Manuel d'utilisation / d'entretien du produit PRV-9000 du fabricant Pioneer
Aller à la page of 150
PR V -9000 DVD Recorder Operating Instructions V ersion 1.0 November 27, 2001 Pioneer Electronic Corporation Pioneer Electronics (USA), Inc..
PRV -9000 Operating Instruction s This manual is copyrighted with all rights reserve d. No part of this document may be reprinted, produ ced, translated or utilized in any form or by any means now kno.
PRV -9000 Operating Instruction s FCC INFORMATION The equipment described i n this manual has been test ed and found to comply with the limits for a Cla ss B digital device in accorda nce with the specifi cations in Part 15 of FCC rules.
PRV -9000 Operating Instruction s T able of Contents 1 INTRODUCTION..................................................................................................................... 1 1.1 F EA TURES .................................................
PRV -9000 Operating Instruction s 4.1.1 Set the Clock......................................................................................................... 24 4.1.2 Set the TV Aspect Ratio............................................................
PRV -9000 Operating Instruction s 4.1 1 P LA YING A R ECORDING ON A DVD P LA YER ......................................................................... 54 4.12 F INALIZE A D ISC ......................................................................
PRV -9000 Operating Instruction s 7.3.3 Create a Name For a Title .................................................................................... 91 7.3.4 Create a Playlist Title ...................................................................
PRV -9000 Operating Instruction s 10.2.1 VR Format Disc................................................................................................... 117 10.2.2 Video Format Disc ...................................................................
PRV -9000 Operating Instructions 1 I NTRODUCTION The Pioneer PRV -9000 Pro DVD-V ideo Recorder is a stand-alone set- top unit that can make DVD-Video discs with the press of a single button an d creates the disc in real tim e .
PRV -90 00 Operating Instructions 1.1.2 Recording The following points su mmarize the recording functions. Program up to 8 Timed Recordings Program the PRV -9000 to record up to eight events, up to a month in advance, using the VCR+Plus system. In addition to recording single programs, you can specify daily or weekly recordings too.
PRV -90 00 Operating Instructions 1.1.4 Editing The following points su mmarize the editing functions. Safe, Non-Destructive Editing (VR mode) When editing a DVD-RW disc, the original content on the disc is lef t untouched. The edited version (Playlist content) points to your selected areas on the original disc content.
PRV -90 00 Operating Instructions 1.2.1 Inserting Batteries in the Remote Control Follow the directions to insert the provided batteries in to the remote control. 1. Open the battery compartment on the back of the remote control. 2. Insert two AA/R6P batteries in to the compartment following the positive/negative indicators within the chamber.
PRV -90 00 Operating Instructions 1.3 Media Comp atibilit y Differences between DVD-R and DVD-R W discs is that DVD-R is a record-once medium for Video formatting only while DVD-R W is an erasable/re-recordable medium for both the Video and VR format s.
PRV -90 00 Operating Instructions Note: When a disc is created in a com patible format, the settings on the re cording application may still cause playba ck failures.
PRV -90 00 Operating Instructions 1.3.4 DVD Disc Box Information The following information can be found on the side of DVD media. If the information is missing, contact the manufacturer of the disc (Fig 1-4).
PRV -90 00 Operating Instructions more angles. Discs with multiple angles support switching between views during playback. 1.3.5 DVD Region Codes All DVD Video discs carr y region mark on the case indicating the region(s) of the world where the disc may be played.
PRV -90 00 Operating Instructions 1.4.2 Video Mode When selecting the V ideo mode, refer to these guidelines. T wo picture quality/recording time settings Compatible with many DVD devices when the disc is finalized Limited editing ability 1.
PRV -90 00 Operating Instructions 2 C ONNECTION O PTIONS Become familiar the rear panel of the PR V -9000 before connecting other components. 1 - AC IN (power in let) 2 - Component Video Out (BNC port.
PRV -90 00 Operating Instructions 2.1 Basic Connections The PRV -9000 is shipped with cables for inst alling the unit in your home however existing or additional cables may be required for full operatio n. For other equipment connections, refer to the section entitled Alternative Connections later in this chapter .
PRV -90 00 Operating Instructions 2.1.2 Connect to a TV for Disc Playback Connect the PR V -9000 to your TV or monitor to watch DVD discs. Using the following setup allows sound to play through the television sp eakers. 1. Connect Video Output 1 to the TV’s Video In jack using the provided video cable.
PRV -90 00 Operating Instructions 2.2.1 Connect Through S-Video Output S-Video carr ies an image as separat e color and luminance (brightness) signals. These signa ls are transmitted through a single cable from the S- Video Output port to the S-V ideo Input connection on the display device (Figure 2-4).
PRV -90 00 Operating Instructions 2.2.3 Connect to an AV Receiver T o enjoy multi-channel surround sound, connect an A V amplifier/receiver using either digit al optical output or coaxial output . It is unnecessary to use both outputs simult aneously to achieve surround sound.
PRV -90 00 Operating Instructions Connect through the Coaxial Digit al Output For a coaxial connection, use a coaxial cable, similar to a video cable (n ot provided). It is unnecessary to use both optical and coaxial output s simultaneously to achieve surround sound.
PRV -90 00 Operating Instructions 2.2.4 Connect to Other A/V Sources – Satellite/Cable The PRV -9000 supports several A V products including VCRs, satellite tuners and camcorders. Connect to a VCR / Satellite Receiver: 1. Connect the VCR’s (or receiver) Video Output to the V ideo Input .
PRV -90 00 Operating Instructions Alternate Method to Connect Cable or Satellite: If the cable box or satellite receiver provides six or more scrambled channels, refer to the following diagram for assist ance. 1. Connect RF cables as shown with the antenna/cable line connected to the cable box/satellite tuner .
PRV -90 00 Operating Instructions 2.3.1 Connecting a VCR or an Analog Camcorder 1. Connect the VCR/camcorder ’s V ideo Output to a front Video Input. Video Input 3 with a S-Video or RCA-pin video cable (not provided) * Video Input 1 with a S-Video cable Video Input 2 (rear panel) with a BNC video cable (not prov ided) 2.
PRV -90 00 Operating Instructions The following messages may appear on-screen when using the DV IN/OUT port on the recorder ’s front p anel: DV camcorder not connected Check the cable connection from the camcorder to the jack. Reseat the cable if necessary .
PRV -90 00 Operating Instructions 3 C ONTROLS ( REMOTE & PAN EL ) AND D ISPLAYS Become familiar the front panel of t he PRV -9000. 1 - STANDBY/ON 2 - FL DIMMER button Press to change the display b.
PRV -90 00 Operating Instructions The PRV -9000 display provides settings information. 1 - Play/Record indicator - Outer (white) ring denotes the pla yback spe ed and direction - Inner (red) ring denotes elapsed playback/recording tim e Note: When loading a VR m ode disc, the RW indicator in the center light s up.
PRV -90 00 Operating Instructions Review the functions of the remote control included with the Pioneer PRV -9000. Additional information regarding the remote control is available throughout this section of the manual.
PRV -90 00 Operating Instructions Using the On-Screen Displays: Most settings and functions are available through on-screen menus and graphic links. Scroll to or make a selection then press ENTER to activate that feature. Information about a highlighted option displays at the bottom of the screen.
PRV -90 00 Operating Instructions 4 G ETTING S TARTED Before plugging in the PR V -9000 for the first time, verify t hat all cables are properly and firmly connected. Once all equipment is linked, following the step s below for st andard operation. Powering ON the system: 1.
PRV -90 00 Operating Instructions 2. Select Initial Setup from the menu. Use the joystick to highlight the option then press ENTER . 3. Confirm that Basic from the Initial Setup menu is highlighted. Menu options appear to the right of the highlighted menu selection.
PRV -90 00 Operating Instructions 12. Confirm that the clock displays the correct time and date. Note: If the clock is incorrect, check the clock settings unde r step 5 above. Manually Set Clock: T o manually set the clock, follow the step s below . 1.
PRV -90 00 Operating Instructions primary screen action T o play DVD-V ideo discs on a standard television , follow the directions below . 1. Press SETUP to access the menu. 2. Highlight Initial Setup from the main menu. Use the joystick to highlight the option.
PRV -90 00 Operating Instructions 1. Press SETUP to access the menu. 2. Highlight Initial Setup from the main menu. Use the joystick to highlight the option. 3. Press ENTER to confirm your selection. 4. Highlight Audio Out from the Initial Setup menu by using the joystick.
PRV -90 00 Operating Instructions 18. Press STANDBY/ON to change the recorder to the standby mode. 19. Press STANDBY/ON again to power the recorder ON. 4.1.4 Auto-Tune the Channels The PRV -9000 has a built-in TV tuner for recording programs off the air .
PRV -90 00 Operating Instructions Note: to fine-tune individual stations/channels, use the Manu al CH Setting feature discussed in the following section of this manual. 4.1.5 Set Channels Manually & Channel Skipping The PRV -9000 has a built-in TV tuner for recording programs of f the air .
PRV -90 00 Operating Instructions 4.1.6 Assign Guide Channels for VCR Plus+ The VCR Plus+ system uses guide channels to assign st ation channels with specific VCR Plus+ codes. 1. Press SETUP to access the menu. 2. Highlight Initial Setup from the main menu by using the joystick.
PRV -90 00 Operating Instructions 4.1.7 Set the Remote to Control a TV Before using the remote control supplied with the PR V -9000 to directly control a television, you must set the maker code. Follow the directions below to program the maker code in to the remote control.
PRV -90 00 Operating Instructions 2. Press the TV button to check the remote’s compatibility/functionality. If the code is correct, the television powers ON.
PRV -90 00 Operating Instructions Follow the directions below to restore default settings. 1. Power ON the recorder. 2. Remove any discs left in the tray. 3. Close the tray. 4. Hold down the STOP button on the recorder’s front panel. 5. Press the STANDBY/ON button (front panel).
PRV -90 00 Operating Instructions When the Audio button is pressed, the current audio channel appears on the display . Pressing Audio again changes the audio playback channel to another setting.
PRV -90 00 Operating Instructions 4.3 Playing Discs This section explains controlling and playing the following types of discs: DVD (all types) Video CD Audio CD Note: Throughout this m anual, the generic term DVD refers to playback-only DVD-Vide o and DVD- R/RW di scs.
PRV -90 00 Operating Instructions 4.3.1 Video (Mode) Playback Control The chart below reflects control options when playing back a DVD-V ideo disc or a DVD-R/RW disc in V ideo mode. Button Function S tart s playback If the display shows RESUME, playback start s from the previous stopped location.
PRV -90 00 Operating Instructions 4.3.3 CD and Video-CD Playback Control The chart below reflects control options when playing back a CD disc. Button Function S tart s playback (Video-CD only) If the display shows RESUME, playback start s from the previous stopped location.
PRV -90 00 Operating Instructions T o change title, chapter , or track from the front panel, follow the steps b elow . 1. Press the FUNCTION button on the front panel repeatedly until the appropriate selection appears. TITLE? (DVD) CHAPTER? (DVD) TRACK? (CD/Video CD) 2.
PRV -90 00 Operating Instructions An alternate method of navigating a DVD-R/R W disc recorded in VR mode is to use the disc navigator (DISCNA VI ) button discussed later in this manual. DVD-R/RW discs record ed in Video mode can be navigated using the T itle List menu discussed later in this manual.
PRV -90 00 Operating Instructions Button Function RETURN Displays the PBC menu Numbers Selects a numbered menu option when available Displays the previous menu page if applicable Displays the next menu page if applicable 4.5 Scanning Discs During playback, use the Jog dial on the remote control to fast-scan forward or backward on a disc.
PRV -90 00 Operating Instructions 4.6 Slow-Motion Playback After p ausing playback of a DVD or V ideo-CD disc, use the Jog dial to control the direction and speed of slow-motion playback. The direction and speed is shown on the display . The picture quality is reduced during slow motion viewing.
PRV -90 00 Operating Instructions From the Front Panel: T o use the buttons on the front of the recorder , follow the directions below . 1. Begin playback of a disc. 2. Press the FUNCTION button until STEP? appears on the display. 3. Turn the Jog dial to start slow-motion playback.
PRV -90 00 Operating Instructions From the Front Panel: T o use the buttons on the front of the recorder , follow the directions below . 1. Begin playing a disc. 2. Press the FUNCTION button until the STEP? appears on the display. 3. Turn the SMART JOG dial to advance or back up one frame at a time.
PRV -90 00 Operating Instructions Changing the format erases existing disc content. Within the recording modes (fixed for the entire disc), are record settings for determining picture quality and duration preferences. These settings are alterable for each recording session as long as the mode remains the same.
PRV -90 00 Operating Instructions The table below list s maximum recording times for each MN level. Level Recording T ime Level Recording Ti me 1 360 minutes (longest time) 17 160 min utes 2 345 minut.
PRV -90 00 Operating Instructions V1 – maximum recording time of 60 minutes per disc similar quality to Level 32 in the VR mode V2 – maximum recording time of 120 minutes per disc similar recordin.
PRV -90 00 Operating Instructions together as a single audio channel. During playback, the user is able to switch between the main audio and SAP audio. 4.8.4 Video Recording Restrictions The following information provides video recording limitation s that coincide with the DVD Forum specifications and other source providers’ guidelines.
PRV -90 00 Operating Instructions 4.9 Initializing a Disc When recording to a DVD-R disc, set the mode to V ideo. For DVD-R W discs, the default is VR mode but can be switched to Vide o mode. Change the mode from the Disc Setup menu. Note: Changing the mode on a DV D-RW disc erases all existing m aterial from the disc.
PRV -90 00 Operating Instructions 4.10.1 Initialize for VR Mode Recording When recording in VR mode (DVD-R W discs only), select either SP (standard) or MN (manual) setting.
PRV -90 00 Operating Instructions 4.10.2 Initialize for Video Mode Recording When recording in V ideo mode (DVD-R or DVD-R W discs), select either V1 (high quality) or V2 (st andard) setting. The V2 setting provides approximately twice as much recording time.
PRV -90 00 Operating Instructions 4.10.3 Setting the Recording M ode from the Front Panel Instructions in this manual are primarily for controlling the re corder through the remote control. However , the steps below provide directions for using the front panel to set the recording mode on the PR V -9000.
PRV -90 00 Operating Instructions 3. Load a recordable disc on to the tray. Unformatted discs require up to one minute to initialize . 4. Set the recording mode (if necessary). Refer to the previous sections 4.10.1 Initialize for VR Mode Recording and 4.
PRV -90 00 Operating Instructions 4.10.6 One Touch Recording The following method is the simplest way to record in 30-minute segments. 1. Load a recordable disc in to the unit. Unformatted discs require up to one minute to initialize. 2. Select the appropriate settings according to the instructions in the previous section.
PRV -90 00 Operating Instructions 4.12 Finalize a Disc Finalizing a disc seals the recording against add ing additional segment s or from editing the existing material. Of ten, DVD devices require a disc to be finalized or fixed before playing back the recorded sequences.
PRV -90 00 Operating Instructions 2. Press DISPLAY to reveal the primary disc data. 3. Continue pressing DISPLAY to cycle through the disc data. Refer to the following pages for data details. 4. Hide the information by pressing DISPLAY repeatedly until reaching the end of the on-screen data loop.
PRV -90 00 Operating Instructions Example of VR mode on DVD-RW media: On-screen dat a while playing a disc: On-screen dat a while a disc is stopped: * 2 – T he ’!’ mark denotes that the contents are scrambled with CPRM se curity technol ogy .
PRV -90 00 Operating Instructions Example of Video-CD media: On-screen dat a while playing a disc: On-screen dat a while a disc is stopped: Example of Recording to DVD-R or DVD-RW media: Note: The on-screen data automatically d isappears after 150 minutes.
PRV -90 00 Operating Instructions Additional information may appear on-screen under the following conditions: Within the Reco rdin g or S topped dat a screen, a One Time Rec or Can’t Record message may appear . These messages occur when the TV program is copy-controlled or cont ains copy-controlled information.
PRV -90 00 Operating Instructions 5.0 O THER P LAYBACK F EATURES In addition to the features detailed in the first chapter within this manual, the PR V -9000 provides advanced features for pro-sumer and professional users. This chapter reviews functions and abilities beyond st andard operation.
PRV -90 00 Operating Instructions 3. Enter the title/chapter/track number or the time (H, MM, SS). Numbers enter from the right to the lef t thus the first number entered appears on the far right (SS ) then is forced towards the lef t (H) field with each number added.
PRV -90 00 Operating Instructions 5.4 Change Playback Options Playback options provide a way to watch video with altered views or sound tracks. The options include subtitles, audio soundtracks, audio channels and vie wing angles. This section ad dresses each option separ ately .
PRV -90 00 Operating Instructions with two or more soundtracks, the recorder supp orts switchin g between soundtracks during playback. Note: Some material only allows switchi ng soundt racks from t he disc m enu. Press MENU on the remote control to check fo r soundtrack options.
PRV -90 00 Operating Instructions 5.4.4 Set to Repeat Playback A PRV -9000 can play back all or portions of a disc as well as loop material. The repeat options are as follows: Repeat one or more c.
PRV -90 00 Operating Instructions 3. Press PLAY at the end of the sequence to jump back to the beginning of the section for loop playback. The recorder repeats the segment but continues beyond the end of the looped sequence. 5.5 Create a Program (Play) List Build a Program List to play tracks, chapters or titles in a pre-programmed series.
PRV -90 00 Operating Instructions The directions below provide step-by-step instructions to cre ate a Program List for a DVD-R or DVD-RW disc. 1. Load a disc in to the recorder. The disc may be playing, paused or stopped. If t he disc is playing, the picture appears in the lower right corner of the screen.
PRV -90 00 Operating Instructions T o view the Program List, press SHIFT then PROGRAM on the remote control. T o add a pause between List entries, press the PA U S E button instead of a number button then press ENTER to add the pause. If there is already a number in that space, all entries af ter that point are forced down one step in the List.
PRV -90 00 Operating Instructions 1. Place a disc in the recorder. The disc may be playing, paused or stopped. If t he disc is playing, the picture appears in the lower right corner of the screen. 2. Press SHIFT on the remote control. 3. Press PROGRAM (7 on the number pad).
PRV -90 00 Operating Instructions List is present, then the recorder creates a new list with the current sequ ence as the first entry . T o delete a stored Program List for a CD, access the program menu (press SHIFT then PROGRAM ) and change the Program Memory option to OFF .
PRV -90 00 Operating Instructions 6.0 R ECORDING F UNCTIONS & O PTIONS The Pioneer PRV -9000 Pro DVD-Video Recorder is a stand-alone set- top unit that can make DVD-Video discs with the press of a single button an d creates the disc in real tim e .
PRV -90 00 Operating Instructions Approximately two minutes before a timer program begins, the recorder ’s power automatically switches ON. Pressing S tandby/ON at this point stops the recording session.
PRV -90 00 Operating Instructions 9. Choose the channel (CH) to be recorded. Channel 2 through 69 Channel 1 through 125 for antenna reception channels Channel 1 through 125 for cable reception channels From an external output 10. Set the recording mode.
PRV -90 00 Operating Instructions Because the T imer is stored on the disc, the recording program activates automatically every time the disc is loaded in to the recorder . Follow the directions below to prep are a disc for storing a timer recording program.
PRV -90 00 Operating Instructions 7. Begin entering information for the timer recording(s). Move the joystick left/r ight to move the cursor lef t/right. Move the joystick up/down to scroll through options within that line. Press ENTER to retain the program information.
PRV -90 00 Operating Instructions Use a Disc With a Disc T imer Program: 1. Load the disc with a disc timer program in to the unit. RESERVED appears in the display panel while the Disc Tim er Rec option automatically switches to ON. 2. Switch the recorder to Standby.
PRV -90 00 Operating Instructions 6. Press ENTER to calculate the disc space needed for the timer recordings already present. 7. Verify that Rec OK appears next to each timer recording entry. If the timer program is too long for the disc then Tim e Over appears next to the entry.
PRV -90 00 Operating Instructions 6.1.4 Edit Timer Recording Settings Refer to the following guidelines when editing a T imer program: Previous timer recording program(s) may not be in progress .
PRV -90 00 Operating Instructions 6.1.6 Stop a Timer Recording in Progress T o stop a timer program already in progress, follow the instructions below . 1. Press and hold the REC button for approximately three seconds. When the indicator turns off, the program is cancelled but re cording continues.
PRV -90 00 Operating Instructions 6.2 VCR Plus + Programming System The VCR Plus+ system allows you to use special codes included in most television channel guides to record particular broadcasts.
PRV -90 00 Operating Instructions The directions below include images of the on-screen displays for a S tandard recording however the instructions apply to both S tandard and Disc timer recording. 1. Load a recordable disc in to the recorder. If loading an unformatted DVD-RW disc, it is automatically fo rmatted as a VR disc.
PRV -90 00 Operating Instructions T o confirm that all timer entries will fit on the loaded disc, follow the step s below . 1. Use the joystick to highlight Confirm on the Timer Program screen. 2. Press ENTER to calculate the disc space needed for the recordings.
PRV -90 00 Operating Instructions 3. Press ENTER to register the code. The display shows the timer settings: Date > Start Time > End Time > Recording Mode/Channel If CODE ERROR appears on the display , check the PlusCode and return to step 1 above.
PRV -90 00 Operating Instructions The recorder allows one camcorder interaction at a time. Controlling the recorder with equipment connected through the DV IN/OUT port is unavailable. Controlling a second PR V -9000 connected to this port is also not an option.
PRV -90 00 Operating Instructions 5. Begin recording. When recording from DV In/Out, the recorder autom atically pauses recording if the signal is m issing or interrupted. For example, the recorder pauses during blank sections of a digit al camcorder tape.
PRV -90 00 Operating Instructions 5. Press DISCNAVI (VR format discs) or TOP MENU (Video format discs). The DISCNAVI or Title List screen appears. 6. Press PLAYLIST to toggle between Original and Playlist . Set to Original for VR formatted discs. 7. Select DV Record from the menu.
PRV -90 00 Operating Instructions seconds behind the actual time so adjust the timer program for this slipp age. When the signal ceases, the recorder stop s recording. Follow the directions below to record from a satellite tuner or other device. 1. Set the timer on the satellite tuner.
PRV -90 00 Operating Instructions 4. Start recording on the camcorder. Refer to the manufacturer’s operating instructions for assistance. 5. Press PLAY to begin disc playback. 6. Press STOP to halt disc playback. 7. Stop the camcorder. 6.4 Recorder Lock-Out The command lock-out feature is operated from the front panel only .
PRV -90 00 Operating Instructions 7.0 E DITING F UNCTIONS & O PTIONS The PRV -9000 provides editing options for the original content or for content copied (Playlist) to a VR formatted DVD-RW disc. The following sections provide instructions and general editing feature information.
PRV -90 00 Operating Instructions 7.2 Add Chapter Marks The PRV -9000 supports up to 999 chapter markers per disc f or original or Playlist content. Chapter marks, used primarily for search functions, can be placed anywhere within original or Playlist content during recording or playback sessions.
PRV -90 00 Operating Instructions 3. Choose Chapter to switch to the chapter view. Use the joystick to highlight Chapter then press ENTER to open the submenu. If necessary, press the RETURN button to access the DISNAVI menu on the left side of the screen.
PRV -90 00 Operating Instructions 7.3.3 Create a Name For a Title Names (title labels) may be up to 64 characters consisting of letters, numbers and a limited series of symbols. T itle names may be associated with the original source or to a Playlist.
PRV -90 00 Operating Instructions added to the original material af ter the Playlist is created. Playlist s support up to 99 titles. Follow the direction below to add a title to the Play list. 1. Press the DISCNAVI button to access the menu. 2. Press PLAYLIST to change to the Playlist menu if necessary.
PRV -90 00 Operating Instructions 7.3.6 Move a Title/Chapter The PRV -9000 supports moving chapters and titles within a Playlist. Follow the steps below to move a title or to move a chapter within a title. Move a Title: 1. Press the DISCNAVI button to access the menu.
PRV -90 00 Operating Instructions 7.3.7 Combine Two Chapters In To a Single Chapter The Combine function merges two adjacent chapters (Playlist or Original) in to a single chapter . The two chapters must be in the same title. Chapters created from erasing a segment or p art between them cannot use this function.
PRV -90 00 Operating Instructions Erase a Chapter: 1. Press the DISCNAVI button to access the menu. 2. Press Playlist to change to the Playlist menu if necessary. 3. Use the joystick to switch to Chapter view. 4. Press ENTER to confirm Chapter view. 5.
PRV -90 00 Operating Instructions 7.3.10 Erase a Part of a Title Deleting a part of the Playlist erases nothing from the original material. However , any portion of material deleted from the original source is lost from both the original disc and the Playlist.
PRV -90 00 Operating Instructions 1. Press DISCNAVI to access the menu. 2. Press Playlist to change to the Playlist menu if necessary. 3. Select Erase All from the menu.
PRV -90 00 Operating Instructions The following limitations apply to the PRV -9000’s Undo command. Undo is unavailable for recordings If the disc is ejected, Undo is unavailable If the r.
PRV -90 00 Operating Instructions 8.0 T ITLE L IST M ENU When working in Video format (DVD-R or DVD-R W media), use the T itle List menu to play , name, and erase titles or to capture material from a camcorder connected to the front panel DVD IN/OUT port.
PRV -90 00 Operating Instructions 2. Use the joystick to highlight a title. 3. Press ENTER to play the highlighted title. 8.3 Name a T itle from the Title List Menu T o name a title in this menu, follow the directions below . 1. Press STOP if a disc is playing.
PRV -90 00 Operating Instructions 8.4 Erase a T itle from the Title List Menu Before a disc is finalized, titles recorded on the d isc may be erased. Follow the directions below to erase a title from a recorded disc. 1. Press STOP if a disc is playing.
PRV -90 00 Operating Instructions 9.0 I NITIAL S ETUP M ENU Use the Initial Setup menu to set various recorder options for sound, picture, language and other features. Some settings may only be changed when the recorder is stopped while other options are unaffected by recor der activity .
PRV -90 00 Operating Instructions Audio In – External Audio, Dual Mono Recording, DV Input, T uner Level Audio Output – Digital, Dolby Digit al, DTS, 96kHz PCM, MPEG Language – OSD, Audio, Subtitles, Auto-Language, DVD Menu, Other 9.
PRV -90 00 Operating Instructions the display device determines how the material is presented. For your display device’s options, refer to the operating insturctions.
PRV -90 00 Operating Instructions default setting (Interface). Compatibility with progressive-scan devices: Not all high-definitio n display devices supp ort progressive-scan through this recorder.
PRV -90 00 Operating Instructions When recording a dual-mono signal in V ideo or VR level MN32 (does not apply if recording through the DV input) mode from an external source, record either the L (left) or R (right) audio channel.
PRV -90 00 Operating Instructions For detailed information on Dolby Digit al output, please refer to Chapter 4: GETTING ST ARTED, section 4.1.3 Setting the Digit al Audio Output . DTS Out: There are four points to keep in min d when using DTS Out. Noise is output when playing a DTS disc with a non-DTS-comp atible amplifier .
PRV -90 00 Operating Instructions 9.1.7 Language Settings Language provides settings for the following options: OSD – default: English Subtitle – default: English Auto – default: ON .
PRV -90 00 Operating Instructions For languages other than English (default) or French, sele ct Other . The Other setting is described later in this chapter . Auto Language: When set to ON (default), Auto Language plays the default language for the DVD disc.
PRV -90 00 Operating Instructions Subtitle Off: Although the Subtitle Display setting is switched to OFF , some discs still show the subtitles. If the subtitles display , choose from the following options to work with the situation.
PRV -90 00 Operating Instructions Chapter Interval – default: 3 minutes Remote Control Set – default: Recorder1 9.2.1 Content Lock (a.k.a. Parental Lock) Some DVD Video discs provide a content or p arental lock for mature viewing material.
PRV -90 00 Operating Instructions If you forget the password, reset the recorder . Resetting the recorder erases the current password and leaves th e entry blank. Refer to Chapter 4: GETTING ST ARTED, section 4.1.9 Return to Default Settin gs . Change a Password: T o change the password, refer to the instructions below .
PRV -90 00 Operating Instructions 9.2.5 Navi Mark Within DISCNA VI, a thumbnail image of the content represent s each title. The default (0 seconds) setting captures the first recorded frame to create the thumbnail. The st andard capture point can be changed to a frame at 30 seconds or a frame at three minutes.
PRV -90 00 Operating Instructions The PRV -9000 has three recorder IDs available, Recorder1, Recorder2 and Recorder 3. When set to Recorder2 or Recorder3, the remote control mode appears on the front panel. Note: Setting the ID on the recorder locks out the remote control un til the remote’s ID is changed to match the recorder.
PRV -90 00 Operating Instructions 10 D ISC S ETUP M ENU Use the Disc Setup menu to set various disc options for disc format, disc lock and timer recording programs. Some settings may only be changed when the disc is stopped. Settings that require a stopped disc are shown with an outline in the Initial Setup menu.
PRV -90 00 Operating Instructions 10.1.1 Disc Timer Recording Function T o enable disc timer recording on the loaded disc, set this function to ON. For detailed information on using this fea ture, refer to Chapter 6, RECORDING FUNCTIONS & OPTIONS, section 6.
PRV -90 00 Operating Instructions 10.1.3 Protect Disc The Protect Disc function prevent s a disc from accident al erasing, editing or writing over an existing recording. T o unlock a disc for edits, set to OFF . A protected disc may STILL be initialized which erases any existing content from the disc.
PRV -90 00 Operating Instructions 4. Use the joystick to highlight Initialize . 5. Select the Video Disc sub-menu. 6. Choose Start from the Video sub-menu. 7. Press ENTER to begin formatting the DVD-RW disc. Formatting the disc erases any existing content.
PRV -90 00 Operating Instructions 1. Press the SETUP button to access the main menu. 2. Use the joystick to highlight Disc Setup . 3. Press ENTER to access the menu. 4. Use the joystick to highlight Finalize . 5. Select Undo Finalize on the sub-menu. 6.
PRV -90 00 Operating Instructions 2. Press SETUP to access the menu. 3. Use the joystick to highlight Video Adjust on the Setup menu. 4. Press ENTER to confirm your selection. 5. Press ENTER to select the first option, Picture Creation . 6. Use the joystick to scroll left and right to change the preset op tion.
PRV -90 00 Operating Instructions White Level – adjusts intensity of wh ite Black Level – adjusts intensity of b lack Hue – adjusts overall balance betwe en red and green Chroma Level – adjust how rich colors appear 9. Move the joystick left/right to adjust the current picture quality.
PRV -90 00 Operating Instructions 13. Press ENTER to return to the settings screen after viewing. 14. Press SETUP to exit the menu. 10.4.4 Set Picture Quality for Disc Playback This settings determines how the picture appears when play ing from a disc.
PRV -90 00 Operating Instructions Professional – suitable for professional monitors Mem ory1 – user preset 1 Mem ory2 – user preset 2 Mem ory3 – user preset 3 5. Use the joystick to highlight Detailed Settings . 6. Select the picture quality setting to be adjusted.
PRV -90 00 Operating Instructions 11 A DDITIONAL I NFORMATION This section provides the following general information. • Installation and moving hints • On-screen messages • Language Code list • Disc handling guidelines • Disc formats • Screen sizes • General Maintenance Issues • General specifications • Brief glossary 1 1.
PRV -90 00 Operating Instructions Never lift or move the unit during recording or playback. Discs rot ate at a high speed and may be damaged or damage the optics within the chassis. 1 1.2 On-Screen Messages The following chart provides message which may appear on-screen.
PRV -90 00 Operating Instructions Message Explanation / Action Either of the following: No DV input. Cannot preview because there is no DV input. The DV IN/OUT port fails to detect a signal. This may appear when a blank section of tape is playing from the connected camcorder .
PRV -90 00 Operating Instructions Language Code Language Code Language Code Dutch (nl) 1412 Interlingua (ie) 0905 Sindhi (sd) 1904 Russian (ru ) 1821 Inupiak (ik) 091 1 Sangho (sg) 1907 Chinese (zh) 2.
PRV -90 00 Operating Instructions 1 1.4 Disc-Handling Guidelines When holding discs of any type, avoid l eaving fingerprint s , smears or scratches on the recording surface. Hold the disc by the edges or supported from the center hold. Avoid scrat ching the labeling side of the d isc as well as the recording side.
PRV -90 00 Operating Instructions Disc (screen) format Setting Appearance 16:9 (Wide) Appears squished so set to either 4:3 viewing setting (Letterbox or Pan & Scan) 4:3 4:3 (Letterbox) 4:3 (Pan &.
PRV -90 00 Operating Instructions 11.6.2 Clearing Condensation Condensation may form inside the unit if it is brought from a cool environ ment in to a warm room, or if the temperature rises suddenly in the room. Condensation may temporarily impair recorder perfo rmance.
PRV -90 00 Operating Instructions Aspect Ratio The width of a television screen relat ive to it s height. Conventional TVs are 4:3 (screen being close to square) while wide-screen models are 16:9 (scre en close to twice as wide as the height) Chapter A title on a DVD is divided in to smaller segments called chapters.
PRV -90 00 Operating Instructions PBC is a system to navigate a Video CD through on-screen menus recorded onto the disc. An example of a disc using this technology is a karaoke disc where the disc is not normally played from beginning to end.
PRV -90 00 Operating Instructions 12 T ROUBLESHOOTING The following sections deal with common errors and specific problems when working with advanced recording devices such as the PR V -9000 DVD recorder .
PRV -90 00 Operating Instructions (transition requires approximately 30 seconds) Programs set to start recording at the same time causes the recorder to give priority to the program entered first .
PRV -90 00 Operating Instructions Cannot operate the DV camera The recorder fails to control the camcorder , turning the camera OFF then ON again may solve the problem. Could not operate the DV camera The recorder fails to control the camcorder beca use this feature is unsupported.
PRV -90 00 Operating Instructions 3. Why does the disc automatically eject after closing the disc tray? Confirm that the disc is aligned in the tray properly with the label facing up. Remove the disc and clean the recording/recorded surface. V e rify that the region code is comp atible with the PR V -9000 recorder .
PRV -90 00 Operating Instructions Replace the battery in the remote control. When the battery runs down, the ID number automatically resets to ID1. 10. Why is the sound distorted/missing? Adjust the volume control for the television, monitor or A V device.
PRV -90 00 Operating Instructions 14. Why is the picture so dark and/or distorted during playback? When a copy-protected disc is played on the recorder but connected to the television/monitor via a VCR, the picture fails to display correctly . Connect the recorder directly to the viewing device.
PRV -90 00 Operating Instructions T ry switching the DV Link option to OFF . For assistance, refer to Chapter 9: INITIAL SETUP MENU, section 9.1.4 V ideo In/Out Settings . T ry toggling the DV Input. For assistance, refer to Chapter 9: INITIAL SETUP MENU, section 9.
PRV -90 00 Operating Instructions For additional information or assistance please cont act the Support group at Pionee r Electronics (USA), Inc. Email: dvdv@pnmt.
PRV -90 00 Operating Instructions (this page intentionally le ft blank) 141.
PR V -9000 DVD Recorder Pioneer Electronics (USA), Inc. 2265 East 220 th S treet Long Beach, California 90810 United S tates of America (310) 952-21 1 1 http://www .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Pioneer PRV-9000 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Pioneer PRV-9000 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Pioneer PRV-9000, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Pioneer PRV-9000 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Pioneer PRV-9000, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Pioneer PRV-9000.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Pioneer PRV-9000. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Pioneer PRV-9000 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
