Manuel d'utilisation / d'entretien du produit FRS-3000PK du fabricant Audiovox
Aller à la page of 28
FRS/W FRS/W FRS/W FRS/W FRS/W eat eat eat eat eat her her her her her Model: Model: Model: Model: Model: FRS-3000PK FRS-3000PK FRS-3000PK FRS-3000PK FRS-3000PK Mobile Rechar Mobile Rechar Mobile Recha.
NEVER A TTEMPT TO CHARGE ALKALINE OR DRY CELL BA TTERIES, AS BA TTERIES MA Y BURST CAUSING PERSONAL INJURY AND DAMAGE TO THE PRODUCT . WHEN RECHARGING NICKEL MET AL HYDRIDE (Ni-MH) BA TTERIES IN THE HAND- HELD UNIT USING THE AUDIOVOX CHARGING BASE ST A TION, USE ONL Y AUDIOVOX APPROVED RECHARGEABLE BA TTERIES.
3 Model FRS-3000PK Mobile and Base Station T ransceivers The mobile (hand-held) transceiver , when equipped with NiMH rechargable batteries, can be recharged when placed in the fixed base station trans- ceiver cradle, which also acts as a desk-top charger .
4 1. Battery Door 2. Monitor/Backlight Button 3. Detachable Carry Clip 4. Push-T o-T alk (PTT) Button 5. Antenna 6. External Speaker(SPK)/Micro- phone (MIC) Jacks 7. Liquid Crystal Display (LCD) 8. Combination Transmit Indi- cator (Red)/Receive and Moni- tor Indicator (Green) Model FRS-3000PK Mobile T ransceiver Controls and Indicators 9.
1. FRS Mobile Unit Battery Charge Contacts 2. Built-in Speaker 3. Push-T o-T alk (PTT) Button 4. MODE Button 5. Antenna (Retractable) 6. Liquid Crystal Display (LCD) 7. DC 9V Charger Input Jack 8. Combination Transmit Indi- cator (Red)/Receive and Moni- tor Indicator (Green) Model FRS-3000PK Base Unit Controls and Indicators 9 .
6 Model FRS-3000 Mobile T ransceiver Display 1. Button (Key) T one Beep On/Off Indicator: This icon appears when the beep key tone is on, and disappears when tone is not in use. 1. Beep T one Indicator: Icon appears when beep button confirmation tone is selected; icon disappears when tone is off.
7 10.Caller Identification (ID) Indicator: This indication appears when you select a caller identification code (between 1 and 10). ID selection operates in conjunction with the small segment display , and can also be used to identify a calling party in the monitor mode.
3. Key Lock Indicator: Icon appears when keypad is locked. This function disables keys such as channel up/down and MODE. 4. Signal Strength Indicator: Icon appears when a signal is being received. The icon consists of three bars to indicate the received signal level.
Powering the transceiver: Y our FRS-3000PK hand-held mobile radio transceiver operates on four AAA batteries. Alkaline batteries will provide slightly better performance than the supplied rechargeable batteries.
10 3. V arious Brands o f Rechargeable Batteries - Use of the Base S tation Desk-T op charging feature with other brands of recharge- able batteries is not recommended, as battery charging times will vary with different brands of batteries. Refer to the manufacturer’s instructions for charging other brands of batteries.
11 The following guidelines will improve performance and provide longer operating times for the FRS-3000Pk mobile transceiver: 1. Do not mix old and new batteries. 2. The use of alkaline-type batteries is recommended to provide the longest operating time.
12 Base St ation T ransceiver Charging Setup For the Mobile T ransceiver When the mobile transceiver is equipped with rechargeable NiMH batteries (supplied), they may be charged using the base station setup as follows: 1. Position the hand-held transceiver in the base station cradle as shown.
Controls: Power On/Off (14, *9) Button Press and hold the power on/off button ( ) for at least 2 seconds. Y ou will hear a confirming melody to indicate the unit is on.
14 Monitor/Display Backlight Button (2, *10) This button is used to check activity on the current frequency before transmitting. Check activity by pressing the Monitor (M) Button longer than 2 seconds; the icon will apppear on the display and you will hear static if frequency is clear .
15 Up Channel/V olume Button (10, *12) In the standby mode, pressing this button will increment the listening volume. When in function edit mode this button will be used to adjust the unit’s settings. Down Channel/V olume Button (13, *12) In the standby mode, pressing this button will decrement the listening volume.
16 - Press and hold the PTT button (4, *3) to transmit, then speak into the microphone clearly and slowly . The T ransmit/Monitor LED lights red . - Release the PTT Button (4, *3) to receive. - Communication can only be accomplished when the channel and CTCSS tone frequency of at least two parties are the same.
17 are 38 CTCSS Sub-channels for each main channel. A different subcode m ay be se l ec t ed for each of the 14 channels. T o change the CTCSS Sub-channel: - From FRS standby mode, press the MODE Button twice; a flashing oF or sub-channel number is displayed, together with the flashing CTC icon.
18 Dual Watch Mode This feature allows you to monitor two channels at the same time. While in dual watch mode, the unit will continuously monitor both the primary and dual watch channel. Received signals will be played for 5 seconds, then the unit will resume scanning the two channels.
19 Key T one This feature allows the transceiver to sound a confirmation tone whenever the following keys are pressed: Monitor (M) Button, Up/Down Buttons, MODE Button or the SCAN Button. T o turn the key tones on or off: - From FRS standby mode, press the MODE Button six times until bP , the Bell ( ) icon, and On or oF flash on the LCD display .
20 - Press the Up or Down Button to preview and hear the 3 available call melodies. - Press the PTT button momentarily to confirm selection. Refer to the PTT button (4) to transmit ring signal. Channel Scan Operation This feature allows you to monitor all channels automatically for valid signals.
21 seconds to Lock the Auto Key function; the ( ) icon appears on the display . - The Power , PTT , Up/Down and Monitor Buttons are not ef fected . - T o unlock the Auto Key function, press and hold the SCAN button for at least 2 seconds; the icon ( ) disappears from the display .
22 - Momentarily press the PTT button to confirm weather channel selec- tion. T o exit the Weather mode, press and hold the MODE button for at least 2 seconds. Weather Alert Mode When the unit is in the weather standby mode (FRS), if a weather alert signal is received, the unit will generate a warning tone.
2 . The FRS-3000PK has been designed to maximize performance and improve transmission range in the field. T o avoid interference, it is recommended that you do not use the units closer than 5 feet apart. 3. For best transmission results, always keep your mouth about 2-3 inches from the microphone (12, *14) and speak slowly in a normal voice.
T roubleshooting 24 Weak or no Weak batteries (mobile unit) Charge or replace batteries signal received Channel and privacy Adjust the transceiver’s code not set the same settings to match those as .
General Frequency Range: Refer to Frequency Charts Channel Spacing 12.5 kHz Privacy Codes 38 for each main channel Dimensions (W x D x H): Mobile Unit 2.
26 This transceiver complies with FCC regulations for use in the United States of America. Use in other countries may be prohibited or restricted by local regulation. Please check with the local regulating agency be- fore using this device outside the United States of America.
Continuous T one Coded Squelch System T one Frequencies (in Hz) CTCSS Freq. Hz CTCSS Freq. Hz 1 67.0 2 0 131.8 2 71.9 2 1 136.5 3 74.4 2 2 141.3 4 77.0 2 3 146.2 5 79.7 2 4 151.4 6 82.5 2 5 156.7 7 85.4 2 6 162.2 8 88.5 2 7 167.9 9 91.5 2 8 173.8 1 0 94.
28 90 DAY LIMITED WARRANTY AUDIOVOX CORPORATION, 150 MARCUS BLVD., HAUPPAUGE, NEW YORK 11788 1-800-290-6650 128-5385A Applies to Audiovox Family Radio and General Mobile Service Products.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Audiovox FRS-3000PK c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Audiovox FRS-3000PK - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Audiovox FRS-3000PK, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Audiovox FRS-3000PK va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Audiovox FRS-3000PK, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Audiovox FRS-3000PK.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Audiovox FRS-3000PK. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Audiovox FRS-3000PK ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
