Manuel d'utilisation / d'entretien du produit HDS200 du fabricant Peerless Industries
Aller à la page of 36
ISSUED: 07-24-12 SHEET #: 180-9023-1 User Manual and Installation Guide Pro Wireless Multimedia Kit Models: HDS200 HDS200-2 HDS200-3 HDS200-4 REA D Y ®.
.
3 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Contents Safety Precautions ...........................................................................................................................................4 Proper Care and Safety ..............
4 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Please read this manual before using the product. • Unit can be placed vertically (preferred) or horizontally . • T o clean, use a soft, dry cloth only . Do not use water or other cleaning products as they may cause electrical failure or damage the surface of the product.
5 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 HD Flow Pro Wireless Multimedia Kit provides Full HD 1080p signal transfer , including 3D signal*, without the hassle of running cables.
6 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 2 x HDMI up to 1080p (60Hz) 1 x Composite 1 x YPbPr Component 1 x HDMI up to 1080p (60Hz) 1 x Composite 1 x YPbPr Component H.264 Baseline Profile with Level 4.2 HDCP compliant Wireless Connection Supporting IEEE 802.
7 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Video Format Supported • Digital Video º HDMI - Up to 1080p @ 24Hz, 25Hz, 30Hz, 50Hz, 60Hz • Analog Video º Composite – 480i @ 60Hz, 70Hz, 85Hz º .
8 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 T ransmitter Front 1 2 3 4 5 6 7 T ransmitter.
9 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 T ransmitter Front 1. Power/Link Indicator Light • Blinking indicator light - System booting or establishing link between the T ransmitter and the Receiver . • Quick blinking indicator light - Software upgrading or wireless/LAN mode switching.
10 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 2 T ransmitter Back 1 3 4 5 6 7 8.
1 1 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 T ransmitter Back 1. HDMI 1 IN • HDMI1 input port 2. HDMI 2 IN • HDMI2 input port 3. A V -IN • Composite input port 4. IR-OUT • Connects IR Flasher to the T ransmitter for remote control of external devices which are connected to the T ransmitter (i.
12 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 1 2 3 4 5 6 Receiver Front Receiver.
13 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Receiver Front 1 . Power/Link • Blinking indicator light - System booting or establishing link between the T ransmitter and the Receiver . • Rapid blinking indicator light - Software upgrading or wireless/LAN mode switching.
14 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 1 2 3 4 5 6 7 8 Receiver Back.
15 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Receiver Back 1. HDMI-OUT • HDMI output port 2. A V -OUT • Composite output port 3. IR-IN • Connects the IR Extender in order to extend IR reception range. 4. AUDIO-OUT* • Stereo audio output port 5.
16 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 1 4 3 6 7 2 5 8 1 . POWER Button - T urns the T ransmitter and Receiver power ON/OFF . • ON: If the T ransmitter and Receiver are powered off and the Po.
17 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 3. VIDEO OUT (Receiver) - Selects the Audio/Video output port of the Receiver . • HDMI - Selects HDMI as the Audio/Video output. • Component - Selects Component as the Audio/Video output. • A V - Selects A V as the Audio/Video output.
18 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Installing the Remote Control Battery The battery slip is located on the bottom of the remote control. Step 1 Push the tab, located on the left of the battery slip, to the right and pull out the slip.
19 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Before starting the installation, please ensure that all source components (Blu-ray player , cable box, etc.) and the display equipment (TV , display , projector , etc.) are turned off. Step 1 Connecting Source Components T o The T ransmitter A.
20 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 A. Connect the provided IR Flasher to the IR-OUT port of the T ransmitter . B. Find the location of the IR widow on your component and adhere the IR Flasher Eye directly over the IR window of your component.
21 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Step 5 Powering-up the HD Flow Multimedia Kit Plug in the power adapters for the T ransmitter and the Receiver to available power outlets. Plug in the other end of the power cable to the T ransmitter and then to the Receiver .
22 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 While turning on the display device, the HD Flow Pro Wireless Multimedia Kit will be going through the start up process. The process takes about 1.5 to 2 minutes to complete. The Power/Link Indicator Light on the T ransmitter and the Receiver should be fl ashing at fi rst.
23 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Notes: 1. Audio and video sources will switch simultaneously whether using the remote or Power/Source Selection Button.
24 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Notes: 1. We recommend that you disconnect and then re-connect the LAN cable to ensure LAN operation. Once video and audio come back up, the process is complete.
25 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Step 5 Under the heading “Streaming I/F” use the pull down menu to change WiFi to LAN. Step 6 Enter the proper IP address, for the unit being set up, based on the network's domain. Step 7 Once all the settings have been entered click the Submit button at the bottom of the form.
26 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Receiver • HDMI, COMPO, A V - The indicator light will be solid for the selected port as long as the output cable is present and connected to the output device. If no output device is detected by the selected output port, the indicator light will be fl ashing.
27 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Note: Peer-to-Peer units can be con fi gured to multicast mode using the USB Multicast Set-Up Method or LAN Multicast Set-Up Method. Additional Receivers (HDS200-R) are required and sold separately . Please visit http://www .
28 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Q. What compression standard does the HD Flow use to stream Full HD 1080p content? A. H.264 Baseline Pro fi le Level 4.2 video compression. Q. Does HD Flow Pro Wireless Multimedia Kit deliver 5.1 audio? A.
29 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Q. Can the HD Flow Pro Wireless Multimedia Kit be set to default to a speci fi c input/output if the unit is turned off or power is lost? A. Y es, the HD Flow Pro Wireless Multimedia Kit can be set to desired input and output ports via a programming page that can be accessed by using LAN programming.
30 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Factory Reset CAUTION Factory reset will revert all settings to factory defaults. It is not recommended to perform factory reset on multicast systems (systems that have two or more Receivers). If there are issues with multicast systems, please reference http://www .
31 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 How to Check Firmware V ersion Step 1 Connect the Receiver that needs its fi rmware to be checked to the display device (reference the installation section of this manual).
32 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 HDMI D Ͳ Sub AV(CVBS) HDMI COMP AV(CVBS) OO X O X X OO X O X X OO X O X X OO X O X X OO X O X X OO X O X X OO X O ^ X OO X O X X OO X O X X OO X O ^ X OO.
33 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 FCC Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
34 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 1 YEAR LIMITED W ARRANTY The HDS200 is distributed by Peerless Industries, Inc. using the highest quality components and technology available.
35 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Customer Care Need help with installation or set up? Call Peerless-A V Customer Care 1-1-800-865-21 12 (available 7:00am- 7:00pm CST , Monday - Friday), or email us at info@peerless-av .com. Peerless -A V 2300 White Oak Circle Aurora, IL 60502 USA www .
Distributed exclusively by Peerless Industries, Inc. 2300 White Oak Circle, Aurora, IL 60502 USA 1-800-865-21 12 www .peerless-av .com www .hd fl ow .com ©2012 Peerless-A V . All rights reserved. Peerless-A V is a trademark of Peerless Industries, Inc.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Peerless Industries HDS200 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Peerless Industries HDS200 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Peerless Industries HDS200, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Peerless Industries HDS200 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Peerless Industries HDS200, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Peerless Industries HDS200.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Peerless Industries HDS200. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Peerless Industries HDS200 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
