Manuel d'utilisation / d'entretien du produit 72-1065-09 du fabricant Polycom
Aller à la page of 46
NetLink e340/h340/i640 Wireless Telephone NetLink T elephony Gatewa y and Sp ectr aLink Radio Protocol (SRP) Conf iguration and Adminis tr ation Part Number: 72-1065- 09 Issue J.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.doc Page 2 Notice SpectraLink Corporation has prepared this document for use by SpectraL ink personnel and customers.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.doc Page 3 Note concerning the NetLink Wireless Telephones: This device complies with Part 15 of the FCC Rules.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.doc Page 4 Table of Contents 1. About This Document 5 1.1 SpectraLink Corporation Model Numbers 5 1.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.doc Page 6 2. NetLink Wireless T elephone Over view The NetLink e340, h340 and i640 Wireless Telephones are mobile handsets for workplace telephone systems.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.doc Page 7 The NetLink e340/h340/i640 Wireless Telephones support Wired Equivalent Privacy (WEP) as defined by the 802.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.doc Page 8 2.4 NetLink Wireless Telephone Specifications NetLink e340/h340 Wireless Telephone 1 NetLink i640 Wireless Telephone Radio frequency 2.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.doc Page 9 2.5 Handset Display See the LinkPlus Interface Guide for your PBX for information about how the handset emulates the features of the PBX ut ilized at your site.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.doc Page 10 handset will follow the protocol command provided by the PBX if the user selects PBX cadence described in section 3.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.doc Page 11 2.7 Handset Modes Standby (on-hook) In the standby mode the handset is waiting for an incoming call or for the user to place an outgoing call.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.doc Page 12 2.8 Handset Displays Status display Displays information from the PBX in two lines of text and displays available softkeys in the softkey display area.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.doc Page 14 Entering and editing Admin menu options An asterisk (*) next to an option on the display indicates that the option is selected.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.doc Page 16 Phone Config License Option License Option lets you select the VoI P pr otocol that your site is licensed to download and run.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.doc Page 17 components on a different subnet. If c onfigured on the DHCP server, use option 3 for the Default Gateway and option 1 for the Subnet Mask.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.doc Page 18 For WEP, WPA-PSK and WPA2 PSK set each of the following options to match exactly the settings in your APs.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.doc Page 20 Restore Defaults The Restore Defaults option will set all user and administrative parameters except License Option to their factory defaults.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.doc Page 22 Main Menu Scroll through the list of options by pressing the Up and Down side buttons.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.doc Page 23 PBX : PBX determines ring cadence (e.g. the PBX may send rings that differentiate between internal and external calls.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.doc Page 24 Display Contrast The display may need to be adjusted for different lighting situations.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.doc Page 25 Channel The user may enable any PTT channel that has been allowed in the Admin menu by entering the corresponding number from the keypad.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.doc Page 26 4. License Management The NetLink Wireless Telephone system supports a number of different IP protocol integrations.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.doc Page 27 4.2 Configuration Process 1. Download the latest NetLink Wireless Telephone software from http://www.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.doc Page 28 5. T esting a Handset Verify proper registration and operation of each handset by performing the following tests on the handset in an active wireless area.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.doc Page 30 beacon interval of 200ms. The third has a si gnal strength of –56dbm, is configured on channel 11 with a beacon interval of 100ms.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.doc Page 31 Solving coverage issues Coverage issues are best resolved by a dding and/or relocating access points.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.doc Page 34 6.3 Syslog Mode A syslog server must be present on the network in order for the handset to send the log messages and have them saved.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.doc Page 38 9. T r oubleshooting NetLink e340, h340, and i640 Wireless Telephones can exhibit transmission problems in several ways.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.doc Page 39 or access point. See the appropriate LinkPlus Interface Guide or the Configuration Guide for the access point in use at the site.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.doc Page 41 Message Description Action (battery icon), Battery Low, beep (audio) Low battery.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.doc Page 42 Message Description Action DHCP Error (1-5) DHCP Error 1 The handset cannot l ocate a DHCP server.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.doc Page 43 Message Description Action Files too big Handset software download files ar e incorrect or corrupted.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.doc Page 44 Message Description Action No IP Address Invalid IP. Check the IP address of the handset and re- configure if requ ired.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.
SpectraLink Corporation Configuration and Adminis tration–NetLink e340/h340/ i640 Wireless Telephone NetLink Telephony Gateway and SpectraLink Radio Protocol PN: 72-1065-09-J.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Polycom 72-1065-09 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Polycom 72-1065-09 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Polycom 72-1065-09, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Polycom 72-1065-09 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Polycom 72-1065-09, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Polycom 72-1065-09.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Polycom 72-1065-09. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Polycom 72-1065-09 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
