Manuel d'utilisation / d'entretien du produit VE5850 du fabricant POSline
Aller à la page of 75
VE5850 / VE5855 PT Network Dome Camera User’s Manual V er s ion 1.0 1.
Contents Contents ......................................................................................................................... 2 Package Contents ............................................................................................
Attachment B: Bandwidth Estimation ......................................................................... 71 Attachment C: T roubleshooting and F AQs .
Package Contents The PT Network Dome Camera is provide d with the followin g accessories. Please contact your dealer if any one of the following is missing. 1. PT Network Dome Camera 2. 12V DC power cable 3. Device Cover 4. Screws 5. A V Y cable 6. Quick guide 7.
System Requirements PT Network Dome Camera Internet Environment LAN 10/100M Ethernet Wireless LAN 802.11b or 802.11g Monitor System Requirements OS support Windows 2000 Profe ssional SP4, XP Home SP2 Browser support Internet Explorer 6.x or later Hardware CPU: Pentium 4 2.
Introduction The PT Network Dome Camera is a multi-f unctional stand-alone PT Internet Cam era that can connect to Ethernet, LAN, or any broad-band networks . Unlike trad itional CCTV cameras, the product has a built-in CP U and webpage server to provide users with a mechanism for hom e security or remote office m onitoring applications.
System Introduction 1. DC power cable: The DC input connector ha s a socket to conn ect the product to a power source. 2. Ethernet connector: An RJ-45 connector is provided for connection to the 10Base-T Ethernet cable or 100 Base-T High Speed Ethe rnet cable.
Note 1: If you want to hang this product fr om the ceiling, do not fasten it to the asbestos board on a light metal frame. The fragile asbestos bo ard cannot secure this pr oduct properly and may cause it to dr op, possibly causing injuries to personnel or damage to the pr oduct.
External alert bus (DI/DO) For more information about DI/DO, refer to Attachm ent A. Reset to factory settings After turning on the power, insert a slim pl astic object into the reset orifice and pre ss for five seconds to restore the unit to factory settings.
Hardware Installation Y ou can use bundled screws and the device c over to secure this camera to the ceiling (strongly recommend this type of installation for the best ef fect) or place horizontally (this camera has image inversion functi on, please refer to the “Control Panel” section).
supply to the AC power socket. After completing the installation and power connection, the lens on this camera will rotate automatically . The Link and Alert LEDs will show green lights for at least 5 seconds. Note: The user can re fer to the bundled Quick In stallation Guide for quick installation.
Camera Settings After the hardware has been installed, inse rt the supplied CD in the computer and execute the file IP FINDER.EX following th e steps below to search for and change the IP address of the camera. 1. Start the machine. Execute the IP Finder.
3. Click Subm it to validate new settings. 5. Confirmation When all changes have been c onfirmed, click “Exit” to quit. 4. When all changes have been confirmed, click Exit to q uit. Notes: 1. The IP FINDER can only find the IP addresses of cameras that share the same hub on the LAN.
Camera Setting from a Router You can use DHCP when you want to use the camera on the Intranet (LAN). However, the IP must fixed when you want to use the cam era on a WAN. For th is application, it is required to set up a virtual server on the ADSL router.
Change the Internet Explorer Setting This product uses ActiveX Control to play images and sound on your PC. The ActiveX Control application software wi ll be downloaded to your PC when you connect it to the Internet. To ensure successf ul download of the software, the Internet Explorer "security settings" must be change d accordingly.
Enter the Main Page 1. Open the IE browser and key in the IP address of the product. Key in the IP addr ess of the camera When the login scree n appears, key i n "root" in the User Name and Password fields. Clic k OK. Camera logi n screen 2.
Click “Install ActiveX Control”. Setup prompt screen 4. The security warning screen appears. Click "Install". Click “Install”. 5. When ActiveX Control is installed su ccessfully, you will see the camera image and interface.
Camera Main Page Descriptions: Source: Information bar 1. Format: resolution of the current video stream 2. FPS: Frame Per Second of th e current video stream 3. BitRate: bandwidth per second of the current video stream Product name Image area Attention: Please change th e streaming setting to HTTP if nothing appears in the image area.
Control panel 1. Camera direction: controls the direction of the camera (up, down, left, right, home position). Direction c ontrol. 2. Camera speed: controls the rotation speed of the camera from “1” (lowest) to “7” (highest). Rotation speed. Speed 1 2 3 4 5 6 7 Angle/Sec.
3. Preset: presets the rotation points for the camera (16 points) 4. Click Update to exit. 1. Click Set to enter the Preset Setting screen. 2. Enter t he name of the lo cation. 3. Control the cam era direction. 5. Select the num ber you need and cl ick Go.
4. T our: Enable or Disable the fixed point auto tour mode of the camera. The camera’ s pre-set fixed points must be set for this function to work. This function allows the setting of 5 tour groups. 1. Click Set to enter the T our Setting screen. 3.
5. AutoPan: enables/disables AutoPan. You can enable the AutoPan function to make the cam era automatically move back and forth horizontally. Disable th e AutoPan function to stop the scan. 6. Alert: displays alert trigger This indicator flashes to warn you when a movement or alert is detected.
8.Language: selects a UI language Four languages are available: English, Si mplified Chinese, Traditional Chinese and Japanese. Selects language 9.Camera Position: sets the position for display of the.
10. Zoom In/Out: Camera scr een display size V iewing option is from 0.5 to 4 times the screen size. Note: When you use zoom in, the screen seem s r ough because the res olution after digital zoom exceeds the original re solution. Select an image size 11.
Select a video stream protoco l 25.
12.Brightness: adjusts video brightness / Contrast: adjusts video contrast Press + (increase) or ﹣ (decrease) from the setting window to adjust the brightness or contrast of the image.
15.Path: sets the save path and name for recorded images and snapshots. The filename is the recording date by def ault. You can identify the file by prefix of the filename. Click the Path field to select the folder to save the file. Save the path Pickup function Automatic Noise Suppression system 16.
System Settings System setting contains basic and applicati on settings. The basic setting is execute d for basic system information, transmission sp eed, audio/video code, user authorization, date/ti.
Basic Setting >Video/Image Basic Setting > Video Image > Video Image Basic Setting > Video / Im age > Video Image > 3GPP To view the camera image using a 3G ce llular phone, click Enable to enable the 3GPP mode. (Note: When the 3GPP mode has been activate d, all relevant parameters are set automatically and cannot be changed.
4. Enter the link name. 3. Add a new link. 5. Enter the IP address of the camera, e.g. rtsp://xxx.xxx.xxx.xxx:554/cam1/3gpp 6. Select OK to save the setting. 7. Select this stream name to proceed with linking. 8. Select “Y es” to connect. 10. Loading the image.
1 1. V ideo stream screen . 31.
Basic Setting > Video / Image > Video Image >Video Format You can select MPEG4 or MJPEG as th e video format. It is recommended to select MPEG4 for real-time browsing to optimize the bandwidth. MJPEG is a good choice for the best resolution when video recording is required for collection of evidence.
Basic Setting > Video / Image > Vi deo Image >Frame per Second (FPS): With NTSC, you can choose 1, 2, 3, 4, 5, 6, 7, 10, 15 or 30 for video resolution With PAL, you can choose 1, 2, 3, 4, 5, 6, 12 or 25 for video resolution.
Select GOP to update the speed. GOP provides users with the function to set the pages of the I Frame and P Frame to be transmitte d in the MPEG4 mode. Basically, the I Frame page contains the entire picture and needs higher bandwidth, while the P Fram e page only contains the parts th at are different from th e I Frame and need lower bandwidth.
OSD setting Brightness/con tract adjustm ent Date, time, and text display 35.
Basic Setting > Audio (Sound) Basic Setting > Audio > Audio (sound setting) Basic Setting > Audio > Audio > Audio Raw Format You can select No Audio or PCM. When you select No Audio, the sound transmission from the built-in m icrophone pauses.
Basic Setting > User(User) The administration of the camera can set up access privileges by administrator, operator, and viewer to ensure the securi ty and control of the camera.
User setting Change the pri vilege or pass word of a user . Y ou cannot chan g e the nam e of the user . Add a n ew user and set up a different privilege. Delete a user from the list. Log in the use rname, passw ord and privilege as required. Y ou can als o define the PTZ control here.
Basic Setting > Networ k (Network Settings) Basic Setting > Network > Net wor k (cable network setting page) Basic Setting > Network > Network > IP Assignment Cable network setting page DHCP setting: DHCP(Dynamic Host Configuration Protocol) is a protocol tha t enables automatic assignment of TCP/IP information to the client.
Basic Setting > Network > W ir eless (wir eless network setting page) The cable network setting procedure shall a pply where the LAN socket is connected to the network cable. Where wireless network is required, you need to remove the network cable after completing the wireless network setting and restart the m achine.
Mode: Selection of the wireless networking mode 1. Infrastructure: Infrastructure n etworking mode Thiscamera uses the wireless Access Point (A P) as the hub when set to infrastructure networking mode and connects to th e network via the wireless AP. 2.
Network authen tication type Authentication Type: Network authentication type 1. Open System: No encryption. 2. Shared Key: Security of data is highl y protected by encryption during transmission. Note: Refer to the user setting ins tructions of your wireless IP sharer for m ore information.
Encryption options IP setting in the wireless networkin g mode WEP Encryption: WEP encryption function When the base station (AP)which you wa nt to access has enabled the encryption function, you need to acquire the following information by accessing its encryptio n settings.
Encryption mode Encryption authentication type Encryption group WEP security mode : Select an enc ryption mode from the list. The format is “None” by default, indicating that the security function is disabled.
3. SSID: Enter the server na me of the base station. 4. WEP Encryption: Select the encrypted key that is the same as the base station. 5. KEY: Select a group that is the same as the wireless base station. You m ust select KEY1 for base stations that only have a set of keys.
Stream ing port setting Basic Setting > Network > PPPoE (dial-up network ing setting) PPPoE: Point-to-Point Protocol over Ethernet is a protoc ol that supports access to a high-speed wideband network using a PC and a wideband modem (such as xDSL, Cable, Wireless modem).
3. Key in the IP address of the camera and enter "PPPoE Setting" following the route Setting Î Basic Setting Î Network Î PPPoE. 4. Key in the xDSL "Username" and "Pa ssword" acquired from your ISP. Click Save to confirm the setting.
Basic Setting > Network > DDNS (Dyn amic Domain Name Server Setting) The IP address (Ex. 210.168.0.22) is like a telephone number, while the website address is like a name in an address book. The DDNS allows the user to access the website by entering the name of the webs ite without memorizing a bunch of cold numbers.
Basic Setting > Network > UPnP (Universal Plug and Play) If you connect your camera to a router , IP allocator , or wi reless AP , your camera will possibly be blocked by the NA T and can’t be located on the Internet. T o penetrate the firewall, activate the suppor tive item- UPnP .
T o activate the UPnP function in W indows OS: Ex: W indows XP: 1. W indows component installation. 4. Click Net working Services 2. Click Add/Remove Pr ogram s 1. Click Control Pane l 5. Click Detail 6. Check UP uP User Interface 3. Click Add/Remove W indows Compone nts 2.
3. V iew the connection device using “My Network Place” 1. Open “My Network Place” 2. The LAN camera appears. Double-click t o access the main page.
Basic Setting > Network > Samba This camera is able to u pload the snapshots to a specified shared folder when an event is triggered. T o use this function, a Samba setting is required.
Basic Setting > Network > Notifica tion Of IP Address Change (IP address change notice) This setting is not necessary for a fixed IP . For a dynamic IP , you need to update the IP address every time you connect to the Internet to access the camera.
Notification setting 54.
Basic Setting > Date/Tim e (date/time setting) Date/T ime setting Basic Setting > Date/Time > Server T ime (the date/time of the server) Basic Setting > Date/Time > PC Time (the date/time of your PC) Basic Setting > Date/Time > Time Setting (date/time setting) There are three ways to synchronize the time.
Basic Setting > IP Filter This function filters IP addresse s and is able to allow or deny visits f rom particular addresses/target addresses. IP filter setting Basic Setting > IP Filter > Ge.
Application Setting Application Setting > Event (e vent trigger setting page) This camera is equipped with intelligent security management f unctions. It ensures security monitoring by allowing user to de fine “trigger events” based on particular times and situations, and sets the camera respond to the event.
Add Event : Add Event setting page Options: • General: Name: Name the trigger event h ere. • Response to event trigger: the time setting of the trigger event Always: Always monitoring During time: Check the date you want to m onitor (Sun~Sat) and the duration of monitoring here.
Add Schedule : Add Schedule setting page The Add Event setting page and the Add Sche dule setting page are basically the same except that the Add Schedule setting page does not have the option “T rigger by” to indicate the sources of the trigger ev ent.
The default status of the di gital input pin is set as “N ormal Open”, but users can change it to “Normal grounded” by setting the page “Setting->Application->Event->T rigger”: 1. When alarm input is set to be “Normal Op en”, then the external device connected to alarm input pin should be in open st atus.
Click Add Ftp to go to the setting page a nd enter the information of the FTP server you specified. Add FTP setting page Name: the nam e of the FTP Network Address: IP address of the FTP Login: Log-in.
ProxyPort: Proxy server port ProxyLogin: Proxy server log-in name Proxy Password: Proxy se rver log-in password Click Add T cp to go to the setting page and enter the info rmation of the TCP server you specified.
Application Setting > Motion Detection You can open the setting frame by clicking on the area to monitor. To m ove area to monitor, drag the area with your mouse; to ad just the size of the fram e, drag the arrow to adjust after you move the mouse to the e dge of the area and le ft-click; There are 3 frames available for setting.
Application Setting > Firmware upgrade Firmware upgrade page Contact your dealer for more information about firm ware upgrade. The sales representative will transmit the latest vers ion to you via e-mail. When you receive the firmware, decompress the file ( uImage.
4. Click Browse… to select the location wh ere the firmware file is stored. 5. Click submit . 6. The auto upgrade runs. The Upgrade S tatus shows the progress of the upgrade. When the firmware upgrade has been completed, the machine reboots autom atically .
Application Setting > Factory Default Y ou can use this function to reset to factory defa ult, but all changes, including the IP address, you have made are deleted.
Backup: Data backup Back all parameters: Back up all changes you have made. Wh en you click Backup , a file download window appears. Back up the file named param.
Application Setting > Reboot You can enable this function for the camera to reboot automatically. 68.
Attachment A: External Alarm In addition to the motion detection executed by the internal soft ware application, the product can connect to external infrared det ectors, beepers, and smoke detectors. For more information about these external devices, contact to your local retailer , dealer or installation service provider .
External Alarm I/O Circuit Diagram Pin 1 Wa r n i n g ! The alarm will be trigger ed when alarm pin 1 & 2 are formed as a short circuit. Please do not connect the electric voltage or current into .
Attachment B: Bandwidth Estimation Since the FPS is dependent on the bandwidth of the cam era, the relationship between the size of an image file and the bandwidth is always the m ajor concern of the system construction engineer. The table below shows the relation between the resolution an d size of an MJPEG file in the NTSC system.
Attachment C: Troubleshooting and FAQs Question Answer and Solution Function What encoder and decoder are used by the camera fo r sounds and images? The camera uses MJPEG or MPEG4 compression technology to provide quality images.
• The anti-virus applications on the PC or the firewall might block the IP Finder from execution. If you can not execute the IP Finder, please disable your anti-virus applications or firewall. Internet Explorer does not display the camera screen correctly.
computer. sure that your Internet Explorer security is properly set (the default value is moderate). Re-connect to the camera main page and download the file again. Incomplete download or installation of the camera ActiveX control is the ma jor reason for this problem.
I can't control the camera to move up, down, right, or left smoothly. Delay might occur when you are accessing a video stream and remotely moving the camera horizontally. Where significant delay is identified when you move the cam era horizontally or vertically deactivate the audio streams and/or reduce the size of the video stream.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté POSline VE5850 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du POSline VE5850 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation POSline VE5850, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le POSline VE5850 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le POSline VE5850, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du POSline VE5850.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le POSline VE5850. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei POSline VE5850 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
