Manuel d'utilisation / d'entretien du produit KIRK 3040 du fabricant Polycom
Aller à la page of 52
Polycom ® KIRK 3040 User Guide 1402 1600-ed11:1402 1600-ed11.qxd 11-07-2008 14:38 Side 1.
Congratulations on your new KIRK 3040 handset Your new KIRK 3040 handset will provide you with the greatest possible degree of flexibility and mobility due to high battery capacity, practical weight, size and design.
Contents: 1. Construction .......................................................................... 4 2. Battery installation ................................................................ 5 3. Charging .............................................
4 1. Construction Key for internal calls (not used on KIRK Wireless Server 1500) Keyboard LOCK (Menu*) MENU key Display with backlight Recall key (MAIL key) SILENT (Menu#) ON/OFF HOOK key- also used as turn on key CONFIRMATION key - MUTE microphone. MUTE ringer when ringing.
5 2. Batter y installation Before using the telephone it is important that you connect the battery to the connector in the battery box. Assem- ble the back cover as described below and place the handset into the charger. 1. Push the back cover 5 mm towards the headset plug using your thumbs.
6 KIRK . . . . 3. Charging It takes approximately 3 1/2 hours to charge the handset from fully discharged to its full capacity.
7 4. Key Functions The handset has 21 keys: Two keys are placed at the right side for volume control. Press upper or lower key to change the volume. Each key-press turns volume one step up/down. “MENU” - Go to menu structure or exits the menu structure.
8 “INT” - If residential systems: Internal calls off hook, and internal recall if already offhook. (not used on KIRK Wireless Server 1500 and 500) “R” - If offhook: Recall.
9 5. T urning the handset ON/OFF ON: Press key for 1/2 second. When the handset is turned on the symbol is shown in the lower left corner of the display, if the handset is subscribed to a system. (For subscription, see 7.5.1) OFF: Press the “ ✓ ” (MUTE) key for 3 seconds.
10 6. Making a call For making or receiving calls the handset has to be subscribed to a system ( shown in display) (see chap. 7.5.1) Press the key, the icon in the display will flash until connection .
11 Redial: Redial / CLIP (CLIP = Calling Line Identification Presentation) stack: Press the < -key (redial-key) to enter the redial/CLIP stack Search for the number by using the < -key or the &g.
12 6.1. Receiving calls If the phone rings, the call can be answered by pressing the key. When ringing the LED flashes fast, and the display shows the CLIP (if presented). If it is an external call (or if no CLIP) the display shows “INCOMING CALL” It is possible to stop the ring signal without answering the call.
13 6.2 During conversation 6.2.1 Volume regulation: Use the two keys placed at the right side of the handset for volume control. 6.2.2 Microphone mute: Press the ✓ -key (mute-key), mic. muted is showed in the display. Press the ✓ -key (mute-key) to enable the microphone again.
14 MENU LOGIN MENU MSF FUNCTION PROFILE SET UP MENU EXT. SERVICE MENU BATTERY MENU PHONE BOOK MENU REDIAL MENU MAIL KIRK MENU 7. Menu structure Pressing the MENU-key, enters or exits the menu structure. It has to be used if a “NO” or “CLEAR” is wanted in the menu structure.
15 7.1 Using the alphanumeric keyboard The normal dialling keys (0-9) are used for writing the name to be placed in the telephone book. By pressing the keys a certain number of times the related letters or digits will appear in the display. Spaces are made by using the 0-key.
16 7.2 The key functions Key 1 Æ Ø Å @ Ä Ö ß Ü 1 2 A B C @ Ä Á À Â 2 3 D E F 3 4 G H I Ï Î 4 5 J K L 5 6 M N O Ö Ó Ò 6 7 P Q R S ß 7 8 T U V Ü Ú Ù Û 8 9 W X Y Z 9 0 Space . , _ - + : ? ! 0 ✱ * # / ( ) = & # Upper/lower-case 1402 1600-ed11:1402 1600-ed11.
17 7.3 Profile set-up To set-up the handset press “MENU”. You are now able to switch between the different settings. Press “ ” when you find the setting you wish to change (or see). Change the setting according to your needs, confirm with “ ” and you automatically go to the next setting.
18 Profile set-up (fig) KIRK telecom SET PROFILE BACKLIGHT SET PROFILE RINGER TONE SET PROFILE RINGER VOL SET PROFILE KEY CLICK SET PROFILE VIBRATOR SET PROFILE B-ANSWER SET PROFILE START VOL SET PROFILE OUT OF RANGE BACKLIGHT ON/OFF RINGER TONE 1,2..
19 7.4 Profile functions Backlight: Can be turned on/off using the > and <. Confirm with ( ✓ ). Ringertone: Scroll through the 9 different ringertones using > and <. Confirm with ( ✓ ). Ringer vol: Turn the volume up and down using > or <.
20 7.5 Menu subscription and login Password is factory set 0000 LOGIN SYSTEM1* CREATE SEARCH ID: 123456789012 REMOVE SYSTEM 4 123456789015 REMOVE SYSTEM 1* 123456789012 REMOVE SYSTEM 2 12345678901.
21 7.5.1 Create subscription To make subscriptions, the system must allow subscriptions to be made. Some systems also require an Access Code (AC). If more than one system currently permits subscription, you will need to know the ID of the system to which you wish to subscribe.
22 7.5.2 Login The handset can be subscribed to 10 different systems enabling you to use the same handset on 10 different systems. If you would like to change to another system, use the login menu to connect to another system number. The actual chosen system is shown with the red LED on.
23 7.5.3 Auto login The handset can be subscribed to 10 different systems. If Auto login is chosen from the menu, the handset automa- tically selects a system. The selected system is marked with an “A”. Please note: Auto login should only be used in separate systems without overlaps.
24 7.5.4 Remove subscription Subscriptions can be removed from the system in use and from the 9 other systems (if connected). Removing a sub- scription requires a password. Password is factory set at 0000. If the system in use is removed, it is necessary either to select one of the remaining systems or to subscribe to a new one.
25 7.6 Battery capacity In the battery menu it is possible to see the remaining battery capacity. For reading the correct capacity, the hand- set has to be removed from the charger for at least one hour. Press “Menu” and use the > or < keys to reach the Battery Menu.
26 7.7 Redial The handset has maximum 10 redial numbers and 10 Caller ID’s placed in the same stack. Each number is only represented once. Enter the redial menu by pressing ”< ”(Redial) from the standby text. Repeated presses at the “<” button turn backward through the dialled numbers and CLIP numbers (from newest to the oldest).
27 The Redial and CLIP stack Menu (fig) KIRK REDIAL 75602850 CLIP 898 DELETE? 899 STORE NO.? 899 DELETE ALL? NAME: BILL GATES 899 < 1402 1600-ed11:1402 1600-ed11.
28 7.8 Book Storing a number (max. 24 digits) in the telephone book is done by pressing the number to be stored (in on hook), then press the “>”- key followed by the “ ” key. The book can store up to 80 numbers with name. Typing of the name and a confirmation is required.
29 Read BOOK numbers: The telephone book is entered by pressing ”>”(book). For quick-search: press the first letter of the name (using 1-9)(see chap. 7.2). Call the displayed person by pressing the key. It is also possible to reach the telephone book menu in the main menu.
30 7.9 External services External services are facilities placed in the main system, and only available if the handset is subscribed to a KIRK solution.
31 7.10 MSF Functions MSF Functions are special functions, which are based on MSF (Message Service Function). The functions require special software in the main system.
32 7.11 Mail/Text Messages Available in systems configured with the possibility of sending text messages At the reception of a text message the envelope icon appears in the display. The envelope icon is indicating one or more unread messages. The text message is shown in the display, and when the message is read the envelope icon will disappear.
33 Read a mail Press the ”R”- (MAIL) key followed by the -key or enter the mail menu (in on hook condition). If the message includes more than 36 letters or digits, the message will run over 2 display screens. Use the > -key to scroll. To see the sender of the mail, press the -key.
34 Delete a mail Open the mail by pressing the R-key followed by the -key, press the -key again and use the < >-keys to find the delete feature, press the -key and the mail is deleted.
35 N25-01 04.38 308 Temp 45° .. L26-01 14.32 319 Hello, its me.. N28-01 15.46 236 FIRE ALARM.. WRITE NEW MAIL? √19-01 09.56 htj@kirktelec I am working.. √20-01 10.13 319 Call me.. N 206 Meet me at 9 .. Hello it’s me. Yo can meet me at 15 o’clock if you want to.
36 7.12 Menu language There are 6 predefined languages in the handset: English, German, French, Italian, Spanish and Dutch. Select the required language by pressing the -key. If a 7th language is present this will be shown as ”OPEN”. The ”OPEN” selection is a specific dealer language and is factory programmed.
37 8. Shor tcuts ”SILENT”: Press: MENU #. (No sounds) (Display shows SILENT) ”KEY LOCKED”: Press: MENU ✱ . (Display shows KEY LOCKED) “PHONE BOOK”: Press >(BOOK) key in standby. Name search in telephone book: Press the first letter in name and > (book) afterwards.
9. Information 9.1 Error tree Problem Check The telephone freezes. Remove and replace the battery pack. Press to turn on the telephone. The telephone does not ring. Check whether the ringer is SILENT or RINGER VOL. is OFF. The telephone cannot find a system ID at Check whether the system is set to allow subscriptions.
39 9.2 Error information Improper function of the handset might be related to the installation of the KIRK solution or failures related to the main system. Before declaring a handset for repair be sure that the main system is operating properly. 9.3 Warranty The handset is covered by a normal warranty-solution, except the battery.
40 9.4. Technical information Approvals Acoustics: TBR 10 Electrical: TBR 6 (DECT RF) Access profile: TBR 22 (GAP) EMC: ETS 300 329 (CE labelling) EN 301 406 EN 60950-1 EN 301 489-1 EN 301 489-6 EN 50.
41 9.5 International Regulatory and Product Information This KIRK 3040 Handset has been marked with the CE mark. This mark indicates compliance with EEC Directives 89/336/EEC, 73/23/EEC 1999/5/EC. A full copy of the Declaration of conformity can be obtained from Polycom Ltd, 270 Bath Road, Slough, Berkshire, SL1 4DX, UK.
Eesti [Estonian]: Käesolevaga kinnitab Polycom (UK) Ltd seadme KIRK 3040 handset vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
Lietuvių [Lithuanian]: Šiuo Polycom (UK) Ltd deklaruoja, kad šis KIRK 3040 handset atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
The WEEE Marking on this equipment indicates that the product must not be disposed of with unsorted waste, but must be collected separately. Slovensky [Slovak]: Polycom (UK) Ltd týmto vyhlasuje, že KIRK 3040 handset spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.
9.5.1 Important Safety Instructions Before using your telephone equipment, you should always follow basic safety instruction to reduce the risk of fire, elec-trical shock and injury to persons, and damage to property. 1. Read and understand all instructions.
11. Avoid using telephone during an electrical storm. There may be a risk of electrical shock from lightning. 12. Do not use the telephone to report a gas leak in the vicinity of the leak. 13. Do not place the base or charger near microwave ovens, radio equipment, or non-ground connected televisions.
Battery Precautions 1. Periodically clean the charge contacts on both the charger and handset. 2. Exercise care in handling batteries in order not to short the batteries with conducting materials such as rings, bracelets, and keys. The batteries or conducting material may overheat and cause burns or fire.
FCC Note: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE EMC: Cet appareil a été soumis à un essai et jugé conforme aux normes régissant les limites établies pour un dis-positif numérique de classe B, conformé-ment aux règlements locaux.Ces limites visent à assurer une protection raisonna-ble contre des interférences pouvant nuire a l'appareil utilisé dans un secteur rési-dentiel.
9.5.2 Limited Warranty This limited, non-transferable warranty is provided to the original purchaser. The product is warranted to be free from defects in materials and workmanship under normal installation, use and service for a period of one (1) year from the date of purchase as shown on the purchaser's receipt.
is used in a country in which it is not registered for use, or if it is used in a country for which it was not designed. Due to varia- tions in telephone systems and communications laws, this product may be illegal for use in some countries.
1402 1600-HD . ED11 . A. Rasmussens Bogtrykkeri, Ringkøbing ©2007 Polycom, Inc. All rights reserved. Specifications subject to change without notice. Polycom Headquarters 4750 Willow Road Pleasanton CA 94588 (T) Polycom (Denmark) Langmarksvej 34 DK-8700 Horsens Tel.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Polycom KIRK 3040 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Polycom KIRK 3040 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Polycom KIRK 3040, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Polycom KIRK 3040 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Polycom KIRK 3040, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Polycom KIRK 3040.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Polycom KIRK 3040. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Polycom KIRK 3040 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
