Manuel d'utilisation / d'entretien du produit DVDR120 du fabricant Samsung
Aller à la page of 98
Instruction Manual DVD-R120 www .samsung.com AK68-00683A-05 XAA-ENG AK68-00683A-04_Cover 2005.12.10 12:13 AM Page 1.
FCC NOTE (for U.S.A): This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits ar e designed to provide r easonable protection against harmful interfer ence in a residential installation.
English - 3 Important Safety Instructions Read these operating instructions carefully befor e using the unit. Follow all the safety instructions listed below . Keep these operating instructions handy for future refer ence. 1) Read these instructions. 2) Keep these instructions.
● Use a 700MB(80 minutes) CD-R/R W disc. If possible, do not use a 800MB(90 minutes) or above disc, as the disc may not play back. ● If the CD-R/R W disc was not recorded as a closed session, you may experience a delay in the early playback time, and all recor ded files may not play .
English - 5 G etting Started Do not use the following discs! ● LD, CD-G, CD-I, CD-ROM and DVD-ROM discs should not be used in this product. [Note] Disc types that can be played : CD/CD-R/CD-R W/MP3/JPEG/DVD-Video/DVD- RAM/DVD-R W/ DVD-R. DVD +R/+R W cannot record, but the finalized DVD +R/+R W can be played.
6 - English Getting Started Getting Started W ar ning .......................................................................2 Precaution ....................................................................3 Important Safety Instructions .............
English - 7 Locking(Protecting) a T itle .......................................74 Deleting a T itle .........................................................74 Deleting a Section of a T itle .....................................75 Advanced Editing (Play List) .
8 - English General Features High quality progressive scan Progr essive scanning provides high r esolution and flicker free video. The 10-bit 54-MHz DAC and 2D Y/C Separating Cir cuitry provides the highest video playback and recor ding quality . (See page 20.
English - 9 1) Be sur e to be familiar with Safety Instructions before using this product. (See pages 2~3) 2) If a pr oblem occurs, check for T roubleshooting.
10 - English Step 3 Recording There ar e two differ ent recor ding methods, Direct Recording and T imer Recording. T imer recor ding is classified as a Date : Once(mm/dd), Every Day , MON-SA T , Every SA T , etc.
English - 11 Front Panel Display 1. Lights when a disc is loaded. 2. Lights in the recor d mode. 3. Lights to indicate the timer recor d mode. 4. Lights when a -R/R W/RAM disc is loaded. 5. Displays the messages. 6. Lights in the progr essive scan mode.
12 - English 1. DIGIT AL AUDIO OUT(OPTICAL) Connects to an amplifier having a digital optical audio input jack. 2. DIGIT AL AUDIO OUT(COAXIAL) Connects to an amplifier having a digital coaxial audio input jack. 3. LINE AUDIO OUT Connects to the audio input of external equipment using audio cables.
English - 13 10. MENU Button Brings up the DVD recor der’ s setup menu. 11. ENTER/DIRECTION Buttons (UP/DOWN or LEFT/RIGHT Buttons) This button functions as a toggle switch. 12. REC MODE Button This will display the recor ding status. 13. REC Button Use to make a recor ding on DVD-RAM/-R W/-R discs.
14 - English A Quick Overview presented in this guide will give you enough information to start using the recor der . C onnecting & S etting Up Quick Overview Quick Overview .....................................................14 Step 1 : Connecting the Antenna cable .
English - 15 C onnecting & Setting UP Step 1: Connecting the Antenna Cable There ar e several ways to connect your DVD Recorder . Select one of the Antenna connections on the following pages. Antenna + DVD Recorder + TV : No Cable box Y ou can recor d non-scrambled channels by selecting the channel on the DVD Recorder .
16 - English C onnecting & Setting UP Antenna + Cable box + DVD Recorder + TV : Cable box with many scrambled channels Y ou can recor d channels by selecting the channel on the cable box. Y ou cannot record one channel while watching another channel.
English - 17 C onnecting & Setting UP Antenna + DVD Recorder + Cable box + TV : Cable box with a few scrambled channels Y ou can recor d non-scrambled channels by selecting the channel on the DVD Recorder . Y ou cannot record scrambled channels that requir e a cable box.
18 - English C onnecting & Setting UP Step 2 : Connecting the V ideo cable ● Y ou will enjoy regular quality images. ● Connect audio cables(white and red) between the AUDIO OUT jacks on the DVD Recorder and AUDIO IN jacks on TV(or A V amplifier).
English - 19 C onnecting & Setting UP Connecting to an S-Video input jack Connect an S-V ideo cable(not supplied) between the S-VIDEO OUT jack on DVD Recorder and S-VIDEO IN jack on your TV (or A V amplifier). ● Y ou will enjoy high quality images.
20 - English 1. Connect Component video cables(not supplied) between the COMPONENT OUT(Y ,P B ,P R ) jacks on DVD Recorder and COMPONENT IN(Y ,P B ,P R ) jacks on your TV (or A V amplifier). 2. If the TV connected supports Progr essive Scan, press the P .
English - 21 There ar e several ways to connect your DVD Recorder . Select one of the audio connections on the following pages. Step 3 : Connecting the Audio cable Connecting to your TV This connection will use your TV’ s speakers. C onnecting & Setting UP AK68-00683A-0v(14~35) 2005.
22 - English Connecting to a stereo amplifier with analog input jacks If your stereo amplifier only has AUDIO INPUT jacks(L and R), use the AUDIO OUT jacks.
English - 23 Connecting to an A V amplifier with a digital input jack If your A V amplifier has a Dolby Digital or DTS decoder and a digital input jack, use this connection. T o enjoy Dolby Digital or DTS sound, you will need to set up the audio settings.
24 - English C onnecting & Setting UP This allows you to connect your DVD Recorder to other external devices and view or r ecord their outputs. Step 4 : Connecting external devices ■ Y ou can also use the LINE IN 2 jacks on the front panel of the DVD Recor der .
English - 25 C onnecting & Setting UP Connecting a Camcorder to the LINE IN 2 jacks Y ou can also use the LINE IN 2 jacks on the front panel of the DVD Recor der . Y ou can recor d from connected equipment, such as a camcorder . When an input sour ce is inserted into LINE 2 while viewing TV , the input will be switched to LINE 2 automatically .
26 - English C onnecting & Setting UP Connecting a Camcorder to the DV IN jack If your camcorder has a DV output jack, connect it to the DV input jack of your DVD Recor der . ■ If the input is not selected automatically , press the INPUT button on the r emote to select proper input.
English - 27 Install Batteries in the Remote Control ● Open the battery cover on the back of the remote. ● Insert two AAA batteries. Make sure that the polarities (+ and -) are aligned corr ectly .
Before Play , T urn on your TV and switch the input selector on your TV so that the signal from the DVD Recor der appears on your TV screen. If you connected an external Audio System, turn on your Audio System and select AUX, CD or DVD.
English - 29 2. Clock Set This menu is used to set the current time. Y ou need to set the time to use timer recor ding. 1 W ith the unit in Stop mode/No Disc mode, press the MENU button. 2 Select Setup using the …† buttons, then press the ENTER or √ button.
30 - English 7 Select the sub menu(Clock Data CH, T ime Zone or Daylight Saving) using the …† buttons, then press the ENTER or √ button. Clock Data CH Select a channel that carries a time signal using the …† buttons then press the ENTER button.
3. Channel Set Y ou can set the Antenna/Cable TV settings automatically . 1 W ith the unit in Stop mode/No Disc mode, press the MENU button. 2 Select Setup using the …† buttons, then press the ENTER or √ button. 3 Select System using the …† buttons, then press the ENTER or √ button.
32 - English 6 Select Antenna using the …† buttons, then press the ENTER or √ button. 6 Select Antenna or Cable TV(depending on the hookup you chose) using the …† buttons, then press the ENTER or √ button. 7 Select Auto Channel Memory using the …† buttons, then press the ENTER or √ button.
English - 33 5 Select Channel Add/Delete using the …† buttons, then press the ENTER or √ button. 6 Use the …† or number buttons to select the channels you want to add or delete on the [Select channel] screen. Then, press the ENTER button. ● Using …† buttons for channel selection allows the user to add/delete one channel at a time.
34 - English Dynamic Compression This is only active when a Dolby Digital signal is detected. ● On : When Movie soundtracks are played at low volume or from smaller speakers, the system can apply appr opriate compression to make low-level content mor e intelligible and prevent dramatic passages fr om getting too loud.
English - 35 5 Use the …† buttons to select the desired item(4:3 Letter Box, 4:3 Pan-Scan or 16:9 W ide). Then press the ENTER or √ button. If you have a 4:3 standard TV ● 4:3 Letter Box : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen.
36 - English R ecording This unit can recor d on various types of discs. Before recor ding, read the following instructions and select the disc type according to your pr eference. Recordable discs This recor der can recor d on the following discs. DVD-RAM DVD-R W DVD-R ● DVD-R Ws and DVD-RAMs are rewritable.
English - 37 R ecording Unrecordable video V ideo with copy protection cannot be r ecorded on this DVD Recorder . When the DVD Recorder receives a copy guard signal while r ecording, r ecording stops and the following message appears on the screen.
R ecording 38 - English Recording the current TV program you are watching Check that the disc has enough available space for the recor ding. Adjust the recor ding picture quality mode (see page 37). 1 Press the OPEN/CLOSE button and place a recordable disc on the disc tray .
R ecording English - 39 To stop recording Press the STOP ( ) button to stop or finish a r ecording in progr ess. ● When using DVD-RAM/DVD-R W/DVD-R discs, the message ‘Updating the information of disc. Please wait for a moment’ is displayed. To pause recording Press the play/pause ( ) button to pause a r ecording in progr ess.
40 - English R ecording 5 Press the REC button. To stop recording Press the STOP ( ) button to stop or finish a r ecording in progr ess. ● When using DVD-RAM/DVD-R W/DVD-R discs, the message ‘Updating the information of disc.
English - 41 Copying from a Camcorder Check that the disc has enough available space for the recor ding. Adjust the recor ding mode. 1 Press the OPEN/CLOSE button, and place a recordable disc on the disc tray . 2 Press the OPEN/CLOSE button to close the disc tray .
42 - English R ecording Making a One T ouch Recording (OTR) Y ou can set the DVD-Recorder to r ecord in 30-minute increments by pr essing the REC button. 1 If you want to record a TV channel, use the CH( / ) buttons or number buttons to select a desired channel.
English - 43 R ecording ● Source: The video input sour ce (L1, L2), or the broadcasting channel you want to make a timer recor ding of. When selecting channels to be recor ded, the …† buttons on the remote contr ol can let you select only the channels that have been memorized during Auto Scan.
44 - English R ecording 3 Press the …† buttons to select Scheduled Record List, and then press the ENTER or √ button. 4 Press the …† buttons to select the number of the Scheduled Record List you want to edit, and then press the ENTER or √ button.
English - 45 R ecording 4 Press the …† buttons to select the number of the timer recording you want to delete, and then press the ENTER or √ button. The Edit and Delete items are displayed. 5 Press the …† buttons to select Delete, and then press the ENTER or √ button.
46 - English R ecording Recording the Scheduled Record List 1 When the start time set in the Scheduled Record List arrives, if the set is powered off, the set will be automatically powered on and starts recording. If the set is already power ed on, a message asking to confirm to proceed or cancel the timer recording appears.
English - 47 Read the following information before playing a disc. Both the DVD recor der and the discs are coded by region. These r egional codes must match in order for the disc to play . If the codes do not match, the disc will not play . The Region Number for this recor der is described on the rear panel of the r ecorder .
48 - English 2 Place a disc gently into the tray with the disc’ s label facing up. For DVD-RAM discs, insert the printed side facing up. 3 Press the OPEN/CLOSE button to close the disc tray . ● Y our DVD Recorder closes the disc tray and plays the disc automatically .
English - 49 1 During play , press the button on the remote contr ol. ● Y ou can scan the program in r everse. T o return to normal speed playback, press the button. ● When you press and hold the SEARCH button( ), playback is done at the default speed of 4X.
50 - English The ANYKEY function allows you to easily sear ch for a desired scene by accessing title, chapter , track, and time. Y ou can also change the subtitle and audio settings and set some features including Repeat, Angle, and Zoom. ● If you want to move to a title, a chapter or a track to find a desired scene.
English - 51 Using the REPEAT button Using the REPEAT button 1 Press the REPEA T button during playback. 2 Press the REPEA T button or press the …† buttons to select the T itle or Chapter you want to play repeatedly . Press the ENTER button. Chapter : Repeats the chapter that is playing.
52 - English Using the ANY KEY button Using the ANY KEY button 1 Press the ANY KEY button during playback. 2 Press the …† buttons to select Repeat and press the œ √ buttons to select the Title or Chapter you want to play repeatedly . 3 Press the ENTER button.
English - 53 Subtitle languages may not work depending on the disc type. This is only available during playback. Using the SUBTITLE button Using the SUBTITLE button 1 Press the SUBTITLE button during playback. 2 Press the SUBTITLE button or …† buttons to select the desired subtitle language.
54 - English Audio languages may not work depending on the disc type. This is only available during playback. Using the AUDIO button Using the AUDIO button 1 Press the AUDIO button during playback. 2 Press the AUDIO button or …† buttons to select the desired audio language.
English - 55 This feature lets you bookmark sections of a DVD or DVD-R/-R W(V mode), so you can quickly find them. 1 Press the MARKER button during playback. 2 Press the ENTER button when the desired scene appears. The number 1 is displayed and the scene is memorized.
56 - English 1 Press the MARKER button during playback. 2 Press the œ √ buttons to select a bookmarked scene. 3 Press the ENTER or button to start playing from the selected scene. 1 Press the MARKER button during playback. 2 Press the œ √ buttons to select a bookmarked scene.
English - 57 Each disc has a variety of menu functions available. 1 Insert an audio CD (CD-DA) into the disc tray . The audio CD menu appears and the tracks (songs) are played automatically . 2 -1 Press the …† buttons to select the track you want to hear , and then press the ENTER button or √ button.
58 - English 1. … … † † , 0~9: Selects a track (song). 2. √ √ : Plays the selected track (song). 3. ENTER button: Plays the selected track (song). 4. ( ) button: Plays the next track. 5. ( ) button: Returns to the beginning of the current track when pressed during playback.
English - 59 The Play Option can be used with an audio CD in the Play or Stop mode. 1 Press the ANY KEY button in the stop mode. Play Option will be highlighted. ● During Playback, Repeat Mode will be highlighted. 2 Select a desired play option (Normal, Random, Intro or Playlist) using the …† buttons.
60 - English Y ou can register a maximum of 30 tracks in the playlist. 1 Press the ANY KEY button in the stop mode. Play Option will be highlighted. 2 Select Playlist using the …† buttons, and then press the ENTER button. The Playlist screen will appear .
English - 61 Follow these instructions to play back a scene from the T itle List. Using the TITLE LIST button Using the TITLE LIST button 1 Press the TITLE LIST button. The T itle List screen is displayed. 2 Press the …† buttons to select an entry you want to play from T itle List, and then press the PLA Y( ) button.
62 - English 2 Press the …† buttons to select T itle List, and then press the ENTER or √ button twice. The T itle List screen is displayed. 3 Press the …† buttons to select T itle, and then press the ENTER or √ button. The Edit menu is displayed on the right.
English - 63 ! Playback screen for r ecorded entries. @ Information window for the selected entry: T itle name, recor ding date, recor ding time, lock status, recor ding mode # Recorded entry No. $ Recorded entry title % Recording length (i.e., the playing time) ^ T itle list edit items Play: Plays the selected entry .
64 - English For ease of use, we recommend that you set up the initial settings before using the pr oduct. 1 W ith the unit in Stop mode/No disc mode, press the MENU button on the remote contr ol. Menu items differ depending on the disc type. 2 Select Setup using the …† buttons, then press the ENTER or √ button.
English - 65 S ettings & Adjustments Clock Set (See page 29) Channel Set (See page 31) CM Skip T ime Setting When a program r ecorded on a DVD-RAM, a DVD-R W , or a DVD-R is played, the unit can be set to automatically skip a portion of the program corresponding to a CM(commer cial) Skip T ime set by the user .
66 - English S ettings & Adjustments EP Mode T ime Setting Y ou can set the EP (Extended Play) mode’ s time setting to 6 or 8 hours. 1 W ith a disc inserted and the unit in Stop mode, press the MENU button on the remote contr ol. 2 Select Setup using the …† buttons, then press the ENTER or √ button.
English - 67 S ettings & Adjustments 2 Select Setup using the …† buttons, then press the ENTER or √ button. 3 Select Language using the …† buttons, then press the ENTER or √ button. Language setup menu will be displayed. 4 Use the …† buttons to select the desired sub menu and press the ENTER or √ button.
68 - English S ettings & Adjustments 4 Select the sub menu(TV Aspect,…,3D Noise Reduction) using the …† buttons, then press the ENTER or √ button. TV Aspect: see page 35 Input Level Adjusts the level of the input signal. ● Darker : If you feel the screen is too light and you want to make the screen darker .
English - 69 S ettings & Adjustments Front Display Adjust the brightness of the unit’ s front panel display . ● Bright : Makes the Front Panel Display bright. ● Dim : Makes the Front Panel Display dim. ● Auto Dim : Makes the Front Panel Display dim automatically when playing a DVD.
70 - English S ettings & Adjustments 1 Select Rating Level using the …† buttons. 2 Press the ENTER or √ button. The rating level will be displayed. 3 Select Rating Level you want using the …† buttons, then press the ENTER or √ button. For example, if you select up to Level 6, discs that contain Level 7, 8 will not play .
English - 71 S ettings & Adjustments 1 Select Change Password using the …† buttons. 2 Press the ENTER or √ button. The 'Enter the password.' message will be displayed. 3 Enter the 4-digit password using the 0 to 9 buttons on the remote contr ol.
E diting 72 - English ● Title List A title is a section of recor ded video and audio. T itle List shows a list to help you select a title. Since the title list consists of the information on stream that is actually r ecorded, if one title is deleted, that title cannot be played again.
English - 73 Renaming(Labeling) a T itle Follow these instructions to rename a title list entry , i.e., to edit the title of a recor ded program. Using the TITLE LIST button Using the TITLE LIST button 1 Press the TITLE LIST button. The T itle List screen is displayed Using the MENU button ● Press the MENU button.
74 - English E diting Locking(Protecting) a T itle Follow these instructions to lock an entry to protect it from accidental deletion. Using the TITLE LIST button Using the TITLE LIST button 1 Press the TITLE LIST button. The T itle List screen is displayed Using the MENU button ● Press the MENU button.
English - 75 Deleting a Section of a T itle Follow these instructions to delete a section of a T itle List entry . Using the TITLE LIST button Using the TITLE LIST button 1 Press the TITLE LIST button. The T itle List screen is displayed Using the MENU button ● Press the MENU button.
76 - English E diting 4 Press the ENTER button at the starting point. The image and starting point time are displayed in the section deletion starting point window .
English - 77 5 Press the ENTER button at the end point. ● The image and end point time are displayed in the End window . ● The yellow-colored selection bar moves to the Make item. - To make a new playlist - 6 Press the …† buttons to select Make, and then press the ENTER button.
78 - English 3 Press the …† buttons to select Play , and then select the ENTER button. The playlist entries will be played. ● T o view the current status of the disc and progr ess of playback : Press the INFO button, and the information about the disc will appear .
English - 79 4 Enter the desired characters using the …† œ √ buttons. ● This function is the same as the Rename function in renaming the title list. (See page 73.) ● The maximum number of characters that can be entered is 31. All 31 characters can be displayed by pressing the INFO button.
80 - English E diting Editing a Scene for the Playlist Follow these instructions to edit scenes for a playlist. 1 W ith the unit in stop mode, press the PLA Y LIST button. The Edit Playlist screen is displayed. Using the MENU button ● Press the MENU button in the stop mode.
English - 81 7 Press the ENTER button at the end point of the scene. ● The image and ending point time are displayed in the End window . 8 Press the …† buttons to select Change, and then press the ENTER button. ● The scene you want to modify is changed with the selected section.
82 - English E diting 4 Press the …† œ √ buttons to select the scene you want to move (change the position), and then press the ENTER button. 5 Press the …† buttons to select Move, then press the ENTER button. ● A yellow selection window is displayed on the scene to be moved.
English - 83 7 Press the ENTER button at the end point of the scene. ● The image and time of the end point are displayed in the End window . ● T o cancel, press the …† buttons to select cancel and then press the ENTER button. 8 Press the …† buttons to select Add, and then press the ENTER button.
84 - English E diting 3 Press the …† buttons to select Delete, and then press the ENTER button. ● Y ou will be prompted with the delete confirmation message 'Do you want to delete?'. 4 Press the œ √ buttons to select Y es, and then press the ENTER button.
English - 85 4 Enter the desired characters using the …† œ √ buttons. ● This function is the same as the Rename function in renaming the title list. (See page 73.) ● The maximum number of characters that can be entered is 31. All 31 characters can be displayed by pressing the INFO button.
86 - English E diting Disc Protection Disc Protect allows you to pr otect your discs from being formatted or deleted due to unintended operations. 1 W ith the unit in Stop mode, press the MENU button on the remote contr ol. 2 Press the …† buttons to select Disc Manager , and then press the ENTER or √ button.
English - 87 2 Press the …† buttons to select Disc Manager , and then press the ENTER or √ button. 3 Press the …† button to select Delete All T itle Lists, and then press the ENTER or √ button. ● Y ou will be prompted with the confirmation message 'Do you want to delete all title lists?'.
88 - English Finalizing a disc After you recor d titles onto a DVD-R W/DVD-R disc with your DVD recor der , it needs to be finalized before it can be played back on external devices. 1 W ith the unit in Stop mode, press the MENU button on the remote contr ol.
English - 89 4 Press the œ √ buttons to select Y es, and then press the ENTER button. The disc is unfinalized. ■ A DVD-R W can be finalized or unfinalized in V ideo mode.
90 - English A dditional Information Recording is possible for DVD- RAM/DVD-R W/DVD-R discs only . If a program is copy pr otected, it cannot be recor ded. Checkpoint 1 I pressed the REC button but ther e is no response. If your product malfunctions, go thr ough the check- points below before contacting a Samsung authorized service center .
English - 91 A dditional Information Playback Check whether the disc is inserted cor- rectly with the label facing up. Check the regional code of the DVD disc. This DVD recor der cannot play some types of discs. (See page 5.) Checkpoint 1 Checkpoint 2 Checkpoint 3 Cannot play the disc.
92 - English A dditional Information Sound Video Checkpoint 1 Checkpoint 2 Checkpoint 3 Checkpoint 4 No sound. Are you watching a pr ogram in slow or skip mode? If you are playing a pr ogram at a speed other than normal speed, sound will not be heard.
English - 93 A dditional Information Remote Control Unit Read the table of contents and then find and read the section describing your problem, and follow the instructions given. T urn your DVD recorder off and on. If the problem still persists, contact a nearby Samsung service center .
94 - English A dditional Information Problems and Solutions [Display error Message] Explanation / Solution Y ou can’t r ecord the video since it is protected by copyright. Disc you are using is protected. T o recor d on this disc or use this function, cancel the disc protection function.
English - 95 A dditional Information Problems and Solutions [Display error Message] Explanation / Solution Y ou can’t use the disc because it contains err ors from previous recor dings. Use the disc after formatting. When operating, errors happen.
96 - English A dditional Information Specifications Power requir ements Power consumption W eight Dimensions Operating temp. Other conditions V ideo (1,2) Audio(1,2) DV Input Receivable Channels Audio V ideo Picture Compr ession format Audio Compression format Recording Quality Audio Frequency Response 120V AC, 60Hz 35 W atts 8.
English - 97 W arranty This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC. (SAM- SUNG) and delivered new , in the original carton to the original consumer pur .
Samsung Electronics America, Inc. 105 Challenger Road Ridgefield Park, NJ 07660-051 1 1-800-SAMSUNG (7267864) www .samsung.com US AK68-00683A-05 XAA-ENG Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Samsung DVDR120 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Samsung DVDR120 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Samsung DVDR120, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Samsung DVDR120 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Samsung DVDR120, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Samsung DVDR120.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Samsung DVDR120. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Samsung DVDR120 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
