computer and the PDP Display.
• Do not use benzene, thinner or other flammable sub- stances, or a wet cloth. 2) Maintaining the Flat Panel Display Screen. Clean with a soft cloth (cotton flannel) smoothly. • Never use acetone, benzene or thinner. (They may cause flaws or deformation of the screen surface.
A: Check if the signal cable between the computer and the PDP Display is securely con- nected. (Refer to Connecting a Computer) Problems related to the Screen Note Problems related to the PDP Display screen and their solutions are listed. Q: The screen is blank and the power indicator is off.
Q: The screen color is inconsistent. A: Adjust color using Custom under OSD Color Adjustment menu. Q: The color image is distorted by dark shadows. A: Adjust color using Custom under OSD Color Adjustment menu. Q: The color white is poor. A: Adjust color using Custom under OSD Color Adjustment menu.
A: Check if the batteries are empty. A: Check if the power is on. A: Check if the power cord is securely connected. A: Check if a special fluorescent or neon lamp is on in the vicinity. Q & A Q: How can I change the frequency? A: The frequency can be changed by reconfiguring the video card.
Note Before calling for assistance, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the In- formation section or contact your dealer.
Specifications General General Model Name SyncMaster P50HP, P50HP-2 SyncMaster P63FP, P63FP-2 PDP Panel Size SyncMaster P50HP, P50HP-2 50 " Diagonal (126 cm) SyncMaster P63FP, P63FP-2 63 " Diagonal (160 cm) Display area SyncMaster P50HP, P50HP-2 1105.
Maximum Pixel Clock SyncMaster 165MHz (Analog,Digital) Power Supply AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz Signal connectors DVI-D In/Out(Can connect up to 10 PDP display units.), D-sub, AV(Composite, CVBS), HDMI, RS232C In/Out PC Audio In, Audio In(Stereo), Audio Out(Stereo) Dimensions (W x H x D) / Weight SyncMaster 1204.
Note Design and specifications are subject to change without prior notice. Class B (Information Communication equipment for residential use) This device is registered for EMC requirements for home use (Class B). It can be used in all areas. (Class B equipment emits less electromagnetic waves than Class A equipment.
Display Mode Horizontal Frequency (kHz) Vertical Fre- quency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 640 x 350 31.469 70.086 25.175 +/- IBM, 640 x 480 31.469 59.940 25.175 -/- IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.
Information For Better Display Adjust the computer resolution and screen injection rate (refresh rate) on the computer as described below to enjoy the best picture quality. You can have an uneven picture quality on screen if the best picture quality is not provided for PDP.
Power Off, Screen Saver, or Power Save Mode • Turn the power off for 4 hours after 20 hours in use • Turn the power off for 2 hours after 12 hours in use • Set the Monitor to power off with the PC Display Properties Power Scheme. • Use a Screen saver if possible - Screen saver in one color or a moving image is recommended.
• Use Bright colors with little difference in luminance. - Cycle : Change the characters color and background color every 30 minutes • Every 30 minutes, change the characters with movement. • All area display Moving image together with Logo periodically.
Note ( Please check CD's User Guide at "OSD Function", some model's will not availa- ble. ) Apply the Screen Erasing function on Product • Apply the Screen Erasing function - Sym.
Appendix Contact SAMSUNG WORLDWIDE Note If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. North America U.S.A 1-800-SAMSUNG(726-7864) http://www.samsung.com CANADA 1-800-SAMSUNG(726-7864) http://www.
Europe EIRE 0818 717100 http://www.samsung.com ESTONIA 800-7267 http://www.samsung.com FINLAND 030 - 6227 515 http://www.samsung.com FRANCE 01 48 63 00 00 http://www.samsung.com GERMANY 01805 - SAMSUNG (726-7864, € 0,14/Min) http://www.samsung.com HUNGARY 06-80-SAMSUNG (726-7864) http://www.
Asia Pacific AUSTRALIA 1300 362 603 http://www.samsung.com CHINA 400-810-5858 010-6475 1880 http://www.samsung.com HONG KONG (852) 3698 - 4698 http://www.samsung.com/hk http://www.samsung.com/ hk_en/ INDIA 3030 8282 1800 110011 1800 3000 8282 1800 266 8282 http://www.
Vertical Frequency The screen must be redrawn several times per second in order to create and display an image for the user. The fre- quency of this repetition per second is called the Vertical Frequency or Refresh Rate. Unit: Hz Example: If the same light repeats itself 60 times per sec- ond, this is regarded as 60 Hz.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Eu- rope only from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
Appendix 91.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Samsung P63FP c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Samsung P63FP - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Samsung P63FP, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Samsung P63FP va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Samsung P63FP, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Samsung P63FP.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Samsung P63FP. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Samsung P63FP ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
