Manuel d'utilisation / d'entretien du produit TQBJ0303-1 du fabricant Panasonic
Aller à la page of 60
Model No. PT -LB90NTE PT -LB90E PT -LB78VE PT -LB75VE Operating Instructions LCD Projector Commercial Use Thank you for purchasing a Panasonic Projector . Before operating this product, please read the instructions carefully , and save this manual J for future use.
Important Safety Notice 2 - E NGLISH Important Information Dear Panasonic Customer: This instruction booklet provides all the necessary operating information that you might require. We hope it will help you to get the most out of your new product, and that you will be pleased with your Panasonic LCD projec- tor .
Important Safety Notice E NGLISH - 3 Important Information Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used elec- trical and electronic products and batteries should not be mixed with general household waste.
Important Safety Notice 4 - E NGLISH Important Information Declaration of Conformity Declaration of Conformity (DoC) This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Important Safety Notice E NGLISH - 5 Important Information.
6 - E NGLISH Contents User logo display function Y ou can project your unique image such as yourcompany’slogowhenprojectionstarts. ( Æ page 38) FUNCTION button Y ou can assign almost all the items on the on-screen menu to the FUNCTION button of the remote control and control panel.
Important Information Preparation Getting Started Basic Operation Settings Maintenance Appendix E NGLISH - 7 Controlling the volume of the speaker ................. 27 Projecting an image in INDEX-WINDOW mode .. 27 Enlarging the image ................
Precautions with regard to safety 8 - E NGLISH Important Information W ARNING POWER The mains socket or the circuit breaker shall be installed near the equipment and shall be easily accessible when problems occur . If the followings problems occur , cut off the power supply immediately .
Precautions with regard to safety E NGLISH - 9 Important Information Do not look into or touch the lights emit - ted from the lens while the projector is being used. Doing so can cause burns or loss of sight. Stronglightisemittedfromtheprojector ’ slens.
Precautions with regard to safety 10 - E NGLISH Important Information ON USE/INST ALLA TION Do not put your weight on this projector . Y ou could fall or the projector could break, and injury will result. Be especially careful not to let young children stand z or sit on the projector .
Precautions with regard to safety E NGLISH - 1 1 Important Information Cautions on use In order to get the picture quality Draw curtains or blinds over windows and turn off any lights near the screen to prevent outside light or light from indoor lamps from shining onto the screen.
Precautions with regard to safety 12 - E NGLISH Important Information Accessories Make sure the following accessories are provided with your projector . Remote control for PT -LB90NTE (×1) (N2QA YB000436) Remote control for PT -LB90E/LB78VE/ LB75VE (×1) (N2QA YB000262) Mains lead (×1) (K2CM3DR00004) RGB signal cable (×1) 1.
Read this rst E NGLISH - 13 Preparation Read this rst Whenyoustarttheprojectionforthersttimeoraftertheprojectorisinitialised ( Æ page 44), the LANGUAGE menu and the INITIAL SETTING menu will be displayed.
About Y our Projector 14 - E NGLISH Preparation About Y our Projector Projector body T op and front view J Zoom ring Adjust the projection size . ( Æ page 25) Adjuster button ( Æ page 18) Remote control signal receptor Ambient Luminance Sensor (ALS) TEMP indicator Indicates the temperature status.
About Y our Projector E NGLISH - 15 Preparation Back and bottom view J Lamp unit compartment ( Æ page 51) T erminals AC IN Connect the mains lead to supply electronic power to the projector . ( Æ page 21) Security lock Attach the commercial shackle lock, manufactured by Kensington, to protect your projector .
About Y our Projector 16 - E NGLISH Preparation Remote control J T op view Remote control signal emitters Front view J POWER button Switch between stand-by mode and projection mode. ( Æ page 23, 24) Switch the required input signal button to select. (The NETWORK button is only for PT -LB90NTE) (See CD-ROM contents.
Setting up E NGLISH - 17 Getting Started Setting up Screen size and throw distance Y oucanadjusttheprojectionsizewith1.2×zoomlens.
Setting up 18 - E NGLISH Getting Started Projection method Y ou can use the projector with any of the following 4 projection methods. T o set the desired method in the projector , see “INST ALLA TION” on page 41.
Connections E NGLISH - 19 Getting Started Connections Before connecting to the projector Read and follow the operating instructions of each peripheral device. z The peripheral devices must be turned off. z One RGB cable is provided with the projector .
Connections 20 - E NGLISH Getting Started Connecting example: Computers Computer Audio system Computer Computer Computer (Controlling a projector) Note WhenconnectingtheRGBsignalcable,besuretosecurelytightenthexingscrewsontheD-Sub(15-pin) z mains socket.
Switching the projector on/off E NGLISH - 21 Basic Operation Switching the projector on/off Mains lead Be sure to x the mains lead to the projector with the provided “Power cord secure lock” to prevent the mains lead from coming off. Connect the provided mains lead securely .
Switching the projector on/off 22 - E NGLISH Basic Operation POWER and POWER LOCK indicators The POWER indicator informs you of the status of the power and the POWER LOCK indicator shows the status of the RELEASE button.
Switching the projector on/off E NGLISH - 23 Basic Operation Switching on the projector Before switching on the projector , make sure the mains lead and all the other devices are connected correctly . ( Æ page 19) INPUT SELECT RELEASE POWER indicator POWER LOCK indicator (2) (3) Connect the mains lead.
Switching the projector on/off 24 - E NGLISH Basic Operation Switching off the projector When operating the projector , check the status of the POWER indicator . ( Æ page 22) INPUT SELECT RELEASE POWER indicator POWER LOCK indicator (1), (2) Press the POWER button.
Projecting an image E NGLISH - 25 Basic Operation Projecting an image Conrmtheconnectionsoftheperipheraldevices ( Æ page 19, 20) and mains lead ( Æ page 21). Switch on the power ( Æ page 23) and the projector starts projecting.
Remote control operation 26 - E NGLISH Basic Operation Remote control operation Capturing an image Y ou can freeze the projected image and stop the sound temporarily , regardless of the playing condition of the connected device. Press button. Press the FREEZE button again to escape.
Remote control operation E NGLISH - 27 Basic Operation Setting up the image position automatically When a RGB signal is input, the projector adjusts the SHIFT , DOT CLOCK and CLOCK PHASE automatically . Press button. Screen Projected image Remarks The z SIGNAL SEARCH oper ation is al so perform ed.
Remote control operation 28 - E NGLISH Basic Operation Enlarging the image Y ou can enlarge the projected image down to a centred area for emphasizing within the range of 1× to 2×.
Menu Navigation E NGLISH - 29 Settings Menu Navigation Navigating through the MENU Operating procedure J Press the MENU button. 1 ) The main menu is displayed.
Menu Navigation 30 - E NGLISH Settings The menu system allows you to access functions which do not have their own dedicated buttons on the remote control. The menu options are structured and categorised. For the menu operation, see “Navigating through the MENU”.
Menu Navigation E NGLISH - 31 Settings POSITION [ J ] Sub-menu item Default Page REAL TIME KEYSTONE ON 34 KEYSTONE 0 34 SHIFT * 1 0 34 DOT CLOCK * 1 0 34 CLOCK PHASE * 1 0 34 OVER SCAN * 1 0 35 ASPECT * 1 16:9 35 FRAME LOCK * 1 OFF 36 The setting is active or deactive, depending on the *1: inputsignalandthespecicsetting.
PICTURE menu 32 - E NGLISH Settings PICTURE menu Navigating through the MENU ( Æ page 29), select PICTURE from the main menu and then select the required item from the sub-menu.
PICTURE menu E NGLISH - 33 Settings DA YLIGHT VIEW Y ou can keep the projected image bright and vivid even in well-lit rooms where the ambient light sources cannot be controlled, such as when a door opens or when window coverings fail to block out sunlight.
POSITION menu 34 - E NGLISH Settings POSITION menu Navigating through the MENU ( Æ page 29), select POSITION from the main menu and then select the required item from the sub-menu.
POSITION menu E NGLISH - 35 Settings OVER SCAN Use this function when characters or pictures are cropped near the periphery of the projected image. (Available with signals of S-VIDEO/VIDEO/RGB (Moving image)/ YP B P R only) Zoom out Zoom in Setting range: 0 to +3 z Remarks OVER SCAN z is not available when network signals are input.
POSITION menu 36 - E NGLISH Settings S4:3 J When a standard signal * 1 is input, the input signal will be sized down 75% and projected. S4:3 mode is effective when projecting 4:3 image onto a 16:9 screen. Input signal: XGA z Image: Panel: Screen: THROUGH J The image will be projected without any size adjustment.
LANGUAGE menu E NGLISH - 37 Settings LANGUAGE menu Navigating through the MENU ( Æ page 29), select LANGUAGE from the main menu and then display the sub-menu. Selecttherequiredlanguagewith▲▼buttons z and press the ENTER button to set.
DISPLA Y OPTION menu 38 - E NGLISH Settings DISPLA Y OPTION menu Navigating through the MENU ( Æ page 29), select DISPLA Y OPTION from the main menu and then select the required item from the sub-menu. Settheselecteditemwith◄►buttons.
DISPLA Y OPTION menu E NGLISH - 39 Settings Editing the original text J Press◄►buttons to select TEXT and 1 ) press the ENTER button. Press▲▼buttons to select the required 2 ) line and press the ENTER button. Y oucanenterandeditthetextsfortherstlinein TEXT1 and the texts for the second line in TEXT2 .
DISPLA Y OPTION menu 40 - E NGLISH Settings OTHER FUNCTIONS Y ou can perform some of the remote control button operations from the sub-menu. AUT O SETUP J For details, see “Setting up the image position automatically”. ( Æ page 27) FREEZE J Y ou can capture the projected image and see it as a still picture.
PROJECT OR SETUP menu E NGLISH - 41 Settings PROJECT OR SETUP menu Navigating through the MENU ( Æ page 29) , select PROJECTOR SETUP from the main menu and then select the required item from the sub-menu. Settheselecteditemwith◄►buttons.
PROJECT OR SETUP menu 42 - E NGLISH Settings ST ANDBY MODE Y ou can change the standby mode setting. Change setting Change setting ECO The standby power is reduced to 0.
PROJECT OR SETUP menu E NGLISH - 43 Settings FUNCTION BUTT ON Y ou can select a useful function from the list and assign it to the FUNCTION button as a short-cut. Press the MENU button of the control 1 ) panel or remote control to display the on screen menu (main menu, sub- menu or detailed menu).
PROJECT OR SETUP menu 44 - E NGLISH Settings TEST P A TTERN Y ou can use the 7 different test patterns to adjust the focus of the image. Press the ENTER button to display the test pattern. Change pattern Change pattern Press the MENU or RETURN button to return to the PROJECTOR SETUP menu, or press repeatedly to escape the menu mode.
SECURITY menu E NGLISH - 45 Settings SECURITY menu Navigating through the MENU ( Æ page 29), select SECURITY from the main menu and then select the required item from the sub-menu. When you apply to the z SECURITY menu for thersttime,youwillbeaskedtoperformthe password operation.
SECURITY menu 46 - E NGLISH Settings MENU LOCK Press the MENU button to display the menu. Y ou can lock or unlock the menu operation. Change setting Change setting OFF Unlock the menu operation ON Lock the menu operation Remarks Once z MENU LOCK is set to ON , you cannot use the MENU button unless you input the correct password.
NETWORK menu (PT -LB90NTE only) E NGLISH - 47 Settings NETWORK menu (PT -LB90NTE only) Navigating through the MENU ( Æ page 29), select NETWORK from the main menu and then select the required item from the sub-menu. Settheselecteditemwith◄►buttons.
LAMP and TEMP Indicators 48 - E NGLISH Maintenance LAMP and TEMP Indicators Managing the indicated problems If a problem should occur with the projector , the LAMP and/or TEMP indicators will inform you.
Care and Replacement E NGLISH - 49 Maintenance Care and Replacement Before Care and Replacement Before cleaning, be sure to turn off the power and disconnect the mains plug from the mains socket. z ( Æ page 21) Be sure to turn off the power as described in “Switching of f the projector”.
Care and Replacement 50 - E NGLISH Maintenance Replacing the Lamp unit Air lter J Theairltershouldbereplacedwhencleaningisineffectiveandwhenreplacingthelampunit. A replacement airlterisprovidedwithareplacementlampunit(ET -LAB80).
Care and Replacement E NGLISH - 51 Maintenance J Lamp replacement procedure When the projector is mounted in the ceiling, do not work directly under the projector or put your face close z to the projector . Be sure to install the lamp unit and attach the lamp unit cover securely .
Care and Replacement 52 - E NGLISH Maintenance Attach the lamp unit cover and tighten the 2 lamp unit cover xing screws securely 5 ) with a Phillips-head screwdriver . Connect the mains lead to a mains socket. 6 ) Press the POWER button and the projection starts.
T roubleshooting E NGLISH - 53 Maintenance T roubleshooting Conrmthefollowingproblemandcause. Should any problem persist, contact an Authorised Service Centre. Problem Cause Page Power does not turn on. The mains lead may not be connected securely .
T echnical Information 54 - E NGLISH Appendix T echnical Information List of compatible signals This projector can project the following image signals. Mode Display resolution (dots) * 1 Scanning frequency Dot clock frequency (MHz) Picture quality * 2 PnP availability * 3 T erminals H (kHz) V (Hz) NTSC/NTSC4.
T echnical Information E NGLISH - 55 Appendix Serial terminal TheserialconnectorwhichisontheconnectorpaneloftheprojectorconformstotheRS-232Cinterfacespeci - cations, so that the projector can be controlled by a personal computer which is connected to this connector .
T echnical Information 56 - E NGLISH Appendix J Cable specications (When connected to a personal computer) Control commands J The following commands are used for control of the projector with a computer . (Operation commands) Command Control contents Remarks PON Power on The PON command is ignored during lamp ON control.
Specications E NGLISH - 57 Appendix Specications Thespecicationsofthisprojectorareasfollows. Power supply AC 100 - 240 V 50 Hz/60 Hz Power consumption 300 W During standby (when fan is stopped): Approx. 0.9 W Amps 3.7 A - 1.
58 - E NGLISH Appendix Specications Wireless LAN (PT -LB90NTE only) Compatible IEEE802.1 1 b/IEEE802.1 1 g (Wireless LAN standard protocol) Wireless channel IEEE802.
Index E NGLISH - 59 Appendix Index A Accessories ................................... 12 ASPECT ........................................ 35 AUDIO SETTING ........................... 43 AUTO SETUP ..........................27, 39 A V MUTE ..............
F1009-2109C TQBJ0303-1 EEEYönetmeliğineUygundur . EEE Complies with Directive of T urkey . Dimensions Unit: mm 233 (9 - 5/32") 97 3 - 13/16" 88 3 - 7/16" 93 3 - 21/32" - 3/16" 5 4 - 5/32" 9 - 1 1/32" 2 - 1/8" 54.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Panasonic TQBJ0303-1 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Panasonic TQBJ0303-1 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Panasonic TQBJ0303-1, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Panasonic TQBJ0303-1 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Panasonic TQBJ0303-1, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Panasonic TQBJ0303-1.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Panasonic TQBJ0303-1. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Panasonic TQBJ0303-1 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
