Manuel d'utilisation / d'entretien du produit SGS395X du fabricant Roper
Aller à la page of 16
Thank you for choosing a Roper appliance. This Use and Care Guide will help you operate and maintain your new, quafity- built Roper range. Keep this Use and Care Guide in a safe place for future reference. Complete and mail the Product Registration Card.
Important Safety Instructions Gas ranges have been thoroughly tested for safe and efficient operation. However, as with any appliance, there are specific mstallatlon and safety precautions which must be followed to ensure safe and satisfactory operation.
16. Grease is flammable and should be handled carefully. Let fat cool before attempting to handle it. DO NOT allow grease to mllect around cooktop or in vents. Wipe spill-overs immediately. 17. DO NOT use water on grease fires. Never pick up a flaming pan.
Using Your Range Oven indicator Left front Electronic clocWTv¶inute Surface burner Clean indicator Setting the electronic clock The electronic clock is a digital clock with a Minute Timer and automatic control cooking cycle. Time-of-day, Minute Timer times and cook times are set by pushing command buttons on either side of the display.
Using the oven Baking 1. Position the rack(s) properly before turning on the oven. To change rack position, pull rack out to stop, raise front edge and lift out.
Using the Cook Timer The automatic Cook Timer is designed to turn the oven on and off at times you set, even when you are not around. Automatic baking is ideal for foods which do not require a preheated oven such as meats and casseroles. Do not use the automatic cycle for cakes, cookies, etc.
The storage drawer The storage drawer IS for storing pots and pans. The drawer can be removed to make it easier to clean under the range, and to check for installation of the anti- tip bracket(s). Use care when handling the drawer. Removing the storage drawer: I---w Lever 1.
Caring For Your Range Bum, Electrical Shock, Fire And Explosion Hazard l Make sure all controls are OFF and the range is cool before cleaning. m Do not use oven cleaners, bleach 01 rust removers. m Do not use gasoline or other flammable liquids or vapors to clean this or any other appliance.
‘Using the Self-Cleaning cycle The Self-Cleaning cycle uses very high heat to burn away ~011. Before you start, make sure you understand exactly how to use the Self-Cleaning cycle safely. Before you start Hand clean bame Hand clean door around edge I Do not hand clean seal 1.
Setting the controls To start the Self-Cleaning cycle immediately: 1. Set the Oven Selector to CLEAN. 2. Make sure the clock has the correct time-of-day. (See “Setting the electronic clock” on page 4.) 3. Move the Lock Lever all the way to the right - the Clean position.
PART Exterior surfaces WHAT TO USE Warm, soapy water and a soft cloth. Non-abrasive plastic scouring pad for heavily-soiled areas. HOW TO CLEAN l Wipe off regularly when range is cool. ADO not allow food containing acids (such as vinegar, tomato or lemon juice) to remain on surface.
The oven light The oven light will come on when you open the oven door. To turn the light on when the oven door is closed, push the Oven Light Switch on the control panel.
Before You Call For Service If you are having an operating problem, check the chart to see what the cause might be before you call for assistance. OPERATING PROBLEM Nothing operates. Oven will not operate. CHECK IF . Range is properly connected to gas and electrical supplies.
Lf the Self-Cleaning cycle will not operate. Cooking results a.re not what you expected. The oven temperature seems too low or too high. CHECK IF .YOU pushed in knob(s) before trying to turn. . The Oven Selector is set to CLEAN. . A delay start time is set.
THIS PAGE INTENTIONALLY LEFT BLANK.
LIMITED WARRANTY - Home Appliances LENGTH OF WARRANTY (From date of purchase) FULL ONE YEAR WARRANTY PRODUCTS COVERED All Roper Appliances FULL FIVE YEAR WARRANTY Refrigerators Freezers Air Conditione.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Roper SGS395X c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Roper SGS395X - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Roper SGS395X, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Roper SGS395X va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Roper SGS395X, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Roper SGS395X.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Roper SGS395X. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Roper SGS395X ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
