Manuel d'utilisation / d'entretien du produit PLDVD199XM du fabricant PYLE Audio
Aller à la page of 32
OWNER’S MANUAL Mobile Audio/V ideo System • Digital Audio Out-Coaxial • PLL Synthesizer Stereo Radio • DVD Player • Automatic Memory Storing • Full Detachable Panel • Preset Equalization.
2 Compatible with P AL DVD (Video CD) and NTSC DVD (Video CD) This player can play discs recor ded in either P AL or NTSC format. • A single LSI chip now integrates all major DVD playback circuit functions including MPEG2 decoder , video D/A converter , and audio decoders.
3 CONTENTS Safety Information ........................................................................................ 4 Disc Notes ..................................................................................................... 5 Installation ..
4 CAUTION: MOBILE DVD PLA YER IS A CLASS I LASER PRODUCT . HOWEVER THIS MOBILE DVD PLA YER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIA TION EXPOSURE IF DIRECTED. BE SURE TO OPERA TE THE MOBILE DVD PLA YER CORRECTL Y AS INSTRUCTED.
DISC NOTES 5 Disc formats supported by this player DVD 12 cm disc Video CD 12 cm disc CD 12 cm disc MP3 12 cm disc Discs which cannot be played with this player • DVD-ROM • DVD-R/DVD-RAM • CDV • CD-G Handling and Cleaning • Dirt, dust, scratches and warping disc will cause misoperation.
6 INST ALLA TION Notes: • Choose the mounting location where the unit will not interfere with the normal driving function of the driver . • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly .
7 6. Mount the sleeve by inserting the sleeve into the opening of the dashboard and bend open the tabs located around the sleeve with a screwdriver . Not all tabs will be able to make contact, so examine which ones will be most effective. Bending open the appr opriate tabs behind the dashboard to secur e the sleeve in place.
INST ALLA TION DIN REAR-MOUNT (Method B) If your vehicle is a Nissan, Toyota, follow these mounting instructions. Use the screw holes marked T (T oyota), N (Nissan) located on both sides of the unit to fasten the unit to the factory radio mounting brackets supplied with your vehicle.
9 USING THE DET ACHABLE FRONT P ANEL REMOVING THE FRONT P ANEL 1. Pr ess the release button on the front panel and pull of f the front panel. 2. Keep fr ont panel into the case. INST ALLING THE FRONT P ANEL T o install the front panel, insert the panel into the housing and make sure the panel is properly installed.
NOTE: MUTE WHILE TELEPHONING If your unit is connected to a mobile telephone through the telephone mute line, the car radio’ s volume will be muted as soon as you “pick up” the telephone.
1. PWR (power button) 2. DISP 3. EQ 4. 5. Disc Slot 6. MOD(SW) 7. 8. Liquid Crystal Display 9. ENT/MUT 10. SEL 11. VOLUME 12. VOLUME 13. BND/MEN 14. 1~6 preset buttons 15. SMART -M 16. MANU/SKIP 17. MANU/SKIP 18. AMS 19. ST/ XM-MOD 20. 21. SCN 22. RPT 23.
12 REMOTE CONTROL LOCA TION AND FUNCTION OF KEYS 9 4 8 6 10 7 3 5 27 12 11 23 16 17 14 13 32 24 1 2 25 28 31 30 26 29 20 15 18 22 21 19.
13 LOCA TION AND FUNCTION OF KEYS 1. POWER Press POWER to turn the unit ON or OFF . 2. SMART In DVD mode, press it shortly to enter SMAR T MODE function. 3. A-B A-B repeat allows a passage to be r epeated continuously . 4. ANGLE Changing of the view angle on multi-angle DVD disc.
Loading a Disc When all connections have completed, you can load a disc as follow: 1. T urn the ignition on to the accessory position. 2. Pr ess the PWR button (1) on the front panel or POWER button on the remote control to turn on the unit. 3. Insert the disc with printed side facing up into the disc slot (2).
15 OPERA TION VOL BASS TRE MID BAL F AD (Volume) (Bass) (T reble) (Middle) (Balance) (Fader) BASIC OPERA TION SWITCHING ON/OFF THE UNIT Press any button on the fr ont panel (except button and button) or POWER button on the remote contr ol to turn on the unit.
RADIO OPERA TION SWITCHING TO RADIO MODE Press MOD on the fr ont panel or MODE on the remote contr ol to select radio mode, the radio mode appears in the display together with the memory band and frequency .
2. Use CH/TUN/TRK button or CH/TUN/TRK button to select hundred digit. 3. Press ST/XM-MOD button again to confirm entry of the hundred digit and the 10s digit is flashing on/off. 4. Use CH/TUN/TRK button or CH/TUN/TRK button to select 10s digit. 5. Press ST/XM-MOD button again to confirm entry of the 10s digit and the 10s digit is flashing on/off.
during play . Each timEach time the button is pressed, the speed of slow changes according to the according to the disc as follow . FOR DVD: FOR VCD: P AUSE PLA YING Pressing on the remote contr ol or on the front panel during playback will stop play temporary .
ON-SCREEN DISPLAY FUNCTION Pressing the DISPLA Y button during playback to display the contents of the current disc on the scr een. Example, how to display the contents of the curreny disc.
(4) Press DISPLA Y for the fourth time: (5) Press DISPLA Y for the fifth time: The message on the screen will be clear ed. FOR MP3: (1) Press DISPLA Y for the first time: (2) Press DISPLA Y for the second time:. (3) Press DISPLA Y for the thir d time: The message on the screen will be clear ed.
21 MENU FUNCTION Press BND/MEN button on the DVD unit or BND (MENU) b utton on the remote contr ol while the disc is playing and the disc menu will be displayed. Y ou can navigate with the remote contr ol navigation keys and select a feature wih the ENT/MUT button on the DVD unit or OK button on the remote contr ol.
22 OPERA TION For example: In stop mode, use / , / on the remote contr ol to select the item or folder (such as CD01, CD02...), and press ENT/MUT button on DVD unit or OK button on the remote contr ol to confirm, then select the desired track (such as 001 PLUMT , 002 RZID.
INITIAL SETUP SETUP MENU --- MAIN P AGE 1. Press SETUP on the r emote control or on the DVD unit in the stop mode.(Press the stop button twice to ensure that the player is in STOP mode.) 2. The initial SETUP menu is displayed. 3. Select the preferr ed item by using the / buttons.
24 --- GENERAL P AGE --- PIC mode setup Select AUTO, the player PIC mode will depend on DVD disc. Select HI-RES format for best image resolution. Select N-FLICKER format on image or picture with noise or distortion.
25 SETUP --- GENERAL P AGE --- SCR SA VER setup Select the SCR SA VER ON/OFF . SPEAKER SETUP --- SPEAKER SETUP P AGE --- This is to activate the audio output from DOLBY AC3 5.1 DOWNMIX to 2 channel mode. Select the preferred SPEAKER connection by using the cursor buttons.
PREFERENCES SETUP --- PREFERENCES P AGE --- TV type setup This player can play discs recor ded in either P AL or NTSC format. Select NTSC format, when you connected to NTSC TV . Select P AL format, when you connected to P AL TV . Select AUTO format, the player TV output format will be according to the DVD disc format.
--- PREFERENCES P AGE --- SUBTITLE language setup Select the preferr ed SUBTITLE language by using the cursor buttons. --- PREFERENCES P AGE --- DISC MENU language setup Select the preferr ed DISC MENU language by using the cursor buttons.
--- PREFERENCES P AGE --- DEF AUL TS Select reset to r evert to factory initial settings. --- PREFERENCES P AGE --- SMART NA V If selected WITH MENU mode, when playing an MP3 disc, the smart navigation menu will appear on the screen, then the user can select a track to play according to the menu hint.
DEF AUL TS T ABLE General Setup TV Display Normal/LB PIC Mode AUTO Angle Mark ON OSD Language English Captions ON SCR Saver ON Speaker Setup Downmix Stereo Audio Setup SPDIF OFF OP Mode Line Out Dynam.
If it appears that your DVD unit is faulty , first consult this checklist. It may be that something simple has been overlooked. Under no circumstances should you try to repair the player yourself, as this will invalidate the warranty . Only qualified service personnel can remove the cover or service this player .
31 SPECIFICATIONS GENERAL P o wer Supply Requirements : DC 12 V olts, Negative Ground Chassis Dimensions : 178 (W) x 160 (D) x 50 (H) Tone Controls - Bass (at 100 Hz) : ± 10 dB - T reble (at 10 KHz) : ± 10 dB Maximum Output P ower : 4 x 40 watts Current Drain : 15 Amper e (max.
32 SPECIFICA TIONS Supply voltage: Compositive video 1.0Vp-p 75 Ω Discs played: (1) 5” (12 cm) DVD-VIDEO disc (2) Compact disc (CD-DA/CD-R/CD-RW/MP3) (3) 5” (12 cm) VIDEO CD Note: Specifications and design are subject to modification, without notice, due to improvements in technology .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté PYLE Audio PLDVD199XM c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du PYLE Audio PLDVD199XM - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation PYLE Audio PLDVD199XM, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le PYLE Audio PLDVD199XM va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le PYLE Audio PLDVD199XM, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du PYLE Audio PLDVD199XM.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le PYLE Audio PLDVD199XM. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei PYLE Audio PLDVD199XM ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
