Manuel d'utilisation / d'entretien du produit m200 du fabricant Atrust
Aller à la page of 121
W i ndow s® MultiP oi nt™ Server Solution Us e r’ s M anu al V ersion 1.01 © 2011 Atrust Comput er Corp ..
i C opyright and T r ademark Statemen ts © 2011 Atrust Comput er Corp . All rights reserved. This document contains proprietary information that is prot ec ted by copyright. No part of this document may be photocopied, r eproduced, or translat ed to another language without the prior written consent of Atrust C omputer Cor p.
ii About This U ser ’ s Manual This manual provides basic inf ormation on how to set up and use Atrust int egrated system solution f or Window s® MultiPoint™ Server 2011. Manual Structure and Subjec ts Chapter Subject 1 Provides an overview of a Windows ® MultiPoint™ Serv er system.
iii Safety and Regulatory Information Regulatory Statement F ederal Communications C ommission Interference Statement This equipment has been tested and f ound to comply with the limits for a Class B dig ital device, pursuant to P art 15 of the FCC Rules .
iv W ARNING • F or safety , do not make mechanical or electrical modi cations to the equipment. • Do not remove equipment c overs and access an y of the components inside the equipment. Any access inside the equipment without an authoriz ed or certi ed technician may cause serious injuries and damage.
v T able of C ontents Cop yright and T rademark Statemen ts i Limitation of Liability i T rademark statements i About This User’ s Manual ii Manual Structure and Subjects ii Notes, Tips, and W arnings ii Style Conventions ii Safety and Regulatory Information iii Regulatory Statement iii Safety Information iii 1 Overview 1 1.
vi 4 Managing Y our MultiPoint™ Server S ystem 45 4.1 MultiP oint Manager 47 4.1.1 MultiPoint Manager Overview 47 4.1.2 Available T asks at a Glance 48 4.2 P er forming General A dministrativ e T asks 49 4.2.1 Home T ab Over view 49 4.2.2 Available T asks at a Glance 50 4.
vii 4.6.8 Changing the P assword for a LAN Station 88 4.6.9 Assigning a LAN Station to a L ocal Host Ser ver 88 4.6.10 Clearing the Host Ser ver Assignment for a LAN Station 88 4.7 Advanc ed Settings for MultiP oint Manager 89 4.7.1 Safe Mode 89 4.7.2 Adjusting the Safe Mode Settings 89 4.
viii.
Overview 1 This chapter pro vides an overview of a W indows® MultiP oint™ Ser ver system. 1.1 Introduction Windows ® MultiPoint Serv er 2011 and Atrust shared resource solution 3 1.2 Features the features of Atrust system solution 3 1.3 Package Contents check your package contents 4 1.
Overview Introduction 3 1.1 Introduction Window s® MultiPoint™ Server 2011 is a new shared resource technology . This Windo ws-based operating system enables a host server to power multiple and independent stations, allo wing users to share the computing pow er of one single server .
Overview Package Contents 4 1.3 P ackage C ontents Please check your package contents. Ensure that all of the it ems are present in your package(s). If any items are missing or damaged, please contact your dealer immediately .
Overview Package Contents 5 Atrust m202 Atrust m202 1 USB cable AC adaptor VESA mount kit CAL with the COA label Quick Setup Guide 2 1 One USB cable, AC adaptor , and CAL (Client Access License) are pro vided for each Atrust m202. 2 One copy of Quick Setup Guide is provided for each client package.
Overview Package Contents 6 Y our audio hub pack age comes with the following items . The number of USB audio hubs and accessories ma y var y , depending on your package deal. Atrust m20h Atrust m20h 1 USB cable VESA mount kit Quick Setup Guide 2 1 One USB cable is provided for each Atrust m20h.
Overview Exterior Views 7 1.4 Exterior V iew s Atrust st100 server Rear Panel Right rear view Right front view Left front view Fr ont Panel Left front view Fr ont Panel Co vers push to open covers.
Overview Exterior Views 8 Atrust m200 Atrust m202 Atrust m220 Left front view Right rear view Fr ont Panel Kensington lock slot Rear Panel Left front view Fr ont Panel Right rear view Kensington lock .
Overview Exterior Views 9 Atrust t50 Atrust m20h Left front view Fr ont Panel Right rear view Kensington lock slot Rear Panel Left front view Fr ont Panel Right rear view Kensington lock slot Rear Pan.
Overview Panel Components 10 1.5 P anel C omponents Front Panel Components No. Component Sign Name Description 1 Headphone port Connects to a set of headphones or a speaker system. 2 Microphone port Connects to a microphone. 3 USB port Connects to a client or USB device.
Overview Panel Components 11 Rear Panel Components No. Component Sign Name Description 1 USB port Connects to a client or USB device. 2 USB port Connects to a keyboard. 3 USB port Connects to a mouse. 4 LAN port Connects to a Gigabit switch or a LAN. 5 Serial port Connects to a serial port device such as a printer .
Overview Panel Components 12 Front Panel Components No. Component Sign Name Description 1 Power LED Indicates the status of power . 1 2 Microphone port Connects to a microphone. 3 Headphone port Connects to a set of headphones or a speaker system. 4 USB port Connects to a USB device.
Overview Panel Components 13 Rear Panel Components No. Panel Component Sign Component Name Description 8 VGA port Connects to a monitor . 9 DC IN Connects to an AC adaptor . 10 Power switch Press to turn on/off the client. 11 LAN port Connects to a host server through a Gigabit switch.
Overview Panel Components 14 Rear Panel Components No. Panel Component Sign Component Name Description 6 DC IN Connects to an AC adaptor . 7 LAN port Connects to a local area network. 8 USB port Connects to a mouse. 1 9 USB port Connects to a keyboard.
Overview LED Indicators 15 1.6 LED Indicat ors Atrust st100 server is equipped with LED indicators for the states of electricity supply , CPU and system fans, temperature , memor y , and the hard disk drive . The meanings of LED signals ar e described as follows: Atrust st100 LED Signal Meaning Power LED Blue The system is in Power -on mode.
Overview 16.
Setting Up Y our MultiP oint™ Ser ver S ystem 2 This chapter giv es detailed instructions on how to set up your MultiPoint™ Server system. 2.1 Positioning Your Server how to position your Atrust st100 19 2.2 Positioning Your Clients how to position your clients 20 2.
Setting Up Y our MultiPoint™ Serv er System Positioning Your Server 19 2.1 P ositioning Y our Ser ver T wo placement wa ys are available f or your Atrust st100 server – upright or horizontal. Y ou can choose one which suits your needs best. Upright Placement T o position your Atrust st100 uprightly , please follow the steps belo w : 1.
Setting Up Y our MultiPoint™ Serv er System Positioning Your Clients 20 2.2 P ositioning Y our Clients Y ou can simply position a client on a desk or a desired place.
Setting Up Y our MultiPoint™ Serv er System Getting Connected 21 2.3 Getting Connected A MultiPoint™ Server system comprises a single host ser ver and at least one station. A local station consists simply of a station hub, keyboar d, mouse, and monit or .
Setting Up Y our MultiPoint™ Serv er System Getting Connected 22 2.3.1 A General Rule for Making USB based Connections F or optimal per formance , when connecting stations to the ser ver USB ports, it’ s recommended to divide the connections evenly across the port groups ( 1 and 2 ).
Setting Up Y our MultiPoint™ Serv er System Getting Connected 23 2.3.2 Making Connections for Atrust m200 T o make connections for your A trust m200, please do the following: NO TE • F or optimal per formance , please refer to section “2.3.1 A General Rule for Mak ing USB based Connections” on page 22.
Setting Up Y our MultiPoint™ Serv er System Getting Connected 24 2.3.3 Making Connections for Atrust m202 T o make connections for your A trust m202, please do the following: NO TE • F or optimal per formance , please refer to section “2.3.1 A General Rule for Mak ing USB based Connections” on page 22.
Setting Up Y our MultiPoint™ Serv er System Getting Connected 25 2.3.4 Making Connections for Atrust m220 T o make connections for your A trust m220, please do the following: 1. Connect the host ser ver to a Gigabit swit ch with an Ethernet cable. 2.
Setting Up Y our MultiPoint™ Serv er System Getting Connected 26 NO TE • Normally , your Atrust m220 will perform network environment det ection and choose an appropriate IP address aut omatically . In case that you need to adjust the network con guration for your m220, please refer t o section “4.
Setting Up Y our MultiPoint™ Serv er System Getting Connected 27 2.3.5 Making Connections for Atrust t50 T o make connections for your A trust t50, please do the following: 1. Connect the host ser ver ( Atrust st100) to your local network with an Ethernet cable .
Setting Up Y our MultiPoint™ Serv er System Getting Connected 28 2.3.6 Making Connections for Atrust Thin Client F amily T o make connections for your A trust thin client, please do the following: 1. Connect the host ser ver ( Atrust st100) to your local network with an Ethernet cable .
Setting Up Y our MultiPoint™ Serv er System Getting Connected 29 NO TE • T o use your Atrust thin client, your local ar ea network must have deploy ed a DHCP server to automatically assign your client an IP address . Please consult your network administrator for details .
Setting Up Y our MultiPoint™ Serv er System Getting Connected 30 Esc F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 Print Screen Insert Backspace Enter Enter Alt Ctrl Caps Lock Tab Alt Ctrl Page Up Page Dow.
Setting Up Y our MultiPoint™ Serv er System Getting Connected 31 2. Connect a keyboard and mouse to Atrust m20h as nec essar y control devices . 3. Connect a monitor to Atrust st100 f or Atrust m20h as the necessary display device. 4. Connect the monitor to a pow er outlet using the power cord supplied with that monit or .
Setting Up Y our MultiPoint™ Serv er System 32.
Getting Y our S ystem Ready f or Use 3 This chapter pro vides information on how to get y our MultiPoint™ Server system ready for use . 3.1 Powering Up Your MultiPoint™ Server System turning on your system step by step 35 3.2 Initial Setup for Your MultiPoint™ Server System what to do to get your system ready for use 35 3.
Getting Y our System R eady for Use Powering Up Your MultiPoint™ Server System 35 3.1 P ow ering Up Y our MultiP oint™ Ser ver S ystem After setting up hardware , now you need to po wer up your system and perform initial setup to get your sy stem ready for use .
Getting Y our System R eady for Use Initial Setup for MultiPoint™ Server 2011 36 3.3 Initial Setup for MultiP oint™ Ser ver 2011 When booting up your system f or the rst time, y ou need to go .
Getting Y our System R eady for Use Initial Setup for MultiPoint™ Server 2011 37 3. A new page appears to prompt y ou to read and sign the license t erms. Read the license terms, check I ac cept the license terms , and then click Start . 4. A new screen appears to pr ompt you to change your administrativ e password.
Getting Y our System R eady for Use Initial Setup for MultiPoint™ Server 2011 38 6. A screen appears with a message to indicate that y our password has been changed succ essfully . Click OK to log on to the system with y our administrative account. 7.
Getting Y our System R eady for Use Associating Your Stations 39 3.4 Associating Y our Stations MultiPoint™ Server system is a multiuser computing en vironment. Typically , a signi cant number of monitors , keyboards, and mic e are connected to a single host server directly or indirectly.
Getting Y our System R eady for Use Initial Setup for Your Atrust t50 40 3.6 Initial Setup for Y our A trust t50 T o con gure RDP connection settings for your Atrust t50, please do the f ollowing: 1. Click ST ART > Settings > Atrust Client Setup .
Getting Y our System R eady for Use Create a Remote Desktop Session Using Your Atrust t50 41 TIP • In case that you need to manually nd out the IP address of a host ser ver , please do the following: 1. Click Star t > All Progr ams > Acc essories > Command Prompt .
Getting Y our System R eady for Use Create a Remote Desktop Session Using Your Atrust Thin Clients 42 Con guring RDP c onnection settings for Linux-based thin clients T o con gure RDP connection settings for your Linux-based thin clients, please do the f ollowing: 1.
Getting Y our System R eady for Use System Modes 43 1. Click the shortcut for MultiPoint™ Remot e Desktop sessions on the Desktop . The Logon scr een for MultiPoint™ Sev er 2011 appears. 2. Log in to the MultiP oint™ S erver system with a user account.
Getting Y our System R eady for Use 44.
Managing Y our MultiP oint™ Ser ver S ystem 4 This chapter pro vides basic information on how to manage your system with the help of MultiP oint Manager . 4.1 MultiPoint Manager an overview of the system management application available tasks at a glance 47 48 4.
Managing Y our MultiPoint™ Serv er System MultiPoint Manager 47 4.1 MultiP oint Manager Y our MultiPoint™ Ser ver syst em comes with the MultiPoint Manager application, helping you manage servers, stations, users, and deskt op sessions.
Managing Y our MultiPoint™ Serv er System MultiPoint Manager 48 NO TE • W e will introduce safe mode settings in section “4.7 Advanced Settings for MultiPoint Manager” on page 89. • The available options on a Speci c T ask menu may var y , depending on the selected tab and the selected item.
Managing Y our MultiPoint™ Serv er System Performing General Administrative Tasks 49 4.2 P er forming General A dministra tive T asks 4.2.1 Home T ab Overview Home tab enables you to perform general administrative tasks. T o access the content of Home tab , click the tab on MultiPoint Manager .
Managing Y our MultiPoint™ Serv er System Performing General Administrative Tasks 50 4.2.2 Av ailable T asks at a Glanc e No. Available Task Section Page 1 add or remove manageable MultiP oint™ Server systems 4.2.3 51 2 visit MultiPoint™ Serv er of fi cial website 4.
Managing Y our MultiPoint™ Serv er System Performing General Administrative Tasks 51 4.2.3 Managing Remote MultiPoint Server Sy stems MultiPoint Manager enables y ou to manage not only the local system (the system that y ou are directly connected to), but also other systems o ver your network.
Managing Y our MultiPoint™ Serv er System Performing General Administrative Tasks 52 5. On Home tab, the status c olumn of the newly added system shows Initializing c onnection and a W indows Security window appears to prompt you f or an administrative account to log in t o that system.
Managing Y our MultiPoint™ Serv er System Performing General Administrative Tasks 53 4.2.5 Adjusting General Sy stem S ettings The Edit server settings option enables you to adjust o verall settings for a MultiP oint™ Ser ver syst em. The following settings are available: Available System Settings No.
Managing Y our MultiPoint™ Serv er System Performing General Administrative Tasks 54 TIP • The option Assign a unique IP to each station may be inactive and with a message as shown: T o make this option active, please ref er to “4.7.3 Assigning a Unique IP to each Station ” on page 90.
Managing Y our MultiPoint™ Serv er System Performing General Administrative Tasks 55 W ARNING • Switching the system mode will end all user sessions . Ensure all users have sa ved their work to prev ent data loss. NO TE • F or information on both system modes, please r efer to “3.
Managing Y our MultiPoint™ Serv er System Performing General Administrative Tasks 56 4.2.10 Removing Client Acc ess Licenses T o remov e client access licenses from a MultiP oint™ Ser ver system, please do the following: 1. On Home tab, click t o select the desired system.
Managing Y our MultiPoint™ Serv er System Performing General Administrative Tasks 57 4.2.12 Remote MultiPoint Manager and Remote U ser Sessions The Sav e connection settings to le option enables you to log in to a sy stem remotely as a user or to manage a system remot ely as an administrator .
Managing Y our MultiPoint™ Serv er System Performing General Administrative Tasks 58 NO TE • A Remote Desktop capable computer is a c omputer which supports RDP (Remote Desktop Pr otocol). In par ticular , All Remote Desktop capable versions of Windo ws are installed with a RDP client software ref erred to as Remote Desktop C onnection.
Managing Y our MultiPoint™ Serv er System Performing General Administrative Tasks 59 4.2.14 Creating a Remote User Session T o create a user session r emotely , please do the following: 1. On Home tab, click t o select the desired system. 2. Click Save c onnection settings to le .
Managing Y our MultiPoint™ Serv er System Performing General Administrative Tasks 60 6. The Windows Security window appears. Type y our user name and password , and then click OK to continue. TIP • Y ou can log in to a system using an administrativ e account as well as a standard account.
Managing Y our MultiPoint™ Serv er System Performing General Administrative Tasks 61 4.2.15 Reconnec ting a Remote Sy stem T o reconnect a remotely managed sy stem, please do the following: NO TE • A remotely managed system is a sy stem that you add to Home tab f or fur ther management through the Add or r emove computers f eature.
Managing Y our MultiPoint™ Serv er System Managing User Accounts 62 4.3 Managing User A ccounts 4.3.1 Users T ab Overview Users tab enables you t o manage user accounts. T o access the content of U sers tab, click the tab on MultiP oint Manager . Users T ab O verview Interface Elements No.
Managing Y our MultiPoint™ Serv er System Managing User Accounts 63 4.3.2 Av ailable T asks at a Glanc e No. Available Task Section Page 1 add a user account 4.3.3 64 2 change the full name for a user account 4.3.4 66 3 change the password for a user account 4.
Managing Y our MultiPoint™ Serv er System Managing User Accounts 64 4.3.3 Creating User A ccoun ts T o add a user account, please do the f ollowing: NO TE • Y our MultiPoint™ Server system does not associate a user ac count with any speci c station.
Managing Y our MultiPoint™ Serv er System Managing User Accounts 65 3. T ype the desired user name , full name (optional), and password. Click Ne xt to continue . 4. A new page appears to prompt y ou to choose the level of access f or this account. Click to check Standard user or Administra tive user , and then click Next to continue.
Managing Y our MultiPoint™ Serv er System Managing User Accounts 66 4.3.4 Changing the Full Name f or a User Ac count T o change the full name for an acc ount, please do the following: NO TE • The full name for an acc ount is di erent from the user or account name of that account.
Managing Y our MultiPoint™ Serv er System Managing Stations 67 4.4 Managing Stations 4.4.1 Stations T ab Overview Stations tab enables you to manage stations . T o access the cont ent of Stations tab, click the tab on MultiP oint Manager . Stations T ab Overview Interface Elements No.
Managing Y our MultiPoint™ Serv er System Managing Stations 68 4.4.2 Av ailable T asks at a Glanc e No. Available Task Section Page 1 suspend all stations 4.4.3 69 2 log off all stations 4.4.4 69 3 identify all stations 4.4.5 70 4 stop identifying all stations 4.
Managing Y our MultiPoint™ Serv er System Managing Stations 69 4.4.3 Suspending Stations Suspending a station would suspend the user session on the station. The user session remains active in the system ’ s memory and can be accessed at a later time when the user logs in again.
Managing Y our MultiPoint™ Serv er System Managing Stations 70 Logging o a speci c station T o log o a speci c station, please do the following: 1. On Stations tab , click to select the desired station. 2. Click Log o . The Log O window appears with a warning message notifying you of possible data loss.
Managing Y our MultiPoint™ Serv er System Managing Stations 71 Identifying a speci c station T o identify a speci c station, please do the f ollowing: 1.
Managing Y our MultiPoint™ Serv er System Managing Stations 72 2. Click Con gure auto-logon . The Con gure A uto-Logon window appears. 3. Click to check Auto-logon using the following inf ormation , type the desired account name and passwor d, and then click OK to apply .
Managing Y our MultiPoint™ Serv er System Managing Stations 73 3. Add another set of keyboard and mouse in either of the f ollowing two ways: • If the split station is created by an Atrust m202, y ou can connect a keyboard and mouse to the USB ports directly on the front panel of Atrust m202.
Managing Y our MultiPoint™ Serv er System Managing User Sessions 74 4.5 Managing User Sessions 4.5.1 Desktops T ab Overview Desktops tab enables you to manage user sessions . T o access the cont ent of Desktops tab, click the tab on MultiPoint Manager .
Managing Y our MultiPoint™ Serv er System Managing User Sessions 75 4.5.2 Av ailable T asks at a Glanc e No. Available Task Section Page 1 block/Unblock all stations 4.5.3 76 2 limit web access on all user sessions 4.5.4 77 3 set a message for users of blocked stations 4.
Managing Y our MultiPoint™ Serv er System Managing User Sessions 76 4.5.3 Blocking Stations Blocking a station enables you to display a customizable message in full screen and pr event the user from acc essing the station. Y ou can use this feature to pause users ’ work on stations and switch to another planned activity.
Managing Y our MultiPoint™ Serv er System Managing User Sessions 77 4.5.4 Limiting W eb Ac cess on User Sessions Limiting W eb access allows y ou to impose W eb access limits on user sessions.
Managing Y our MultiPoint™ Serv er System Managing User Sessions 78 4.5.6 Changing the Size of the Monitoring Screen On Desktops tab , you can monitor activities on all stations to stop improper use of stations . Three di erent sizes of the monitoring screen ar e available on MultiP oint Manager .
Managing Y our MultiPoint™ Serv er System Managing User Sessions 79 4.5.7 Con guring W eb Limiting Con guring W eb limiting enables you to set web access limits , which you can choose to impose on the selected user sessions at a later time. T o con gure web limiting, please do the f ollowing: 1.
Managing Y our MultiPoint™ Serv er System Managing User Sessions 80 2. Click Project my sta tion to selec ted stations . 3. Y our session is projec ted to the selected station(s) within seconds .
Managing Y our MultiPoint™ Serv er System Managing User Sessions 81 NO TE • Monitoring an administrator session is not allowed in MultiP oint™ S ever systems .
Managing Y our MultiPoint™ Serv er System Managing User Sessions 82 4.5.13 Launching Applications on a Station As an administrator , you can launch an application on a selected station, including opening a folder with Windows Explorer , a document with the associated program, or acc essing Internet resources with the default Web br owser .
Managing Y our MultiPoint™ Serv er System Managing LAN-based Stations 83 4.6 Managing LAN-based Stations 4.6.1 LAN Stations tab O verview LAN Stations tab enables you to manage LAN based stations ( Atrust m220 based). T o access the content of LAN Stations tab , click the tab on MultiPoint Manager .
Managing Y our MultiPoint™ Serv er System Managing LAN-based Stations 84 4.6.2 Av ailable T asks at a Glanc e No. Available Task Section Page 1 scan to fi nd free and manageable LAN stations 4.6.3 85 2 rename a free and manageable LAN station 4.6.4 85 3 assign an IP address for a LAN station 4.
Managing Y our MultiPoint™ Serv er System Managing LAN-based Stations 85 4.6.3 Sc anning F ree LAN Stations To nd free LAN stations over your local network, please do the follo wing: 1. On LAN Stations tab , click Scan sub-tab, and then click Start scan .
Managing Y our MultiPoint™ Serv er System Managing LAN-based Stations 86 1. On LAN Stations tab , click Scan sub-tab, and then click to select the desired free LAN station. 2. Click Network . The Network Setting window appears. 3. Click to check Use DHCP , and then click Submit t o apply .
Managing Y our MultiPoint™ Serv er System Managing LAN-based Stations 87 4.6.6 Restar ting a LAN Station T o restart your LAN station, please do the following: NO TE • Y ou are not allow ed to restart a managed LAN station (assigned to a MultiPoint™ Ser ver system).
Managing Y our MultiPoint™ Serv er System Managing LAN-based Stations 88 4.6.8 Changing the Passwor d for a LAN Station T o change the password f or a LAN station, please do the following: 1. On LAN Stations tab , click Scan sub-tab, and then click the desired fr ee LAN station.
Managing Y our MultiPoint™ Serv er System Advanced Settings for MultiPoint Manager 89 4.7 Adv anced Settings for MultiP oint Manager 4.7.1 Safe Mode Y ou can change MultiPoint Manager to Safe mode to pr event abnormalities in your syst em(s) due to the improper use of MultiP oint Manager .
Managing Y our MultiPoint™ Serv er System Advanced Settings for MultiPoint Manager 90 4.7.3 Assigning a Unique IP to each Station Y our Edit S erver Settings window (see “4.
Managing Y our MultiPoint™ Serv er System Adding New Stations 91 9. Relaunch MultiP oint Manager . The option Assign a unique IP to each station is then active and a vailable. 10. Click to check Assign a unique IP to each station . 11. Repeat step 4 through 5 to nd out the disabled net work adapter .
Managing Y our MultiPoint™ Serv er System Installing Applications for a Multi-user Environment 92 4.9 Installing Applications f or a Multi-user En vironment Y our MultiPoint Ser ver syst em(s) is a multiuser solution.
Managing Y our MultiPoint™ Serv er System Installing Applications for a Multi-user Environment 93 6. The Brow se window appears. Use the Na vigation pane on the left side of the window to look for the desired installation program.
Managing Y our MultiPoint™ Serv er System 94.
Maintaining Y our MultiP oint™ Ser ver S ystem 5 This chapter giv es instructions on how to return your operating system to its factory default state.
Maintaining Y our MultiPoint™ Serv er System Two Ways to Restore Your Operating System 97 5.1 T wo W ay s to Restore Y our Opera ting Sy stem In case that you want to return your operating sy stem to its factor y default state, A trust o ers two ways to restor e your system: thr ough a function key on the keyboard or through a Recov er y DVD .
Maintaining Y our MultiPoint™ Serv er System Restoring Your Operating System by the function key 98 NO TE • If you press F9 more than one time , the following screen ma y appear: Highlight to select Recovery using the arrow keys , and then press ENTER .
Maintaining Y our MultiPoint™ Serv er System Restoring Your Operating System by the function key 99 NO TE • Restoring your operating system thr ough the function key requires that your disk partition layout remains unchanged as the factor y default settings.
Maintaining Y our MultiPoint™ Serv er System Restoring Your Operating System from the Recovery DVD 100 9. When the system rec overy is done, a completion message appears. Click the Reboot button t o restar t your system. If you don ’t click the Reboot button, the system will restart automatically within seconds.
Maintaining Y our MultiPoint™ Serv er System Restoring Your Operating System from the Recovery DVD 101 6. The Atrust S ystem Recovery window appears. 7. Click the drop-down menu to select the preferred language used during the rec overy process, and then click Next to continue.
Maintaining Y our MultiPoint™ Serv er System Restoring Your Operating System from the Recovery DVD 102 9. A warning message appears again to prompt y ou to back up impor tant data. 10. Click the drop- down menu to select the interface language for your operating system, and then check I hav e backed up important les and ready to star t .
Maintaining Y our MultiPoint™ Serv er System Restoring Your Operating System from the Recovery DVD 103 13. Follo w the on-screen instructions to make initial settings and change your administrative passw ord to log on to the system. NO TE • F or more details about the initial setup, please r efer to “3.
Maintaining Y our MultiPoint™ Serv er System 104.
T roubleshooting 105 T roubleshooting The follo wing table provides troubleshooting inf ormation on management and use of a MultiPoint Server system. MultiPoint Manager Problem Possible Solution Why cannot I see Home / Desktops / Stations / Users / LAN Stations tab on MultiPoint Manager? The tab(s) is hidden and inaccessible.
T roubleshooting 106 When the system is powered up, I turn off my A trust m220 through its power switch and some unexpected results occur . What should I do? When the system is powered up or when users log in to the system, please don’t turn off your Atrust m220.
T roubleshooting 107 User Session Problem Possible Solution Why cannot a user log in to a MultiPoint Serv er system? The user got a message stating: “The number of connections to this computer is limited and all connections are in use right now . T ry connecting later or contact your system administrator .
108.
Speci fi cations 109 Speci cations Atrust st100 ser ver Processor Intel ® Core™ i3-550 3.2 GHz / Intel ® Xeon ® X3440 2.53 GHz / Intel ® Xeon ® X3470 2.93 GHz Chipset Intel ® 3420 Graphics card nVIDIA ® GeForce ® 8400GS Memor y 4 memory slots supporting up to 4 GB DDR3 ECC UDIMM (max.
Speci fi cations 110 Atrust m200/m202/m220 zero clients Product Name Atrust m200 Atrust m202 Atrust m220 Connection type USB 2.0 (B type) USB 2.0 (B type) Gigabit Ethernet (RJ-45) License Windows ® .
Speci fi cations 111 Atrust t50 thin client Processor TI ARM 1.0GHz Flash Memory NAND Flash 256 MB Random Access Memory Mobile DDR 256 MB Operating System Atrust ARM Linux Resolutions 800 x 600 / 102.
112.
Index 113 Index A adding CAL (Client Access License) 55 adding new stations 91 adding or removing manageable MultiPoint Server systems 51 adjusting general system settings 53 Automatic Windows Error R.
Index 114 MultiPoint Server system Atrust solution 3, 21 Windows MultiPoint Server 2011 3 N Normal mode 43 P performing administrative tasks 49–50 physical connection interfaces 21 Ethernet 21 Atrus.
Index 115 VESA mount kit positioning your clients 20 viewing the status of stations 67–68 W Windows MultiPoint Server 2011 3 Windows update 53.
Index 116.
T aiwan T el: +886 3 3288837 F ax: +886 3 3288973 3F , No.361, F using 1st Rd., Gueishan T ownship, T aoyuan County 333, T aiwan China T el: +86 21 60875428 F ax: +86 21 60875427 No.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Atrust m200 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Atrust m200 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Atrust m200, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Atrust m200 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Atrust m200, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Atrust m200.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Atrust m200. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Atrust m200 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
