Manuel d'utilisation / d'entretien du produit TREADMILL PATL30706.0 du fabricant ProForm
Aller à la page of 30
USER'S MANUAL M odel No. PATL30706.0 Serial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. Serial Number Decal QUESTIONS? If you have questions, or if any parts are missing or damaged, PLEASE CONTACT OUR CUS - TOMER SERVICE DEPARTMENT DIRECTLY.
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least 2.5 m (8 ft.) of clearance behind it and 0.
21. When using iFIT.com CDs and videos, you can manually override the speed and incline settings at any time by pressing the speed a nd incline buttons. However, when the next “chirp” is heard, the speed and/or incline will chang e to the next settings of the CD or video program.
5 T hank you for selecting the new PROFORM ® 4 50 CX t readmill. The 450 CX treadmill combines advanced technology with innovative design to help you get the most from your exercise in the convenience of your home. And when you’re not exercising, the 450 CX treadmill can be folded up, requiring less than half the floor space of other treadmills.
ASSEMBL Y Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed. N ote: The und ersi de o f th e wal king bel t is coa ted with high-performance lubricant.
1. Make sure that the power cord is unplugged. I dentify the Right Upright (36), which has a square hole in the location shown. Slide the R ight Base Leg Cover (102) onto the Right Upright.
8 4. See the left inset drawing. Identify the two Frame Spacers (34). Open the included packet of g rease, and apply grease to both sides of both Frame Spacers.
9 7. Identify the Right Handrail Endcap (91), which does not have a cutout in the bottom, and slide it onto the lower end of the Right Handrail (11). Make sure that the screw hole in the Right Handrail Endcap is at the bottom.
10 9. Pivot the cylinder end of the Gas Spring (112) down to the position shown. Remove the Spring Clip (105) from the end of the Gas Spring. Next, align the cylinder end of the Gas Spring (112) with the bracket in the center of the Base (48). Press the end of the Gas Spring onto the ball on the bracket.
1 1 12. Lower the Uprights (31, 36) as shown. See the inset drawing. Push the Uprights (31, 36) sideways so that the treadmill Frame (74) is centered between the Uprights. Firmly tighten the Upright Bolts (40) and the Frame Bolts (32) on each side of the treadmill.
12 14. Slide the Left Base Leg Cover (101) onto the Base (48) as shown. Attach the Left Base Leg Cover with three 3/4" Screws (2). Be careful not to overtighten the Screws. 2 48 2 2 14 15. Tighten a 3/4" Screw (2) into each side of the Base (48) and each Base Leg Cover (101, 102).
13 17. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included hex keys in a secure place; the large hex key is used to adjust the walking belt (see page 26). To protect the floor or carpet, place a mat under the treadmill.
14 OPERA TION AND ADJUSTMENT T HE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply sili- cone spray or other substances to the walking belt or the walking platform. Such substances will deterio- rate the walking belt and cause excessive wear.
15 FEATURES OF THE CONSOLE The treadmill console offers a selection of features designed to make your workouts more effective. When the manual mode of the console is selected, the speed and incline of the treadmill can be changed with the touch of a button.
16 HOW TO TURN ON THE POWER P lug in the power cord (see page 1 4). Next, locate the o n/off switch on the tread- mill frame near the power cord. Make sure that the on/off switch is in the “on” position. Next, stand on the foot rails of the treadmill.
Follow your progress with the display. When the manual mode is selected, a track representing 400 m eters will appear in the upper right corner of the display. As you walk or run on the treadmill, the i ndicat ors ar ound the track will appear in succession until the entire track appears.
18 H OW TO USE A PRESET PROGRAM I nsert the key into the console. S ee HOW TO TURN ON THE POWER on page 16. S elect a preset program. To select one of the ten preset programs, press the Program Select but- ton repeatedly until one of the programs num- bered “P–1” through “P–10” appears in the display.
19 T o use iFIT.com MP3 or CD programs , the treadmill m ust be connected to your MP3 player, CD player, portable stereo, home stereo, or computer. See pages 19 and 20 for connecting instructions. To use iFIT.com programs directly from our Web site , the treadmill must be connected to your computer.
20 HOW TO CONNECT YOUR HOME STEREO N ote: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is b eing used, see instruction B. A. Plug one end of a long 3.5mm to RCA stereo audio cable (available at electronics stores) into the input jack on the console.
21 HOW TO CONNECT YOUR VCR N ote: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is b eing used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 20.
22 If the speed or incline settings are too high or too low, you can manually override the settings at any t ime by pressing the Speed or Incline buttons on the console. However, when the next “chirp” is h eard, the speed and incline will change to the next settings of the program.
23 Follow the on-line instructions to start the p rogram. W hen you start the program, an on-screen count- down will begin. Return to the treadmill and stand on the foot rails. Find the clip attached to the key and slide the clip onto the waistband of your clothes.
24 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be per- m anently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 20 kg (45 lbs.
25 TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
26 Locate the Reed Switch (62) and the Magnet (67) on the left side of the Pulley (64). Turn the Pulley until t he Magnet is aligned with the Reed Switch.
27 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician.
P ART LIST—Model No. P A TL30706.0 R1106A Key No. Qty. Description Key No. Qty. Description 1 1 Hood 2 28 3/4" Screw 3 1 Left Foot Rail 4 8 Foot Rail Screw 5 2 Motor Tension Bolt 6 2 Motor Tens.
28 27 36 76 1 53 52 47 59 58 57 20 19 18 90 2 17 21 22 25 17 28 2 21 22 20 19 1 1 31 34 33 32 32 33 2 49 2 23 29 50 38 38 56 47 54 96 55 60 54 54 27 62 61 54 66 24 64 65 66 72 73 4 4 3 71 68 70 69 4 4.
Part No. 243072 R1106A Printed in China © 2006 ICON IP, Inc. ORDERING REPLACEMENT P ARTS To order replacement parts, call our Customer Service Department toll-free at 800-830-7240, or call: When ordering parts, please be prepared to provide the following information: • the MODEL NUMBER of the product (PATL30706.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté ProForm TREADMILL PATL30706.0 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du ProForm TREADMILL PATL30706.0 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation ProForm TREADMILL PATL30706.0, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le ProForm TREADMILL PATL30706.0 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le ProForm TREADMILL PATL30706.0, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du ProForm TREADMILL PATL30706.0.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le ProForm TREADMILL PATL30706.0. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei ProForm TREADMILL PATL30706.0 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
