Manuel d'utilisation / d'entretien du produit SH-DT510 du fabricant Pioneer
Aller à la page of 38
1 Operating instructions Digital High Definition T uner SH-DT510.
2 Safety Fir st VENTILA TION CAUTION When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 8 cm at top, 5 cm at rear , and 5 cm at each side).
3 ST ANDBY/ON Button ST ANDBY : When set to the ST ANDBY position, the main power flow is cut and the unit is no longer fully operational. A minute flow of power feeds the unit to maintain operation readiness. ST ANDBY Indicator The red indicator is lit when the unit is in the standby mode.
4 T ABLE OF CONTENTS Safety First .............................................................................. 2 Chapter 1: Intr oduction ......................................................... 6 Summary of Features ...............................
5 General Setting ............................................................................... 20 TIME SETUP ...................................................................................................... 2 0 A UDIO SETUP ...................
6 Chapter 1: Intr oduction Digital High Definition T uner's Functions The SH-DT510 digital High Definition tuner opens up a ne w world of free-to- air terrestrial programming. This tuner can receive channels from VHF/UHF band TV station's digital signals.
7 System Menus All the tuner's f eatures can be accessed through the system menus. These menus can be accessed with simple point and clic k actions, using the navigation and select b uttons on the RCU. The men us include items such as T ransmission P arameter Configuration, Channel List, A udio Options, and P arental Loc k.
8 Menu T ree Note: Y ou need to enter a " P assw ord " to access some of the functionality in the menu. P ass word is initially set to "0000".
9 Chapter 2: Installation Introduction If y our ser vice provider or system installer has already set up the antenna and connected the tuner , then you can star t the operations specified in Chapter 4.
10 Functions Of RCU Buttons The b uttons on the remote control are described as follows: • ST ANDBY/ON: Switches the tuner between ON and ST ANDBY modes. • Numeric Buttons: For entering channel number or pass word. • INFO: Displays i-Plate pro viding inf or mation about the current channel.
11 Front P anel The buttons and indicators on the F ront Panel of y our SH-DT510 are described in the follo wing picture and table: Rear P anel The rear panel carries connectors for attaching VHF/UHF antenna and other home enter tainment equipment.
12 T erminals S-Video Out Data P or t RF In Composite Video Out A udio Out (L, R) RF Out A C IN Digital A udio Out (Optical and Coaxial) Component Out (Y/Pb/Pr) HDMI Out Description Connects to the S-Video input on your TV or VCR. F or ser vice use only .
13 Sample Configurations HDMI Connection High Definition TV(Y/Pb/Pr) Connection SERVICE ONL Y AUD IO O UT L R OPTICAL Y P B P R COAXIAL HDMI OUT VIDEO OUT COMPONENT VIDEO S- VIDEO VIDEO RF IN RF OUT A.
14 S-Video Connection Note: Connecting video through S-Video , OSD can not wor k under 1080i / 720p and 576p modes. Please connect your TV to Y/Pb/Pr or HDMI output f or OSD properly displaying under 1080i / 720p & 576p modes .
15 Antenna Loop Connection Using RF Output to connect with VCR or Secondary TV SERVICE ONL Y AUD IO O UT L R OPTICAL Y P B P R COAXIAL HDMI OUT VIDEO OUT COMPONENT VIDEO S- VIDEO VIDEO RF IN RF OUT AN.
16 Chapter 3: Channel Setting Introduction After finishing the hardw are installation as descr ibed in Chapter 2, s witch on the tuner . It will displa y Data base is Empty and instruct you to press the "MENU" button on the remote control. The f ollowing menu will be displa yed after pressing the "MENU" b utton.
17 INST ALLA TION • INST ALLA TION MENU gives 4 different sub-menu. QUICK SCAN A UTO SCAN MANU AL SCAN CLEAR ALL D A T A QUICK SCAN If y ou live in one of the cities or regions listed in the Q UICK SCAN menu, select your city or region and start scanning all digital TV channel signals .
18 A UT O SCAN A uto Scan searches f or digital programs on all channels , 5 to 69, through the VHF and UHF bands. • Select A UTO SCAN and pr ess "ENTER" button. • Select YES then press "ENTER" button to start channel sear ch. • The tuner starts scanning fr om channel 5 to channel 69.
19 MANU AL SCAN Manual Scan search the channel based on user request frequency and bandwidth. • On the Installation page, select MANU AL SCAN and press "ENTER" button. • Select channel number . Be sure you know the channel number and its RF frequency .
20 General Setting • Selecting SET UP will display this sub-menu. TIME SETUP A UDIO SETUP i - PLA TE SETUP SOFTW ARE TIME SETUP • TIME SETUP sets the time in "TIME ZONE". Use the " "and " " buttons to select the local time zone you ar e located in and press the "ENTER" button.
21 i - PLA TE SETUP • On selecting this option from the abo ve menu, you can change the i-PLA TE display time and f ormat..
22 SOFTW ARE • When you select the SOFTW ARE menu, there ar e two sub-menus displayed: CURRENT VERSION INST ALL NEW S/W INST ALL NEW S/W • Service use only CURRENT VERSION • Under the CURRENT VERSION sub- menu, the ID number of installed hardwar e and software versions of the tuner are display ed.
23 Chapter 4: Using the T uner Introduction Once the channels are downloaded, y ou can start enjoying the full range of video and audio progr ams. Operating the tuner is e xtremely easy . Y ou can control the show tuner directly from the F ront P anel or with the RCU as described below .
24 Selecting F av orite Channels • Under the "CH SETUP" sub-menu, you can select "SELECT F A V ORITE" to set up fa vorite channels. • Use " " and " " b uttons to select the channel, use " " and " " buttons to select "F A V .
25 P ARENT AL GUID ANCE • Under CH SETUP sub-menu, you can select P ARENT AL GUID ANCE to block pro grams. • Use " " and " " buttons to select the Rating, press "ENTER" b utton to confirm the setting .
26 i-PLA TE (INFORMA TION PLA TE) • While watching DTV you can press the "INFO" button to acti vate extended program inf ormation. • The i-PLA TE will pop up with the follo wing informat.
27 TELETEXT / Closed Caption • When the i-PLA TE indicated that T eletext / Closed Caption data is av ailable on the current channel, y ou can press the " TTX " button on the remote contr ol to display it on the TV screen. • 4 Colour buttons ar e assigned f or TTX.
28 SLEEP When the selected time elapses, the Sleep Timer automatically places the system into the standb y mode. Press "SLEEP" button to select the desired time . • The timer starts counting. • T o cancel the Sleep T imer , select "OFF" by pressing "SLEEP" b utton.
29 Appendix A: Interference with The HDTV T uner W eather Induced Signal Fading Natural calamities ma y aff ect signal reception. If the terrestrial TV programming is often aff ected by inclement w eather conditions, there are a f ew basic steps y ou can take to impro v e reception: 1.
30 Appendix B: T roub leshooting If you encounter an y problems with the tuner , look through this section f or a description of y our problem. T r y solving the prob lem by f ollowing the giv en solutions.
31 Prob lem (5) No video service. (6) Does not hav e all the channels av ailable after activ ating “ A UTO SCAN” when first time installing the recei ver . (7) Does not hav e all the channels av ailable after using “QUICK SCAN”. (8) Cannot lock signal by using “MANU AL SCAN”.
32 Appendix C: DTV CHANNEL T ABLE The f ollowing is a list of D VT channels availab le in Australia. First, into "MANU AL SETUP" Second, select the VHF channel number , then use a middle frequency to star t search.
33 City Canberra Darwin Newcastle W ollong ong Hobart Hobart NE Identifier CTC -7 ABC -9 WIN -31 CBN -34 SBS -28 SBS -28 ABD -6 NTD -8 TND -34 NBN -3 NEN -54 NRN -57 ABHN -5A/ 4B SBS -45 WIN -59 CTC -.
34 Appendix D: Specifications Standar ds Compliance Compliant Standard D VB-T , MPEG-2 RF Input/Output Frequency Australian Allocation ; VHF(104.5 ~ 226.
35 Front P anel Function Control 7 Buttons Channel Display 4 Digits / 7-segment display Remote Contr ol Buttons 35 Buttons including Standby , CH+, CH–....etc P o wer Supply Input V oltage 240V ~ 50 Hz Power Consumption 18W (3W standby) Dimension Size (W × D × H) 360 × 268 × 80 mm W eight 3.
36 Glossary * Aspect Ratio : It is the ratio of the width of the screen to the height. The two relev ant digital TV f or mats are 16:9 (widescreen) or 4:3 (the traditional screen ratio). 16:9 is more ergonomically suitable f or the human eye . * Bandwidth : Frequency range allo ws f or carrying a cer tain radio signal.
37 * Megahertz (MHz) : Millions of cycles per second, which describes frequencies of radio wa ve or electric current. * OSD : Abbreviation of "On Screen Displa y", used in digital set top box. OSD is comprised of a main menu and many submenu with lots of options of functions inside.
Published by Pioneer Corporation. Copyright © 2005 Pioneer Corporation. All rights reserved. Printed in Taiwan <IB07070099> PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90810-1540, U.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Pioneer SH-DT510 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Pioneer SH-DT510 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Pioneer SH-DT510, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Pioneer SH-DT510 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Pioneer SH-DT510, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Pioneer SH-DT510.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Pioneer SH-DT510. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Pioneer SH-DT510 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
