Manuel d'utilisation / d'entretien du produit PVD2000 du fabricant Philco
Aller à la page of 28
Precautions Setup VCR Functions DVD Functions Español Information INSTRUCCIONES EN ESPAÑOL INCLUIDAS. Supplied Accessories AC outlets Plug in 4 5 F rom TV F rom D VD/VCR Please ref er to “Connections” on page 6.
Precautions – 2 – EN Precautions This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to po ssible eye injury. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
Precautions EN – 3 – 1. Read Instructions - All the safety and operating instruc- tions should be read before the appliance is operated. 2. Retain Instructions- The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.
Precautions – 4 – EN Symbols Used in This Manual The following symbols appear in some headings in this manual. Location and Handling • Do not stand this unit up vertically. Install this unit in a hori- zontal and stable position. Do not place anything directly on top of this unit.
Precautions EN – 5 – About the Video Cassettes and Discs Playable Discs Unplayable Discs NEVER play back the following discs. Otherwise, malfunction may result! DVD-RAM / DVD-Audio / CD-i / Photo .
Setup – 6 – EN SETUP > QUICK> DOLBY DIGITAL Connecting to a Dolby Digital decoder for Dolby Digital audio output. BITSTREAM Connecting to other equipment (an MD deck or DAT deck etc.
Setup EN – 7 – Admiral: AUX Curtis Mathis: LINE1, LINE2, 00, 90, 91, 92, 93 GE: INPUT, TV/VCR, 00, 90, 91, 92, 93 Hitachi: INPUT, AUX JVC: VIDEO, VIDEO1, VIDEO2, VIDEO3 Kenwood: AUX LXI-Series: 00.
Setup – 8 – EN 1 Turn on the TV and set it to channel 3. • If channel 3 has been already occupied for broadcasting, see “RF Output Channel” section on page 6. 2 Select your language when turning this unit on for the first time. Then press [ B ] to go to next step.
Setup EN – 9 – 6: VIDEO IN jack Connect a cable coming from the video out jack of a camcorder, another VCR or an audio-visual source (laser disc player, video disc player, etc.) here. 7: DVD/VCR VIDEO OUT jack Connect the supplied video cable here through the video in jack of a television.
Setup – 10 – EN ST ANDBY -ON DISPLA Y VCR DVD PA USE SLOW VCR/TV SKIP/CH. PLA Y STOP RECORD MENU SETUP TOP MENU MODE ZOOM SUBTITLE T- S E T ANGLE ENTER RETURN SEARCH MODE REPEA T A-B OPEN/CLOSE /EJECT SPEED AUDIO CLEAR/ C.
VCR Functions EN – 11 – 1 Press [SEARCH MODE] once. 2 To select Index Mark 3 4 After searching, it automatically starts playback. 1 Press [SEARCH MODE] twice. 2 Select the desired length of time for fast forwarding or rewinding. 3 4 After searching, it automatically starts playback.
VCR Functions – 12 – EN 1 Press [MENU] , then select “TIMER PROGRAMMING”. 2 Select an empty program number. Then press [ B ] to go to next step. 3 Select “ONCE”, “DAILY” (Mon-Fri), or “WEEKLY”. Then press [ B ] to go to next step. 2 Press [ B ] for “AUTO REPEAT”, “ON” or “OFF”.
VCR Functions EN – 13 – 10 Press [SUBTITLE/T-SET] to set timer standby mode. • TIMER indicator on the front panel lights up. The unit will change to the DVD mode. 6 Select “AM” or “PM”. Then press [ B ] to go to next step. 7 Repeat the procedure in steps 5 and 6 to set the end time.
VCR Functions – 14 – EN Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws. DIGITAL AUDIO OUT COAXIAL ANT -OUT ANT -IN AUDI O OUT DVD DVD/VCR VCR .
DVD Functions EN – 15 – Hint • Zooming function does not work while the disc menu is displayed. • x4 zoom is not available on some discs. • The picture may be distorted when you press [PAUSE k ] or [ h ] repeatedly in the zoom mode. • In the zoom mode, it automatically changes x2(x4) to the zoomed position guide.
DVD Functions – 16 – EN 1 When selecting the folder: 2 To cancel MP3 playback, press [STOP C ] . DV DV D STOP Insert an MP3-format disc, then the file list will automatically appear on the TV screen. Press [MENU] when you want to call up the file list if MP3-format disc is already inserted.
DVD Functions EN – 17 – 1 Press [RETURN ]. 1 Press [SEARCH MODE] repeatedly until the marker display appears. 2 Select the marker. 3 Press [ENTER] at the desired marker. 1 Press [SKIP/CH. G / o , H / p ] during playback. 1 Press [SEARCH MODE] repeatedly until the marker display appears.
DVD Functions – 18 – EN 1 Press [MODE] once. 2 Using [ K / L ] to select desired track. Press [ENTER] . 3 Press [PLAY B ] to start Programmed Playback. 1 Press [MODE] twice. 2 Press [PLAY B ] to start Random Playback . 1 Press [A-B] at your desired starting point (A).
DVD Functions EN – 19 – 1 Press [MODE] during playback. 2 Press [ENTER] to adjust the black level. 3 Press [RETURN ] to exit. RETURN 1 Press [MODE] twice (once for Audio CD and MP3) during playback. 2 Press [ENTER] for the desired effect. 3 Press [RETURN ] to exit.
DVD Functions – 20 – EN 2 Select “CUSTOM”. DVD Setup DV DV D Hint *1 • Language options are not available with some discs. • If OTHER is selected on the AUDIO, SUBTITLE or DISC MENU screen, press four-digit number to enter the code for the desired language.
DVD Functions EN – 21 – DISPLAY Setting You can change the display functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 20. B AUDIO Setting Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs.
DVD Functions – 22 – EN CONTROL LEVELS • ALL: All parental locks are canceled. • Level 8: DVD software of any grades (adult/general/children) can be played back. • Levels 7 to 2: Only DVD software intended for general use and children can be played back.
Information EN – 23 – Troubleshooting Guide If this unit does not perform properly when operated as instructed in this Owner's Manual, check this unit consulting the following checklist. • Some functions are not available in specific modes, but this is not a malfunction.
Information – 24 – EN Language Code List Specifications A-B Abkhazian 4748 Afar 4747 Afrikaans 4752 Albanian 6563 Amharic 4759 Arabic 4764 Armenian 5471 Assamese 4765 Aymara 4771 Azerbaijani 4772 .
Español ✄ – 25 – ES 1 • Si no se ha ajustado el reloj, aparece la pantalla AJUSTE DE RELOJ cuando pulse [MENU] . En este caso, vaya al paso 2. 2 Seleccione el mes actual. 3 Seleccione el dia actual. 4 Seleccione el año actual. 5 Seleccione la hora actual.
Español ✄ – 26 – ES Reproducción de la grabadora de vídeo Reproducción de DVD/ CD 7 Control remoto 8 Antes: Encienda el televisor y cambie al canal 3. • Si el canal 3 se está utilizando para una transmisión, vea la sección “Canal de salida RF”.
✄ EN – 27 – 1 Turn on the TV and set it to channel 3. • If channel 3 has been already occupied for broadcasting, see “RF Output Channel” section. 2 Select your language in the first time you turn on this unit. Then press [ B ] to go to next step.
✄ VCR Playback DVD/CD Playback 7 Remote Control 8 Before: Turn on the TV and set it to channel 3. • If channel 3 has been already occupied for broadcasting, see “RF Output Channel” section. 2 4 PLA Y STOP OPEN/CLOSE /EJECT Before: Turn on the TV, amplifier and any other components which are connected to this unit.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Philco PVD2000 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Philco PVD2000 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Philco PVD2000, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Philco PVD2000 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Philco PVD2000, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Philco PVD2000.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Philco PVD2000. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Philco PVD2000 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
