Manuel d'utilisation / d'entretien du produit PT-RW330U du fabricant Panasonic
Aller à la page of 128
Thank you for purchasing this Panasonic product. ■ Before operating this product, please read the instructions carefully and save this manual for future use. ■ Before using your projector , be sure to read “Read this rst!” ( x pages 2 to 8).
2 - ENGLISH Read this rst! Read this rst! W ARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DONOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Power Supply: This Projector is designed to operate on 100 V - 240 V , 50 Hz/60 Hz AC, house current only .
ENGLISH - 3 Read this rst! FCC NOTICE (USA) Declaration of Conformity Model Number: PT -RZ370U/PT -RW330U T rade Name: Panasonic Responsible Party: Panasonic Corporation of North America Address: One Panasonic W ay , Secaucus, NJ 07094 T elephone number: (877)803-8492 E-mail: projectorsupport@us.
4 - ENGLISH Read this rst! W ARNING: PO WER The wall outlet or the circuit breaker shall be installed near the equi pment and shall be easily accessible when problems occur . If the following problems occur , cut off the power supply immediately .
ENGLISH - 5 Read this rst! W ARNING: Do not cover the air intake/exhaust ports or place anything within 500 mm (20") of them. Doing so will cause the projector to overheat, which can cause re or damage to the projector . z Do not place the projector in narrow , badly ventilated places.
6 - ENGLISH Read this rst! W ARNING: ACCESSORI ES Do not use or handle the batteries improperly , and refer to the following. Failure to observe this will cause burns, batteries to leak, overheat, explode or catch re. z Use AA/R6/LR6 batteries.
ENGLISH - 7 Read this rst! CAUTION: PO WER When disconnecting the power cord, be sure to hold the power plug and power connector . If the power cord itself is pulled, the lead will become damaged, and re, short-circuits or serious electric shocks will result.
8 - ENGLISH Read this rst! Brazil Only Brasil Apenas Manuseio de b at eria s usada s BR A SIL Após o uso, as pilhas e /ou baterias poderão ser entregues ao estabelecimento comercial ou rede de assistência técnica autorizada.
ENGLISH - 9 r T rademarks f SOLID SHINE is a trademark of Panasonic Corporation. f Windows ® , Windows Vista ® , and Internet Explorer ® are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. f Mac, Mac OS, OS X, and Safari are registered trademarks of Apple Inc.
10 - ENGLISH Features of the Projector Easy setup and improved serviceability ▶ A highly exible setup is achieved with a 2x zoom lens, wide range of the lens shift, and DIGIT AL LINK ( x page 16) compatibility .
ENGLISH - 1 1 Contents Contents Be sure to read “Read this rst!” from page 2. Read this rst! ............................................ 2 Chapter 1 Preparation Precautions for use ................................................. 14 Cautions when transporting .
12 - ENGLISH Contents [DISPLA Y OPTION] menu ........................................ 59 [COLOR MA TCHING] ........................................... 59 [SCREEN SETTING] (only for PT -RW330U) ........ 60 [AUTO SIGNAL] ................................
ENGLISH - 13 Chapter 1 Preparation This chapter describes things you need to know or check before using the projector ..
Chapter 1 Preparation — Precautions for use 14 - ENGLISH Precautions for use Cautions when transporting f When transporting the projector , hold it securely by its bottom and avoid excessive vibration and impacts. Doing so may damage the internal components and result in malfunctions.
Chapter 1 Preparation — Precautions for use ENGLISH - 15 r Cautions when setting up the projector f T o install and use the projector via a method that does not use the adjustable feet in a oor standing installation, x the projector using the four screw holes for ceiling mounting (as shown in the gure).
Chapter 1 Preparation — Precautions for use 16 - ENGLISH f Panasonic Corporation or its afliate companies will never ask for your password directly . Do not divulge your password in case you receive such inquiries. f The connecting network must be secured by a rewall, etc.
Chapter 1 Preparation — Precautions for use ENGLISH - 17 Accessories Make sure that the following accessories are provided with your projector . Numbers enclosed in < > show the number of accessories.
Chapter 1 Preparation — Start-up display 18 - ENGLISH Start-up display The initial setting screen is displayed when the projector is switched on for the rst time after purchase as well as when [ALL USER DA T A] ( x page 81) in [INITIALIZE] is executed.
Chapter 1 Preparation — About your projector ENGLISH - 19 About your projector Remote control $WWDFKDVWUDSDFFRUGLQJWR XVDJHFRQGLWLRQ )URQW 7R S 1 Remote control indicator Flashes if any button in the remote control is pressed.
Chapter 1 Preparation — About your projector 20 - ENGLISH Projector body )URQW )URQW )URQW 6LGH 5HDU )URQW %RWWRP 1 Power indicator <ON (G)/ST ANDBY (R)> Displays the status of the power .
Chapter 1 Preparation — About your projector ENGLISH - 21 r Control panel 3 4 1 2 1 Power < v / b > button Sets the projector to the state where the projector is switched off (standby mode) when the <MAIN POWER> switch on the projector is set to <ON> and in projection mode.
Chapter 1 Preparation — Using the remote control 22 - ENGLISH Using the remote control Inserting and removing the batteries (i) (ii) Fig. 1 Fig. 2 1) Open the cover . (Fig. 1) 2) Insert the batteries and close the cover (insert the m side first). (Fig.
ENGLISH - 23 Chapter 2 Getting Started This chapter describes things you need to do before using the projector such as the setup and connections..
Chapter 2 Getting Started — Setting up 24 - ENGLISH Setting up Projection method Y ou can use the projector with any of the following four projection methods.
Chapter 2 Getting Started — Setting up ENGLISH - 25 Screen size and throw distance Refer to the following gures and table describing projection distances to install the projector . Image size and image position can be adjusted in accordance with the screen size and screen position.
Chapter 2 Getting Started — Setting up 26 - ENGLISH For PT -RW330U (The dimensions of the following table contain a slight error .) (Unit: m) Projection screen size 4:3 aspect ratio 16:9 aspect ratio 16:10 aspect ratio Diagonal (SD) Min. projection distance (L W) Max.
Chapter 2 Getting Started — Connecting ENGLISH - 27 Connecting Before connecting f Before connecting, carefully read the operating instructions for the external device to be connected. f T urn off the power of all devices before connecting cables. f T ake note of the following points before connecting the cables.
Chapter 2 Getting Started — Connecting 28 - ENGLISH <HDMI IN> terminal pin assignments and signal names Outside view Pin No. Signal name Pin No. Signal name Even-numbered pins (2) to (18) (1) (19) (2) (18) Odd-numbered pins (1) to (19) (1) T .
Chapter 2 Getting Started — Connecting ENGLISH - 29 Connecting example: Computers &RPSXWHU &RPSXWHU &RPSXWHU &RPSXWHU &RQWUROFRPSXWHU &RQWUROFRPSXWHU Attention f When connecting the projector to a computer or an external device, use the power cord supplied with each device and commercially available shielded cables.
Chapter 2 Getting Started — Connecting 30 - ENGLISH Attention f Always use one of the following when connecting a VCR. g A VCR with built-in time base corrector (TBC) g A time base corrector (TBC) between the projector and the VCR f If nonstandard burst signals are connected, the image may be distorted.
ENGLISH - 31 Chapter 3 Basic Operations This chapter describes basic operations to start with..
Chapter 3 Basic Operations — Switching on/off the projector 32 - ENGLISH Switching on/off the projector Connecting the power cord Make sure that the supplied power cord is securely xed to the projector body to prevent it from being removed easily .
Chapter 3 Basic Operations — Switching on/off the projector ENGLISH - 33 Indicator status Status Off The main power is switched off. Red Flashing The power is switched off (in standby mode). [ST ANDBY MODE] is set to [NORMAL]. Projection will start when the power < v / b > button is pressed.
Chapter 3 Basic Operations — Switching on/off the projector 34 - ENGLISH Making adjustments and selections It is recommended that images are projected continuously for at least 30 minutes before the focus is adjusted. 3) 2) 1) 2) 1) 4) 1) Set the initial settings.
Chapter 3 Basic Operations — Projecting ENGLISH - 35 Projecting Check the external device connections ( x page 27) and the power cord connection ( x page 32), and turn on the projector ( x page 33) to start projecting. Select the video for projection, and adjust appearance of the projected image.
Chapter 3 Basic Operations — Projecting 36 - ENGLISH Adjustment range by the lens position shift (optical shift) Perform the lens position shift within the adjustment range. The focus may change when the lens position is shifted out of the adjustment range.
Chapter 3 Basic Operations — Operating with the remote control ENGLISH - 37 Operating with the remote control Using the A V mute function If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible to turn off the audio and video temporarily .
Chapter 3 Basic Operations — Operating with the remote control 38 - ENGLISH Switching the input The input for projection can be switched. button 1) Press the input selection (<COMPUTER>, <DVI-I>, <VIDEO>, <DIGIT AL LINK>, <HDMI>) buttons.
Chapter 3 Basic Operations — Operating with the remote control ENGLISH - 39 Using the Function button Frequently used operations can be assigned to the buttons from <FUNC1> to <FUNC3> on the remote control to be used as simple shortcut buttons.
40 - ENGLISH Chapter 4 Settings This chapter describes the settings and adjustments you can make using the on-screen menu..
Chapter 4 Settings — Menu navigation ENGLISH - 41 Menu navigation The on-screen menu (Menu) is used to perform various settings and adjustments of the projector . Navigating through the menu Operating procedure button 1) Press the <MENU> button on the remote control or control panel.
Chapter 4 Settings — Menu navigation 42 - ENGLISH Note f Pressing the <RETURN> button or the <MENU> button when the menu screen is displayed returns to the previous menu. f Some items may not be adjusted or used for certain signal formats to be input to the projector .
Chapter 4 Settings — Menu navigation ENGLISH - 43 Main menu item Page [TEST P A TTERN] 82 [SIGNAL LIST] 83 [SECURITY] 85 [NETWORK] 88 [DIGIT AL LINK] 107 Sub-menu The sub-menu of the selected main menu item is displayed, and you can set and adjust items in the sub-menu.
Chapter 4 Settings — Menu navigation 44 - ENGLISH Note f Sub-menu items and factory default settings differ depending on the input terminal that is selected.
Chapter 4 Settings — Menu navigation ENGLISH - 45 [TEST P A TTERN] Details ( x page 82) [SIGNAL LIST] Details ( x page 83) [SECURITY] Sub-menu item Factory default Page [SECURITY P ASSWORD] [OFF] 85.
Chapter 4 Settings — [PICTURE] menu 46 - ENGLISH [PICTURE] menu On the menu screen, select [PICTURE] from the main menu, and select the item from the sub-menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen.
Chapter 4 Settings — [PICTURE] menu ENGLISH - 47 [BRIGHTNESS] Y ou can adjust the dark (black) part of the projected image. 1) Press as to select [BRIGHTNESS]. 2) Press qw or the <ENTER> button. f The [BRIGHTNESS] individual adjustment screen is displayed.
Chapter 4 Settings — [PICTURE] menu 48 - ENGLISH Note f When [COLOR MA TCHING] ( x page 59) adjustment is set to other than [OFF], [COLOR TEMPERA TURE] is xed to [USER]. Adjusting desired white balance 1) Press as to select [COLOR TEMPERA TURE]. 2) Press qw or the <ENTER> button.
Chapter 4 Settings — [PICTURE] menu ENGLISH - 49 Note f When a name is changed, display of the [USER] menu is also changed. [DA YLIGHT VIEW] Y ou can correct the image to the optimal vividness even if it is projected under a bright light. 1) Press as to select [DA YLIGHT VIEW].
Chapter 4 Settings — [PICTURE] menu 50 - ENGLISH [SYSTEM SELECTOR] The projector will automatically detect the input signal, but you can set the system method manually when an unstable signal is input. Set the system method matching the input signal.
Chapter 4 Settings — [POSITION] menu ENGLISH - 51 [POSITION] menu On the menu screen, select [POSITION] from the main menu, and select the item from the sub-menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen.
Chapter 4 Settings — [POSITION] menu 52 - ENGLISH [ASPECT] Y ou can switch the aspect ratio of the image. The aspect ratio is switched within the screen range selected in [SCREEN SETTING]. Set [SCREEN SETTING] rst. ( x page 60) [SCREEN SETTING] is available only on PT -RW330U.
Chapter 4 Settings — [POSITION] menu ENGLISH - 53 Note f When [ASPECT] is set to [NA TIVE], [ZOOM] cannot be adjusted. When [ASPECT] is set to [NORMAL] 1) Press as to select [ZOOM]. 2) Press the <ENTER> button. f The [ZOOM] screen is displayed.
Chapter 4 Settings — [POSITION] menu 54 - ENGLISH [KEYSTONE] Y ou can correct the trapezoidal distortion that occurs when the projector is installed tilted or when the screen is tilted. 1) Press as to select [KEYSTONE]. 2) Press qw or the <ENTER> button.
Chapter 4 Settings — [ADV ANCED MENU] menu ENGLISH - 55 [ADV ANCED MENU] menu On the menu screen, select [ADV ANCED MENU] from the main menu, and select the item from the sub-menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen.
Chapter 4 Settings — [ADV ANCED MENU] menu 56 - ENGLISH Blanking correction Item Operation Adjustment Range Left side of the screen [LEFT] Press the w button. The blanking zone moves to the right. Left and right: 0 (lower limit) Press the q button. The blanking zone moves to the left.
Chapter 4 Settings — [ADV ANCED MENU] menu ENGLISH - 57 [FRAME RESPONSE] If 1 080/60i, 1 080/50i, or 1 080/24sF signals are input, the video frame delay can be shortened by simplifying video processing. 1) Press as to select [FRAME RESPONSE]. 2) Press qw to switch [FRAME RESPONSE].
Chapter 4 Settings — [DISPLA Y LANGUAGE] menu 58 - ENGLISH [DISPLA Y LANGUAGE] menu On the menu screen, select [DISPLA Y LANGUAGE] from the main menu, and display the sub- menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen.
Chapter 4 Settings — [DISPLA Y OPTION] menu ENGLISH - 59 [DISPLA Y OPTION] menu On the menu screen, select [DISPLA Y OPTION] from the main menu, and select the item from the sub-menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen.
Chapter 4 Settings — [DISPLA Y OPTION] menu 60 - ENGLISH Adjusting the color matching using a colorimeter Use a colorimeter that can measure chromaticity coordinates and luminance to change the colors [RED], [GREEN], [BLUE], [CY AN], [MAGENT A], [YELLOW], or [WHITE] to desired colors.
Chapter 4 Settings — [DISPLA Y OPTION] menu ENGLISH - 61 [AUTO SIGNAL] Set automatic execution of auto setup. The screen display position or signal level can be adjusted automatically without pressing the <AUT O SETUP> button on the remote control on each occasion if you input unregistered signals frequently at meetings, etc.
Chapter 4 Settings — [DISPLA Y OPTION] menu 62 - ENGLISH [DVI-I IN] Switch the setting when the external equipment is connected to the <DVI-I IN> terminal of the projector and the image is not projected correctly . When digital signals are input 1) Press as to select [DVI-I IN].
Chapter 4 Settings — [DISPLA Y OPTION] menu ENGLISH - 63 [HDMI IN] Switch the setting when an external device is connected using the <HDMI IN> terminal of the projector and t he image is not projected correctly . 1) Press as to select [HDMI IN].
Chapter 4 Settings — [DISPLA Y OPTION] menu 64 - ENGLISH 4) Press qw to switch [OSD POSITION]. f The items will switch each time you press the button. [5] Sets to the center of the screen. [6] Sets to the bottom center of the screen. [7] Sets to the upper right of the screen.
Chapter 4 Settings — [DISPLA Y OPTION] menu ENGLISH - 65 Setting [INPUT GUIDE] Set display of the input guide (display of the currently selected input terminal name, signal name, and memory number) in the position set by the [OSD POSITION]. 1) Press as to select [ON-SCREEN DISPLA Y].
Chapter 4 Settings — [DISPLA Y OPTION] menu 66 - ENGLISH 4) Press qw to switch [MODE]. f The items will switch each time you press the button. [CC1] Displays CC1 data.
Chapter 4 Settings — [DISPLA Y OPTION] menu ENGLISH - 67 [SUB MEMOR Y LIST] The projector has a sub memory function that can register the multiple image adjustment data, even if it is recognized as the same signal by the frequency or format of the synchronization signal source.
Chapter 4 Settings — [DISPLA Y OPTION] menu 68 - ENGLISH [A V MUTE] Image and audio are muted when the projector is not used for a certain period of time. 1) Press as to select [A V MUTE]. 2) Press the <ENTER> button. f Press the <RETURN> button to release.
Chapter 4 Settings — [PROJECTOR SETUP] menu ENGLISH - 69 [PROJECT OR SETUP] menu On the menu screen, select [PROJECTOR SETUP] from the main menu, and select the item from the sub-menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen.
Chapter 4 Settings — [PROJECTOR SETUP] menu 70 - ENGLISH [COOLING CONDITION] Change the fan control depending on the direction of projection. Set [COOLING CONDITION] correctly in accordance with the direction of projection referencing the following gure.
Chapter 4 Settings — [PROJECTOR SETUP] menu ENGLISH - 71 Setting [AUTO POWER SA VE] Set whether to enable the three functions [AMBIENT LIGHT DETECTION], [SIGNAL DETECTION], and [A V MUTE DETECTION]. 1) Press as to select [ECO MANAGEMENT]. 2) Press the <ENTER> button.
Chapter 4 Settings — [PROJECTOR SETUP] menu 72 - ENGLISH 4) Press qw to switch [ST ANDBY MODE]. f The items will switch each time you press the button. [ECO] Use this setting to reduce power consumption during standby . [NORMAL] Use this setting to use the network function during standby .
Chapter 4 Settings — [PROJECTOR SETUP] menu ENGLISH - 73 3) Select and assign program to each day of week. f Press as to select the day of week, and press qw to select a program number . f Y ou can set the program from No.1 to No.7. “- - -” indicates that the program number has not been set yet.
Chapter 4 Settings — [PROJECTOR SETUP] menu 74 - ENGLISH 12) Press the <ENTER> button. f The command is xed and ● is displayed at the left of the selected command. f After the command is xed, press the <RETURN> button or the <MENU> button to close the detailed setting menu.
Chapter 4 Settings — [PROJECTOR SETUP] menu ENGLISH - 75 [DIGIT AL LINK INPUT] Can only be selected when [ST ARTUP INPUT SELECT] is set to [DIGIT AL LINK]. 1) Press as to select [DIGIT AL LINK INPUT]. 2) Press qw to switch [DIGIT AL LINK INPUT]. f The items will switch each time you press the button.
Chapter 4 Settings — [PROJECTOR SETUP] menu 76 - ENGLISH Communicating using the <DIGIT AL LINK/LAN> terminal 1) Press as to select [RS-232C]. 2) Press the <ENTER> button. f The [RS-232C] screen is displayed. 3) Press as to select [INPUT SELECT].
Chapter 4 Settings — [PROJECTOR SETUP] menu ENGLISH - 77 Note f Refer to “<SERIAL IN> terminal” ( x page 1 18). f When [DIGIT AL LINK] is selected, communication is only available using the serial terminal when the relevant device (such as an optional digital interface box (Model No.
Chapter 4 Settings — [PROJECTOR SETUP] menu 78 - ENGLISH Setting the audio output during standby 1) Press as to select [AUDIO SETTING]. 2) Press the <ENTER> button. f The [AUDIO SETTING] screen is displayed. 3) Press as to select [IN ST ANDBY MODE].
Chapter 4 Settings — [PROJECTOR SETUP] menu ENGLISH - 79 [ST A TUS] Displays the status of the projector . 1) Press as to select [ST A TUS]. 2) Press the <ENTER> button. f The [ST A TUS] screen is displayed. 3) Press qw to switch the pages. f The page will change each time you press the button.
Chapter 4 Settings — [PROJECTOR SETUP] menu 80 - ENGLISH Setting the date and time automatically 1) Press as to select [DA TE AND TIME]. 2) Press the <ENTER> button. f The [DA TE AND TIME] screen is displayed. 3) Press as to select [ADJUST CLOCK].
Chapter 4 Settings — [PROJECTOR SETUP] menu ENGLISH - 81 [INITIALIZE] Return various setting values to their factory default settings. 1) Press as to select [INITIALIZE]. 2) Press the <ENTER> button. f The [SECURITY P ASSWORD] screen is displayed.
Chapter 4 Settings — [TEST P A TTERN] menu 82 - ENGLISH [TEST P A TTERN] menu On the menu screen, select [TEST P A TTERN] from the main menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen. f Press qw to switch.
Chapter 4 Settings — [SIGNAL LIST] menu ENGLISH - 83 [SIGNAL LIST] menu On the menu screen, select [SIGNAL LIST] from the main menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen. r Registered signal details f A name can be set for each sub memory ( x page 67).
Chapter 4 Settings — [SIGNAL LIST] menu 84 - ENGLISH Deleting the registered data Registered signals can be deleted. 1) Press asqw to select the signal to delete. 2) Press the <DEF AUL T> button. f The [ENTR Y SIGNAL DELETE] screen is displayed.
Chapter 4 Settings — [SECURITY] menu ENGLISH - 85 [SECURITY] menu On the menu screen, select [SECURITY] from the main menu, and select the item from the sub-menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen.
Chapter 4 Settings — [SECURITY] menu 86 - ENGLISH [TEXT DISPLA Y] Overlap the security message (text) over the projecting image. 1) Press as to select [TEXT DISPLA Y]. 2) Press qw to switch [TEXT DISPLA Y]. f The items will switch each time you press the button.
Chapter 4 Settings — [SECURITY] menu ENGLISH - 87 [CONTROL DEVICE SETUP] Enable/disable the button operations on the control panel and the remote control. 1) Press as to select [CONTROL DEVICE SETUP]. 2) Press the <ENTER> button. f The [CONTROL DEVICE SETUP] screen is displayed.
Chapter 4 Settings — [NETWORK] menu 88 - ENGLISH [NETWORK] menu On the menu screen, select [NETWORK] from the main menu, and select the item from the sub-menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen.
Chapter 4 Settings — [NETWORK] menu ENGLISH - 89 7) When the confirmation is displayed, select [OK] or [CANCEL], and press the <ENTER> button. Note f Not compatible with 10BaseT Full/Half. When the projector is connected directly via a twisted-pair-cable transmitter 1) Press as to select [DIGIT AL LINK SETUP].
Chapter 4 Settings — [NETWORK] menu 90 - ENGLISH [NETWORK SETUP] Perform the initial setting of the network before using the network function. 1) Press as to select [NETWORK SETUP]. 2) Press the <ENTER> button. f The [NETWORK SETUP] screen is displayed.
Chapter 4 Settings — [NETWORK] menu ENGLISH - 91 [NETWORK ST A TUS] Display the status of the projector network. 1) Press as to select [NETWORK ST A TUS].
Chapter 4 Settings — [NETWORK] menu 92 - ENGLISH Connecting to a twisted-pair-cable transmitter The projector has a function that can receive Ethernet signals from a twisted-pair-cable transmitter together with video and audio signals via a LAN cable.
Chapter 4 Settings — [NETWORK] menu ENGLISH - 93 Accessing from the web browser 1) Start up the web browser on the computer . 2) Enter the IP address set on the projector into the URL entry field of the web browser . 3) Enter the user name and the password.
Chapter 4 Settings — [NETWORK] menu 94 - ENGLISH Descriptions of items 1 2 3 4 5 6 1 Page tab Switches pages by clicking it. 2 [Status] The status of the projector is displayed by clicking this item. 3 [Projector control] The [Projector control] page is displayed by clicking this item.
Chapter 4 Settings — [NETWORK] menu ENGLISH - 95 Error information page When [Error (Detail)] is displayed in the self-diagnosis display of the [Projector status] screen, click it to display the error details. f The projector may go into the standby status to protect the projector depending on the contents of the error .
Chapter 4 Settings — [NETWORK] menu 96 - ENGLISH [Access error] page Click [Status] → [Access error]. The error log on the WEB server is displayed such as access to the pages that do not exist or access with unauthorized user names or passwords. [Mail error] page Click [Status] → [Mail error].
Chapter 4 Settings — [NETWORK] menu ENGLISH - 97 [Advanced control] page Click [Projector control] → [Advanced control]. 1 2 1 [POSITION] Operates items related to angle of view . 2 [PICTURE] Operates items related to image quality . [Network cong] page Click [Detailed set up] → [Network cong].
Chapter 4 Settings — [NETWORK] menu 98 - ENGLISH [Ping test] page Y ou can check whether the network is connected to the E-mail server , POP server , DNS server , etc. Click [Detailed set up] → [Ping test]. 1 2 3 4 1 [Input IP address] Enter the IP address of the server to be tested.
Chapter 4 Settings — [NETWORK] menu ENGLISH - 99 [E-mail set up] page When there is a problem, an email can be sent to preset email addresses (up to two addresses). Click [Detailed set up] → [E-mail set up]. 1 2 3 4 5 6 1 [ENABLE] Select [Enable] to use the E-mail function.
Chapter 4 Settings — [NETWORK] menu 100 - ENGLISH 11 10 9 9 [E-MAIL ADDRESS 2] Enter the E-mail address to be sent when two E-mail addresses are to be used. Leave it blank when two E-mail addresses are not to be used. 10 Settings of the conditions to send E-mail Select the conditions to send E-mail to the second E-mail address.
Chapter 4 Settings — [NETWORK] menu ENGLISH - 101 Contents of mail sent Example of E-mail sent when E-mail is set The following E-mail is sent when the E-mail settings have been established.
Chapter 4 Settings — [NETWORK] menu 102 - ENGLISH Example of the E-mail sent for an error The following E-mail is sent when an error has occurred. === Panasonic projector report(ERROR) === Projector.
Chapter 4 Settings — [NETWORK] menu ENGLISH - 103 User name [Change password] page Click [Change password]. 1 2 3 1 [Administrator] Used to change the setting of [Administrator]. 2 [User] Used to change the setting of [User]. 3 [Next] Used to change the setting of the password.
Chapter 4 Settings — [NETWORK] menu 104 - ENGLISH [User] account 1 2 3 5 4 1 [Account] Displays the account to change. 2 [New][User name] Enter the desired new user name. (Up to 16 characters in single byte) 3 [New][Password] Enter the desired new password.
Chapter 4 Settings — [NETWORK] menu ENGLISH - 105 [CRESTRON RoomView] page The projector can be monitored and/or controlled with RoomView . T o start the RoomView control page from the web control screen, you need to access with the administrator rights.
Chapter 4 Settings — [NETWORK] menu 106 - ENGLISH [Info] page Click [Info] on the control page. 4 5 6 7 1 2 3 8 1 [Projector Name] Displays the projector name. 2 [Mac Address] Displays the MAC address. 3 [Lamp Hours] Displays the cumulative operating time (converted value) of the projector .
Chapter 4 Settings — [DIGIT AL LINK] menu ENGLISH - 107 [DIGIT AL LINK] menu On the menu screen, select [DIGIT AL LINK] from the main menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen. Switch the input to DIGIT AL LINK.
108 - ENGLISH Chapter 5 Maintenance This chapter describes inspection when there are problems, and maintenance methods..
Chapter 5 Maintenance — Light source/temperature indicator ENGLISH - 109 Light source/temperature indicator Managing the indicated problems If a problem should occur inside the projector , the light source indicator <LIGHT>/temperature indicator <TEMP> will inform you by lighting or ashing.
Chapter 5 Maintenance — Light source/temperature indicator 1 10 - ENGLISH T emperature indicator <TEMP> Indicator status Lighting in red Flashing in red (1 time) Flashing in red (2 time) Flashing in red (3 time) Status W arm-up status Internal temperature is high (warning).
Chapter 5 Maintenance — Maintenance ENGLISH - 1 1 1 Maintenance Before maintaining the projector f Make sure to turn off the power before maintaining the projector . ( x pages 32, 34) f When switching off the projector , make sure to follow the procedures in “Switching off the projector” ( x page 34).
Chapter 5 Maintenance — T roubleshooting 1 12 - ENGLISH T roubleshooting Review the following points. For details, refer to the corresponding pages. Problems Points to be checked Page Power does not turn on.
Chapter 5 Maintenance — T roubleshooting ENGLISH - 1 13 Attention f If problems persist even after checking the preceding points, consult your dealer .
1 14 - ENGLISH Chapter 6 Appendix This chapter describes specications and after-sales service for the projector ..
Chapter 6 Appendix — T echnical information ENGLISH - 1 15 T echnical information PJLink protocol The network function of this projector supports the PJLink class 1, and the PJLink protocol can be used to perform projector setting and projector status query operations from a computer .
Chapter 6 Appendix — T echnical information 1 16 - ENGLISH Control commands via LAN When web control administrator rights password is set (Protect mode) Connecting 1) Obtain the IP address and port number (Initial set value = 1024) of the projector and request for a connection to the projector .
Chapter 6 Appendix — T echnical information ENGLISH - 1 17 r Error response Character string Details T ermination symbol Message “ERR1” Undened control command (CR) 0x0d “ERR2” Out of par.
Chapter 6 Appendix — T echnical information 1 18 - ENGLISH r Error response Character string Details T ermination symbol Message “ERR1” Undened control command (CR) 0x0d “ERR2” Out of par.
Chapter 6 Appendix — T echnical information ENGLISH - 1 19 Communication conditions (Factory default) Signal level RS-232C-compliant Sync. method Asynchronous Baud rate 9 600 bps Parity None Charact.
Chapter 6 Appendix — T echnical information 120 - ENGLISH Cable specication 1& 1& 1& 1& 1& 1& .
Chapter 6 Appendix — T echnical information ENGLISH - 121 List of compatible signals The following table species the types of signals compatible with the projector . f Signals that show formats are as follows. g V : Video g R: RGB g Y : YC B C R /YP B P R g D: DVI-I g H: HDMI Mode Resolution (Dots) Scanning frequency Dot clock freq.
Chapter 6 Appendix — T echnical information 122 - ENGLISH Mode Resolution (Dots) Scanning frequency Dot clock freq. (MHz) Format Plug and play *1 Horizontal (kHz) V ertical (Hz) COMPUTER/ DVI-I Analog EDID DVI-I digital HDMI/ DIGIT AL LINK EDID1 EDID2 EDID3 SXGA 1 280 x 1 024 64.
Chapter 6 Appendix — Specications ENGLISH - 123 Specications The following table describes the specications of the projector . Model No. PT -RZ370U PT -RW330U Power supply AC 100 V - 240 V 50 Hz/60 Hz Power consumption 460 W (5.2 A - 2.0 A) 0.
Chapter 6 Appendix — Specications 124 - ENGLISH Model No. PT -RZ370U PT -RW330U Color system 7 standards (NTSC/NTSC4.43/P AL/P AL-N/P AL-M/SECAM/P AL60) Projection screen size 1.
Chapter 6 Appendix — Dimensions ENGLISH - 125 Dimensions Units: mm 415.4 (16-11/32") 408.7 (16-3/32") 137 (5-13/32") 128.5 (5-1/16") 125 (4-29/32") 63.5 (2-1/2") 63.5 (2-1/2") 72 (2-27/32") 72 (2-27/32") 455 (17-29/32") * Actual dimensions may differ depending on the product.
Chapter 6 Appendix — Ceiling mount bracket safeguards 126 - ENGLISH Ceiling mount bracket safeguards f When installing the projector to a ceiling, be sure to use the specied ceiling mount bracket (Model No.: ET -PKR100H (for high ceilings), ET -PKR100S (for low ceilings)).
ENGLISH - 127 Index A Accessories ……………………………………… 17 <AC IN> terminal ………………………………… 20 Adjusting adjustable feet …………………….
Information on Disposal in other Countries outside the European Union These symbols are only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Panasonic PT-RW330U c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Panasonic PT-RW330U - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Panasonic PT-RW330U, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Panasonic PT-RW330U va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Panasonic PT-RW330U, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Panasonic PT-RW330U.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Panasonic PT-RW330U. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Panasonic PT-RW330U ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
