Manuel d'utilisation / d'entretien du produit ITT4300B du fabricant POSline
Aller à la page of 46
ITT4300 Label Printer.
CONTENTS Checking Your Box ............................................................................... 3 Power Supply ........................................................................................ 5 Parts and Features ...................
POSline ITT4300 Label Printer 3 Checking Your Box Receiving the box of your printer, you are advised to check first for the possible shipping damage. There are two ways you can do it: 1. Inspect the outer appearances of both the box and the printer for possible damage.
POSline ITT4300 Label Printer 4.
POSline ITT4300 Label Printer 5 Power Supply Setting up the Printer Before setting up the printer you should first consider the following: • Find a solid flat surface with adequate room for the printer. Make sure there is enough room on the top side for the media and ribbon access.
POSline ITT4300 Label Printer 6.
POSline ITT4300 Label Printer 6 Parts and Features Front Access Door.
POSline ITT4300 Label Printer 6.
POSline ITT4300 Label Printer 6 Loading the Ribbon Notes: 1. This section is applicable to the transfer thermal printing. 2. Attached ribbon is coating inside. 1. Lift the top access door and the front access door to expose the compartment. ( Figure 1 ) 2.
POSline ITT4300 Label Printer 6.
POSline ITT4300 Label Printer 6.
POSline ITT4300 Label Printer 6 Loading the Media The ITT4300 printers can be operated in three different options: standard, peel-off, or with a cutter. • Standard mode allows you to collect each label freely. • In peel-off mode, the backing material is being peeled away from the label as it is printed.
POSline ITT4300 Label Printer 6.
POSline ITT4300 Label Printer 6.
POSline ITT4300 Label Printer 6 10.
POSline ITT4300 Label Printer 6 Operator Controls Front Panel The front panel includes - 3 LED indicators (READY, MEDIA and RIBBON) - 3 buttons (FEED, PAUSE and CANCEL).
POSline ITT4300 Label Printer 6 LED Indicators There are three LED indicators on the front panel, “READY”, “MEDIA” and “RIBBON”. These indicators display the operation status of the printer. • READY The READY indicator will remain lighted except if any of the following conditions prevail.
POSline ITT4300 Label Printer 6 Buttons There are three buttons, each having two basic functions. Button Under normal condition Pressed the button and turn on the power simultaneously FEED Feeds a label. Performs a self test and a configuration report will be printed.
POSline ITT4300 Label Printer 6 There is a power slide switch for voltage selection. Set correct voltage (115V or 230V) otherwise the printer will be damaged.
POSline ITT4300 Label Printer 6 Performing Calibration After the media and label are loaded, it is necessary to do the calibration for the label sensor. 1. Press and hold the PAUSE button. 2. Turn on the power. 3. The printer will feed the labels for 12 inches.
POSline ITT4300 Label Printer 6 Printing Configuration Report Performing the Self Test 1. Turn off the printer. Press and hold the FEED button. 2. Turn on the power. 3. When the message “SELF TESTING …” is displayed on the LCD and READY indicator blinks, release the button.
POSline ITT4300 Label Printer 6 Resetting the Printer to Factory Default Settings If you would like to reset the printer to its factory defaults after certain commands have been sent or settings changed: 1. Turn off the printer. Press and hold the CANCEL button.
POSline ITT4300 Label Printer 6 Hooking up the Printer & Computer Connecting the Printer to Your Host 1. You can connect the printer with any standard Centronics cable to the parallel port of the host computer. 2. Alternatively you can connect the printer with a serial cable to the RS232C port of your computer or terminal.
POSline ITT4300 Label Printer 6 Communicate with the Printer The bundled printer driver can be applied to all the applications under Windows 2000/ 98/95, Me, Windows NT and XP. Through this driver you may run any popular software applications e.g. MS- Word and print out the contents by this label printer as long as they are for Windows.
POSline ITT4300 Label Printer 6 Installing Driver Note: Before installation, please make sure your “user’s right” is up to the level of ‘Administrator'. 1. Click the “Start” button. 2. Select “Setting”, then select “Printers” and double click the “Add Printer” icon.
POSline ITT4300 Label Printer 6 Set the Parameters After installing the driver, you can follow the path below to set parameters: Start à Settings à Printers à Label Dr. à Properties The parameters include: Ports Select the IO port to link with the printer.
POSline ITT4300 Label Printer 6 For Win 98 • Ports Properties menu à click “Details” à select the IO port à click “OK” • Paper size • Orientation • Paper source (Media type) • Media choice (Darkness) Copies Properties menu à click "Paper" à click each item to à select desired parameter à click "OK".
POSline ITT4300 Label Printer 6 Properties menu à click "Paper" à click "more option" à select Enable/ without cutter, peeler à click "OK" • Print quality (Speed) P.
POSline ITT4300 Label Printer 6 • Create User-Define Paper Properties menu à click "Paper" à select "Custom" à User-Define size à set up a new size à click "OK".
POSline ITT4300 Label Printer 6 For Win 2000 • Ports Properties menu à click "Ports" à select the IO port à click "OK" • Paper source (Media type) Back to Printers menu à Label Dr.
POSline ITT4300 Label Printer 6 • Orientation Printing Reference menu à click "Layout" à select "Portrait" or "Landscape" à click "OK" • Paper size • C.
POSline ITT4300 Label Printer 6 • Create a new size Printer menu à right click to get pop- up menu in blank space à select "Server Properties" à enter a form name for the new form in &q.
POSline ITT4300 Label Printer 6 For NT 4.0 and XP • Ports Properties menu à click "Ports" à select the IO port à click "OK" • Paper size • Orientation • Paper source (Media type) • Copies • Media choice (Accessory setting) Printers menu à Label Dr.
POSline ITT4300 Label Printer 6 • Paper/Output (Speed) • Print quality (Darkness) Default Document menu à click "Advanced" à click each item to select desired parameter à click "OK" • Create a new size Please refer to the procedure of create a new size on Win 2000.
POSline ITT4300 Label Printer 6 Troubleshooting Generally, when a malfunction or an abnormal condition occurs, the “READY” LED will keep blinking and printing and communication between the host and printer will stop. To understand what the problem, please check the LEDs first: A.
POSline ITT4300 Label Printer 6 B. Problems on ribbon Blinking Indicators READYand MEDIA LCD display MEDIA OUT Possible Problems Solutions Remarks Ribbons has run out Supply the ribbon roll Does not apply to direct thermal. If you use direct thermal, set bit 1 of DIP switch to OFF.
POSline ITT4300 Label Printer 6 D. Miscellaneous • The host shows “Printer Time out”. 1. Is the communication cable (parallel or serial) connected securely to your parallel or serial port on the PC and to the connector on the printer ? 2.
POSline ITT4300 Label Printer 6 . Adjust the Darkness (heat temperature). . Slow down the print speed. . Refer to the following paragraphs and clear the related modules. Recovery In order to continue your print jobs after any abnormal conditions have been recovered, simply press the CANCEL button or restart the printer.
POSline ITT4300 Label Printer 6 Caring for your Printer Before maintenance be sure to turn off the printer power. 1. Cleaning the print head( TPH) Turn off the printer, open the cover, print head module and remove the ribbon. Rub the print head with a piece of cotton which has been moistened with alcohol.
POSline ITT4300 Label Printer 6 Reference Technical Information 1. General Specification Specification Model ITT4300 Print method Direct thermal and thermal transfer Resolution 203 DPI (8 dots/mm) Printing width 0.1”~ 4.09” (25 ~104 mm) Printing length 0.
POSline ITT4300 Label Printer 6 2. Fonts, Bar Codes and Graphics Specification The specifications of fonts, bar codes and graphics depend on the printer emulation. The emulation is a printer programming language, through which the host can communicate with your printer.
POSline ITT4300 Label Printer 6 Printer Programming Language B, PPLB Specification Model ITT4300 General fonts 5 fonts with different point sizes Symbol sets (Code pages) 8 bits: code page 437, 850, 852, 860, 863 and 865. 7 bits: USA, British, German, French, Danish, Italian, Spanish, Swedish and Swiss.
POSline ITT4300 Label Printer 6 3. Interface Specifications Introduction This appendix presents the interface specifications of IO ports for the printer. These specifications include pin assignments, protocols and detailed information about how to properly interface your printer with your host or terminal.
POSline ITT4300 Label Printer 6 Connection with host: Host 25S Printer 9P Host 9S Printer 9P (PC or compatible) (PC or compatible) DTR 20 ………..1 DSR DTR 4 ………..1 DSR DSR 6 ………..6 DTR DSR 6 ………..6 DTR TX 2 ………..2 RX TX 3 ……….
POSline ITT4300 Label Printer 6 Data format: always 8 data bits, 1 start bit and 1 stop bit. Parity: always non parity Handshaking: XON/ XOFF as well as CTS/ RTS (hardware flow control).
POSline ITT4300 Label Printer 6 4. ASCII TABLE 0 1 2 3 4 5 6 7 0 NUL 0 @ P ` P 1 SOH XON ! 1 A Q a Q 2 STX “ 2 B R b R 3 XOFF # 3 C S c S 4 $ 4 D T d T 5 NAK % 5 E U e U 6 ACK & 6 F V f V 7 BEL ‘ 7 G W g W 8 BS ( 8 H X h X 9 ) 9 I Y i Y A LF * : J Z j Z B ESC + ; K [ k { C FF , < L l | D CR - = M ] m } E SO RS .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté POSline ITT4300B c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du POSline ITT4300B - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation POSline ITT4300B, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le POSline ITT4300B va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le POSline ITT4300B, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du POSline ITT4300B.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le POSline ITT4300B. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei POSline ITT4300B ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
