Manuel d'utilisation / d'entretien du produit 2172 du fabricant Patton electronic
Aller à la page of 22
USER MANUAL MODEL 2172 CopperLINK™ High Speed Ethernet Extender s SALES OFFICE (301) 975-1000 TECHNICAL SUPPOR T (301) 975-1007 P ar t# 07M2172-UM Doc# 03333U2-001 Rev .
2 CONTENTS 1.0 Warranty Information ................................................................. 4 1.1 Compliance ................................................................................... 4 EMC Compliance:...............................
3 C.1 10/100Base-T Interface .............................................................. 20 RJ-45 .......................................................................................... 20 C.2 CopperLINK Interface ...............................
4 1.0 W ARRANTY INFORMATION P atton Electronics warrants all Model 2172 components to be free from def ects, and will—at our option—repair or replace the product should it f ail within one year from the first date of the shipment.
5 tele vision reception, which can be determined by disconnecting the cables , tr y to correct the interference b y one or more of the f ollowing measures: moving the computing equipment aw ay from th.
6 1.5 SAFETY WHEN W ORKING WITH ELECTRICITY • This device contains no user serviceable parts. The equipment shall be returned to Patton Electronics for repairs, or repaired by qualified service personnel. • Mains Voltage: Ensure that the external power adapter is a listed Limited Power Source.
7 2.0 GENERAL INFORMATION Thank you f or your purchase of this P atton Electronics product. This product has been thoroughly inspected and tested and is warranted f or one year f or par ts and labor . If any questions or problems arise during installation or use of this product, contact P atton Electronics T echnical Suppor t at +1 (301) 975-1007.
8 Figure 1. T ypical application The pair of 2172 models work together to create a transparent e xtension between two peered Ethernet LANs. Figure 1 shows a typical point-to- point application. 3.0 INSTALLATION T o install the 2172 Ethernet Extender , do the follo wing: 1.
9 Figure 2. Model 2172 standalone rear panel 3.1 CONNECTING THE T WISTED-PAIR LINE INTERFACE The Model 2172 suppor ts communication between two peer Ethernet LAN sites ov er a distance of up to 6,000 ft (1.8 km) over 24 A WG (0.5 mm) twisted-pair wire.
10 19 (0.9mm) and 26 A WG (0.4mm). Leased circuits that run through signal equalization equipment are not acceptable . 2. The Model 2172 is equipped with either an RJ-45 or a terminal block interf ace jac k that can be used on the CopperLINK interface.
11 Figure 4. Model 2172 (T erminal Block) twisted pair line interface . 3.2 CONNECTING THE 10/100BASE-T ETHERNET INTERFACE The shielded RJ-45 por t labeled Ethernet is the A uto-MDIX10/100Base- T interf ace. This por t is designed to connect directly to a 10/100Base-T network.
12 3.3 CONNECTING POWER The Model 2172 does not hav e a power s witch, so it powers up as soon as it is plugged in. An e xternal AC or DC pow er supply is availab le separately . This connec- tion is made via the barrel jack on the rear panel of the Model 2172.
13 Figure 6. Removing protectiv e cover Figure 7 on page 13 shows the orientation of the DIP switches in the On and Off positions. Figure 7. DIP switch orientation Power Link Ethernet CopperLINK™ Hi.
14 4.2 CONFIGURING DIP SWITCH S2 DIP s witch S2 is where y ou configure the CopperLINK line rate, symmet- ric or asymmetr ic, Ethernet, and Ether net Shutdown. T able 1 summa- rizes def ault positions of DIP s witches S2-1 through S2-8. Detailed descriptions of each switch f ollow the table .
15 Switches S2-4, S2-5 and S2-6: Ethernet Configuration Use s witches S2-4, S2-5 and S2-6 to configure Ethernet settings. Switch S2-7: Ethernet Shutdown Use s witch S2-7 to enable or disab le Ethernet Shutdown. When Ethernet Shutdown is enab led, the 2172 will disable the Ether net interf ace when there is no CopperLINK link detected.
16 operating mode and Ethernet Shutdown mode configuration. The S2-8 switch does not aff ect the data rate. The data r ate will alwa ys follow the L configur ation. 5.0 OPERATION Once the Model 2172s are properly installed, they should operate trans- parently .
17 Figure 8. Model 2172 standalone unit front panel T able 8: F ront panel LED descr iption LED Description PWR Solid GREEN to indicate the unit is powered on. LINK Solid GREEN (ON) to indicate that the end-to-end CopperLINK link between the Model 2172s is estab- lished.
18 APPENDIX A SPECIFICATIONS A.1 LAN CONNECTION • Shielded RJ-45, 10/100Base-T , IEEE 802.3 Ether net • CopperLINK Connection: RJ-45 or T erminal Block A.2 T RANSMISSION LINE T wo-wire unconditioned twisted pair. A.3 COPPERLINK LINE RATE AND COPPERLINK DISTANCE • Line Rate: 50 Mbps, symmetric upstream/downstream.
19 APPENDIX B MODEL 2172 SERIES F ACTOR Y REPLACEMENT P AR TS AND ACCESSOR IES *Only required with optional UI power supply (08055DCUI) P atton Model # Description Base Models 2172/E CopperLINK Multi .
20 APPENDIX C MODEL 2172 SERIES INTERFACE PIN ASSIGNMENT C.1 10/100BASE-T INTERFACE RJ-45 • Pin 1: TX+ • Pin 2: TX- • Pin 3: RX+ • Pin 6: RX- • Pins 4, 5, 7, 8: no connection C.2 COPPERLINK INTERFACE RJ-45 • Pin 4: RING • Pin 5: TIP • Pins 1, 2, 3, 6, 7, 8: no connection T erminal Block Figure 1.
21 APPENDIX D DISTANCE CHAR T, BASED ON 24 A WG (0.5 MM) Note The actual distance and link performance ma y var y depending on the environment and type/gauge of wire used. Note DS = downstream, US = upstream Symm Line Rate Distance in feet (km) Throughput at Max Distance 50 Mbps 800 (0.
22 Cop yright © 2001, 2002, 2006 P atton Electronics Company All Rights Reser ved..
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Patton electronic 2172 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Patton electronic 2172 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Patton electronic 2172, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Patton electronic 2172 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Patton electronic 2172, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Patton electronic 2172.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Patton electronic 2172. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Patton electronic 2172 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
