Manuel d'utilisation / d'entretien du produit A02-RA243-W54M_ME01 du fabricant Atlantis Land
Aller à la page of 88
Where solutions begin WebShare 243WM Wireless MIMO ADSL2+ Router A02-RA243-W54M USER’S MANUAL A02-RA243-W54M_ME01 Company certified ISO 9001:2000.
.
WEBSHARE 243WM Copyright The Atlantis Land logo is a registered tradem ark of Atlantis Land SpA. All other names mentioned mat be trademarks or r egistered trademarks of their respective owners. Subject to change without notice. No liability for technical errors and/or omissions.
WEBSHARE 243WM TABLE OF CONTENTS CHAPTER 1 ............................................. 1 1.1 A N O VERVIEW OF T HE W EB S HARE 243WM ................................................................................ 1 1.2 P ACKAGE C ONT ENTS .........
WEBSHARE 243WM 3.6.3.3.2 Remote Access ................................................................................................... 39 3.6.3.3.3 Firmware ..........................................................................................
.
WEBSHARE 243WM 1 Chapter 1 Introduction 1.1 An Overview of the WebShare 243WM Broadband Sharing and IP sharing The Wireless MIMO ADSL2+ Router supports 4 x 10/100 Mbps auto-negotiating Fast Ethernet ports for connection to your PC or LAN and downstream ( with built-in ADSL2+ modem) rate up to 24Mbps.
WEBSHARE 243WM 2 1.2 Package Contents • WebShare 243WM Wireless ADSL2+ Router • Vera (Multilanguage Interactive Tutorial) • One CD-Rom containing the online manual • One Quick Start Guide • .
WEBSHARE 243WM 3 • Network Address Translation (NAT): Allows multi-users to access outside resource such as Internet simultaneously with one IP address/one Internet access account. Besides, many application layer gateway (ALG) are supported such as web browser, ICQ, FTP, Telnet, E-mail, News, Ne t2phone, Ping, NetMeeting and others.
WEBSHARE 243WM 4 • Virtual Server: Users can specify some services to be visible from outside users. The router can detect incoming service request and forward it to t he specific local computer to handle it. For ex ample, users can assign a PC in a LAN acting as a WEB server inside and expose it to the outside network.
WEBSHARE 243WM 5 1.4 WebShare 243WM Wireless Application.
WEBSHARE 243WM 6 Chapter 2 Using WebShare 243WM Wireless 2.1 Cautions for using the WebShare 243WM Wireless Do not place the WebShare 243WM Wire less under high humidity and high temperature. Do not use the same power source for WebShare 243WM Wireless with other equipment.
WEBSHARE 243WM 7 LAN Lights when connected to Ethernet device: • Green for 100Mbps; Orange for 10Mbps • Blinking when data transmit/received. ADSL Lights when successfully connected to an ADSL DSLAM. PPP Steady glow when there is a PPPoA / PPPoE connection.
WEBSHARE 243WM 8 them and the wall socket (unless you are using a C entral Splitter or Central Filter installed by a qualified and licensed electrician) , and ensure that all line filter s are correctly installed and the right way around.
WEBSHARE 243WM 9.
WEBSHARE 243WM 10.
WEBSHARE 243WM 11 Chapter 3 Configuration The WebShare 243WM Wireless can be confi gured with your Web browser. The web browser is included as a standard application in the following operation systems, UNIX, Linux, Mac OS, Windows 95/98/NT/2000/Me , and etc.
WEBSHARE 243WM 12 3.3 Configuring PC in Windows For Windows 95/98/ME 1. Go to Start / Settings / Control Panel . In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP / IP -> NE2000 Compatible , or the name of any Ne twork Interface Card (NIC) in your PC.
WEBSHARE 243WM 13 5. Then select the DNS Configuration tab. 6. Select the Disable DNS radio button and click “OK” to finish the configuration..
WEBSHARE 243WM 14 For Windows NT4.0 1. Go to Start / Settings / Control Panel . In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties . 3. Select the Obtain an IP address from a DHCP server radio button and click “OK” .
WEBSHARE 243WM 15 For Windows 2000 1. Go to Start / Settings / Control Panel . In the Control Panel, double-click on Network and Dial-up Connections . 2. Double-click LAN Area Connection . 3. In the LAN Area Connection Status window, click Properties .
WEBSHARE 243WM 16 4. Select Internet Protocol (TCP/IP) and click Properties . 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons.
WEBSHARE 243WM 17 For Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections. 2. Double-click Local Area Connection 3.
WEBSHARE 243WM 18 4. Select Internet Protocol (TCP/IP) and click Properties . 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons 6.
WEBSHARE 243WM 19 3.4 Factory Default Settings Before configurating this WebShare 243WM Wireless , you need to know the following default settings. • Username: admin • Password: atlantis • IP address (192.
WEBSHARE 243WM 20 3.4.2 LAN and WAN Port Addresses The parameters of LAN and WAN ports are pre-set in the factory. Th e default values are shown below. LAN Port WAN Port IP address 192.168.1.254 Subnet Mask 255.255.255.0 DHCP server function Enabled N/A 3.
WEBSHARE 243WM 21 You will get a status report web page when login successfully. At the configuration homepage, the left navigation page where bookmarks are pr ovided links you directly to the desired.
WEBSHARE 243WM 22 • IP Address: A list of IP addresses of devices on your LAN (Local Area Network). • MAC Address: MAC (Media Access Control) address for each device on your LAN. • Interface: The interface name (on the router) t hat this IP Address connects to.
WEBSHARE 243WM 23 • Leased: DHCP assigned IP addresses information. • IP Address: IP addresses of devices on your LAN (Local Area Network). • MAC Address: The MAC Address that you want to assign the fixed IP address • Client Host Name: Expired IP addresses information • Register Time: Register time information 3.
WEBSHARE 243WM 24 3.6.2 Quick Start Guide For detailed instructions on c onfiguring WAN settings, see the WAN section of this manual. The information you need for the Quick Start wizard to get you online are your login (often in the form of username@ispname), your password, and the encapsulation type.
WEBSHARE 243WM 25 • NAT: Select “ Enabled ”. Optional Setting • IP Address: Type your ISP assigned IP address in the IP Address text box. • Subnet Mask: Enter a subnet mask in dotted decimal notation.
WEBSHARE 243WM 26 3.6.3 CONFIGURATION When you click this item, y ou get following sub-items to configure WebShare 243WM Wireless : • LAN • WAN • System • Firewall • QoS • Virtual Server • Advanced 3.
WEBSHARE 243WM 27 3.6.3.1.2 Wireless • Mode: 802.11b + g (Mixed mode), 802.11b and 802.11g. The factor y default is 802.11b + g. • ESSID: Enter the unique ID given to the Access Po int (AP), which is already built-in to the router’s wireless interfac e.
WEBSHARE 243WM 28 You must make sure that the SSID, Encryption and Channel is set the same as that AP you wish to c onnect. When WDS is enable only WEP ecryption is supported. The range of radio frequencies used by IEEE 802.11b wireless devices is called a “channel”.
WEBSHARE 243WM 29 3.6.3.1.3 Wireless Security You can disable or enable with WPA or WEP for protecting wireless network. The default mode of wireless security is disabled .
WEBSHARE 243WM 30 • WEP Encryption: To prevent unauthorized wireless st ations from accessing dat a transmitted over the network, the router offers highly secu re data encryption, known as WEP. If you require high security for tr ansmissions, there are two alternatives to select from: WEP 64 and WEP 128 .
WEBSHARE 243WM 31 To disable the router’s DHCP Server, check Disabled and click Next then click Apply. When the DHCP Server is disabled you need to manually assign a fixed IP address to each PC o n your network, and set the default gateway for eac h PC to the IP addre ss of the router (the default is 192.
WEBSHARE 243WM 32.
WEBSHARE 243WM 33 3.6.3.2 WAN Before you start installing this device, you have to check with your ISP what kind of service (connection method) is provided such as PPPo E, PPPoA, RFC1483 bridged or routed, IP oA. Gather the information as illustrated in the following table and keep it for reference.
WEBSHARE 243WM 34 PPPoE(RFC 2516) or PPPoA(RFC 2364) PPPoE (PPP over Ethernet) provides access control in a manner similar to dial-up services using PPP. PPPoA stands for Point to Point Protocol over ATM Adaptation Layer 5 (AAL5). It provides access control and billing functionality in a manner similar to dial-up services using PPP.
WEBSHARE 243WM 35 • Always on: If you want the router to es tablish a PPPoE session when starting up and to automatically re-establish the PPPoE session when disconnected by the ISP. • Connect to Demand(PPPoE only): If you want to establish a PPPoE session only when there is a packet requesting access to the Internet (i.
WEBSHARE 243WM 36 RFC 1483 Routing • Description: Your description of this connection. • VPI and VCI: Enter the information provided by your ISP. • NAT: The NAT (Network Address Translation) f eature allows multiple users to access the Internet through a single IP account, sharing the sing le IP address.
WEBSHARE 243WM 37 BRIDGE (PPPoE) • Description: A user-definable name for this connection. • VPI/VCI: Enter the information provided by your ISP. • Encapsulation method: Select the encapsulation format, this is provided by your ISP. 3.6.3.2.2 DNS A Domain Name System (DNS) contains a m apping table for domain name and IP addresses.
WEBSHARE 243WM 38 3.6.3.2.3 ADSL • ADSL Mode: There are four modes “ Annex A ”,” Annex L ”,” Annex M” ,” Annex J” , that user can select for this connection. • Modulator: There are four modes “ AUTO ”,” ADSL multimode ”,” ADSL2 ”and” ADSL2+ ” that user can select for this connection.
WEBSHARE 243WM 39 3.6.3.3 System There are six items within the System section: Time Zone, Remote Access, Firmware Upgrade, Backup/Restore, Restart and User Management.
WEBSHARE 243WM 40 3.6.3.3.3 Firmware Your router’s “firmware” is the software that allows it to operate and provides all its functionality. Think of your r outer as a dedicated computer, and the firmware as the software it runs. Over time this software may be impr oved and modified.
WEBSHARE 243WM 41 3.6.3.3.4 Backup/Restore These functions allow you to save and backup your router’s current settings to a file on your PC, or to restore a previously saved backup. This is useful if you wish to experiment with different settings, knowing that you have a backup handy in the ca se of any mistakes.
WEBSHARE 243WM 42 3.6.3.3.5 Restart Click Restart with option Current Settings to reboot your router and restore your last saved configuration. If you wish to restart the router using the fa ctory def.
WEBSHARE 243WM 43 You are strongly advised to chan ge the password on the default “ admin ” account when you receive your router, and any time you rese t your configuration to Factory Defaults.
WEBSHARE 243WM 44 3.6.3.4 Firewall Your router includes a full DoS firewall for cont rolling Internet access from your LAN, as well as helping to prevent attacks from hackers.
WEBSHARE 243WM 45 Packet filtering function enables you to configure your router to check specified internal/external user (IP address) from Internet access, or y ou can disable specific service request (Port number) to /from Internet.
WEBSHARE 243WM 46 • Packet Type: Specify the packet type (TCP, UDP, IC MP or any) that the rule will be applied to.Select TCP if you want to scope for the connection-based application service on the remote server using the por t number.
WEBSHARE 243WM 47 http(OutGoing/Ingoing):.
WEBSHARE 243WM 48 POP3 (OutGoing/Ingoing):.
WEBSHARE 243WM 49 SMTP (OutGoing/Ingoing):.
WEBSHARE 243WM 50 FTP (OutGoing/Ingoing)::.
WEBSHARE 243WM 51 DNS (OutGoing/Ingoing): 3.6.3.4.2 MAC address Filtering MAC filtering function enables you to configure y our ADSL Firewall Router to block internal user ( MAC address ) from Internet access. If you check Enable, remember to choosea defaulkt rules policy between Forward or Drop .
WEBSHARE 243WM 52 • Active: Select Yes from the drop down list box to enable MAC address filtering. • Action When Matched: Select “Drop” or “Forward”. • Log: Choose “Yes” if you wish to generate logs when the filer rule is applied to a packet.
WEBSHARE 243WM 53 • Alert Mail Time: Set the time for re ceiving Alert mail. • Your E-Mail: Set your email address. • Recipient’s E-mail: Set the Recipient’s email ad dress to which the E-<mail notification is sent. • SMTP server: Set the SMTP (mail) server address.
WEBSHARE 243WM 54 From/To: IP Address Block Mode: You can select when Router have yo use thess settings Keywords Filtering: Allows blocking by specific keywords within a partic ula r URL rather than having to specify a complete URL (e.g. to blo ck any image called “advertisement.
WEBSHARE 243WM 55 Restrict URL Features • Block Java Applet: Blocks Web content whic h includes the Java Applet to prevent someone who wants to damage your system via the standard HTTP protocol.
WEBSHARE 243WM 56 3.6.3.5 QoS Quality of Service Introduction If you’ve ever found your ‘net’ speed has slow ed to a crawl because another family member is using a P2P file sharing pr ogram, you’ll understand why the Qua lity of Service features in routers is such a breakthrough for home users and office users.
WEBSHARE 243WM 57 Application : A name that identifie s an existing policy. Time Schedule : Scheduling your QOS policy to be applied. Direction : The traffic flow direction to be controlled by the QOS policy.
WEBSHARE 243WM 58 : Before using these buttons to edit or delete a policy, please select one policy you want to edit/delete from the radio option . : After you have configured the policies, you can pre ss this button to apply the configuration. If you want to make the change persistent in flash, choose in the left windows to save it into flash.
WEBSHARE 243WM 59 ~ GRE: For PPTP VPN Connections. Assigned Data rate: Assign the data ratio for this poli cy to be controlled. For examples, we want to only allow 20% of the total data trans fer rate for the LAN-to -WAN direction to be used for FTP server.
WEBSHARE 243WM 60 Silver service (L) Class 2, Gold (010010) Silver service (M) Class 2, Silver (010100) Silver service (H) Class 2, Bronze (010110) Bronze service (L) Class 3, Gold (011010) Bronze ser.
WEBSHARE 243WM 61 QOS example for your Network Connection Diagram ADSL Subscription Rate Upstream: 256 kbps Downstream: 1024 Mbps Example QOS Plan :. Application IP or Ports Control Flow Data Rate Time Schedule VoIP User 192.
WEBSHARE 243WM 62 Example QOS Setup.
WEBSHARE 243WM 63 VoIP application Voice is latency-sensitive application. Most VoIP devices are use SIP protocol and the port number will be assigned by SIP module automatic ally. Better to use fi xed IP address for catching VoIP packets as high priority.
WEBSHARE 243WM 64 FTP Server Application Some of companies will setup FTP server for customer downloading or home user sharing their files by using FTP.
WEBSHARE 243WM 65 WAN to LAN direction: With above settings that help to limit utilization of upstream of FTP. Time schedule also help you to only limit utilization at day time.
WEBSHARE 243WM 66 HTTP Web Browsing You can control the internet web browsing by specify the HTTP 80 (8080 for some proxy server). LAN to WAN direction:.
WEBSHARE 243WM 67 WAN to LAN direction:.
WEBSHARE 243WM 68 3.6.3.6 Virtual Server When you click Virtual Server, you get the following figure. Being a natural Internet firewall, this network router protects your network from being accessed by outside users. When it needs to a llow outside users to access internal servers, e.
WEBSHARE 243WM 69 Application OutBound Inbound ICQ 98, 99a N/A N/A NetMeeting 2.1 a 3.01 N/A 1503 TCP, 1720 TCP VDO Live N/A N/A MIRC N/A N/A Cu-SeeMe 7648 TCP &UDP, 24032 UDP 7648 TCP &UDP, 2.
WEBSHARE 243WM 70 3.6.3.7 Advanced Configuration opt ions within the Advanced section are for users w ho wish to take advantage of the more advanced features of the router. Users who do not understand the features should not attempt to reconfigure their rout er, unless advised to do so by support staff.
WEBSHARE 243WM 71 E.G. 3.6.3.7.2 Dynamic DNS The Dynamic DNS function lets you alias a dynam ic IP address to a stat ic hostname, so if your ISP does not assign you a static IP address you can st ill use a domain name.
WEBSHARE 243WM 72 The Dynamic DNS service allows you to alias a dynamic IP address to a static hostname. This dynamic IP address is the WAN IP address. For example, to use the service, you must first apply for an account from this free Web server http://www.
WEBSHARE 243WM 73 Group individual ports into a small “Virtual” network of their own to be independent of the other ports. To add a VLAN group check on the por t to be a member to this VLAN Group, and press “ Apply ” button to execute the setting.
WEBSHARE 243WM 74 Embedded Web Server: HTTP Port: This is the port number the r outer’s embedded web serv er (for web-based configuration) will use. The default value is the standard HTTP port, 80. Users may specify an alternative if, for example, they are r unning a web server on a PC within their LAN.
WEBSHARE 243WM 75 Traps supported: Cold Start, Authentication Failure. The following MIBs are supported: • RFC 1213 (MIB-II): System group Interfaces group Address Translation group IP group ICMP gr.
WEBSHARE 243WM 76 The WebShare 243WM Wireless supports both IGMP version 1 (IGMP-v1) and IGMP version 2 (IGMP-v2). At star t up, the WebShare 243WM Wireless queries all directly connected networks to gather group membership. After that, the WebShare 243WM Wireless periodically updates this information.
WEBSHARE 243WM 77 Chapter 4 Troubleshooting If the Router is not functioning properly, you can refer first to this chapter for simple troubleshooting before contacting your service pr ovider. This could save you time and effort but if the symptoms persist, then consult your service provider.
WEBSHARE 243WM 78.
WEBSHARE 243WM 79 APPENDIX A Traffic Shaping Traffic Shaping is an agreement between the carrier and the s ubscriber to regulate the average rate and “burstiness” or fluctuation of data transmission over an ATM network.
WEBSHARE 243WM 80 APPENDIX B Technical Features Protocols IP, NAT, ARP, ICMP, IGMP, DHCP(server, client and relay), RIP1/2 , SNTP clien t, UPnP, Telnet server, SNMP LAN port 4 x RJ45 10/100 Base-T por.
WEBSHARE 243WM 81 APPENDIX C Firmware Recovery The detail instruction in Emer gency /Failure Recovery Button 1. Recovery procedures for non-working routers (e.g. after a failed firmware upgrade flash): Hold the Emergency/Failure Recovery Butt on on the back of the modem in.
WEBSHARE 243WM 82 APPENDIX D Support If you have any problems with the WebShare 243WM Wireless , please consult this manual. If you continue to have problems you should c ontact the dealer where you bought this ADSL Router.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Atlantis Land A02-RA243-W54M_ME01 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Atlantis Land A02-RA243-W54M_ME01 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Atlantis Land A02-RA243-W54M_ME01, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Atlantis Land A02-RA243-W54M_ME01 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Atlantis Land A02-RA243-W54M_ME01, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Atlantis Land A02-RA243-W54M_ME01.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Atlantis Land A02-RA243-W54M_ME01. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Atlantis Land A02-RA243-W54M_ME01 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
